28006/Engr/AMC/2023-24/01

Amount

SCHEDULE ‘A’ PART-I (AMC-AC)

The spares replaced under comprehensive maintenance shall be measured and paid OEM tax invoice if same company spare not avl in Market then spares will be paid on company invoice with 15% Contractor profit. (a) Compressor (b) Running Capacitor (c) Fan Capacitor (d) Fan Motor (e) Grill (F) Chasis (G) Remote (h) Brass Pipe (j) PCB Board (k) Thermostate (l) Drain Pipe (m) Pipe insulation (m) Power Cord (m) Air Filer (n) Wall Bracket (o) Condensor of out door Unit.

Installation of New split Air conditiner stand on wall, connect inlet AC assembly to Air conditioner , connect electricity supply to Air conditioner and making insect proof the wall hole with white cement and Check split AC functions after installation

Dismantle of AC stand from wall, Dismantly/Fixed Front air grill, disconnect electricity supply to Air conditioner and re-installtion split Air conditiner stand on wall, connect inlet AC assembly to Air conditioner , connect electricity supply to Air conditioner and making insect proof the wall hole with white cement and Check split AC functions after installation

Re-filling the AC Gas, first check the compressor, connect valve on the compressor process tube, fil Gas according to air conditioner check leakage after refill gas

SCHEDULE ‘A’ PART-II (AMC-RO)

Annual maintenance Contract for RO installed at HQ 28 Sector Assam Rifles Kakching alongwith its connected works with qtrly visting with following works - (a) Every Machine shall be serviced at least once every quarter. A record of such services duly acknowledged by the person using the machine or in his absence, in charge location of the RO shall be maintained. (b) Replacement of Filter Bag like paper filter bag & etc. (c) Replacement of RO Candle (d) Back wash & forward wash existing RO mainbran with chemicals (e) Replacement of RO Fitting as per requirements (f) Replacement of switch, socket & wiring as per requirements

The spares replaced under comprehensive maintenance shall be measured and paid OEM tax invoice if same company spare not avl in Market then spares will be paid on company invoice with 15% Contractor profit. (a) Compressor (b) Existing RO Mainbran (c) Existing RO Motor (d) Existing RO Fan Motor (e) Grill (f) Chassis (g) PCB Board

Installation of New RO with complete assessors with CPVC 50 mtr assorted size

Refitting of exiting RO with complete assessors with CPVC 50 mtr assorted size

SCHEDULE ‘A’ PART-III (AMC-Geyser)

Annual maintenance Contract for Geyser installed at HQ 28 Sector Assam Rifles Kakching alongwith its connected works with qtrly visting with following works - (a) Every Machine shall be serviced at least once every quarter. A record of such services duly acknowledged by the person using the machine or in his absence, in charge location of the Geyser shall be maintained. (b) Replacement of heating Element . (c) Replacement of indicator. (d) Replacement of Geyser fitting as per requirements. (e) Replacement of switch, socket & wiring as per requirements.

The spares replaced under comprehensive maintenance shall be measured and paid OEM tax invoice if same company spare not avl in Market then spares will be paid on company invoice with 15% Contractor profit. (a) Geyser with existing

Installation of New Geyser with complete assessors (SS Combine board 15 Ampr/5 Ampr , Connection pipe & plug 15 ampr/5 ampr with hot and cold pipe 6 mtr assorted size, chipping and plaster/ putty work with existing paint

Refitting of exiting geysers with complete assessors with hot and cold pipe 10 mtr assorted size (SS Combine board 15 Ampr/5 Ampr , Connection pipe & plug 15 ampr/5 ampr with hot and cold pipe 6 mtr assorted size, chipping and plaster/ putty work with existing paint

SCHEDULE ‘A’ PART-IV (AMC-Desert Coolers)

Annual maintenance Contract for Desert Coolers installed at HQ 28 Sector Assam Rifles Kakching alongwith its connected works with qtrly visting with following works - (a) Every Machine shall be serviced at least once every quarter. A record of such services duly acknowledged by the person using the machine or in his absence, in charge location of the Geyser shall be maintained. (b) Replacement of existing fan . (c) Replacement of indicator. (d) Replacement of Desert Coolers fitting as per requirements. (e) Replacement of drain pipe switch, socket & wiring as per requirements. (f) Replacement /repair of fan motor/ pump with connection pipe

The spares replaced under comprehensive maintenance shall be measured and paid OEM tax invoice if same company spare not avl in Market then spares will be paid on company invoice with 15% Contractor profit. (a) Desert Coolers body with existing fitting

Installation of New Desert Coolers with complete assessors (SS Combine board 15 Ampr/5 Ampr , Connection pipe & plug 15 ampr/5 ampr with drain pipe 6 mtr assorted size, chipping and plaster/ putty work with existing paint

Refitting of exiting Desert Coolers with complete assessors with hot and cold pipe 10 mtr assorted size (SS Combine board 15 Ampr/5 Ampr , Connection pipe & plug 15 ampr/5 ampr with drain pipe 6 mtr assorted size, chipping and plaster/ putty work with existing paint

M/S YUMNAM PREMKUMAR SINGH

M/S YUMNAM IMOCHOUBA SINGH