Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹14.7 Cr
EMD Value
₹14.7 L
Closing Date
17 Apr 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Construction of Two Stored building with Terrace with provision for EI and PH wprks of Biraja Womens college at Jajpur Town,Jajpur,Odisha.
NBCC/SBG/BBSR/DMF-JAJPUR/2023/36
NBCC/SBG/BBSR/DMF-JAJPUR/2023/36
Open Tender-Domestic
Civil Works General
Jajapur, Odisha
₹11,800
₹14.7 L
17 Apr 2023
31 Mar 2023
17 Apr 2023
17 Apr 2023
21 Apr 2023
A CIVIL WORK :
I EARTH WORK 21,15,156.42 8,63,992.03 29,79,148.45
II CONCRETE WORK 39,13,370.79 - 39,13,370.79
III REINFORCED CEMENT CONCRETE WORK 6,23,88,866.12 - 6,23,88,866.12
IV BRICK WORK 98,91,141.30 - 98,91,141.30
V MARBLE & GRANITE WORK 3,83,880.00 2,21,536.54 6,05,416.54
VI WOOD AND P.V.C. WORK 86,78,972.11 7,79,603.86 94,58,575.96
VII STEEL WORK 46,63,244.13 ` 46,63,244.13
VIII FLOORING WORK 4,13,650.00 63,87,874.08 68,01,524.08
IX ROOFING WORK 36,37,940.00 6,82,428.29 43,20,368.29
X FINISHING WORK 98,689.01 35,70,780.95 36,69,469.96
XI WATER PROOFING WORK - 42,99,173.81 42,99,173.81
XII ROAD WORK 9,35,101.40 - 9,35,101.40
XIII LANDSCAPING. 6,76,509.29 - 6,76,509.29
TOTAL (A) 9,77,96,520.57 1,68,05,389.55 11,46,01,910.12
B PLUMBING WORK :
I INTERNAL PH WORKS 33,60,794.46 - 33,60,794.46
II EXTERNAL WATER SUPPLY 30,32,708.56 - 30,32,708.56
III EXTENAL SEWAGE 12,99,351.10 - 12,99,351.10
IV SEPTIC TANK & SOCK PIT. 20,72,052.64 - 20,72,052.64
V WATER TREATMENT PLANT - 2 CUM/HR 9,55,800.00 - 9,55,800.00
VI PUMP ROOM. 8,82,075.28 - 8,82,075.28
TOTAL (B) 1,16,02,782.05 - 1,16,02,782.00
C ELECTRICAL WORKS:
I INTERNAL ELECTRICAL WORKS 77,36,902.22 2,552.36 77,39,454.58
II External ELECTRICAL WORKS 45,24,187.00 - 45,24,187.00
TOTAL (C) 1,22,61,089.22 2,552.36 1,22,63,641.58
D FURNITURE WORK 88,38,200.00 - 88,38,200.00
E TOTAL [A+B+C+D] = [E] 14,73,06,533.70
TOTAL 14,73,06,533.70
RAJESH Digitally signed by RAJESH
DULALCHANDRA MANDAL
DULALCHANDRA Date: 2023.04.07 19:07:34
MANDAL IST
Construction of Two stored building with terrace with provisions for EI & PH works of Biraja Women’s College at
Jajpur Town
Civil Work
AMOUNT NON SOR AMOUNT SOR
SL.NO. SOR/ MR DESCRIPTION OF WORK UNIT QTY. RATE (RS)
I 1.0 EARTH WORK
Earth work in ordinary soil with initial lead and lift including rough dressing in
layers not exceeding 0.3m in depth and the Earth transported by transport
1 SOR vehicles as directed by the Engineer-in-charge. cum 2762.19 143.96 397649.96
Extra lift or 1.5m or part there of over the initial lift of 1.5m in all kinds of
embankments and road works and ordinary earth work in general.
a) 1st Extra lift of 1.5m (up to 7.5m) cum 1320.00 15.37 20289.59
Single under reamed pile foundation with RCC M25 using 12mm size black
hard granite crusher broken chips including cost of borring but excluding
cost of M.S./Tor steel and labour charges for cutting, bending and binding of
steel.
a 375mm dia and 6.0M long. each 170.00 6936.10 1179137.00
Single under reamed pile foundation with RCC M25 using 12mm size black
hard granite crusher broken chips including cost of borring but excluding
cost of M.S./Tor steel and labour charges for cutting, bending and binding of
steel.
a 400mm dia and 6.0M long. each 25.00 7478.80 186970.00
i) For each additional depth of 0.5m beyond initial depth of 6.0m add extra to
b each 70.00 427.90 29953.00
the rate
Filling in foundation and plinth with excavated materials including watering
4 MR and ramming as directed by the Engineer-in-charge of earth work. cum 2750.00 80.00 220000.00
5 MR Transportation of earth from site upto 15km cum 187.35 237.67 44526.83
Filling in foundation and plinth with filling sand, watered and rammed
including cost of material, labour, royality and transportation etc. complete as
6 MR cum 1200.00 361.90 434280.00
per specifications and as directed by Engineer-in-charge.
Supplying chemical emulsion in sealed containers including delivery as
specified.
Chlorpyriphos/ Lindane emulsifiable concentrate of 20% litre 10.74 172.50 1852.06
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-
termite treatment (excluding the cost of chemical emulsion) :Treatment of soil
under existing floors using chemical emulsion @ one litre per hole, 300 mm
8 SOR apart including drilling 12 mm diameter holes and plugging with cement
mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:With
Chlorpyriphos/Lindane E.C. 20% with 1% concentration
TOTAL EARTH WORK 2115156.42 863992.03
CONCRETE WORK
C.C (1:3:6) with 25mm to 40mm size crrusher broken metal including all cost,
9 MR conveyance,royalty & taxes etc.comp.to work site as per specification cum 465.00 4632.10 2153926.50
approved by the department & direction of E.I.C
10 MR Cement concrete (1:2:4) with 12mm size hard broken granite chips.
a 1st floor cum 43.66 6087.00 265784.29
C.C (1:4:8) with 25mm to 40mm size crrusher broken metal including all cost,
11 MR conveyance,royalty & taxes etc.comp.to work site as per specification cum 350.00 4267.60 1493660.00
approved by the department & direction of E.I.C
TOTAL CONCRETE WORK 3913370.79 0.00
III 3.0 REINFORCED CEMENT CONCRETE WORK
Providing M.S. reinforcement for R.C.C. work including cutting, bending,
12 MR binding and tying the grills and placing in position including cost of binding Qtl. 3375.45 10523.01 35519894.10
wire 18 to 20 gauge.
Providing, hoisting laying of Reinforced Cement concrete of Grade M-25
including all material & labour charges and also including shuttering and
13 MR centring but excluding reinforcement etc. complete as per specifications and
as directed by Engineer-in-Charge of the project.
a Footings/pile cap/raft cum 724.00 5318.70 3850738.80
b Column pedestals cum 4.00 11099.90 44406.70
c Columns below plinth cum 125.00 11099.90 1387487.50
d Grade slab under floor on plinth lvl. cum 425.00 9481.20 4029510.00
e Plinth beam cum 119.00 5674.50 675265.50
f Slab cum 1018.00 9481.20 9651861.60
g Wash basine counters cum 4.28 810.50 3472.18
h Chhajjah cum 4.66 810.50 3778.55
i S/C flight cum 42.00 10647.50 447195.00
j Slab beam cum 392.00 11099.90 4351160.80
k Lintels on doors & windows cum 66.85 8864.80 592611.88
l Columns above plinth cum 165.00 11099.90 1831483.50
TOTAL REINFORCED CEMENT CONCRETE WORK 62388866.12 0.00
IV 4.0 BRICK WORK
Brick work withFly ash bricks 25 cm x 12 cmx8cm size having crushing
14 MR strength not less than 75 Kg/cm2 with dimensional tolerance +8 percent in cum 350.00 4197.50 1469125.00
cement mortar (1:6) in foundation.
Brick work withFly ash bricks 25 cm x 12 cmx8cm size having crushing
15 MR strength not less than 75 Kg/cm2 with dimensional tolerance +8 percent in cum 926.00 4235.50 3922073.00
cement mortar (1:6) in Super Structure
Providing and laying autoclaved aerated cement blocks masonry with
150mm/230mm/300 mm thick AAC blocks in super structure above plinth
level up to floor V level with RCC band at sill level and lintel level with
approved block laying polymer modified adhesive mortar all complete as per
direction of Engineer-in-Charge. (The payment of RCC band and
reinforcement shall be made for seperately).
a Ground Floor cum 463.00 4764.80 2206102.40
b First Floor cum 463.00 4954.30 2293840.90
TOTAL BRICK WORK 9891141.30 0.00
V 5.0 MARBLE & GRANITE WORK
Construction of Two stored building with terrace with provisions for EI & PH works of Biraja Women’s College at
Jajpur Town
Civil Work
AMOUNT NON SOR AMOUNT SOR
SL.NO. SOR/ MR DESCRIPTION OF WORK UNIT QTY. RATE (RS)
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded
and prepolished, machine cut for kitchen platforms, vanity counters, window
sills, facias and similar locations of required size, approved shade, colour
and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4
coarse sand), joints treated with white cement, mixed with matching pigment,
epoxy touch ups, including rubbing, curing, moulding and polishing to edges
to give high gloss finish etc. complete at all levels.
Granite of any colour and shade
Area of slab over 0.50 sqm sqm 50.00 2837.60 141880.00
Providing edge moulding to 18 mm thick marble stone counters, Vanities
18 SOR etc., including machine polishing to edge to give high gloss finish etc.
complete as per design approved by Engineer-in-Charge.
Granite work metre 147.00 295.00 43365.00
Extra for fixing marble /granite stone, over and above corresponding basic
19 SOR item, in facia and drops of width upto 150 mm with epoxy resin based metre 71.40 253.60 18107.04
adhesive, including cleaning etc. complete.
Extra for providing opening of required size & shape for wash basin/ kitchen
sink in kitchen platform, vanity counter and similar location in marble/
20 SOR Granite/ stone work, including necessary holes for pillar taps etc. including each 45.00 404.10 18184.50
moulding, rubbing and polishing of cut edges etc. complete.
Fixing tiles/Marbles in dados skirting and risers of step on 12mm thick
21 MR cement plaster (1:3) jointed with neat cement slurry mixed with pigment to
match the shades of the tiles etc. complete.
Vitrified Tile 600mmx600mm Coloured / Printed series
a Ground Floor sqm 200.00 952.20 190440.00
b First Floor sqm 200.00 967.20 193440.00
TOTAL MARBLE & GRANITE WORK 383880.00 221536.54
VI 6.0 WOOD AND P.V.C. WORK
ALUMINIUM WORK
79 SOR Providing and fixing glazing in aluminium door, window, ventilator shutters and
partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the
architectural drawings and the directions of engineer-in-charge . (Cost of aluminium
snap beading shall be paid in basic item):
With toughened glass panes of 4 mm thickness (weight not less than 20 kg/sqm) Sqm 15 843.42 12651.31
With toughened glass panes of 6 mm thickness (weight not less than 20 kg/sqm) Sqm 15 937.13 14057.01
With toughened glass panes of 8 mm thickness (weight not less than 20 kg/sqm) Sqm 79.2 1041.26 82467.79
80 SOR Providing and fixing double action hydraulic floor spring of approved brand and 0.00
manufacture conforming to IS : 6315, having brand logo embossed on the body /
plate with double spring mechanism and door weight upto 125 kg, for doors,
including cost of cutting floors, embedding in floors as required and making good the
same matching to the existing floor finishing and cover plates with brass pivot and single
piece M.S. sheet outer box with slide plate etc. complete as per the direction
of Engineer-in-charge.
With stainless steel cover plate minimum 1.25 mm thickness Each 26 2115.9 55013.40
81 SOR Providing and fixing 12 mm thick frameless toughened glass door shutter of Sqm 64.8 4398.91 285049.37
approved brand and manufacture, including providing and fixing top & bottom pivot &
double action hydraulic floor spring type fixing arrangement and making necessary holes
etc. for fixing required door fittings, all complete as per direction of Engineer-
incharge (Door handle, lock and stopper etc.to be paid separately).
SOR Providing and fixing aluminium work for doors, windows, ventilators and 0.00
partitions with extruded built up standard tubular sections/ appropriate Z
sections and other sections of approved make conforming to IS: 733 and IS:
1285, fixing with dash fasteners of required dia and size, including
necessary filling up the gaps at junctions, i.e. at top, bottom and sides with
required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be
smooth, rust free, straight, mitred and jointed mechanically wherever
required including cleat angle, Aluminium snap beading for glazing /
paneling, C.P. brass / stainless steel screws, all complete as per
architectural drawings and the directions of Engineer-in-charge. (Glazing,
paneling and dash fasteners to be paid for separately) :
SOR For fixed portion 0.00
SOR Anodised aluminium (anodised transparent or dyed to required kg 50 389.15 19457.50
shade according to IS: 1868, Minimum anodic coating of grade
SOR For shutters of doors, windows & ventilators including providing 0.00
and fixing hinges/ pivots and making provision for fixing of
fittings wherever required including the cost of EPDM rubber /
neoprene gasket required (Fittings shall be paid for separately)
SOR Anodised aluminium (anodised transparent or dyed to required kg 50 428.5 21425.00
shade according to IS: 1868, Minimum anodic coating of grade
SOR Providing and fixing anodised aluminium (anodised transparent or dyed to kg 50 324 16200.00
required shade according to IS: 1868. Minimum anodic coating of grade AC
15) sub frame work for windows and ventilators with extruded built up
standard tubular sections of approved make conforming to IS: 733 and IS:
1285, fixed with dash fastener of required dia and size (Dash fastener to be
paid for separately).
SOR Providing and fixing anodised aluminium grill/louver (anodised transparent or kg 50 424 21200.00
dyed to required shade according to IS: 1868 with minimum anodic coating
of grade AC 15) of approved design/pattern, with approved standard section
and fixed to the existing window frame with C.P. brass/ stainless steel screws
@ 200 mm centre to centre, including cutting the grill to proper opening size
for fixing and operation of handles and fixing approved anodised aluminium
standard section around the opening, all complete as per requirement and
direction of Engineer-in-charge. (Only weight of
grill to be measured for payment).
Construction of Two stored building with terrace with provisions for EI & PH works of Biraja Women’s College at
Jajpur Town
Civil Work
AMOUNT NON SOR AMOUNT SOR
SL.NO. SOR/ MR DESCRIPTION OF WORK UNIT QTY. RATE (RS)
Providing and fixing factory made single extruded WPC (Wood Polymer
Composite) solid door/window/Ceosetory window s & other
Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60
(Suspension Grade), calcium carbonate and natural fibers (wood powder/
rice husk/wheat husk) and non tox ic additives (maximum toxicity index of
12 for 100 gms) fabricated with miter jo ints after applying PVC solvent
cement and screwed with full body threaded star headed SS screws
having minimum f rame density of 750 kg/cum, screw withdrawal strength of
2200 N (Face) & 1100 N (Edge) , minimum compressive strength of 58
N/mm2, modulus of elast icity 900 N/mm2 and resistance to spread of flame
of Class A category with property of being termite/borer proof, water/moisture
proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash
fa steners of required dia and length complete as per direction of Engineer-
In - Charge . (M.S hold fast/lugs or SS dash fasteners shall be paid for
separate ly).
Note: For WPC solid door/window frames , minus 5mm tolerance in
dimensions i.e. depth and width of profile shall be acceptable . Variation in
profile dimensions on plus side shall be acceptab le but no extra payment on
this account shall be made
Supplying, fitting and fixing well dressed and well seasoned sal wood
choukaths framed and fixed including two coats coats of coaltaring to wall
and lintel side faces of choukaths including cost of coaltar and labour for
coaltaring and fixing required nos. of W.I. clamps to the choukaths with
approved qualities of screws including cost, conveyance, loading required
25 SOR metre 266.70 1286.90 343216.23
for the work etc. complete in all respect with cost, conveyance, royalties,
loading, unloading and taxes of all materials and cost of all labour, T&P,
sundries, scaffolding etc. required for the work complete in all respect as per
specification and direction of Engineer in Charge
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I)
non-decorative type, core of block board construction with frame of 1st class hard
26 SOR wood and well matched commercial 3 ply veneering with vertical grains or cross
bands and face veneers on both faces of shutters:
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum
27 SOR depth on all edges of flush door shutters (over all area of door shutter to be sqm 130.00 345.00 44850.00
measured).
Providing and fixing wooden moulded beading to door and window frames
28 SOR with iron screws, plugs and priming coat on unexposed surface etc. complete
2nd class teak wood
50 x 20 mm metre 208.60 169.66 35391.08
Providing and fixing FRP Door frames Size (65mmx90mm) at any locations
including doors, windows, cupboard, clerestory and other frames fixing in
position including cost of hinges, M.S. flat (30mmx6mm) hold fasts lugs or
dash fasteners of required dia and length as per drawing/specification,
at all floors and all heights.
Ground Floor Rmt 85.00 599.44 50952.40
First Floor Rmt 85.00 599.44 50952.40
Supplying fitting, fixing Fatory made single leaf rigid FRP
sandwich composite Door/Window shutter (allternatly GRP) of 32 mm
thick laminated with two GRP skins with wood grain finish
fabricated using UV-stabilised isopathalic Gelcoat and one layer of
450 gsm E-glass Chopped Strand Mat (CSM) mpregnate with
orthopthalic polysterskin. The thickness of the skins shall not be less
30 MR than 1.5 mm Expanded polystyone(EPS) structural foam panel of
29 mm thickness and a density of 20 kg/cu.mtr shall be used as core
material. Wooded reinforcement made of seaoned sal wood block of
cross section not less than 28mm x 32mm and also necessary sal
wood reinfocements for fitting the metal fittings such as tower bolt,
aldrop. hanles, etc. shall be provided. A structural adhesive
compatible with (EPS) foam shall be used for bending the core
Ground Floor Sqm 26.75 3354.74 89739.30
First Floor Sqm 26.75 3354.74 89739.30
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame
with 10 mm diameter bolts, nuts and wooden plugs and embedding in
31 SOR cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 each 420.00 112.50 47250.00
graded stone aggregate 20mm nominal size).
Glass Door
Supply,fabricating, fixing and finishing of single leaf with 12mm clear
toughened glass fixed with 304 grade SS top,bottom,lock pach. And
32 450mm H-handle fixed the center and door speed will be controled by floor
spring (Ozone/Dorma/Closma make). Rate including all
cost,conveyance,loading,un loading,materials,labours etc
Ground Floor Sqm 5.76 10923.26 62917.98
Construction of Two stored building with terrace with provisions for EI & PH works of Biraja Women’s College at
Jajpur Town
Civil Work
AMOUNT NON SOR AMOUNT SOR
SL.NO. SOR/ MR DESCRIPTION OF WORK UNIT QTY. RATE (RS)
Providing and Fixing pristine white uPVC doors & windows make: Fenesta.
Company must have own production facilities (extrusion & fabrication) &
control the entire cycle from Extrusion to Installation to Post Sales
Service.Providing and fixing of factory made uPVC Sliding window (White
Colour) complete, comprising uPVC multi-chambered frame having in-
built uPVC roller track on top and uPVC sash with wall thickness of 2.0mm (+-
0.2 mm) duly reinforced with G.I. section
1.6 mm (+-0.2 mm), profile shall be manufactured from
Tropicalized Blend with TiO2 and required additives. Profile must be
colorfast and conform to standard EN12608. The profile sections should
have multi hollow (min 2 to 3 chambers) chamber to include GI
reinforcement with 120 GSM zinc coated, fitted in continuous length, in
wind load requirement as per IS 875- Part III on sash/mullion. Supplier
should be submitting wind load calculation & validation complying with IS-
875-III before material supply. Minimum steel reinforcement thickness of
1.2mm to 2.5mm. UPVC Windows & Doors must be fabricated with
fusion welded corners & must conform to the strength
requirements based on wind load as per IS 875-Part III. All hardware
fitted should be Non-SS, except handles to be of zinc/Al. alloy casted with
powder coated. Glass should be of 6mm single clear Glass with weather
seal (EPDM/TPE). There would be Warranty of 10 years on Profile & one
year on hardware from the date of installation. UPVC windows & doors must
be installed by profile manufacturer only.Only manufacturer Waranty is
aceptable
After placing 6 mm Green Reflective Toughned glass in the sash, uPVC
glazing bead, interlock, EPDM gasket, brush shall be provided including
touch lock( above 1500 mm Multi Lock ) and rollers & proper drainage
system shall be provided. Window frame will be fixed to the wall with 100mm
long and 8mm dia. Fasteners and after fixing frame the gap between frame
& wall should be filled with silicon sealant (not more than 5 mm x 5 mm),
complete in all respect as per direction of Engineer-In-Charge.
Ground Floor Sqm 90.00 10030.00 902700.00
First Floor Sqm 90.00 10030.00 902700.00
Terrace Floor Sqm 7.20 10030.00 72216.00
Providing and fixing M.S grill of required patterns for
windows/verandahs etc. with M.S flats, square or round bars etc. including
applying a coat of approved steel primer and two or more coats of
synthetic enamel paint of approved make & shade, all complete as per
drawing & specification. (All steel sections contractor's own supply).
Ground Floor Kg. 200.00 81.10 16220.28
First Floor Kg. 200.00 81.10 16220.28
Terrace Floor Kg. 50.00 81.10 4055.07
Providing & Applying priming one coat with Cement primer of approved
brand and manufacture on plaster surface as per the instruction of
Engineer-In-Charge at all elevations including all
material & labour complete.
Ground Floor Sqm 4200.00 68.59 288092.28
First Floor Sqm 4200.00 70.29 295228.92
Terrace Floor Sqm 516.30 73.83 38119.77
Providing and applying to outside walls with two or more coats of Anti-Fungal
Weather coat water proofing paint including scaffolding and
cleaning the surface before application of approved colour and
manufacture as per specification, instruction of Engineer-In-charge at all
elevations including all material labour complete.
Ground Floor Sqm 1200.00 83.44 100125.36
First Floor Sqm 1200.00 86.48 103778.64
Terrace Floor Sqm 300.00 93.04 27912.90
Providing and applying white cement based putty of average thickness
1 mm of approved brand and manufacturer, over the plastered wall
36 surfaces to prepare the surface even and smooth as per the instruction of
Engineer-In-Charge at all elevations including all material & labour
complete.
Ground Floor Sqm 4200.00 77.23 324370.20
First Floor Sqm 4200.00 78.78 330862.56
Terrace Floor Sqm 516.30 81.99 42329.58
Preparing surface and painting at all height with two or more coats of interior
Plastic Emulsion "Royale Shyne" of Asian Paints or equivalent of
approved shade as per the instructions of the manufacturers; giving
uniform shade etc in all heights of walls etc. including interior wall
primer & providing scaffolding, cleaning, curing and supply of all
materials and labour complete as per drawing, design and direction of
Architect/Engineer-In- Charge.
Ground Floor Sqm 4200.00 90.15 378638.40
First Floor Sqm 4200.00 91.92 386072.40
Terrace Floor Sqm 516.30 95.75 49433.25
Providing & Applying priming coat with ready mixed pink or gray primer of
approved brand and manufacture on wood /Ply work (hard and soft
wood)as per the instruction of Engineer-In-Charge at all elevations including
all material & labour complete.
Ground Floor Sqm 100.00 66.72 0.00
First Floor Sqm 100.00 69.08 0.00
Terrace Floor Sqm 100.00 72.62 0.00
Providing & Painting with synthetic enamel paint of approved brand
and manufacture to give an even shade as per the instruction of
Engineer-In-Charge at all floors and all heights
including all material & labour complete.
Construction of Two stored building with terrace with provisions for EI & PH works of Biraja Women’s College at
Jajpur Town
Civil Work
AMOUNT NON SOR AMOUNT SOR
SL.NO. SOR/ MR DESCRIPTION OF WORK UNIT QTY. RATE (RS)
Ground Floor Sqm 180.00 156.94 28249.20
First Floor Sqm 180.00 160.69 28924.63
Terrace Floor Sqm 2.75 168.53 463.45
Supplying, fitting and fixing of Stainless steel of 304 grade in hand ralling
using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm X
32mm X 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size
40 32mm X 32mm X 2mm in 3 rows in stair case as per approved design
and specification, buffing, polishing etc with cost, conveyance, taxes, all
materials, labour, T&P etc. required for the complete in all respect.
Ground Floor Kg 500.00 318.13 159064.00
First Floor Kg 500.00 318.13 159064.00
Providing and laying grading conc. 25 mm (avg. thickness) cement
concrete of required slope of mix 1:2:2 (1cement:2sand:2 graded stone
aggregate of 10 mm nominal size) mixed with approved water proof
compound as per manufacturer's specification on top of slab including
cement slurry, all complete, including the cost of water proofing admixture,
which should be approved by the Engineer-In-Charge prior to material
procurement by the contractor.
Terrace Floor Sqm 2750.00 457.34 1257697.10
Door Hardwers
32 MR SS Tower Bolt 12'' each 70.00 679.00 47530.00
dormakaba BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x
33 MR 3mm, in SS 304 and in SSS finish. Suitable for door weights upto 120kgs. each 140.00 312.00 43680.00
Template Drilled
dormakabakaba ML 550S Digital Mortise lock in standard design accessible
by Fingerprint (100 nos.), RFID (100 Nos.), PIN (4 Nos.), BLE (10 mobiles),
34 MR Mechanical Keys (3 nos.). Emergency Power: external 9VDC alkaline each 7.00 41861.00 293027.00
battery. Mortise lock in Black with Bright Chrome Rim finish. Remote Control
(optional)
dormakaba floor stop half dome with 45mm dia with fixing accessories, in
35 MR each 35.00 232.00 8120.00
satin Chrome
Providing and fixing aluminium die cast body tubular type universal hydraulic
door closer (having brand logo with ISI, IS : 3564, embossed on the body,
36 SOR each 35.00 832.30 29130.50
door weight upto 35 kg and door width upto 700 mm), with necessary
accessories and screws etc. complete.
Providing & Fixing decorative high pressure laminated sheet of plain / wood
grain in gloss / matt/ suede finish with high density protective surface layer
37 SOR and reverse side of adhesive bonding quality conforming to IS : 2046 Type
S, including cost of adhesive of approved quality.
1.0 mm thick sqm 129.36 693.36 89693.05 89693.05
Providing and fixing factory made uPVC white colour fixed glazed
windows/ventilators comprising of uPVC multi-chambered frame and mullion
(where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm
thick galvanized mild steel section made from roll forming process of
required length (shape & size according to uPVC profile), uPVC extruded
glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8
mm size for fixing frame to finished wall, plastic packers, plastic caps and
necessary stainless steel screws etc. Profile of frame shall be mitred cut and
fusion welded at all corners, mullion (if required) shall be also fusion welded
DSR including drilling of holes for fixing hardware's and drainage of water etc.
Analysis After fixing frame the gap between frame and adjacent finished wall shall be
filled with weather proof silicon sealant over backer rod of required size and
of approved quality, all complete as per approved drawing & direction of
Engineer-in-Charge. (Single / double glass panes and silicon sealant shall
be paid separately).
Note: For uPVC frame, sash and mullion extruded profiles minus 5%
tolerance in dimension i.e. in depth & width of profile shall be acceptable.
Variation in profile dimension in higher side shall be accepted but no extra
payment on this account shall be made.
Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion
47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing sqm 13.86 6231.50 86368.59
bead of appropriate dimension. (Area upto 0.75 sqm.)
Providing and fixing factory made uPVC white colour sliding glazed window
upto 1.50 m in height dimension comprising of uPVC multi-chambered frame
with in-built roller track and sash extruded profiles duly reinforced with 1.60 ±
0.2 mm thick galvanized mild steel section made from roll forming process of
required length (shape & size according to uPVC profile), appropriate
dimension of uPVC extruded glazing beads and uPVC extruded interlocks,
EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with
hook, zinc alloy body with single nylon rollers (weight bearing capacity to be
40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and
necessary stainless steel screws etc. Profile of frame & sash shall be mitred
DSR cut and fusion welded at all corners, including drilling of holes for fixing
Analysis hardware's and drainage of water etc. After fixing frame the gap between
frame and adjacent finished wall shall be filled with weather proof silicon
sealent over backer rod of required size and of approved quality, all
complete as per approved drawing & direction of Engineer-in-Charge.
(Single / double glass panes, wire mesh and silicon sealent shall be paid
separately)
Note: For uPVC frame and sash extruded profiles minus 5% tolerance in
dimension i.e. in depth & width of profile shall be acceptable. Variation in
profile dimension in higher side shall be accepted but no extra payment on
this account shall be made.
Three track three panels sliding window with fly proof SS wire mesh (Two
nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x
44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and sqm 80.00 8621.36 689708.64
single glazing bead of appropriate dimension (Area of window upto 1.75
Construction of Two stored building with terrace with provisions for EI & PH works of Biraja Women’s College at
Jajpur Town
Civil Work
AMOUNT NON SOR AMOUNT SOR
SL.NO. SOR/ MR DESCRIPTION OF WORK UNIT QTY. RATE (RS)
Structure glaze Series with Door and Window
Providing and fixing flat face structure glaze aluminum section as per JIS
A4706 AND JIS A4702 of 60x100/200mm, door profile size top and bottom
40x100mm and window section size should be 40x 80mm, extruded
aluminum sections should be made from Grade 6063-T5 , & Anodized with
Texguard coating .All profiles should be Non insulated Profiles. All other
major Accessories should be manufactured by the same manufacturer.
4.1 Hardware should be as per approved makes and same manufacturer of
DSR the system.
Analysis All materials which are used in should be corrosion-resistant so that the
good functioning in different environments and that there are no negative
influences either on the aluminum or on the surface treatment.
The system should allow the application of glazing or panels with thickness
up to 12 mm .The external perimeter of aluminum sections should be
Anodized with Texguard coating Marion face 60mm, Wind pressure:- 1600
Pa, Water tightness:- 500 Pa, Air tightness A-4. Both Frame and Casement
should be made in Thailand. Approved make: Tostem or equivalent
TOTAL WOOD AND P.V.C. WORK 8678972.11 779603.86
VII 7.0 STEEL WORK
Structural steel work in single section, fixed with or without connecting
#REF! SOR plate,including cutting, hoisting, fixing in position and applying a priming coat kg 100.00 103.20 10320.00
of approved steel primer all complete.
Structural steel work in built up sections/framed work including cutting,
37 SOR hoisting, fixing in position applying a priming coat of approved steel primer kg 600.00 103.20 61920.00
all complete.
Steel work in built up tubular/built up sections/ framed work, (round, square
or rectangular hollow tubes etc.) trusses etc., including chequered plates,
#REF! MR cutting, hoisting, fixing in position and applying a priming coat of approved
steel primer, including welding and bolted with special shaped washers etc.
complete.
Electric resistance or induction butt welded tubes kg 672.32 109.30 73484.03
Providing and fixing roofing consist of 0.9 mm thick galvanized steel deck sheet
confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh
3mm laid at 100x100 mm grid including edge trim covered with concrete. This metal
#REF! MR sqm 50.00 1450.00 72500.00
deck will be supported on structural steel beam with shear studs. (Structural steel
like Beam, column, joists etc. & concrete of different grade as per design will be
paid separately).
Providing and fixing 10 mm plain toughened glass SS railing with wooden
top handrail 40 mm X 40 mm, of CP2 sagwan wood including PU polish in
#REF! MR mat finish and bottom 80 mm X 40 mmaluminium profile of wooden color rmt 136.85 13956.40 1909933.34
powder coating all complete, under the supervision of Engineer-in-Charge.
Providing and fixing stainless steel ( Grade 304) railing made of
Hollow tubes, channels, plates etc., including welding, grinding, buffing,
polishing and making curvature (wherever required) and fitting the
47 SOR same with necessary stainless steel nuts and bolts complete, i/c fixing the Kg 1045.93 370.08 387075.92
railing with necessary accessories & stainless steel dash fasteners ,
stainless steel bolts etc., of required size, on the top of the floor or the
side of waist slab with suitable arrangement as per approval of Engineer-
incharge, (for payment purpose only weight of stainless steel members
DSR Providing & fixing fly proof wire gauze to windows, clerestory windows &
#REF! analysis doors with M.S. Flat 15x3 mm and nuts & bolts complete.
Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm
aperture on both sides
Supplying and fixing of Fundermax brand or equivalent Clades of standard
dimension of 1300mm x 3050mm of thickness 6mm.(WOOD FINISH)
for fixing used Al. sub structure is made up of Aluminum box sections
of 38x38x2mm the. and 38x75x2mm the. The section size 75x38 x2mm
will be using on the vertical joint of the two panels. As per the
standard procedures in riveting system. Spacing of two verticals should
always be maintained at 600mm. MS Brackets are of two types, Wind load
brackets and Dead load brackets of size 85x50x5mm the. and to be placed
in 1500 mm intervals in vertical. Wind load brackets will have vertical slot
and Dead load brackets will have horizontal slots. Thermal separators to
be placed between MS brackets and concrete structure. Bimetallic
separators to be placed between Al. sub structure and MS brackets.
Brackets fixing with nylon fasteners or self tapping bolts. Aluminum grid
frame fixing in betweenoth Frame and Casement should be made in
Thailand. Approved make: Tostem or equivalent
ly. Minimum steel reinforcement thickness of 1.2mm to 2.5mm. UPVC
Windows & Doors must be fabricated with fusion welded corners &
must conform to the strength requirements based on wind load as
per IS 875-Part III. All hardware fitted should be Non-SS, except handles
to be of zinc/Al. alloy casted with powder coated. Glass should be of 6mm
single clear Glass with weather seal (EPDM/TPE). There would be
Warranty of 10 years on Profile & one year on hardware from the date of
installation. UPVC windows & doors must be installed by profile
manufacturer only.Only manufacture
Ground Floor Sqm 80.00 6413.30 513064.00
First Floor Sqm 80.00 6413.30 513064.00
UNISTONE GRC CUSTOMIZED SCREENS.
Construction of Two stored building with terrace with provisions for EI & PH works of Biraja Women’s College at
Jajpur Town
Civil Work
AMOUNT NON SOR AMOUNT SOR
SL.NO. SOR/ MR DESCRIPTION OF WORK UNIT QTY. RATE (RS)
Providing and fixing of Glass Reinforced Concrete (GRC) screens in
approved size, pattern, design, shadeness of 50mm on frame and design
element in 30mm thick have weight approximately between 3.5-4 kg per
sq. ft and colour of M/S unistone make or equivalent. The above weight
and thickness is condering dimensions of screens up to 2133 mm in
MR height and 1219 mm in width and having at least 50% void space. The
screens should be made from 53 grade. The material of screens should
be 'Dry fixing' to be done with M.S Galvanised Clamps fixture and
fasteners of Hilti/Fischer all complete with respect as per the
instruction of Engineer-in-charge.
Ground Floor Sqm 50.00 6926.60 346330.00
First Floor Sqm 50.00 6926.60 346330.00
Providing and fixing factory made 18 mm thick single extruded WPC (Wood
Polymer Composite) solid plain white colour board Jali, CNC (Computer
numeric control) routed of approved design by Engineer-in -charge which are
machine cut for duct/shaft covering, partitions and facades comprising of
virgin polymer of K value 58-60 (Suspension Grade), calcium corbonate and
natural fibers (wood powder/ rice husk/wheat husk) and non toxic
additives(maximum toxicity index of 12 for 100 gms) having minimum density
of 650 kg/cum and screw withdrawal strength of 1800 N (Face) minimum
compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and
resistance to spread of flame of Class A category with properties of being
MR termite/borer proof, water/moisture proof and fire retardant and fixing on M.S sqm 60.00 2780.00 166800.00
(mild steel) frame made of 25 x 25 x 1.5 mm square hollow box section
including applying a priming coat of approved steel primer, placed at grid
made at 1.0 x 1.0 m or as per requirement at site with necessary stainless
steel fasteners and SS screws etc., all complete as per direction of Engineer-
In- Charge.
(Note: M.S (mild steel) framework with priming coat and necessary SS
fasteners and SS screws shall be paid
separately.
Providing & Fixing decorative high pressure laminated sheet of plain / wood
grain in gloss / matt/ suede finish with high density protective surface layer
MR and reverse side of adhesive bonding quality conforming to IS : 2046 Type sqm 60.00 4590.00 275400.00
S, including cost of adhesive of approved quality
MR 1.5mm thick
TOTAL STEEL WORK 4663244.13 `
VIII 11.0 FLOORING WORK
Providing and fixing machine cut, mirror/ eggshell polished , Marble stone
work for wall lining (veneer work) including dado, skirting, risers of steps etc.,
in required design and pattern (if required with marble stone slab pieces of
different shapes, sizes & texture but of even thickness) on 12 mm (average)
thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with
#REF! MR
white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry
admixed with pigment of matching shade, including rubbing, curing, polishing
etc. all complete as per Architectural drawings, and as directed by the
Engineer-in-Charge.
18 mm thick Italian Marble stone slab,Perlato, Rosso erona, Fire Red or
Dark Emperadore etc.
Providing and laying Polished Granite stone flooring in required design
and patterns, in linear as well as curvilinear portions of the building all
complete as per the architectural drawings with 18 mm thick stone
slab over 20 mm (average) thick base of cement mortar 1:4 (1
#REF! SOR cement : 4 coarse sand) laid and jointed with cement slurry and
pointing with white cement slurry admixed with pigment of matching
shade including rubbing , curing and polishing etc. all complete as
specified and as directed by the Engineer-in-Charge.
Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat
Eye or equivalent.
a Ground Floor sqm 200.00 2575.40 515080.00
b First Floor sqm 200.00 3019.70 603940.00
Supplying, fitting ,fixing vitrified tile of ( Printed ) in floors of size
(600mmx600mm/800x800/1200x1200)of approved make conferming to
IS:13755 laid on 20mm thick cement mortar (1:4) (1 cement:4 sand) and
#REF! SOR
filling joints with white cement of approved quality including cost of all
materials,labour T&P etc required for the work all complete as per the
direction of Engineer-in-charge.
a Ground Floor sqm 2650.00 931.50 2468475.00
b First Floor sqm 2650.00 941.50 2494975.00
Providing and latying vitrified tiles in skirting
(600x600/800x800mm/1200x1200)) (thickness to be specified by the
manufacturer ) 1st quality of approved make, colours, & shades laid on
#REF! SOR 12mm thick cement mortar 1:3 (1 cement :3 coarse sand) including pointing
the joints with white cement and matching pigments etc. complete as per
direction of Engineer-in-charge at all heights and floors
a Ground Floor sqm 123.00 1232.95 151652.85
b First Floor sqm 123.00 1250.01 153751.23
TOTAL FLOORING WORK 413650.00 6387874.08
IX 12.0 ROOFING WORK
Construction of Two stored building with terrace with provisions for EI & PH works of Biraja Women’s College at
Jajpur Town
Civil Work
AMOUNT NON SOR AMOUNT SOR
SL.NO. SOR/ MR DESCRIPTION OF WORK UNIT QTY. RATE (RS)
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 stone aggregate 10 mm and down gauge), including finishing with
#REF! SOR
cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
In 75x75 mm deep chase metre 80.00 100.40 0.00 8032.00
Providing and fixing false ceiling at all height including providing and fixing of
frame work made of special sections, power pressed from M.S. sheets and
galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS :
277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with
flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed
to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia
bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of
required length with nuts & bolts of required size and other end of angle
hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the
spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm
thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips
of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction
perpendicular to G.I. intermediate channel with connecting clips made out of
2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing
#REF! SOR perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and
30 mm long, the perimeter of ceiling fixed to wall/partition with the help of
rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm
interval, including fixing of gypsum board to ceiling section and perimeter
channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c,
including jointing and finishing to a flush finish of tapered and square edges
of the board with recommended jointing compound , jointing tapes , finishing
with jointing compound in 3 layers covering upto 150 mm on both sides of
joint and two coats of primer suitable for board, all as per manufacturer's
specification and also including the cost of making openings for light fittings,
grills, diffusers, cutouts made with frame of perimeter channels suitably fixed,
all complete as per drawings, specification and direction of the Engineer in
Charge but excluding the cost of painting with :
12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG) board
conforming to IS: 2095- (Part 3) : 1996 (Board with BIS certification marks) sqm 551.57 1037.57 572287.30
Providing and fixing tiled false ceiling of specified materials of size 595x595
mm in true horizontal level, suspended on inter locking metal grid of hot
dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side
inclusive) consisting of main "T" runner with suitably spaced joints to get
required length and of size 24x38 mm made from 0.30 mm thick (minimum)
sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm
made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between
main "T" at 600 mm center to center to form a grid of 1200x600 mm and
secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm
thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel
#REF! SOR to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying
false ceiling tiles of approved texture in the grid including, required
cutting/making, opening for services like diffusers, grills, light fittings,
fixtures, smoke detectors etc. Main "T" runners to be suspended from
including fixing perimeter channels 0.5 mm thick 27 mm high having flanges
of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with
the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @
230 mm interval, including fixing of gypsum board to ceiling section and
perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230
mm c/c, including jointing and finishing to a flush finish of tapered and
GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of
size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having
galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area
with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5,
electro statically polyester powder coated of thickness 60 microns
(minimum), including factory painted after bending and perforation, and
backed with a black Glass fiber acoustical fleece.
CEILLING - GRID SYSTEM SUBTEX NUBBY TILES GLASS
FIBRE (ANUTONE ) :-
Construction of Two stored building with terrace with provisions for EI & PH works of Biraja Women’s College at
Jajpur Town
Civil Work
AMOUNT NON SOR AMOUNT SOR
SL.NO. SOR/ MR DESCRIPTION OF WORK UNIT QTY. RATE (RS)
Supply and Installation of false ceiling of Anutone Subtex Nubby steppe
edge Glass fiber core ceiling tile of size 595 x 595 x 15 mm having rear side
full encapsulation with density 120 Kgs/ m3, weight 1.8 kg/m2 which is
suspended by using 0.3 mm thick and 15 mm wide pre coated metal T15
grid system. The technical parameters are as follows :Core - Glass fiber,
Fire – Class 1 & P , Acoustics – NRC 0.90,Thermal 0.066 W / mK ,Climate
(OC RH) – 40, 95,Termite resistance ,Light reflectance – 85 %,Green (RC
– 35, Hygiene (VoC, Clean room) – Low, Class 3 Strength, Load capacity
(Kg) - Anti sag. The T15 Grid system of 600 x 600 mm module shall include
wall angle(WA 15 W 30) with unequal flanges of size 15 & 30 mm wide,
length 3000 mm, 0.43 mm thick fixed along the perimeter of wall with the
help of nylon sleeves and suitable fasteners at 300 mm centers. Then
suspend the Main T 15(MT 15 W 32 H) having flange width 15 mm, height
32 mm and length 3600 mm from the soffit with help of soffit cleat and wire SQM
rod along with leveling spring clip at 1200 mm c/c. Cross T 15 (CT15 W
12) with flange width 15 mm, height 26 mm and length 1200 mm is then
interlocked into the pre-cut slots in the Main T15 at 600 mm centers in the
direction perpendicular to the Main T 15. Finally Cross T 15 (CT 15W 26
H) having flange width 15 mm, height 26 mm and length 600 mm are then
interlocked into the pre-cut slots in the 1200 mm Cross T15 at 1200 mm
centers and in direction parallel to the Main T 15. Subtex Nubby steppe
edge of size 595 x 595 x 15 mm thick shall be placed into the grid size of 600
x 600 mm. Ensure arrow marks behind subtex panels are oriented in one
direction to achieve uniform shade. 3 Year Warrenty & Test certificate
will be submitted after procurement of materials. ( Basic rate of 15 mm
Subtex Nubby square Edge (595 X 595 x 15 mm of size) tile-
Rs.1785.00/sqm.
Ground floor Nos 50.00 35848.40 1792420.00
First floor Nos 50.00 35848.40 1792420.00
48 Gyp Board Ceilling :-
Providing and fixing False ceiling as per Saint Gobain
Specifications made of standard G.I. Sections and 12mm thick gyp
board sheets inclusive of all hangers, edge members and other clips
complete, with sheets fixed with proper Philip fastner by power drills and
joints duly finished ensuring level in line, complete with putty, primer and
MR SQM 50.00 1062.00 53100.00
painting of approved make and colour . Cost includes cutouts for
electrical fittings, materials, labour, T&P etc complete as per direction
of the Engineer-in- charge. (Basic Rate of Gypsum Board 12mm thk.
sheet).
TOTAL ROOFING WORK 3637940.00 682428.29
X 10.0 FINISHING WORK
19 SOR 12mm thick cement plaster (1:6) on brick work. sqm 3748.00 139.80 523970.40
20 SOR 16mm thick cement plaster (1:6) over brick or stone masonry. sqm 3642.35 199.90 728105.77
6 mm thick cement plaster (1:4) to R CC surfaces finished smooth including
21 SOR sqm 8118.30 157.00 1274573.10
closed deep chiping and slury treatment. Per 1 Sqm
Providing and applying plaster of paris putty of 2 mm thickness over
22 SOR sqm 2532.04 244.80 619845.80
plastered surface to prepare the surface even and smooth complete.
Finishing walls with textured exterior paint of required shade :New work (Two
or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of
23 SOR exterior primer applied @ 2.20kg/10 sqm sqm 1264.83 204.70 258910.70
Painting 2 coats with any enamel paint on new work over primer including
24 SOR sqm 400.00 136.60 54640.00
cost of paint & primer , labour.
Painting two coats to the wall surface by using 100% premium Acrylic
emulsion paint to interior wall surface over a coat of primer with water bond
cement primer after preparing the surface smooth by applying putty punning
25 SOR sqm 1418.21 78.08 110735.18
with Synthetic Acrylic wall putty including finishing the surface smooth by
sand papering in all heights etc. complete in all respect.
Applying priming coats with primer of approved brand and manufacture,
having low VOC (Volatile Organic Compound ) content. With ready mixed
26 MR sqm 1418.21 69.59 98689.01
pink or grey primer on wood work (hard and soft wood) having VOC content
less than 50 grams/ litre
TOTAL FINISHING WORK 98689.01 3570780.95
XIII 11.0 WATER PROOFING WORK
Providing and laying water proofing treatment to vertical and horizontal
surfaces of depressed portions of W.C., kitchen and the like consisting of:
(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water
proofing compound conforming to IS 2645 in recommended proportions
including rounding off junction of vertical and horizontal surface.
(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand)
mixed with water proofing compound in recommended proportion including
rounding off junction of vertical and horizontal surface.
#REF! SOR sqm 42.53 702.50 29873.81
(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg.
per sqm of area.
(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC
sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7
kg/sqm).
Construction of Two stored building with terrace with provisions for EI & PH works of Biraja Women’s College at
Jajpur Town
Civil Work
AMOUNT NON SOR AMOUNT SOR
SL.NO. SOR/ MR DESCRIPTION OF WORK UNIT QTY. RATE (RS)
Providing and laying integral cement based water proofing treatment
including preparation of surface as required for treatment of roofs, balconies,
terraces etc consisting of following operations:
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement
admixed with water proofing compound conforming to IS. 2645 and approved
by Engineer-in-charge over the RCC slab including adjoining walls upto 300
mm height including cleaning the surface before treatment.With average
thickness of 120 mm and minimum thickness at khurra as 65 mm.
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115
mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed
with water proofing compound conforming to IS : 2645 and approved by
Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1
cement :5 coarse sand ) admixed with water proofing compound conforming
to IS : 2645 and approved by Engineer-in-charge to required slope and
#REF! SOR treating similarly the adjoining walls upto 300 mm height including rounding sqm 3000.00 1423.10 4269300.00
of junctions of walls and slabs.
(c) After two days of proper curing applying a second coat of cement slurry
using 2.75 kg/ sqm of cement admixed with water proofing compound
conforming to IS : 2645 and approved by Engineerin- charge.
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4
(1 cement :4 coarse sand) admixed with water proofing compound
conforming to IS : 2645 and approved by Engineerin- charge including laying
glass fibre cloth of approved quality in top layer of plaster and finally
finishing the surface with trowel with neat cement slurry and making pattern
of 300x300 mm square 3 mm deep.
(e) The whole terrace so finished shall be flooded with water for a minimum
period of two weeks for curing and for final test.“All
above operations to be done in order and as directed and specified by the
Engineer-in-Charge :
TOTAL WATER PROOFING WORK 0.00 4299173.81
12 ROAD WORK
Construction of granular sub-base by providing close graded Material grade
VI, spreading in uniform layers with motor grader on prepared
1 MR surface,mixing by place in method rotavator at OMC, and compacting with Cum 75 1460.95 109570.97
vibratory power roller to achieve the desired density, complete as per clause
Providing and laying 80mm thick factory made cement concrete interlocking
paver block of M-30 grade made by block making machine with strong
vibratory compaction, of approved size, design & shape, laid in required
2 MR Sqm 850 792.71 673805.37
colour and pattern over and including 20 mm thick compacted bed of coarse
sand, filling the joints with fine sand etc. all complete as per the direction of
Engineer-in-charge.
Construction of cement concrete kerb with top and bottom width 115 and 165
mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation
3 MR 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb Rmt 182 273.26 49734.12
stone laid with kerb laying machine, foundation concrete laid manually, all
complete as per clause 408
Painting two coats after filling the surface with synthetic enamel paint in all
shades on new plastered concrete surfaces as per section 800 of MoRTH
4 MR Sqm 100 74.45 7444.62
specifications for Road & Bridge works (5th revision) and instruction of
Engineer in charge
Providing and lying Plain Cement Concrete of proportion (1:3:6) in
foundation & floor using 40 mm & down grade black hard crusher broken
granite stone metal, washed and screened sharp sand of approved quality
from approved quarry including hoisting, lowering, laying the concrete,
5 MR ramming, watering and curing etc. complete to required thickness including Cum 15 4842.84 72642.57
cost of all materials, conveyance, loading, unloading, royalties, cost of
labours, T&P, hire & running charges of concrete mixer, etc. all complete as
per the direction of the Engineer -in -charge.
Supplying and Filling clean course sand in foundation and plinth, free from
deliterious materials, earth, earthclods, roots and boulders etc watered and
well compacted,including cost of all materials, labour , and T&P etc complete
6 MR below leveling course of open foundations/approach slab etc complete as Cum 50 438.08 21903.75
per technical specification for Road & Bridge works (MORTH 5th revision) &
as directed by Engineer in charge.
TOTAL Road WORK
FURNITURE WORK
XXIII 23.0
Supplying, Fitting & Fixing of DUALDESK with proper line & level including
1 MR all fittings & fixture as per direction by Engineer-in-charge(approved make by Nos 500.00 14160.00 7080000.00
Godrej,Durin, Woodart,or Eqivalent)
Supplying, Fitting & Fixing of TABLE with proper line & level including all
2 MR fittings & fixture as per direction by Engineer-in-charge(approved make by Nos 30.00 17700.00 531000.00
Godrej,Durin,Woodart,or Eqivalent)
Supplying, Fitting & Fixing of CHAIR with proper line & level including all
3 MR fittings & fixture as per direction by Engineer-in-charge(approved make by Nos 150.00 4720.00 708000.00
Godrej,Durin,Woodart,or Eqivalent)
Supplying, Fitting & Fixing of CONFERENCE TABLE with proper line & level
4 MR including all fittings & fixture as per direction by Engineer-in- Nos 1.00 82600.00 82600.00
charge(approved make by Godrej,Durin,Woodart,or Eqivalent)
Supplying, Fitting & Fixing of LIBRARY TABLE with proper line & level
5 MR including all fittings & fixture as per direction by Engineer-in- Nos 1.00 82600.00 82600.00
charge(approved make by Godrej,Durin,Woodart,or Eqivalent)
Supplying, Fitting & Fixing of LIBRARY CABINET with proper line & level
5 MR including all fittings & fixture as per direction by Engineer-in- Nos 30.00 11800.00 354000.00
charge(approved make by Godrej,Durin,Woodart,or Eqivalent)
Total Rs. 88,38,200.00
XXIV 13 LANDSCAPING.
Construction of Two stored building with terrace with provisions for EI & PH works of Biraja Women’s College at
Jajpur Town
Civil Work
AMOUNT NON SOR AMOUNT SOR
SL.NO. SOR/ MR DESCRIPTION OF WORK UNIT QTY. RATE (RS)
Surface dressing of the ground including removing Vegetation and making
up undulations and in-equalities not exceeding 15 cms in depth/ height
1 MR Sqm 422.00 177.00 74694.00
including disposal of rubbish lead upto 50m (at least 5m away from the
dressed area). (Provisional)
Supplying and stacking & speareding of good earth at site including royalty
2 MR and carrage up to 5 KM (earth measured in stacks will be reduced by 20% Cum 221.00 590.00 130390.00
for payment) 300mm th. (Provisional)
Supplying and stacking sludge at site including royalty and carrage up to 5
3 MR KM (sludge measured in stacks will be reduced by 8% for Cum 175.00 944.00 165200.00
payment). (Provisional)
Uprooting weeds from the trenched area after 10 to 15 days of its flooding
with water including disposal of uprooted vegetation, breaking clods and fine
4 MR Sqm 175.00 118.00 20650.00
dressing the ground including all materials and labour complete as per
direction of Engineer-In-Charge. (Provisional)
Provision of soft surfaces such as grass lawns in between the open paces.
5 MR Sqm 425.00 295.00 125375.00
(Provisional)
Provision of plantation all around the campus with suitable tree guard where
required. (Provisional)
MR -Fast growing ornamental species Nos 40.00 708.00 28320.00
(i.e. Kadamba (anthocephalus cadamba), Krusnachuda (Delonixregia),
Radhachuda (Peltoferrum ferrugenum)
7 MR Slow growing ornamental species. (Provision) Nos 40.00 708.00 28320.00
(i.e. Asoka (sarca asoka), Baula (mimussops elengii), Bottle brush
(callistemin lanceolatum), Neem (azadirchta indica), Karanj (pangamea
pinnata), Debdaru (polyalthia longifolia), Aonla (embelica officinalis), Sunari
(cassia fistula) & Kanchan (bauhinia variegate)
8 MR Shrub species (i-Local species).(Provision) Nos 40.00 531.00 21240.00
(i.e. Mandar (hibiscus rosasinesis), Tagar (tabarnae montana coronaria) ,
Kaniar (thevetia spp), Karabira (nerium oleander)
9 MR Creepers/ Climbers/ Ground covers.(Provision) Sqm 60.00 590.00 35400.00
(i.e. Jui(jasminum offcinale), Jai (jasminum pubescence), Madhumalati
(quuisquilis indica)
Providing, lifting, hoisting and laying Reinforced cement concrete of M-250
grade as per approved designs and drawings having a minimum
compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at
28 days after mixing and test conducted in accordance with I.S. 516 using
12 mm. to 20 mm. size black hard crushed broken granite stone chips and
screened and washed sharp sand for mortar of approved quality from
approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25
% ) to be mixed in concrete mixture with Portland slag cement (PSC)
including hoisting, lowering, laying and compaction concrete by using
vibrators, watering and curing for 28 days, centering and shuttering then
10 MR Cum 3.00 6390.08 19170.23
after dismantling and removing debris from the work site and finishing the
exposed surface smooth providing grooves or beads wherever necessary
including cost, conveyance, loading, unloading, royalties and taxes of all
materials and cost of all labours, sundries, T & P required of the work etc.
complete in apto 300 mm height including rounding of junctions of walls and
slabs.
(c) After two days of proper curing applying a second coat of cement slurry
using 2.75 kg/ sqm of cement admixed with water proofing compound
conforming to IS : 2645 and approved by Engineerin- charge.
Providing & Painting with synthetic enamel paint of approved brand and
manufacture to give an even shade as per the instruction of Engineer-In-
11 MR Sqm 5.00 156.94 784.70
Charge at all floors and all heights including all material &
labour complete. (Provision)
Supplying fitting fixing of UPVC (SCH-80) pipe including all cost.
(Provision)
MR i) 25 mm dia Mtr 30.00 94.28 2828.46
MR ii) 40 mm dia Mtr 30.00 153.16 4594.92
13 MR Fitting Fixing of PVC Ball Valve. (Provision)
MR i) 25 mm dia Each 10.00 440.75 4407.54
MR i) 40 mm dia Each 10.00 1159.44 11594.44
Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of
the following nominal bore with supply of all jointing materials complete as
per specification and direction of the Engineer in charge. (Provision)
a) MR 15mm dia CP Bib cock (Plaza/zigma/Amber/Delux Make) (Provision) Each 6.00 590.00 3540.00
Total Rs. 6,76,509.29
Construction of Two stored building with terrace with provisions for EI & PH works of Biraja
Women’s College at Jajpur Town
SUMMARYOF PLUMBING WORK
NON-SOR SOR AMOUNT TOTAL
SL.NO. DESCRIPTION OF WORK
AMOUNT (Rs.) (Rs.) AMOUNT (RS)
1 INTERNAL PH WORKS 3360794.46 0.00 3360794.46
2 EXTERNAL WATER SUPPLY 3032708.56 0.00 3032708.56
3 EXTENAL SEWAGE 1299351.10 0.00 1299351.10
4 SEPTIC TANK & SOCK PIT. 2072052.64 0.00 2072052.64
5 WATER TREATMENT PLANT - 2 CUM/HR 955800.00 0.00 955800.00
6 PUMP ROOM. 882075.28 0.00 882075.28
Total 11602782.05 0.00 11602782.05
PL Estimate Page-1
Construction of Two stored building with terrace with provisions for EI & PH works of Biraja
Women’s College at Jajpur Town
AMOUNT
SL.NO SOR/ AMOUNT
DESCRIPTION OF WORK UNIT QTY. RATE (RS) NON SOR
. MR SOR (RS)
A INTERNAL PH WORKS
Providing all materials, labour, T&P for laying of
following dia CPVC pipes S.D.R - 13.5 as per IS-15778
with ISI mark including fixing of required size CPVC fittings
like,bend,Tee,elbow,offsets,etc. and the same fixed on wall
or floor with holder bat clamps screw etc. including testing
the joints with required water presure.The cost
inclusive of all taxes,duties,transportation scaffolding
a 20mm diameter
Ground floor Rmt 200 224.20 44840.00
1st Floor Rmt 210 230.10 48321.00
b 25mm diameter
Ground floor Rmt 20 307.98 6159.60
1st Floor Rmt 20 313.88 6277.60
c 32mm diameter
Ground floor Rmt 12 438.96 5267.52
1st Floor Rmt 12 444.86 5338.32
Providing and fixing to wall or ceiling and floor pvc pipes 0
conforming to ASTM-D-1785/89 (Sch-40) and pipe fittings
of the following nominal bore with clamps including
making good the wall, ceiling and floor all complete
as per specification complete. Make - Ashirwad,
Astral,Supreme
a 20mm diameter
Ground floor Rmt 75 217.12 16284.00
1st Floor Rmt 135 230.10 31063.50
b 32mm diameter
Ground floor Rmt 10 368.16 3681.60
1st Floor Rmt 0 0.00 0.00
c 40mm diameter
Ground floor Rmt 10 414.18 4141.80
1st Floor Rmt 10 420.08 4200.80
d 50mm diameter
Ground floor Rmt 0 0.00 0.00
1st Floor Rmt 10 469.64 4696.40
Terrace floor Rmt 170 519.20 88264.00
e 65mm diameter
Ground floor Rmt 0 0.00 0.00
1st Floor Rmt 0 0.00 0.00
Terrace floor Rmt 170 744.58 126578.60
Providing and fixing to wall or ceiling and floor pvc pipes 0
conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings
of the following nominal bore with clamps including
making good the wall, ceiling and floor all complete
as per specification complete. Make - Ashirwad,
Astral,Supreme
a) 65mm dia pipe 0
Ground floor Rmt 40 1137.52 45500.80
1st Floor Rmt 5 1143.42 5717.10
Terrace floor Rmt 40 1194.16 47766.40
AMOUNT
SL.NO SOR/ AMOUNT
DESCRIPTION OF WORK UNIT QTY. RATE (RS) NON SOR
. MR SOR (RS)
Providing all material, labour,T&P for fitting & fixing of 0
following water supply fittings of Brass Ball Valve with
jointing materials etc. including testing the joints with
4 MR required water pressure. The cost inclusive of all taxes,
duties, transportation, scaffolding etc. all complete as
per specification & direction of EIC. Make - Zoloto,
Jainsons
a) 65mm dia brass ball valve Nos 4 7940.22 31760.88
b) 50mm dia brass ball valve Nos 4 3776.00 15104.00
c) 32mm dia brass ball valve Nos 6 1833.72 11002.32
f) 20mm dia brass ball valve Nos 4 723.34 2893.36
Supplying, installing, testing and commissioning
butterfly valves with standard lever confirming to IS
13039 with necessary connecting fittings like flanges ,nuts
and bolts etc., complete. as per direction of Engineer- in-
Charge. including testing the joints with required water
pressure. The cost inclusive of all taxes, duties,
transportation, scaffolding etc. all complete as per
specification & direction of EIC. Make - Zoloto, Jainsons
a 50mm dia Nos 1 3239.10 3239.10
b 65mm dia Nos 1 3465.66 3465.66
Cutting grooves in pucca floors and walls for taking
6 MR GI/PVC pipes & making good the damages as per Rmt 300 152.22 45666.00
specification complete.
supplying all materials, labour, T&P and cutting holes
through existing brick work including making good the
damages in cement mortar (1:4) for taking G.I. Pipes
7 MR Nos 30 42.48 1274.40
and fittings/ P.V.C. pipes and fittings etc. all
complete as per P.H. specification and direction of
Engineer-in-charge.
Providing all labour ,T&P for cutting holes in R.C.C floors
and roofs for passing G.I / P.V.C pipes and fittings etc and
repairing the holes after inspection of pipes etc with
8 MR cement concrete (1:2:4) including finishing complete so as Nos 100 129.80 12980.00
to make it leak proof. including cost of all materials, curing,
conveyance, taxes, duties etc. all complete as per
specification & direction of Engineer-in-charge.
Providing all materials, labour, T&P for fitting and fixing
white glazed vitreous china water closet (European pattern
Coupled Closets) with solid seat cover ,control plate &
Cistern with Lid of standard quality approved make
9 MR Nos 28 18337.20 513441.60
including supply of sutaible for EWC bolt & clamp
including cost of all taxes and conveyance as per
specification all complete as per direction of Engineer-in-
charge.
JAQUAR- CNS-WHT-963SPP - EWC or equivalent
JCS-WHT-2400S- CISTERN or equivalent
JCP-CHR-292415 - CONTROL PLATE or equivalent
Providing all materials, labour, T&P for fitting and fixing
white glazed vitreous china water closet (PH toilet -
European pattern Coupled Closets) with solid seat cover
,control plate, grab bar & Cistern with Lid of standard
10 MR Nos 2 214171.18 428342.36
quality approved make including supply of sutaible for
EWC bolt & clamp including cost of all taxes and
conveyance as per specification all complete as per
direction of Engineer-in-charge.
JAQUAR- CNS-WHT-963SPP - EWC or equivalent
JCS-WHT-2400S- CISTERN or equivalent
JCP-CHR-292415 - CONTROL PLATE or equivalent
GRAB BAR 692mm LONG, WHITE -JAGUAR- WAC- 0
WHTBR0600 or equivalent
GRAB BAR VERTICAL SWING , WHITE -JAGUAR- WAC- 0
WHT-BG0800 or equivalent
AMOUNT
SL.NO SOR/ AMOUNT
DESCRIPTION OF WORK UNIT QTY. RATE (RS) NON SOR
. MR SOR (RS)
Providing all materials and labour for fitting and fixing of
following size white glazed vitreous china wash hand
basin of approved make with supply & fixing of basin
bolts & screw,32mm PVC waste pipe of approved
11 MR Nos 12 5676.98 68123.76
quality including cutting the walls & floor and making good
the damages with cement concrete (1:2:4) etc. with all
taxes, duties,transportation etc. all complete as per
direction of EIC.
JAQUAR- OPS-WHT-15801- basin or equivalent
Jaquar - ALD-CHR-769L250X190 -trap or equivalent
JAGUAR- ALD-CHR-709 - waste coupling or equivalent
Providing all materials , labour ,T&P and fittings and fixing 0
of different water supply (CP on Brass) fitting as per IS
specification & approved make of following sizes and
specification with leak proof threaded joints with
12 MR threadseal tape or any other method as required, including
all taxes, duties, transportation etc., testing and
rectification of defects after testing complete as per
direction of Engineer-in-charge.
Make : Hindware/Jaquar.
a) 15mm dia CP Bib cock (short body)with wall flange Nos 10 1064.36 10643.60
JAGUAR- CON-CHR-037KN or equivalent
b) 15mm dia CP Angle stop cock with wall flange Nos 40 861.40 34456.00
JAGUAR- CON-CHR-053KN or equivalent
c) 15mm C.P.Pillar Cock Nos 12 2185.36 26224.32
JAGUAR-FLR-CHR- 5031NG or equivalent
d CP Soap dish Nos 12 1646.10 19753.20
JAGUAR-ACN-CHR-1131N or equivalent
e CP square Towel Ring Nos 12 1239.00 14868.00
JAGUAR-ACN-CHR-1121N or equivalent
f CP Toilet Paper Holder Nos 28 762.28 21343.84
JAGUAR- ACN-CHR-1151N or equivalent
g CP 20mm dia x 610mm long towel rod Nos 10 1384.14 13841.40
JAGUAR- ACN-CHR- 1111SM or equivalent
h 15mm dia steel braided connection pipe Nos 125 362.26 45282.50
JAGUAR- ALD-805B or equivalent
Providing all materials , labour ,T&P and fittings and fixing 0
of Following Size on Extension piece (S.S/CP on Brass)
approved make of following sizes and specification with
leak proof threaded joints with spun yarn and white zinc or
any other method as required including all taxes, duties,
transportation etc., testing and rectification of defects
after testing complete as per direction of Engineer-in-
charge.
15mmx65mm C.P./S.S Extension piece Nos 50 54.28 2714.00
Providing all materials, labour & fitting and fixing 100mm
PVC multi floor trap with cement mortar (1:4) with all
14 MR taxes, duties etc. all complete as per specification & Nos 53 304.44 16135.32
direction of Engineer-in-charge. Make - Ashirwad,
Astral, Supreme
a) 100mm PVC multi floor trap
Supplying, fixing and testing PVC 'P' trap with SS frame
15 MR and cover fixed on a bed of cement concrete with (Heavy Nos 15 587.64 8814.60
duty type) etc., complete.
AMOUNT
SL.NO SOR/ AMOUNT
DESCRIPTION OF WORK UNIT QTY. RATE (RS) NON SOR
. MR SOR (RS)
Providing all materials, labour, T&P for fitting and fixing of
UPVC SWR pipes (Type-B) confirming to IS-13592/1992
with latest revision & ISI mark both below & above ground
level or fixing on wall surface upto 2nd floor roof including
scaffolding wherever necessary with requisite testing. The
cost inclusive of all taxes, transportation, loading &
unloading etc. all complete as per specification & direction
of the Engineer-in-charge.
Ashirwad/ASTRAL/ORIPLAST/SUPREME/EQUIVALENT.
a 75mm diameter double socket
Ground floor Rmt 40 442.50 17700.00
1st Floor Rmt 40 446.04 17841.60
2nd Floor Rmt 50 449.58 22479.00
b 110mm diameter double socket
Ground floor Rmt 20 626.58 12531.60
1st Floor Rmt 20 630.12 12602.40
2nd Floor Rmt 30 633.66 19009.80
Providing all materials, labour, T&P, fitting and fixing of
following dia UPVC SWR fittings of approved make
confirming to IS 14735/1992 with ISI mark both below &
above ground level or fixing on wall surface upto 2nd floor
roof including scaffolding wherever necessary with
requisite testing. The cost inclusive of all taxes,
transportation, loading & unloading etc. all complete as
per specification & direction of the Engineer-in-
charge.Make:Ashirwad/
ASTRAL/ORIPLAST/SUPREME/EQUIVALENT.
a) 110mm S Trap Nos 35 866.12 30314.20
b) 110mm P Trap Nos 5 605.34 3026.70
c 110mm Cross Tee Nos 30 425.98 12779.40
d 110mm Single Tee with door Nos 20 503.86 10077.20
e 110mm Single Tee Plain Nos 20 430.70 8614.00
f 110mm Plain Bend Nos 50 277.30 13865.00
g 110mm Door Bend Nos 10 344.56 3445.60
h 110mm Vent Cowl Nos 4 118.00 472.00
i PVC clamp suitable for 110mm dia pipe Nos 15 100.30 1504.50
j 110x75 Reducing Y without door Nos 10 456.66 4566.60
k 75mm Cross Tee Nos 20 322.14 6442.80
l 75mm Single Tee Plain Nos 10 240.72 2407.20
m 75mm Plain Bend Nos 10 219.48 2194.80
n 75mm Door Bend Nos 5 264.32 1321.60
o 75mm Vent Cowl Nos 5 87.32 436.60
p PVC clamp suitable for 75mm dia pipe Nos 15 90.86 1362.90
q 75 mm End cap Nos 128.62 0.00
r 110 mm End cap Nos 168.74 0.00
s 75 mm threaded cleanout plug Nos 5 192.34 961.70
t 110 mm threaded cleanout plug Nos 5 366.98 1834.90
AMOUNT
SL.NO SOR/ AMOUNT
DESCRIPTION OF WORK UNIT QTY. RATE (RS) NON SOR
. MR SOR (RS)
Providing all materials, labour, T&P for fitting and
fixing of UPVC 6 kg/cm2 pressure pipes IS4985 for
waste connection from wash basin,kitchen sinks with
latest revision & ISI mark both below & above ground level
or fixing on wall surface upto 8th floor roof including
scaffolding wherever necessary with requisite testing. The
cost inclusive of all taxes, transportation, loading &
unloading etc. all complete as per
specification & direction of the Engineer-in-charge. Make :
Ashirwad/ ASTRAL/ORIPLAST/SUPREME/EQUIVALENT.
a 40mm dia UPVC pressure pipe
Ground floor Rmt 12 601.80 7221.60
1st Floor Rmt 12 613.60 7363.20
2nd Floor Rmt 16 625.40 10006.40
Supplying, fixing and testing PVC rain water collection
kurra with leaf trap grating made out of UPVC with
flange complete.(Roof Corner Outlet Pasted Type
Fitting)Make - Ashirwad, Astral, Supreme
a 110 mm kurra Nos 8 2253.80 18030.40
20 MR Cement Concrete (1:4:8) for Terrace pipes pedastal cum 5 4284.58 21422.90
Fixing 600x450mm bevelled edge mirror of superior glass
mounted on 6mm thick A.C sheet or plywood sheet and
fixed to wooden plugs with Chromium Plated brass
21 MR Nos 12 853.14 10237.68
screws and washers complete as per specification
and direction of the Engineer in charge
Supply, installation,testing & commisioning of water cooler
cum purifier with chiller in floor of following capacity:60/80
SS including fixing the same on the floor with necessary
water connection & waste waste arrengments with all
labour, T&P etc.all complete as per the specification &
direction of EIC. (As per Model :AG
Green pure Chill 80SS of Aquaguard/IONEXCCHANGE)
Zero B Storage Cooler cum UV Water Purifier 60/80/120
AquaguardGreen Storage Cooler-cum-Purifier Each 2.00 1,12,981.46 2,25,962.92
Model- AG Green Pure Chill 120PSS UV,
Providing and laying Matte Finish Vitrified floor tiles
300x300 mm (thickness to be specified by the
manufacturer) 1st quality conforming to IS: 15622 of
NITCO, SOMANY, ASIAN, KAJARIA or equivalent
approved make, colours & shades, except white, ivory,
grey, fume red brown, laid on 20 mm thick cement mortar
1:4 (1cement:4coarse sand) including pointing the joints
with white cement and matching pigments, etc. complete
as per direction of Engineer-In-Charge at all floors and all
heights.
Ground Floor Sqm 70.00 995.99 69719.36
First Floor Sqm 70.00 1007.33 70513.14
Providing and fixing 1st quality Ceramic glazed
wall tiles conforming to IS : 15622 (thickness to be
specified by the manufacturer) minimum thickness
5mm of NITCO, SOMANY, ASIAN, KAJARIA or
equivalent approved make in all colours, shades except
burgundy, bottle green, black of size 300x200 in skirting
24 MR and dados over 12 mm thick bed of cement mortar 1:3 (1
cement : 3 coarse sand) and jointing with grey cement
slurry @ 3.3 kg per sqm including pointing in white
cement mixed with pigment of matching shade
complete as per direction of Engineer-In-Charge. In
all floors and all heights.
Ground Floor Sqm 320.00 914.82 292741.95
First Floor Sqm 320.00 931.88 298202.05
AMOUNT
SL.NO SOR/ AMOUNT
DESCRIPTION OF WORK UNIT QTY. RATE (RS) NON SOR
. MR SOR (RS)
Supplying and Fixing of Sintex Triple Layer whiteISI
Marked) over head water storage tank with following
capacities conforming to IS : 12701/1996 including cutting
holes through the tank and fixing mild steel tubes and
fittings and providing extra sockets and jam nuts, fixing ball
valve etc, including hoisting upto required elevation and
placing the tank to the required position etc all complete as
per direction of Engineer-in-Charge.(Make -Sintex)
5000 Litres Capacity Triple Layer white Tank for Drinking&
Flushing & Fire Fighting
Total Rs. 3360794.46
B EXTERNAL WATER SUPPLY
Providing and fixing to wall or ceiling and floor pvc
pipes class conforming to ASTM-D-1785/89 (Sch-40) and
pipe fittings of the following nominal bore with clamps
including making good the wall, ceiling and floor all
complete as per specification complete.Make :
Ashirwad/ ASTRAL/ORIPLAST/SUPREME/EQUIVALENT.
a 65 mm dia Rmt 330 1135.16 374602.80
b 65 mm dia Rmt 500 292.64 146320.00
Supplying, fixing and testing Puddle flanges for inlet,
outlet, vent and overflow pipes, fittings with D.I frame and
2 MR cover to overhead water tank and under ground water tank Lot 1 356292.74 356292.74
complete with steps as shown on the
drawings etc., complete.
i) DI manhole frame and cover (medium duty)
(weight=15 KN.) with locking facility - 14 nos
(ii)150mm dia - 4 nos
(iii)80 mm dia - 4 nos
(iii)100 mm dia -2 nos
(v) 65 mm dia -8 nos
(vi) 50 mm dia -8 nos
(vi) 32mm dia -14 nos
viI) step ladder (Aluminium ladder) -14 nos
(vii) 250mm dia -2nos
(viii) 200mm dia -2 nos
Supplying, installing, testing and commissioning
butterfly valves with standard lever confirming to IS
13039 with necessary connecting fittings like flanges ,nuts
and bolts etc., complete. as per direction of Engineer- in-
3 MR Charge. including testing the joints with required water
pressure. The cost inclusive of all taxes, duties,
transportation, scaffolding etc. all complete as per
specification & direction of EIC. Make -
Zoloto/Audco/Jainson
a 50mm dia Nos 4 3236.74 12946.96
b 65mm dia Nos 4 3464.48 13857.92
c 80 mm dia Nos 0 3717.00 0.00
Supplying, installing and commissioning approved make CI
/CS flanged brass `Y' strainer with necessary nuts and
bolts, neoprene rubber gaskets, flanges, etc.., complete.-
Make- Zoloto/Jainson
a 50 mm - CI Nos 2 6636.32 13272.64
b 65 mm - CI Nos 2 10398.16 20796.32
c 80 mm - CI Nos 4 11798.82 47195.28
Supplying, fixing in position approved make CI non-
5 MR return valve conforming to IS codes with conplete
accessories etc., complete.- Make- Zoloto/Jainson
a 50 mm Nos 4 7164.96 28659.84
AMOUNT
SL.NO SOR/ AMOUNT
DESCRIPTION OF WORK UNIT QTY. RATE (RS) NON SOR
. MR SOR (RS)
b 65 mm Nos 4 9796.36 39185.44
Supplying, installing, testing and commissioning approved
make water level controller with alarm for the Underground
6 MR Sump. The quoted rate shall include for necessary wiring nos 7 4632.68 32428.76
in PVC conduit between the control panel, underground
sump and overhead tank.(length of cable approx. 60 mts.)
Providing ,fixing , testing and commissioning of
Monoblock type Domestic Water lift pumps set 2 no’ s (1
Working + 1 Standby) to OHT Centrifugal End Suction
Close Couple pumps of Water Flow Rate of each pump
2 cum/hr with the head of 30 MWC adequate the casing
shall be cast iron and impeller shall be Stainless steel the
pump HP capacity shall be provided by manufacturer at
suitable head to work on 3Ph, 50Hz, 400/440V with
7 MR necessary unions, flanges, foundation bolts, RCC footing
in 1:2:4 etc. complete. Vendor shall consider he electrical
control panel comprising of all accessories such as
MCB ,isolation valve,non return valve, pressure switches,
pressure transducers, control wiring & End terminations ,
earth strip of GI 25 x 3 mm,cable tray and
any other necessary imports etc. complete. water supply (
GRUNDFOS)
1 Working + 1 Stand-by) - Cap :2 Cum/hr @ 30 MWC Set 3 296621.32 889863.96
Pressure switch Nos 2
Pressure guage Nos 2
Control panel Nos 1
Control cable as per OEM Rmt 40
Cable tray Rmt 40
Providing ,fixing , testing and commissioning of
Monoblock type Domestic Water lift pumps set 2 no’ s (1
Working + 1 Standby) to OHT Centrifugal End Suction
Close Couple pumps of Water Flow Rate of each pump
2 cum/hr with the head of 30 MWC adequate the casing
shall be cast iron and impeller shall be Stainless steel the
pump HP capacity shall be provided by manufacturer at
suitable head to work on 3Ph, 50Hz, 400/440V with
8 MR necessary unions, flanges, foundation bolts, RCC footing
in 1:2:4 etc. complete. Vendor shall consider he electrical
control panel comprising of all accessories such as
MCB ,isolation valve,non return valve, pressure switches,
pressure transducers, control wiring & End terminations ,
earth strip of GI 25 x 3 mm,cable tray and
any other necessary imports etc. complete. ( GRUNDFOS)
(1 Working + 1 Stand-by) - Cap :5 Cum/hr @ 45 MWC Set 0 428196.04
Pressure switch Nos 2
Pressure guage Nos 2
Control panel Nos 1
Control cable as per OEM Rmt 40
Cable tray Rmt 40
Supplying, installing and commissioning approved make
brass garden valve necessary nuts and bolts, neoprene
9 MR Nos 25 1355.82 33895.50
rubber gaskets, flanges, etc.., complete.- Make-
Zoloto/Jainson
Providing and fixing water meter with direct reading
dial in KL with all integral parts of gun metal or brass
with necessary fitting such as threaded pieces, unions
10 MR Nos 2 9458.88 18917.76
pressure gauge and isolation cock,
flanges piece for future removal, flanges/unions
complete.
AMOUNT
SL.NO SOR/ AMOUNT
DESCRIPTION OF WORK UNIT QTY. RATE (RS) NON SOR
. MR SOR (RS)
Labour for drilling a perfectly vertical bore hole for a
specified dia for a specified depth below G.L through
consolidated and un-consolidated rocks with down the hole
hammer drilling rig or combination drilling rig (1200 cfm/
300 psi) as required to suit the site condition as per
the direction of EIC including use of own rigs with its
accessories, T&P & consumables etc. for lowering of
11 MR 200mm dia PVC/GI pipes for housing fitted with socket and
with or without well screen as per the necessity for soft,
medium, hard and boulder formation (GI/ PVC casing
pipes, if required to prevent collapse of over burden is to
be provided by the contractor including lowering and
withdrawing after completion of the
Tube Well).
Labour for drilling of 200mm dia & 150mm dia bore from '0'
mtr. to '200' mtr.
Providing & lowering the following size PVC pipes (ASTM)
with or without slotted pipes as per the necessity from
1.00m above ground level up to required depth and fitting
b and fixing up in perfectly vertical position, including cutting,
threading pipe and slotted pipe and supplying and fixing all
jointing materials, T&P etc. complete and keeping the top
of the casing pipe threaded including plugging the tube well
Lowering of 200mm (8'') dia PVC plastic pipes Sch-80 as
per ASTM-D- 1785/2004 upto required depth. (Data for mtr 200 861.40 172280.00
Cleaning and developing the tube well using their own
compressor continuously worked till clear and adequate
c discharge is obtained from the tube well including supply Job 2 5240.38 10480.76
and use of all necessary equipment , labour, all
consumables, running & hire charges of machinaries etc.
Supplying all materials, labour & tools and plant and
grouting with cement slurry for sanitary sealing around the
GI/PVC casing pipe up to 3mtrs below ground level to
plug the bore hole including cost of cement all
complete as per specification & direction of the Engineer-in-
Charge.
Sanitary sealing up to 3 Mtr. below ground level. Job 2 2498.06 4996.12
e (200 mm (8”) PVC Pipe)ASTM as per EPM Rate. Rmt 200 859.04 171808.00
Providing, fitting & fixing of 500mm dia pre-cast factory
made man hole cover with frame. (Medium Duty)
Supply installing testing & commisssioning of submersible
type bore well motor pump of suitable hp multistage pump
include of suitable size of isolation valve ,NRV etc and
required length of cable with bore well starter & outer box
12 MR metal type with box wiring, plwood sheets, indicator, Bolts, Set 1 214252.60 214252.60
Cutouts, Amps metre, Volts metre, Preventer,Autostart unit
3 way, 5way, Relay, Wires etc Complete . The qouted rate
also inclussive of maintanace chamber with heavey duty
cover as required. . Make - Kirloskar, Wilo,Grandfous
Pressure switch Nos 1
Pressure guage nos 1
Control panel nos 1
Control cable as per OEM Rmt 50
Supply installing testing & commisssioning of 50 mm dia
13 MR Rmt 400 580.56 232224.00
HDPE PN 12.5 Guage pipe with fittings etc complete .
Construction of maintanance chamber with 230mm
best quality approved Table Moulded bricks in CM 1:4
over a bed of 100mm thick PCC 1:4:8, internal walls
plastered in 'CM 1:3 and external wall with CM 1:3 with
14 MR sponge finish, benching and channelling in PCC 1:4:8. Nos 2 20425.80 40851.60
Supplying and fixing cover of size
800mmx900mmx600mm height. (weight 110 'Kgs.) The
andback filling etc., complete.
#VALUE!
Total Rs. 3032708.56
AMOUNT
SL.NO SOR/ AMOUNT
DESCRIPTION OF WORK UNIT QTY. RATE (RS) NON SOR
. MR SOR (RS)
C EXTENAL SEWAGE
Providing all materials, labour, T&P for fitting and 0
fixing of UPVC 6 kg/cm2 pressure pipes IS4985 for
waste connection with latest revision & ISI mark both
below & above ground level or fixing on wall surface upto
2nd floor roof including scaffolding wherever necessary
with requisite testing. The cost inclusive of all taxes,
transportation, loading & unloading etc. all complete as
per specification & direction of the Engineer-in-
charge.Make:Ashirwad/
ASTRAL/ORIPLAST/SUPREME/EQUIVALENT.
i 400 mm dia 4617.34 0.00
ii 355 mm dia 3484.54 0.00
iii 315 mm dia 2645.56 0.00
iv 280 mm dia 1131.62 0.00
v 225 mm dia 938.10 0.00
vi 200 mm dia R/M 3 938.10 2814.30
vii 160 mm dia R/M 100 757.56 75756.00
viii 110 mm dia R/M 30 441.32 13239.60
Providing all materials, labour, T&P required for
construction of RCC M-
25 man hole chamber of following sizes having cube
strength 250 Kg/cm2 at 28 days confirming to IS-456/2000
& IS-3370 at all locations & height using h.g. stone
aggregate (Crusher broken) of 20mm & down size
including machine mixing, lifting, hoisting, conveying,
placing in position, mechanical consolidation, curing, de-
watering (if required). The minimum thickness of RCC
base slab, all side walls & roof slab shall be not less than
150mm & 125mm (avg.) respectively. The cost shall be
inclusive of rigid, levelled & plumbed centering & shuttering
to required slope, allignment & size for all kinds of RCC
work with steel/ ply centering materials with all bracing,
ties, anchorage & supports and removing the same after
required paid & placing M.S.Reinforcement HYSD bar
of required dia including cutting, bending, straightening
of approved quality as per approved design & drawing &
tying the grills for RCC works & placing in position using
binding wires (18 to 20 gauge soft drawn & cold annealed).
PCC 1:3:6 with 40mm size h.g.c.b. metal of 100mm thick,
moulding & shaping the channel & benching with C.C.
1:2:4 with 12mm size h.g.c.b. chips, 12mm thick cement
plaster 1:3 with cement punning on inner wall surface,
earth work excavation in all types of soil/rock including
cement concrete cutting as per site condition, filling the
foundation base with sand duly watered & rammed,
providing, fitting & fixing of pre-cast factory made man hole
cover with frame (SFRC medium duty) for clear opening
500mm dia, providing, fitting & fixing of poly propylene
steel reinforced man hole steps of approved quality &
size in two parallel line of 300mm spacing in vertical wall
with centre to centre 375mm (staggered) etc.all complete
as per specification & direction of
Manhole chamber of Inner size 900mmx1200mmx 900mm
depth.
Extra for every additional depth of 0.10mtr. or part there of
b) manhole size 15001.34 0.00
900mmx1200mm from 900mm depth upto 2500mm depth.
Manhole chamber of Inner size 900mmx900mmx depth
upto 1500 mm
Manhole chamber of Inner size 600mmx600mm with heavy
duty cover
Manhole chamber of Inner size450mmx450mmx depth
upto 1500 with heavy duty proforated cover
AMOUNT
SL.NO SOR/ AMOUNT
DESCRIPTION OF WORK UNIT QTY. RATE (RS) NON SOR
. MR SOR (RS)
Providing all materials, labour, T&P required for
construction of RCC M- 25 man rain water chamber of
following sizes having cube strength 250 Kg/cm2 at 28
days confirming to IS-456/2000 & IS-3370 at all locations &
height using h.g. stone aggregate (Crusher broken) of
20mm & down size including machine mixing, lifting,
hoisting, conveying, placing in position, mechanical
consolidation, curing, de-watering (if required). The
minimum thickness of RCC base slab, all side walls & roof
slab shall be not less than 150mm & 125mm (avg.)
respectively. The cost shall be inclusive of rigid, levelled &
plumbed centering & shuttering to required slope,
allignment & size for all kinds of RCC work with steel/ ply
centering materials with all bracing, ties, anchorage &
supports and removing the same after required paid &
placing M.S.Reinforcement HYSD bar of required dia
including cutting, bending, straightening of approved
quality as per approved design & drawing & tying the grills
for RCC works & placing in position using binding wires (18
to 20 gauge soft drawn & cold annealed).
PCC 1:3:6 with 40mm size h.g.c.b. metal of 100mm thick,
moulding & shaping the channel & benching with C.C.
1:2:4 with 12mm size h.g.c.b. chips, 12mm thick cement
plaster 1:3 with cement punning on inner wall surface,
earth work excavation in all types of soil/rock including
cement concrete cutting as per site condition, filling the
foundation base with sand duly watered & rammed,
providing, fitting & fixing of pre-cast factory made man hole
cover with frame (SFRC medium duty) for clear opening
a Tank size 3x1.5 m uto 3.5 mtr depth 6 30613.92 183683.52
Labour for drilling a perfectly vertical bore hole for a
specified dia for a specified depth below G.L through
consolidated and un-consolidated rocks with down the hole
hammer drilling rig or combination drilling rig (1200 cfm/
300 psi) as required to suit the site condition as per
the direction of EIC including use of own rigs with its
accessories, T&P & consumables etc. for lowering of
b 200mm dia PVC/GI pipes for housing fitted with socket and 180 735.14 132325.20
with or without well screen as per the necessity for soft,
medium, hard and boulder formation (GI/ PVC casing
pipes, if required to prevent collapse of over burden is to
be provided by the contractor including lowering and
withdrawing after completion of the
Tube Well).
Providing & lowering the following size PVC pipes (ASTM)
with or without slotted pipes as per the necessity from
1.00m above ground level up to required depth and fitting
and fixing up in perfectly vertical position, including cutting,
threading pipe and slotted pipe and supplying and fixing all
jointing materials, T&P etc. complete and keeping the top
c of the casing pipe threaded including plugging the tube well
to prevent entry of foreign materials from above. The cost
inclusive of pipes, fittings, labour, consumables, POL,
consumables with hire & running charges of machinaries
etc. as per specification & direction of EIC.
Lowering of 200mm (8'') dia PVC plastic pipes Sch-80 as
per ASTM-D- 1785/2004 upto required depth. (Data for 180 1269.68 228542.40
Cleaning and developing the tube well using their own
compressor continuously worked till clear and adequate
discharge is obtained from the tube well including supply
d and use of all necessary equipment , labour, all 6 5240.38 31442.28
consumables, running & hire charges of machinaries etc.
all complete as per the direction of the EIC. (By DTH/
Rotary)
AMOUNT
SL.NO SOR/ AMOUNT
DESCRIPTION OF WORK UNIT QTY. RATE (RS) NON SOR
. MR SOR (RS)
Supplying all materials, labour & tools and plant and
grouting with cement slurry for sanitary sealing around the
GI/PVC casing pipe up to 3mtrs below ground level to
plug the bore hole including cost of cement all
complete as per specification & direction of the Engineer-in-
Charge.
Sanitary sealing up to 3 Mtr. below ground level. 6 2498.06 14988.36
f (200 mm (8”) PVC Pipe)ASTM as per EPM Rate. 180 1112.74 200293.20
Providing, fitting & fixing of 500mm dia pre-cast factory
made man hole cover with frame. (Heavy Duty)
Supplying, filling, spreading & leveling stone boulders of
size range 5 cm to 20 cm, in recharge pit, in the required
thickness, for all leads & lifts, all complete as per direction
of Engineer-in-charge. DSR 23.5
23.6 Supplying, filling, spreading & leveling gravels of size
range 5 mm to 10 mm, in the recharge pit, over the
i existing layer of boulders, in required thickness, for all 6 1224.84 7349.04
leads & lifts, all complete as per direction of
Engineer-in-charge. DSR 23.6
23.7 Supplying, filling, spreading & leveling coarse sand of
size range 1.5 mm to 2 mm in recharge pit, in required
thickness over gravel layer,for all leads & lifts, all complete
as per direction of Engineer -incharge. DSR 23.7
Gravel packing in tubewell construction in accordance
with IS: 4097,including providing gravel fine/ medium/
k coarse, in required grading & sizes as per actual 6 1387.68 8326.08
requirement, all complete as per direction
of Engineer-in-charge. DSR 23.8
Providing and fixing factory made precast RCC perforated
drain covers, having concrete of strength not less than M-
25, of size 1000 x 450x50 mm, reinforced with 8 mm dia
four nos longitudinal & 9 nos cross sectional T.M.T. hoop
bars, including providing 50 mm dia perforations @ 100 to
125 mm c/c, including providing edge binding with M.S.
flats of size 50 mm x 1.6 mm complete, all as per direction
of Engineerin- charge.DSR 23.9
Providing all material, labour, T&P and construction of
Gully Trap chamber of size as mentioned below with
250mm nominal size Fly Ash Brick having crushing
strength not less than 75kg/sqcm in CM 1:4 over a bed of
100mm thick C.C. (1:3:6) using 40mm size HG metal,
plastering with 12mm thick cement plaster with cement
punning in cement mortar 1:4 on inner surface and 12mm
thick cement plaster in cement mortar (1:4) on external
surface,fitting & fixing of PVC Gully Trap and pre-cast
factory made (SFRC) cover with frame of opening size
300mmx300mm, moulding and shaping the channel &
benching with C.C (1:2:4) with hard granite chips 12mm
size, earth work excavation in all kinds of soil & rock and
earth levelling the surface around the chamber with
disposal of surplus earth within 50m. lead as per
specification, design & drawing including cost of curing and
all taxes, royalty, cost, conveyance etc. all complete
as per specification & direction of EIC.
5 MR Earth work :
Earth work in hard soil within 50m initial lead & 1.5m initial
lift including dressing, levelling & breaking clods to
maximum 5cm to 7cm & laying in layers not exceeding
0.3m in depth & as per specification & direction of
Department.
Upto 1.50m initial lift 697 107.38 74843.86
Earth work in stoney earth & gravels mixed with
stone boulders not exceeding 0.014 cum in volume
within 50m initial lead & 1.50m lift including dressing,
6 MR levelling & breaking clods to maximum 5cm to 7cm &
laying in layers not exceeding 0.3m in depth & as per
specification &
direction of Department.
AMOUNT
SL.NO SOR/ AMOUNT
DESCRIPTION OF WORK UNIT QTY. RATE (RS) NON SOR
. MR SOR (RS)
Upto 1.50m initial lift 5 168.74 843.70
Excavation of foundation in laterite rock or any hard rock
(other than granite or disintegrated rock) removed by
chiselling including dressing & levelling & benching the bed
not exceeding 1.50m depth & depositing the soil within
initial lead of 50m & as per specification approved by the
department.
Upto 1.50m initial lift 5 782.34 3911.70
Filling foundation trenches and Plinth with excavated &
well watered & rammed etc. complete including labour ,
T&P, lead & lift cost & conveyance, loading,
unloading etc. complete as per specification & direction of
Providing all materials,labour,T&P for construction of
following size Cement Concrete (1:2:4) Pedestal with
12mm size h.g.c.b. chips, PCC 1:3:6 with 40mm size
h.g.c.b. metal, Centering & Shuttering etc. as per approved
9 MR design & drawing for RCC pipe. The cost inclusive of all
taxes, royality, hire & running charges of all
machineries, Transportation charges with all consumables
etc. all complete as per specification &
direction of EIC.
Cement Concrete Pedestal of size
600mmx250mmx450mm ht.
for 200 -350 mm dia RCC pipe 30 808.30 24249.00
Total Rs. 1299351.10
D SEPTIC TANK & SOCK PIT.
Earthwork in excavation in all types of soil for site leveling,
foundation, pits, trenches and other civil works up to and
including 1.5 metre lift and stacking the soil upto a lead of
100 metre and including dewatering, removing slush,
shoring and strutting (as required), complete as per
specification and as directed by the Engineer-In-Charge.
a. All type of Soil Cum 188.21 239.89 45150.45
b. Stoney Earth Cum 80.66 339.72 27401.98
Filling at all depth with available excavated earth (excluding
rock) in trenches, plinth, sides of foundations etc. in layers
2 MR not exceeding 15cm in depth : consolidating each Cum 180.15 133.27 24008.45
deposited layer by ramming and watering complete (lead
upto 100m) as directed by the Engineer-In-charge.
Supplying of filling sand in foundation and over areas
including watering, ramming, consolidating and dressing,
3 MR Cum 26.33 557.48 14678.43
labours, tools, taxes etc. all complete as per the
specification and direction of Engineer-In-Charge.
Providing and laying plain cement concrete 1:3:6 (1
cement: 3 sand: 6 stone agregate 40mm nominal size) as
4 MR levelling course in foundation and plinth etc. including Cum 7.85 5441.84 42718.45
tempering, curring ,shuttering etc.complete all depth and
height.
AMOUNT
SL.NO SOR/ AMOUNT
DESCRIPTION OF WORK UNIT QTY. RATE (RS) NON SOR
. MR SOR (RS)
Providing, lifting, hoisting and laying Reinforced cement
concrete of M-250 grade as per approved designs and
drawings having a minimum compressive strength (in work
test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after
mixing and test conducted in accordance with I.S. 516
using 12 mm. to 20 mm. size black hard crushed broken
granite stone chips and screened and washed sharp sand
for mortar of approved quality from approved quarry,
washed and cleaned ( 20mm. size chips not to exceeds
25 % ) to be mixed in concrete mixture with Portland slag
cement (PSC) including hoisting, lowering, laying and
compaction concrete by using vibrators, watering and
5 MR curing for 28 days, centering and shuttering then after
dismantling and removing debris from the work site and
finishing the exposed surface smooth providing grooves or
beads wherever necessary including cost, conveyance,
loading, unloading, royalties and taxes of all materials and
cost of all labours, sundries, T & P required of the work
etc. complete in all respect as directed by the Engineer-in-
Charge. But excluding cost and conveyance of M.S. rods
or Tor steel and binding wires and labour charges for
straightening, cutting, bending etc. of M.S. rods or tor steel
tying the grills and placing in proper position.
a) Base Cum 20.60 6390.08 131635.60
b) Wall Cum 37.87 13104.02 496249.16
c) Slab Cum 11.15 11303.47 126033.67
Supplying, straightening, cutting, bending, placing in
position and binding reinforcement steel work in
RCC/reinforced brick works as per drawing and
specification including preparation of respective bar
6 MR bending schedule and binding (Binding wire to be used as Qntl 117.13 9636.64 1128739.08
per the IS code) etc. all complete as per direction of
Engineer-In-Charge.Cold Twisted bars, Thermo-
Mechanically-
treated bars.
12mm cement plaster on internal smooth side of
RCC/brick surfaces with cement mortar of mix 1:4 (1
cement : 4 fine sand) including neat cement punning &
7 MR Sqm 190.75 185.78 35437.38
necessary scaffolding, curing etc. all complete at all floors
and all
heights.
Total Rs. 2072052.64
E WATER TREATMENT PLANT - 2 CUM/HR
Design, Supplying, installing, testing and
1 MR commissioning of water teratment plant (WTP). With
below mentioned specifications.
Pressure sand filter of FRP construction with
necessary equipment complete with Frontal piping,
valves, suitable supports for mounting, pressure guage,
orifice plate, filtering media, etc..,complete as per the
1.1 detailed specification for the efficient working of system.
a) Maximum working Pressure shall be 3.5Kg/Sqcm.
b) Back wash duration - 15 minutes.
c) Pressure Drop across unit. - 1.0kg / sq.cm (max).
d) Maximum Test pressure - 7.0kg / sq.cm.
Velocity @ 12 m3/hr/m2 - 1200 dia vessel- FRP with
Activated carbon filter of FRP construction with
necessary equipment complete with Frontal piping,
valves, suitable supports formounting, pressure guage,
orifice plate, filtering media, etc..,complete as per the
1.2 detailed specification for the efficient working of system.
a) Maximum working Pressure shall be 3.5Kg/Sqcm.
b) Back wash duration - 15 minutes.
c) Pressure Drop across unit. - 1.0kg / sq.cm (max).
d) Maximum Test pressure - 7.0kg / sq.cm.
Velocity @ 12 m3/hr /m2 - 800 dia vessel - FRP with
AMOUNT
SL.NO SOR/ AMOUNT
DESCRIPTION OF WORK UNIT QTY. RATE (RS) NON SOR
. MR SOR (RS)
Water softener of FRP construction with necessary
Ancillary equipment complete with piping, valves, ejector,
orifice plate, suitable support for mounting Pressure gauge,
Orifice plate, salt saturator made of corrosion resistant
material and hardness testing kit etc.,Softener also
include initial charge of indion 220NA resin media to suite
the requirement etc., complete as per detailed specification
for the efficient working of the system.
a) Max. working pressure = 3.5Kg / Sqcm.
b) Maximum Test pressure - 7.0kg / sq.cm.
FRP vessel 800 mm dia with MPV Nos 1.00 3,18,600.00 3,18,600.00
Electronic dosing system for disinfection by chlorination &
with pre set dosage based on the quantity of water. The
dosing system shall consists of electronic dosing pump
with positive displacement type with adjustable stroke
length with frequency. The quoted rate shall also
include HDPE chemical preparation tank etc., complete to
make the
operation automatic.
Centrifugal monoblock pumps for filter feed water
inside the pump room. The cost of control panel to be
1.5 included with 2 Nos DOL starter. The pumps shall run Set 2.00 41,300.00 82,600.00
415V / 50HZ electric supply etc., complete.
(1no.Working and 1no. Standby = 1 set)
Inter units connection piping with necessary flanges,
bolts, nuts, neoprene gaskets, welding wherever
necessary, with necessary control valves, non return
valves etc and with one coat of primer and two coats of
approved enamel paint etc.,complete.& installation
cost/Transportation/loading/labour
Total Rs. 9,55,800.00
F PUMP ROOM.
Earthwork in excavation in all types of soil for site leveling,
foundation, pits, trenches and other civil works upto and
including 1.5metre lift and stacking the soil upto a lead of
100 metre and including dewatering, removing
slush,shoring and strutting (as required), complete as per
specification and as directed by the Engineer-In-Charge.
a. All type of Soil Cum 76.27 239.89 18296.72
b. Stoney Earth Cum 32.69 339.72 11105.51
Filling at all depth with available excavated earth (excluding
rock) in trenches, plinth, sides of foundations etc. in layers
2 MR not exceeding 15cm in depth: consolidating each Cum 73.00 133.27 9728.65
deposited layer by ramming and watering complete (lead
upto 100m) as directed by the Engineer-In-charge.
Supplying of filling sand in foundation and over areas
including watering,ramming, consolidating and dressing,
3 MR Cum 10.27 557.48 5725.31
labours, tools, taxes etc., all complete as per the
specification and direction of E.I.C.
Providing and laying plain cement concrete 1:3:6 (1
cement: 3 sand: 6 stone agregate 40mm nominal size) as
4 MR levelling course in foundation and plinth etc. including Cum 3.42 5441.84 18611.10
tempering, curring ,shuttering etc.complete all depth and
height.
Brick work with Fly Ash. Bricks in cement mortar (1:6) in
Super Structure having crushing strength not less than
5 MR Cum 4.83 4786.61 23119.33
75.00 kg/cm2 immerging the bricks in water not less than
six hours before use in masonary.
AMOUNT
SL.NO SOR/ AMOUNT
DESCRIPTION OF WORK UNIT QTY. RATE (RS) NON SOR
. MR SOR (RS)
Providing, lifting, hoisting and laying Reinforced cement
concrete of M-250 grade as per approved designs and
drawings having a minimum compressive strength (in work
test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after
mixing and test conducted in accordance with I.S. 516
using 12 mm. to 20 mm. size black hard crushed broken
granite stone chips and screened and washed sharp sand
6 MR for mortar of approved quality from approved quarry, 0
washed and cleaned ( 20mm. size chips not to exceeds
25 % ) to be mixed in concrete mixture with Portland slag
cement (PSC) including hoisting, lowering, laying and
compaction concrete by using vibrators, watering and
curing for 28 days, centering and shuttering then after
dismantling and removing debris from the work site and
finishing the exposed surface smooth providing grooves or
a) Footings :- Cum 1.52 6390.08 9712.92
b) Column up to plinth :- Cum 0.75 13104.02 9828.01
c) Column in S.S :- Cum 0.90 13104.02 11793.62
d) Beam Cum 14.83 13104.02 194332.59
e) Lintel Beam Cum 0.58 10649.83 6176.90
f) Slab Cum 5.11 11303.47 57760.72
g) Staircase Cum 0.88 12544.50 11039.16
Supplying, straightening, cutting, bending, placing in
position and binding reinforcement steel work in
RCC/reinforced brick works as per drawing and
specification including preparation of respective bar
7 MR bending schedule and binding ( Binding wire to be used as Qntl 44.36 9636.64 427481.14
per the IS code) etc. all complete as per direction of
Engineer-in-charge.Cold Twisted bars, Thermo-
Mechanically-
treated bars.
12mm cement plaster on external RCC/brick surfaces in
cement plaster 1:6(1
8 MR Sqm 89.46 162.47 14534.94
cement : 6 coarse sand) including necessary scaffolding,
curing etc. all complete at all floors and all heights.
16mm cement plaster on internal smooth side of
RCC/brick surfaces with cement mortar of mix 1:6 (1
9 MR Sqm 71.97 231.16 16636.73
cement : 6 fine sand) including necessary scaffolding,
curing etc. all complete at all floors and all heights.
6 mm cement plaster on internal smooth side of RCC/brick
surfaces with cement mortar of mix 1:4 (1 cement : 4fine
10 MR Sqm 19.80 180.74 3578.66
sand) including necessary scaffolding, curing etc. all
complete at all floors and all heights.
Providing and fixing Steel work welded in built up
section/framed (including M.S. angle,plate, sq.bar, flat,
m.s.tubular section, Heavy type hinges) work incuding
cutting, hoisting, fixing in position and applying apriming
coat of approved steel primer, two or more coats of
synthetic enamel paint with approved make and brand in
grating, frames, guard bar, ladder, railings for balconies
and straircase, brackets, gates and similar works as per
direction of Engineer-In-Charge. (All structural steel
contractor's own supply).
Providing & Applying priming coat with Cement base
primer of approved brand and manufacture on
12 MR plaster/putty surface as per the instruction of Engineer-In- Sqm 161.43 68.59 11073.03
Charge at all elevations and all heights including all
material & labour complete.
Providing and applying to outside walls with two or more
coats of Anti- Fungal Weather coat water proofing paint
including scaffolding and cleaning the surface before
13 MR application of approved colour and manufacture as per Sqm 89.46 83.44 7464.35
specification, instruction of Engineer-in-charge at all
elevations including all material labour complete. in all
floors and all heights.
Providing & painting Two coats of Distempering paint with
1st quality oil bound washable distemper of approved
14 MR brand and manufacturer to give an even shade as per the Sqm 71.97 78.48 5648.34
instruction of Engineer - In- Charge at all elevations
including all material & labour complete.
AMOUNT
SL.NO SOR/ AMOUNT
DESCRIPTION OF WORK UNIT QTY. RATE (RS) NON SOR
. MR SOR (RS)
Providing & Painting with synthetic enamel paint of
approved brand and manufacture to give an even shade as
15 MR Sqm 3.33 156.94 522.61
per the instruction of Engineer - In- Charge at all floors and
all heights including all material & labour complete.
Total Rs. Total Rs. 882075.28
GRAND TOTAL Rs. 11602782.05
GRAND TOTAL Rs. 11602782.05
Construction of Two stored building with terrace with provisions for EI & PH works of
Biraja Women’s College at Jajpur Town
SUMMARY OF ELECTRICAL WORK
SL.NO NON-SOR TOTAL AMOUNT
SL.NO NON-SOR TOTAL AMOUNT
DESCRIPTION OF WORK AMOUNT
. AMOUNT (Rs.) (RS)
I INTERNAL ELECTRICAL WORKS 7736902.22 2,552.36 77,39,454.58
II External ELECTRICAL WORKS 4524187.00 0 45,24,187.00
Total C/F To Summary 1,22,61,089.22 2,552.36 1,22,63,641.58
1/1 Int Electrical_Summary
BIRAJA GIRLS COLLEGE AT JAJPUR
INTERNAL ELECTRICAL WORKS
SL.N SOR/ DSR AMOUNT NON AMOUNT
DESCRIPTION OF WORK UNIT QTY. RATE (RS)
O. 2018 SOR (RS) SOR (RS)
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5
sq.mm FRLS PVC insulated copper conductor single core cable in surface /
recessed medium class PVC conduit,with modular switch, modular plate,
suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated
copper conductor single core cable etc. as required.
Wiring for light /power plug with 2 x 4 Sq.mm. FRLS PVC insulated, copper
conductor single core cable in surface / recessed medium class PVC
conduit along with 1 no. 4 Sq.mm FRLS PVC insulated copper conductor
single core cable for loop earthing as required.
Wiring for circuit / submain wiring alongwith earth wire with the
3 1.14 following sizes of FRLS PVC insulated, copper conductor single core cable in
surface/ recessed medium class PVC conduit as required.
1.14.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire. m 5400.00 200.48 1082592.0
3.1 1.14.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire. m 3100.00 220.64 683984.0
3.2 1.14.4 2 x 6 sq.mm. + 1 x 6 sq.mm. Earth wire m 1400.00 249.00 348600.0
3.3 1.14.11 4 x 16 sq.mm. + 2 x 6 sq.mm. Earth wire m 500.00 752.00 376000.0
Supply and fixing of following sizes of medium class PVC conduit along with
4 1.21 accessories in surface/recess including cutting the wall and making good the
same in case of recessed conduit as required.
Supply and fixing of suitable size GI box with modular plate and cover in
front on surface or in recess including providing and fixing 3 pin 5/6 amps
modular socket outlet and 5/6 amps. modular switch, connection etc. as
required. Each
Supply and fixing of suitable size GI box with modular plate and cover in
front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16
amps modular socket outlet and 15/16 amps. modular switch, connection etc.
as required. Each
Supply and fixing two module stepped type electronic fan regulator on the
7 1.25 existing modular plate switch box including connections but excluding 140.00 450.00 63000.0
modular plate etc. as required. Each
DISTRIBUTION BOARDS & MCB's
Supplying and fixing 5 amps. to 32 amps. rating, 240/415 V, 10kA, "C"
curve, miniature circuit breaker (MCB) suitable for inductive load of
8 following poles in the existing MCB DB complete with connections,
testing and commissioning etc. as required.
2.10.1 single pole Each 150.00 199.00 29850.0
Supplying and fixing following way, horizontal type three pole
and neutral, sheet steel, MCB distribution board, 415 V, on
surface/ recess, complete with tinned copper bus bar, neutral
bus bar, earth bar, din bar, interconnections, powder painted
including earthing etc. as required. (But without MCB/RCCB/
Isolator)
2.4.3 8 way, Double door Each 3.00 4601.00 13803.0
10.00 Supplying and fixing following rating, four pole, (three phase and neutral),
415 volts, residual current circuit breaker (RCCB), having a sensitivity current
upto 300 milliamperes in the existing MCB DB complete with connections,
testing and commissioning etc. as required.
2.15.3 63 amps Each 2 2,777.00 5,554.00
Supplying & fixing suitable size GI box wih modular plate and
cover in front on surface or in recess including providing and
fixing 25 A modular socket outlet and 25 A modular SP MCB, "C"
curve including connections, painting etc. as required
12 Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for
connections etc. as required (Make-Obo/ Aps)
13 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for
connections etc. as required.(Make-Obo/ Aps)
14 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop
5.18 earthing along with existing surface / recessed conduit / submain wiring / m 250 37.00 9,250.00
cable as required. (Make-Obo/ Aps)
15 Providing and fixing 4 mm dia copper wire on surface or in recess for loop
5.19 earthing along with existing surface / recessed conduit / submain wiring / m 150 108.00 16,200.00
cable as required. (Make-Obo/ Aps)
1/3 Internal
SL.N SOR/ DSR AMOUNT NON AMOUNT
DESCRIPTION OF WORK UNIT QTY. RATE (RS)
O. 2018 SOR (RS) SOR (RS)
16 Earthing with GI earth pipe 4.5 meter long,40mm dia incluiding accessories
and providing masonry enclosure with cover plate having locking
arrangement and watering pipe etc with charcoal/coke and salt as required
Lightining Protection System 0.00
17 Supply , Installation, Testing & commissioning of Air Terminal ESE -50. Air
Terminal comprised of separate electrically isolated dual copper panels
surrounding an Earthed central finial should be coated with chrome for
environmental protection.The upper section of the central finial shall be rated
to withstand 40KA impulse current and it should be made up of solid brass
rod and its length should be more than 85mm above the surrounding
panels.(Make:Stromking/ Satalite-3/Indilac) The mounting pole used to
support the lightning air terminal shall either be a supporting mast or Free
standing mast at a ideal height of 03 metres above to be area protected or as
per required level of protection. If any height restrictions are there then min
height should be 2mtr but radius of protection will change according to
height.(Make:Stromking/ Satalite-3/Indilac) Supply& install of 30 meter
70sq.mm cross section down conductor of single core flexible Copper cable
made of min.990Nos copper strands of 3mm dia and having PVC insulation
of min. 3mm thickness and overall dia of 16mm. It should be fixed using
MR SS/GI saddles & fixtures every 0.5mtr Maintenance free Safe Earthing Each 255091.22 1 2,55,091.22
Electrodes with ISI G.I. pipe dia60mm as Secondary electrode with wall
thickness of 2.6 mm and the Primary Earthing Electrode will be 32mm X
6mm X 1no M.S. hot dipped galvanized strip filled with a highly conductive &
non-corrosive compound in between the Primary Earthing and the secondary
Earthing, the Surface Area in mm will be 5,65,200 for 3mtrs length and Cross
Sectional Primary conducting area is 192 sq.mm.Ground Filling Compound
filled surrounding to earthing electrode. It should absorb the moisture from
surrounding area and it should be non corrosive in nature. It should maintain
the constant ohmic value for long life. It should be supplied in packing of
25kgs bag.Lightning Strike Recorder (L.S.R.): Supply of Australian make
L.S.R. It should be non electronic& non- resettable type having 7 digits
display &enclosed in an IP-67 enclosure with minimum sensitivity of 1000A &
maximum capacity of 220KA tested on 8/20 micro second wave from as per
IEC 60-1: 1989. It should be non electronic type and does not require
external power supply for working. Supplier should do on site testing of LSR,
LIGHTING FIXTURES & FANS
Supply, installation, testing and commissioning of wall / ceiling / LED light
18 MR luminaires with all accessories as per standard item etc complete as required
as per the standard catalogue item.
a Supply, installation, testing and commissioning of Aluminium, CRC Sheet
MR base,mild steel arm, SS Finish, Acrylic diffuser, 5W Led Picture Light as per Nos. 350.00 1850.00 647500.00
Lustre item No. Li-36001-5/ Philips as per Interior design.
b Supply, installation, testing and commissioning of Aluminium, CRC Sheet
MR base,mild steel arm, SS Finish, Acrylic diffuser, 20W Led Picture Light as per Nos. 150.00 3650.00 547500.00
Lustre item No. Li-36004-20 / Philips as per Interior design..
c Supply, installation, testing and commissioning of COB based down light,
Housing made of Cast aluminum, power coated, Acrylic diffuser.16W Led
MR Nos. 120.00 3520.00 422400.00
Down Light as per Lustre item No. Li-14035-16/ Philips as per Interior
design..
d Supply, installation, testing and commissioning of Surface mounted LED
downlighter(round shape) with lumen output minimium 1000 lumens,
MR CRI>70,power consumption 10-15W max. , Constant Current electronic Nos. 60.00 2250.00 135000.00
Driver, Color temperature option of 6500K with all accessories as per Luster /
Philips as per Interior design.
e Supply, installation, testing and commissioning of LED Based LED
Bulkhead with High Pressure Die Cast Aluminium Body provided with
Polycarbonate cover, System Lumen Package of 600 lm and a maximum
MR Nos. 32.00 1850.00 59200.00
System Wattage of 10 Watts, Ingress Protection Rating of IP66 and IK Rating
of IK09, Operating Voltage Range of 120-277V AC as per Luster / Philips as
per Interior design...,
f Supply, installation, testing and commissioning of Flexible Non Waterproof.
MR 15W Led Strip (5 meter) Light with driver as per Lustre item No. Li-42002-15 / Nos. 10.00 2850.00 28500.00
Philips as per Interior design.
g Supply, installation, testing and commissioning of Hanging Light as per
MR Lustre item No. Li-3424/1 1xGLS/RetrofitCFL/LED E-27,Spun Aluminium Nos. 12.00 4560.00 54720.00
Housing Top Plate, Make Luster / Philips as per Interior design.
2/3 Internal
SL.N SOR/ DSR AMOUNT NON AMOUNT
DESCRIPTION OF WORK UNIT QTY. RATE (RS)
O. 2018 SOR (RS) SOR (RS)
h Supply installation, testing and commissioning of Wall Light as per Lustre
Item No. Li-3314/1W-1XGLS/Retrofit CFL/LED-B-22 Base & Arm Made of
MR Nos. 6.00 6500.00 39000.00
Brass Casting,Span Brass Holder Cap, Glass Diffuser. Make Luster / Philips
as per Interior design.
i Supply installation, testing and commissioning of Wall Light as per Lustre
item No.Li-3338/1W, 1XGLS/Retrofit CFL/LED,E-27, Wooden base Stainless
MR Nos. 3.00 3250.00 9750.00
Steel arm Spun aluminum holder Cap, Frosted glass Diffuser. Make Luster /
Philips as per Interior design.
j Supply installation, testing and commissioning of Cast Aluminum Fixtures
SS Glass Strips, Stainless Steel screws, Corrosion and U.V. ray Resistant
MR coating, Acrylic diffuser. Out Door Light as Per Lustre item No. Li-5006/1WU. Nos. 3.00 6500.00 19500.00
A E-27 Lamp holders fitted in the Glass.Make Luster / Philips as per Interior
design.
m Supply, installation, testing & commissioning of Floor Lamp as per Lustre
item No. Li-4808 made of wooden and Stainless Steel. A E-27 Lamp Holder
MR Nos. 1.00 9500.00 9500.00
is fitted in the Table Lamp. Cloth shade is also Provided with the Table
Lamp.Make Luster / Philips as per Interior design.
q Supply, installation, testing and commissioning of Aviation obstruction light
with LED lamp, toughened clear glass, with all accessories as per standard
MR Nos. 4.00 4650.00 18600.00
item with all accessories.Make Luster / Philips as per Interior design.
Supply, Installation, Testing and Commissioning of AC 230/250 volts, 50 HZ
exhaust fan including providing nuts, bolts, mounting frame, Louvers
19 MR shutters and other accessories etc. Complete as per interior design
250 mm to 300mm sweep minimum1250 rpm (4-5 star) Nos 4.00 2450.00 9800.0
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5
star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of
insulation: B, 3-4 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle
kit, safety rope, copper winding, Power Factor not less than 0.9, Service
Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM
(tolerance as per IS : 374-2019), THD less than 10%, remote or electronic
20 MR regulator unit for speed control and all remaining accessories including safety Each 140.00 3250.00 455000.0
pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation
resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase
AC Supply, earthing etc. complete as required. 3 / 4 aluminium blade BLDC
ceiling fan BEE 5 Star Rating as per IS 374:2019, Service Value-7.10m3/ Min
(At turbo Speed)/ 28 to 31Watt full load power at turbo speed. 220m3/min air
delivery at turbo speed as per interior design
21 Supplying and fixing of GI box of following size modules, alongwith modular
base & cover plate for modular switches in recess etc as required.
21.1 OSR/1301 Modular G.l. box for 2 moudle 18 SWG Each 32 19.53 624.96
21.2 OSR/1302 Modular G.l. box for 4 moudle 18 SWG Each 20 25.61 512.2
21.3 OSR/1303 Modular G.l. box for 6 moudle 18 SWG Each 15 41.68 625.2
21.4 OSR/1304 Modular G.l. box for 8 moudle 18 SWG Each 10 46.88 468.8
21.5 OSR/1305 Modular G.l. box for 12 moudle 18 SWG Each 5 64.24 321.2
22 Supply and drawing of UTP 4 pair Cat 6 LAN cable in the existing
surface/recessed PVC conduit as required.
1.53.1 one run mtrs 50 49 2450.00
23 Supply & fixing of Faceplate for Flush / Surface Mount Information Outlets
Single Aperture with screw hole covers & Icon Tree Size 86mmX86mm 0.00
MR Single Aperture No 6 300 1800.00
24 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper
conductor PE insulated, shielded with fine tinned copper braid and protected
1.19 with PVC sheath in the existing surface/ recessed steel/ PVC conduit as mtrs 50 33 1650.00
required
25 Supplying and fixing following modular switch/ socket on the existing modular
plate & switch box including connections but excluding modular plate etc as
required.
1.24.7 TV antenna socket outlet No 2 119 238.00
TOTAL 77,36,902.22 2,552.36
3/3 Internal
BIRAJA GIRLS COLLEGE AT JAJPUR
External ELECTRICAL WORKS
SL.N SOR/ DSR AMOUNT NON AMOUNT
DESCRIPTION OF WORK UNIT QTY. RATE (RS)
O. 2018 SOR (RS) SOR (RS)
I MISCELLANEOUS ITEMS
1 15.4 Supplying, installation, testing & commissioning of Astronomical time switch of
following configuration to be mounted in feeder pillars / Lighting DBs for
automatic switching On & Off of street lights at sun set & sun rise or twilight
(Auto ON, Auto Off, Auto modes) with manual override facility with 12/24 hour
display format with suitable battery and indication for relay status i/c
programming at site complete as required.
1.1 15.4.3 3 output (1 output per phase) and suitable for three phase supply Each 2 8,831.00 17,662.00
2 5.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for
connections etc. as required.(Make-Obo/ Aps)
3 5.18 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop
earthing along with existing surface / recessed conduit / submain wiring / m 100 37.00 3,700.00
cable as required. (Make-Obo/ Aps)
4 MR Supply, installation, testing and commissioning of advance maintenance free
Chemical Gel GI Earthing of JK Chem rode copper of 3mtr long 50mm dia
CHEMRODE filled with highly conducting metallic compounds with the
permanent sealings at both the ends with compressed at the top along with 50
Kgs of RESLOW mixture of Resistance Lowering Grounding Minerals. The
loss on ignition by mass of the chemical compound shall be less than 22%. Nos 10 4500.00 45,000.00
The chemical compound should be tested and certified by any International
accredited and BIS (Bureau of Indian Standards) accredited laboratory. The
chemical earth electrode manufacturer shall be an ISO 9001:2015 & ISO
14001:2015 certified organization. The Earth pit should be covered with heavy
duty polyplastic weather proof chamber. Make-APS/ JK / OBO
TOTAL SUB HEAD (I) 86962.00
II SUB HEAD (II) :- L.T. PANEL AND DISTRIBUTION BOARD
M V SWITCHGEAR
1.00 MR Supply, Installation, Testing & Commissioning of External feeder Piller-1,
cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, free
standing, floor mounting, dust and vermin proof, powder coated, outdoor type,
compartmentalised, suitable for operation on 3 phase and neutral, 415 V,
50Hz AC system, including internal wiring with suitable size wires, rotary
handle, spreaders, 3mm thick gland plate, hinged type door with neoprene
gasket, IS 8623 etc. The panel shall include supply & installation of following
switchgears, metering instruments and accessories as per specification.
Incomer
250A FP 35kA MCCB with thermal magnetic release with adjustable OL, SC
and EF protection - 1 nos.
Busbar
1 Set of 300 A TPN busbars of high conductivity electrolytic quality Aluminium
alloy.
Instruments
2A, C curve SP MCB - 3 nos.
RYB indication lamp, LED type - 3 nos.
1 No 3 phase Digital Multi function meter to read V, A, F Acc class 1.
250/5A 5VA class 1 resin cast CT - 1 set
Outgoing.
100 A 4P 35kA MCCB, thermal magnetic having adjustable O/L, SC
protection - 4 nos.
Complete accessories as per above panel Nos 1 255215.00 255215.00
2.00 MR Supply, Installation, Testing & Commissioning of External feeder Piller-2,
cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, free
standing, floor mounting, dust and vermin proof, powder coated, outdoor type,
compartmentalised, suitable for operation on 3 phase and neutral, 415 V,
50Hz AC system, including internal wiring with suitable size wires, rotary
handle, spreaders, 3mm thick gland plate, hinged type door with neoprene
gasket, IS 8623 etc. The panel shall include supply & installation of following
switchgears, metering instruments and accessories as per specification.
Incomer
250A FP 35kA MCCB with thermal magnetic release with adjustable OL, SC
and EF protection - 1 nos.
Busbar
1 Set of 300 A TPN busbars of high conductivity electrolytic quality Aluminium
alloy.
Instruments
2A, C curve SP MCB - 3 nos.
RYB indication lamp, LED type - 3 nos.
1 No 3 phase Digital Multi function meter to read V, A, F Acc class 1.
250/5A 5VA class 1 resin cast CT - 1 set
Outgoing.
100 A 4P 35kA MCCB, thermal magnetic having adjustable O/L, SC
protection - 3 nos.
63 A 4P 35kA MCCB, thermal magnetic having adjustable O/L, SC protection
Complete accessories as per above panel Nos 1 235583.00 235583.00
4.00 MR Supply, Installation, Testing & Commissioning of EXTERNAL Street lighting
panel, cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, free
standing, floor mounting, dust and vermin proof, powder coated, outdoor type,
compartmentalised, suitable for operation on 3 phase and neutral, 415 V,
50Hz AC system, including internal wiring with suitable size wires, rotary
handle, spreaders, 3mm thick gland plate, hinged type door with neoprene
gasket, IS 8623 etc. The panel shall include supply & installation of following
switchgears, metering instruments and accessories as per specification.
Incomer
63A, TPN, switch disconnector unit (Isolator), AC23, 415V, 50Hz, complete
with handle assembly having door interlock - 1 no.
Busbar
1 Set of 100 A TPN busbars of high conductivity electrolytic quality Aluminium
alloy.
Instruments
2A, C curve SP MCB - 3 nos.
RYB indication lamp, LED type - 3 nos.
1 No 3 phase Digital Multi function meter to read V, A, F Acc class 1.
63/5A 5VA class 1 resin cast CT - 1 set
Outgoing.
40A TP+NL C curve MCB - 1 nos.
16A TP+NL C curve MCB - 6 nos.
Necessary space provision and control wiring for satisfactory operation of
Astronimical time switch for automatic switching ON & OFF of street lights. Nos 1 35500.00 35500.00
TOTAL SUB HEAD (II) NON D.S.R. ITEMS 526298.00
III SUB HEAD (III) :- CABLES AND CABLE TRAY
MR CABLES SUPPLY
1 Supply and laying of ISI marked aluminium conductor XLPE insulated cable
1 as per IS 7098, & cable, armoured, served, sheathed 1100 volts grade.
a) 10 sqmm 2 core M 1000.00 111.00 111000.00
b) 6 sqmm 4 core M 560.00 116.00 64960.00
c) 10 sqmm 4 core M 650.00 148.00 96200.00
d) 16 sqmm 4 core M 420.00 164.00 68880.00
e) 25 sqmm 3 1/2 core M 960.00 195.00 187200.00
f) 50 sqmm 3 1/2 core M 250.00 321.00 80250.00
g) 70 sqmm 3 1/2 core M 450.00 436.00 196200.00
h) 95 sqmm 3 1/2 core M 350.00 527.00 184450.00
i) 120 sqmm 3 1/2 core M 150.00 658.00 98700.00
TOTAL SUB HEAD (III) NON D.S.R. ITEMS 1087840.00
HV CABLE JOINTING & END TERMINATION
10.5.3 Supplying and making end termination with brass
compression gland and aluminium lugs for following size of
5 PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV grade as required.
6 4.6 Supply and installing following size of perforated hot dipped GI cable
trays(galvanisation thickness not less than 50 microns) with perforations not
more that 17.5% in convenient sections, jointed with connectors, suspended
from the ceiling with GI suspenders / fixed to walls with suitable GI clamps,
including bolts and nuts, bends, reducers, Tees, cross members etc as
required.
5.1 4.6.2 150 mm width x 50 mm depth x 1.6 mm thickness m 100 644.00 64,400.00
5.3 4.6.4 300 mm width x 50 mm depth x 1.6 mm thickness m 20 875.00 17,500.00
TOTAL SUB HEAD (III) 108837.00
IV SUB HEAD (IV) :- EXTERNAL LIGHTING
Supply and fixing of decorative streetlight pole shall be of
‘composite’ construction designed to withstand specified ‘dead
load’ pertaining to the luminaire and its mounting accessories
and ‘wind load’ corresponding to a basic wind speed of
169kmph without any deformation or damage to the structure.
The pole should be designed as per the stipulations of standard
EN40. The Pole Shaft should be fabricated out of Steel tube of
grade YSt 240 and batch test reports for chemical and
mechanical properties of material should be submitted along
with the bid. Structurally designed base plate of Steel A36/A572-
50 or equivalent should be welded with the pole shaft. The
welding shall be of high quality, carried out by qualified welders
using approved welding procedures and tested for its quality
through NDT method, such as DP Test. The pole shall be
provided with an opening at the bottom with removable cover
for providing connectors, MCB, etc. (to be supplied by others).
1 MR Each 16 19500.00 312000
Appropriate reinforcement shall be provided to compensate for
the loss of section at this point to ensure overall structural
stability of the pole under specified operating conditions. The
pole shaft structure shall be hot dip galvanized through single
dip process as per ASTM A123 and minimum average coating
shall not be less than 65 microns. No mechanical operation,
such as welding, drilling, etc. should be carried out on the pole
structure post hot dip galvanizing. Poles using pre galvanized
steel tubes or hot dip galvanized through double dip process
are not acceptable.Complete pole shall be treated with high
quality primer and thereafter coated with Polyurethane paint to
minimum average DFT of 70 microns. The painting shall be
carried out by experienced and trained technicians using
proven and established painting procedure. Only ‘controlled’
paint drying process shall be used to ensure proper adhesion
and finish of the paint.4 mt pole with base dia 140 mt upto 1mt
height and
Supply andrest 76 of
fixing mmsingle
with base plate 250*250
arm CASCADE *12 mm of pole
BRACKET
1000mm(l), 950mm (y). Design Standard EN40, Hot dip
galvanised to ASTM A123, with minimum average GI coating of
65μm, PU(Polyurethane) Painted with avg. DFT of 70μm, using
2 MR Each 5 2850.00 14250
very high quality paint & primer, Marine grade paint is available
at additional cost, Use KOC (Keselec Ordering Code) for
colour,texture & embellishment of brackets.
Supply and fixing of Double arm CASCADE BRACKET of pole
1000mm(l), 950mm (y). Design Standard EN40, Hot dip
galvanised to ASTM A123, with minimum average GI coating of
65μm, PU(Polyurethane) Painted with avg. DFT of 70μm, using
3 MR Each 10 4250.00 42500
very high quality paint & primer, Marine grade paint is available
at additional cost, Use KOC (Keselec Ordering Code) for
colour,texture & embellishment of brackets.
Supply & fixing of Decorative LED Up-Down Light, BIS certified
with a grey painted die casted aluminium body and a PC lens
sealed with the body to achieve complete IP66 protection and
making the luminaire suitable for outdoor use.
Surface-mounted luminaire for wall mounting.
The optics of the luminaire shall be designed for two-sided light
emission in both upward and downward directions. Design life
4 MR shall not be less than 30,000 burning hours. Each 16 2220.00 35520
Overall luminous efficiency of luminaire shall be 50 Lm/W ± 7%
at correlated colour temperature (CCT) of 3000K with tolerance
as per ANSI standard, colour rendering index (CRI) 80.
Electrical Class I, rated voltage 240Vac, Power Factor ≥ 0.50
for 2W and > 0.9 for 4W & 6W. Shall be supplied pre-cabled for
easy installation.
The product complies with the essential safety requirements of
Supply & fixing of Decorative LED Up-Down Light, BIS certified
with a grey painted die casted aluminium body and a PC lens
sealed with the body to achieve complete IP66 protection and
making the luminaire suitable for outdoor use.
Surface-mounted luminaire for wall mounting.
The optics of the luminaire shall be designed for two-sided light
emission in both upward and downward directions. Design life
5 MR shall not be less than 30,000 burning hours. Each 10 2960.00 29600
Overall luminous efficiency of luminaire shall be 50 Lm/W ± 7%
at correlated colour temperature (CCT) of 3000K with tolerance
as per ANSI standard, colour rendering index (CRI) 80.
Electrical Class I, rated voltage 240Vac, Power Factor ≥ 0.50
for 2W and > 0.9 for 4W & 6W. Shall be supplied pre-cabled for
easy installation.
The product complies with the essential safety requirements of
Supply & fixing of LED Spike Light, BIS certified with a grey
painted die casted aluminium body and a glass protector
tightened with the body to achieve IP66 protection and making
the luminaire suitable for outdoor use.
Available with a mounting bracket which makes it possible to
adjust and incline precisely on-site. It can be mounted on a wall
or on the ground with spike.
The optics of the luminaire shall be designed for efficient
symmetric light distribution. Design life shall not be less than
6 MR 30,000 burning hours. The light engine shall incorporate COB in Each 20 2220.00 44400
the Luminaires.
Overall luminous efficiency of luminaire shall be 70 Lm/W ± 7%
at correlated colour temperature (CCT) of 3000K with tolerance
as per ANSI standard, colour rendering index (CRI) 80.
Electrical Class I, rated voltage 240Vac, Power Factor ≥ 0.90
and THD < 15%. Shall be supplied pre-cabled for easy
installation. Kesslec PENZA - 12W
Supply and fixing of Bullet shaped LED Bollard, BIS certified
with a pressure die cast aluminium base and a protector made
of LDPE (Low Density Polyethylene) having separate IP66
optical & control gear compartments, impact resistance of IK10,
suitable for surface mounting.
Excellent photometry to maximise the spacing between the
bollards.
Suitable for on-ground mounting on 3xM10 bolts on 230mm
7 MR Each 10 21830.00 218300
System power of 15W, correlated colour temperature (CCT) of
4000K (optional 3000K & 5700K), colour rendering index (CRI)
>70 and L70 rated lifetime of 50,000 hours.
Electrical Class I, rated voltage 240Vac, Power Factor ≥ 0.95,
with BIS certified potted driver having internal surge protection
of 4/4 kV (in both Common & Differential Modes) and an
additional surge protection device (SPD) of 10/10 kV.Make-
Kesslec BULLET
Supply and fixing of LED Bollard, BIS certified with a cadmium
plated cylindrical steel pipe, permanently sealed optical block
(IP66) with aluminium heat sink and a diffused PMMA protector
Highly efficient symmetric light distribution providing excellent
photometry to maximise the spacing between the bollards.
Suitable for on-ground mounting on 4xM10 bolts on 180mm
8 MR System power of 10W and 18W, Correlated colour temperature Each 4 16920.00 67680
(CCT) of 4000K (optional 3000K & 5700K), colour rendering
index (CRI) >70 and L70 rated lifetime of 50,000 hours.
Electrical Class I, rated voltage 240Vac, Power Factor ≥ 0.95,
with BIS certified potted driver having internal surge protection
of 4/4 kV (in both Common & Differential Modes)..Make-
Kesslec VOI 18W 140 x 1000MM
TOTAL SUB HEAD (IV) NON D.S.R. ITEMS 764250.00
V SUB HEAD (V) :-PACKAGED SUB-STSTION
Supply, installtion, testing and commissioning of Outdoor
Packaged substaion with all necessary componetns like, 200
KVA 11KV/0.433 KV Dry Type TRANSFORMER, RMU (2nos. 630
Amp of LBS and 1no. 630A VCB) , LT ACB of 630 A TPN as
INCOMER & 6/8 Nos 250/200/100A TPN MCCB as OUTGOINGS,
in built in the enclsoure with 100 kvar (1 x 50 KVAR + 1 x 25
KVAR) capacitor panel. the technical specifications for the
enclsoure, mouting arrangments, fixing of the Component, HT
Gear, LT SwitchGear and Capacitor panel shall be specifications
attached and to be fully complied including civil pedestal.
Complete Package Substation including RMU, PSS enclosure and
LV switchgears shall be made/supply of same OEM. RMU (2no.s
630 Amp LBS and 1no. 630 A VCB) Short time current 21KA for 3
sec, Internal Arc 20 KA for 1 sec. Dry Type Transformer 200KVA,
1 MR 11KV/0.433KV with Off Circuit Tap Changer as per latest IS
Standard, 250 kVA continuous duty cycle, 11kV/433V, 3 phase,
50Hz, Dyn-11 vector group, step down, indoor type with IP23 or
better enclosure, copper wound, dry type - Resin Casted
transformer complete with off load tap changer & with all
accessories, including winding temperature scanner with alarm
and trip contact, fittings and conforming to specifications. Tap
changing range shall be , ±5% in steps of 2.5%. Transformer
shall have cable box for 11kV XPLE cable on HT side & Busduct /
Cable box on medium voltage side. Transformer shall meet
standard norms on NO LOAD & ON LOAD power losses.
Transformer should also have winding Temperature indicator. LT
ACB of 630 A TPN as INCOMER & 6/8 Nos 250/200/100A TPN
MCCB as OUTGOINGS, MCCB microprocessor type, Ics=Icu=100%,
50KA. Below mentioned Fire Suppression system also required with
Packaged subststion
Automatic Linear pneumatic Tube Detection based 4 Kg Novec 1230 System
with DLP valve, push in connector for tube, 4Kg Novec 1230/ FK5-1-2 gas,
mounting bracket, End of Line adopter and low pressure switch for monitoring
system activation, 10-25 Mtrs Linear pneumatic heat Detection Tube with all
necessary fittings & support and Master Control Unit with Audio Visual Alarm
with wiring to make complete system operational. The Control Panel should
have provision for integration with Fire Alarm/SCADA/BMS System. Makes :
Firetrex /SVS / RD Fire as approved by architect.
Packages Susbstion with Fire suppresion system above with comple as
required
TOTAL SUB HEAD (V) 1950000.00
TOTAL SUB HEAD (VI) 45,24,187.00 0.00
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
NIT_36.pdf
Tender Document
Tender drawing_36.pdf
Tender Document
Integrity Pact_36.pdf
Tender Document
Physical Milestone_ 36.pdf
Tender Document
Technical Specification_36.pdf
Tender Document
Soil Report _36_compressed.pdf
Tender Document
Approved Makes_36.pdf
Tender Document
GCC_2022.pdf
Tender Document
GCC Amedndment _01.pdf
Tender Document
Instruction to Bidder for online Bid Submission _33.pdf
Tender Document
Unconditional Acceptance_36.pdf
Tender Document
SCC_36.pdf
Tender Document
Revised BOQ_36.pdf
Tender Document
Revised Scope of Work_36.pdf
Tender Document
corrigendum-1521-NOTICE for Opening of Price Bid - NIT_36.pdf
pdf • 0.37 MB
corrigendum-1459-Corrigendum 01_36.pdf
pdf • 0.52 MB
addendum-561ed73ab941-Corrigendum 01_36.pdf
pdf • 0.52 MB
addendum-ea8f4bfb40ab-Corrigendum 01_36.pdf
pdf • 0.52 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .