Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
Tender Value
Refer Docs
EMD Value
₹80,000
Closing Date
12 Apr 2024, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SE EWC Gorakhpur
Srirampuram Colony Mohaddipur Gorakhpur
Increasing Capacity of under EDC Maharajganj
2024_PVVNV_920946_1
55/EWC(G)/2023-24
Open Tender
Electrical Works
Item Wise
30 days
Mahrajganj
Please refer Tender documents.
2 documents required · 2 mandatory
₹3,540
SE EWC Gorakhpur
₹80,000
Yes
10 May 2024
1 Apr 2024
15 Apr 2024
1 Apr 2024
12 Apr 2024
1 Apr 2024
Amount
(WORK No. 01) PART - A- MATERIAL PROVIDED BY CONTRACTOR
33 KV ‘XLPE’ C/J Kit 3x300mm² Outdoor
33 KV ‘V’ Type Cross Arm 100x50x6mm, MS Channel ( 7.9 Kg/m)
33 KV Polymer Pin Insulator
Number Plate
Danger Board with Clamp
Barbed wire
Bolts, Nuts, & Washers
Complete Stay (GI Stay rod 20x1800mm, stay wire 7/8 SWG 10 Kg, stay clamp, bolt, nut& washer with concerte grouting)
X-arm clamp with Clamp for ST Pole 11mtr. with Nut and Bolt by 50x8 mm MS Flat Iron make.
MS Earthing Rod 20x2500 mm
33 KV Polymer Disc Insulator 70 KN B&S Type
Disc fitting 70 KN B&S Type for DOG
P.G. Clamp for DOG
‘E’ Bracket for 33 KV
M.S. Angle Iron 65x65x6mm bracing with clamps
33 KV. Top channel ( 125x65mmX3200 mm ( 10.7 Kg/m) with clamps
33 KV Guarding angle
GI Wire 5 mm
33 KV Guarding angle Clamp with nut bolt for ST Pole 11mtr. with Nut and Bolt by 50x8 mm MS Flat Iron make.
F-bracket with nut bolt for ST Pole 11 mtr & PCC Pole 9 mtr with nut bolt by 50x8 mm MS flat Iron make
Alluminium Paint
Red Oxide Paint
PART- B WORK (DETAILS OF WORK) Shifting,loading and carriage of following materials on private truck at store centre Maharajganj & Un-loading of the same with proper stacking at work site .
S.T. Pole – 11 Mtr. Long
33 KV ‘XLPE’ Cable 3x300mm²
ACSR ‘Dog’ Conductor
Laying of 33 KV 3x300 mm² ‘XLPE’ cable of double circuit by digging pit below ground level by fixing bricks(4½˝)on both side of trench wall and 9˝ brick work at the centre of the trench along the cable.Fixing brick slab on top after filling sand around both the cable including cost of bricks/ HDD Method by drilling machine as per site requirement.
Laying of 33KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long Complete work.(Rs 1475/mtr)
Providing & Cable jointing charges of 33 KV XLPE Cable Outdoor.
GI Pipe Earthing Complete for Cable jointing Kit with materials
Erection of Single pole structure on 11mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above & fitting of all accessories for single circuit ( 'V' type cross arm 100 x 50 x 6 mm, M.S. Channel (7.9 Kg./M) clamps with bolt and nut, composite polymer pin, insulator, danger board with clamp, Alluminium paint, red oxide paint, barbed wire earthing, etc. complete as per RESSPO.
Erection of Double pole structure on 11 mtr ST Pole including all works of evocation of pit, pole erection & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Alluminium paint, red oxide paint, barbed wire earthing, etc. complete as per RESSPO) .
Erection of four pole structure on 11 mtr ST Pole including all works of evocation of pit, pole erection & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Alluminium paint, red oxide paint, barbed wire earthing, etc. complete as per RESSPO) .
Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.
Grouting of stay rods (20 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.
Grouting of ST Pole in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & making plinth for pole 30 cm above from ground level.
Painting of S.T Pole 11 mtr. Long with Alluminium paint and red oxide paint etc.
Chopping of branches of trees of eucalyptus, Neem, Keekar and other kind of trees along the route of the line and disposal of the same at suitable place.
Maintanance of old 33 KV line Nautanwa Tehsil from 132 KV S/S Anand Nagar to Tapping Point Jhamat Dhala, Maharajganj.
Guarding between two poles like single poles, double poles, four poles, etc. to guard LT, 11 KV Line telephone and river crossing, road crossing etc. with G.I. wire no. 6 SWG and G.I. wire no. 8 SWG, cutting, fabrication and fixing of guarding channel 75 x 40 x 3010 mm with clamps nut & bolts etc. as per drawing.
(WORK No. 02) Shifting & loading of following materials on private truck at store centre Maharajganj & carriage up to 33/11 KV Sub-Station Bhitauli, Distt- Maharajganj & Un-loading of the same with proper stacking (Distance about 0 to 55 km)
11 KV ‘XLPE’ power cable.
33 KV ‘VCB’ complete with all structure.
33 Bus Isolator
33 KV Post Insulator
Structure for Above
33 KV Single T/F Control pannel
33 KV lightening arrester
33 KV LA Structure.
Repairing of plinth and foundation for 10 MVA transformer as per required specification. Dismantling of T/F all connection.
Dismentling of existing 2 no body and 1 no Neutral earthing safely of existing 5 MVA power transformer earthing for installation of new 10 MVA T/F and re-earthing of new 10 MVA T/F by old earth strip including providing required length of GI Earth strip .The earthing of 10 MVA T/F Included all work completed as per required specification of RESSPO norms.
Providing 33 KV. Top channel for cable stand & neutral earthing
Dismentling of HT jumpers, 11 KV C/J kit and different earthing of 5 MVA T/F drain out T/F oil after closing wall and opening of radiator for shifting of existing 5 MVA T/F from plinth about 30 mtr. Distance & resetting of All accessories etc. complete work.
Digging of pit for taking out of old & used running condition 11 KV cable safely.
Grouting of M.S. channel 3.2 mtr long for cable stand and welding of M.S. flat at equal distance for fastening cable by clamp with nuts and bolts mounting of cable at cable stand and connection of jumpers.
Providing & Jointing charges of 11 KV “XLPE” C/J kit 3 x 300 mm2 Indoor/Outdoor type
Providing & Jointing charges of 11 KV “XLPE” C/J kit 3 x 185 mm2 Indoor/Outdoor type
Laying of 11 KV “XLPE” power cable 3 x 300/185 mm2 including digging of pits of size 0.5 x 0.5 mtr. covering of cable with sand and 1st class brick around the cable.
Laying of 11KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long Complete work.
GI Pipe Earthing Complete for Cable jointing Kit with materials
Neutral earthing of 10 MVA T/F Complete including cost of GI Strip, GI Pipe 1.5" dia and 30' long and other earthing materials(Delta type).
Providing and Making connection of 24 Volt battery and battery charger with cabinet.
Jumpring from 33 KV Bus bar to post insulator, bus isolator, VCB, CT and LA to 10 MVA transformer etc.( Providing alluminium Lug and PG Clamp)
Installation of 33 KV control panel for “VCB” with complete earthing with installation of battery and battery charger in control room and making connection.
Erection,Installation and grouting of “VCB” Structure mounting and fitting of “VCB” on erected structure with complete earthing.
Erection,Installation and grouting of “CT” Structure mounting and fitting of “CT” on erected structure with complete earthing.
Erection,Installation and grounting of LA structure. mounting and fitting of LA on erected structure with complete earthing.
Mounting and fitting of equipment on erected structures.
33 KV Bus – Isolator 400 Amp.
33 KV Post Insulator
Painting of erected structure in switchyard (Applying on coat of good quality red oxide primer then two coat of good quality of high class luxol aluminium paint)
Providing following control cable and its laying from switchyard to control room 33 KV panel by digging trench in switchyard including cost of sand and 1st class bricks with covering and making connection complete and including cost of laying.
Size 2 x 2.5 mm2
Size 4 x 2.5 mm2
Dismantling of existing pale fencing and resetting after completion of transformer work.
(WORK No. 03) Shifting & loading of following materials on private truck at store centre Maharajganj & carriage up to 33/11 KV Sub-Station Brijamanganj, Distt- Maharajganj & Un-loading of the same with proper stacking (Distance about 0 to 55 km)
11 KV ‘XLPE’ power cable.
33 KV ‘VCB’ complete with all structure.
33 KV C.T.Structure
33 KV Fuse Set
33 KV Fuse Set Structure
33 Bus Isolator
33 KV Post Insulator
Structure for Above
33 KV Single T/F Control pannel
33 KV lightening arrester
33 KV LA Structure.
33 KV P.T.Structure
Repairing of plinth and foundation for 10 MVA transformer as per required specification. Dismantling of T/F all connection.
Dismentling of existing 2 no body and 1 no Neutral earthing safely of existing 5 MVA power transformer earthing for installation of new 10 MVA T/F and re-earthing of new 10 MVA T/F by old earth strip including providing required length of GI Earth strip .The earthing of 10 MVA T/F Included all work completed as per required specification of RESSPO norms.
Providing 33 KV. Top channel for cable stand & neutral earthing
Dismentling of HT jumpers, 11 KV C/J kit and different earthing of 5 MVA T/F drain out T/F oil after closing wall and opening of radiator for shifting of existing 5 MVA T/F from plinth about 30 mtr. Distance & resetting of All accessories etc. complete work.
Digging of pit for taking out of old & used running condition 11 KV cable safely.
Grouting of M.S. channel 3.2 mtr long for cable stand and welding of M.S. flat at equal distance for fastening cable by clamp with nuts and bolts mounting of cable at cable stand and connection of jumpers.
Providing & Jointing charges of 11 KV “XLPE” C/J kit 3 x 300 mm2 Indoor/Outdoor type
Providing & Jointing charges of 11 KV “XLPE” C/J kit 3 x 185 mm2 Indoor/Outdoor type
Laying of 11 KV “XLPE” power cable 3 x 300/185 mm2 including digging of pits of size 0.5 x 0.5 mtr. covering of cable with sand and 1st class brick around the cable.
Laying of 11KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long Complete work.
GI Pipe Earthing Complete for Cable jointing Kit with materials
Neutral earthing of 10 MVA T/F Complete including cost of GI Strip, GI Pipe 1.5" dia and 30' long and other earthing materials(Delta type).
Providing and Making connection of 24 Volt battery and battery charger with cabinet.
Jumpring from 33 KV Bus bar to post insulator, bus isolator, VCB, CT and LA to 10 MVA transformer etc.( Providing alluminium Lug and PG Clamp)
Installation of 33 KV control panel for “VCB” with complete earthing with installation of battery and battery charger in control room and making connection.
Erection,Installation and grouting of “VCB” Structure mounting and fitting of “VCB” on erected structure with complete earthing.
Erection,Installation and grouting of “CT” Structure mounting and fitting of “CT” on erected structure with complete earthing.
Erection,Installation and grouting of “PT” Structure mounting and fitting of “PT” on erected structure with complete earthing.
Erection,Installation and grounting of Fuse Set structure. mounting and fitting of Fuse Set on erected structure with complete earthing.
Erection,Installation and grounting of LA structure. mounting and fitting of LA on erected structure with complete earthing.
Mounting and fitting of equipment on erected structures.
33 KV Bus – Isolator 400 Amp.
33 KV Post Insulator
Painting of erected structure in switchyard (Applying on coat of good quality red oxide primer then two coat of good quality of high class luxol aluminium paint)
Providing following control cable and its laying from switchyard to control room 33 KV panel by digging trench in switchyard including cost of sand and 1st class bricks with covering and making connection complete and including cost of laying.
Size 2 x 2.5 mm2
Size 4 x 2.5 mm2
Dismantling of existing pale fencing and resetting after completion of transformer work.
(WORK No. 04) Shifting & loading of following materials on private truck at store centre Maharajganj & carriage up to 33/11 KV Sub-Station Siswa, Distt- Maharajganj & Un-loading of the same with proper stacking (Distance about 0 to 55 km)
11 KV ‘XLPE’ power cable.
33 KV ‘VCB’ complete with all structure.
33 KV C.T.Structure
33 KV Fuse Set
33 KV Fuse Set Structure
33 Bus Isolator
33 KV Post Insulator
Structure for Above
33 KV Single T/F Control pannel
33 KV lightening arrester
33 KV LA Structure.
33 KV P.T.Structure
Repairing of plinth and foundation for 10 MVA transformer as per required specification. Dismantling of T/F all connection.
Dismentling of existing 2 no body and 1 no Neutral earthing safely of existing 5 MVA power transformer earthing for installation of new 10 MVA T/F and re-earthing of new 10 MVA T/F by old earth strip including providing required length of GI Earth strip .The earthing of 10 MVA T/F Included all work completed as per required specification of RESSPO norms.
Providing 33 KV. Top channel for cable stand & neutral earthing
Dismentling of HT jumpers, 11 KV C/J kit and different earthing of 5 MVA T/F drain out T/F oil after closing wall and opening of radiator for shifting of existing 5 MVA T/F from plinth about 30 mtr. Distance & resetting of All accessories etc. complete work.
Digging of pit for taking out of old & used running condition 11 KV cable safely.
Grouting of M.S. channel 3.2 mtr long for cable stand and welding of M.S. flat at equal distance for fastening cable by clamp with nuts and bolts mounting of cable at cable stand and connection of jumpers.
Providing & Jointing charges of 11 KV “XLPE” C/J kit 3 x 300 mm2 Indoor/Outdoor type
Providing & Jointing charges of 11 KV “XLPE” C/J kit 3 x 185 mm2 Indoor/Outdoor type
Laying of 11 KV “XLPE” power cable 3 x 300/185 mm2 including digging of pits of size 0.5 x 0.5 mtr. covering of cable with sand and 1st class brick around the cable.
Laying of 11KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long Complete work.
GI Pipe Earthing Complete for Cable jointing Kit with materials
Neutral earthing of 10 MVA T/F Complete including cost of GI Strip, GI Pipe 1.5" dia and 30' long and other earthing materials(Delta type).
Providing and Making connection of 24 Volt battery and battery charger with cabinet.
Jumpring from 33 KV Bus bar to post insulator, bus isolator, VCB, CT and LA to 10 MVA transformer etc.( Providing alluminium Lug and PG Clamp)
Installation of 33 KV control panel for “VCB” with complete earthing with installation of battery and battery charger in control room and making connection.
Erection,Installation and grouting of “VCB” Structure mounting and fitting of “VCB” on erected structure with complete earthing.
Erection,Installation and grouting of “CT” Structure mounting and fitting of “CT” on erected structure with complete earthing.
Erection,Installation and grouting of “PT” Structure mounting and fitting of “PT” on erected structure with complete earthing.
Erection,Installation and grounting of Fuse Set structure. mounting and fitting of Fuse Set on erected structure with complete earthing.
Erection,Installation and grounting of LA structure. mounting and fitting of LA on erected structure with complete earthing.
Mounting and fitting of equipment on erected structures.
33 KV Bus – Isolator 400 Amp.
33 KV Post Insulator
Painting of erected structure in switchyard (Applying on coat of good quality red oxide primer then two coat of good quality of high class luxol aluminium paint)
Providing following control cable and its laying from switchyard to control room 33 KV panel by digging trench in switchyard including cost of sand and 1st class bricks with covering and making connection complete and including cost of laying.
Size 2 x 2.5 mm2
Size 4 x 2.5 mm2
Dismantling of existing pale fencing and resetting after completion of transformer work.
(WORK No. 05) PART - A- MATERIAL PROVIDED BY CONTRACTOR
33 KV ‘XLPE’ C/J Kit 3x300mm² Outdoor
33 KV ‘V’ Type Cross Arm 100x50x6mm, MS Channel ( 7.9 Kg/m)
33 KV Polymer Pin Insulator
Number Plate
Danger Board with Clamp
Barbed wire
Bolts, Nuts, & Washers
Complete Stay (GI Stay rod 20x1800mm, stay wire 7/8 SWG 10 Kg, stay clamp, bolt, nut& washer with concerte grouting)
X-arm clamp with Clamp for PCC Pole 9 mtr./ST Pole 11mtr. with Nut and Bolt by 50x8 mm MS Flat Iron make.
MS Earthing Rod 20x2500 mm
33 KV Polymer Disc Insulator 70 KN B&S Type
Disc fitting 70 KN B&S Type for DOG
P.G. Clamp for DOG
‘E’ Bracket for 33 KV
M.S. Angle Iron 65x65x6mm bracing with clamps
33 KV. Top channel ( 125x65mmX3200 mm ( 10.7 Kg/m) with clamps
33 KV Guarding angle
GI Wire 5 mm
33 KV Guarding angle Clamp with nut bolt for PCC Pole 9mtr./ST Pole 11mtr. with Nut and Bolt by 50x8 mm MS Flat Iron make.
F-bracket with nut bolt for ST Pole 11 mtr & PCC Pole 9 mtr with nut bolt by 50x8 mm MS flat Iron make
Alluminium Paint
Red Oxide Paint
PART- B WORK (DETAILS OF WORK) Shifting,loading and carriage of following materials on private truck at store centre Maharajganj & Un-loading of the same with proper stacking at work site
PCC Pole – 9 Mtr. Long
S.T. Pole – 11 Mtr. Long
33 KV ‘XLPE’ Cable 3x300mm²
ACSR ‘Dog’ Conductor
Laying of 33 KV 3x300 mm² ‘XLPE’ cable of double circuit by digging pit below ground level by fixing bricks(4½˝)on both side of trench wall and 9˝ brick work at the centre of the trench along the cable.Fixing brick slab on top after filling sand around both the cable including cost of bricks/ HDD Method by drilling machine as per site requirement.
Laying of 33KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long Complete work.(Rs 1475/mtr)
Providing & Cable jointing charges of 33 KV XLPE Cable Outdoor.
GI Pipe Earthing Complete for Cable jointing Kit with materials
Erection of Single pole structure on 9 Mtr PCC Pole including all works of evocation of pit, pole erection & fitting of all accessories for single circuit ( 'V' type cross arm 100 x 50 x 6 mm, M.S. Channel (7.9 Kg./M) clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, barbed wire earthing, etc. complete as per RESSPO).
Erection of Double pole structure on 9 Mtr PCC Pole including all works of evocation of pit, pole erection & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete as per RESSPO) .
Erection of Four pole structure on 9 Mtr PCC Pole including all works of evocation of pit, pole erection & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete as per RESSPO) .
Erection of Single pole structure on 11mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above & fitting of all accessories for single circuit ( 'V' type cross arm 100 x 50 x 6 mm, M.S. Channel (7.9 Kg./M) clamps with bolt and nut, composite polymer pin, insulator, danger board with clamp, Alluminium paint, red oxide paint, barbed wire earthing, etc. complete as per RESSPO.
Erection of Double pole structure on 11 mtr ST Pole including all works of evocation of pit, pole erection & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Alluminium paint, red oxide paint, barbed wire earthing, etc. complete as per RESSPO) .
Erection of four pole structure on 11 mtr ST Pole including all works of evocation of pit, pole erection & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Alluminium paint, red oxide paint, barbed wire earthing, etc. complete as per RESSPO) .
Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.
Grouting of stay rods (20 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.
Grouting of ST Pole in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & making plinth for pole 30 cm above from ground level.
Grouting of PCC Pole in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming.
Painting of S.T Pole 11 mtr. Long with Alluminium paint and red oxide paint etc.
Chopping of branches of trees of eucalyptus, Neem, Keekar and other kind of trees along the route of the line and disposal of the same at suitable place.
Guarding between two poles like single poles, double poles, four poles, etc. to guard LT, 11 KV Line telephone and river crossing, road crossing etc. with G.I. wire no. 6 SWG and G.I. wire no. 8 SWG, cutting, fabrication and fixing of guarding channel 75 x 40 x 3010 mm with clamps nut & bolts etc. as per drawing.
m/s apurve enterprises
INDIA SUPPY CORPORATION
Ravi Traders
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .