SPL REPAIR / RENOVATION AT KV NO. 2 AT AF STN ADAMPUR

Amount

Brick work with pulverized fuel ash lime old size bricks, straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified .

Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame, complete all as specified.

Factory made solid PVC Door frame of size 50mm x 47mm made out of 5mm plain PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening, complete all as specified.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sq.m each and removing from site complete all as specified.

Aluminium anodized, barrel tower bolt, 150 mm long, complete all as specified.

Aluminium anodized, 100mm long butt hinges with galvanised mid steel screws complete all as specified.

Aluminium anodized handle, 150 mm long, cast type, ISI marked complete all as specified.

PCC type B-0 (1:2:4), using 12.5 mm graded stone aggregates as in coping & coving etc., complete all as specified.

PCC type E-2 (1:5:10), using 40 mm graded stone aggregates as in filling & mass concrete or sub base etc., complete all as specified.

75 mm thick, cement concrete type D-2, (1:4:8) using 40 mm graded stone aggregate, finished even & rough, as in sub floors, complete all as specified.

Machine cut Kota stone slab flooring 18-22 mm thick, area of each slab not less than 0.30 Sq.m, (cut to size in square shape) laid over & including 15 mm thick (average thickness) cement mortar (1:4) screed and jointed with grey cement slurry mixed with matching shade pigment including rubbing and polishing (Granite finish) complete, all as specified.

Pre-polished Granite (Jet black shade) slabs, 18-20 mm thick, machine cut, over cooking platform and like, single piece, (cut to size in rectangular/square shape) laid over & including 15 mm thick (average thickness) cement mortar (1:4) screed and bedded, jointed with grey cement slurry & pointed with grout of matching shade, complete all as specified.

Rounding of / moulding to edges (half round) of stone of any description including rubbing and polishing (Granite finish), complete all as specified.

First quality, glazed ceramic, colored 6-7 mm thick tiles of size exceeding 0.13 sq.m but not exceeding 0.16 Sq.m each on vertical surfaces such as dados etc over & including 10 mm thick cement mortar (1:4) screed, set and jointed with grey cement slurry and pointed in grout of matching shade of tiles, complete, all as specified.

First quality, non-skid ceramic, straight cut/joint free, 7-8 mm thick colored tiles, area of each tile exceeding 0.11 sq.m but not exceeding 0.18 Sq.m, in floors etc. over & including 15 mm thick cement mortar (1:4) screed, set and jointed with grey cement slurry & pointed with grout of matching shade, complete, all as specified.

First quality, non-skid ceramic, straight cut/joint free, 7-8 mm thick colored tiles, area of each tile exceeding 0.18 sq.m but not exceeding 0.38 Sq.m, in floors etc. over & including 15 mm thick cement mortar (1:4) screed, set and jointed with grey cement slurry & pointed with grout of matching shade, complete, all as specified.

Factory made, machine pressed precast concrete interlocking paver block any shape and size approved by EIC, ISI marked (IS:15658-2006) of 80 mm thick, M-40 grade (Medium Traffic), laid dry over 25 mm thick (Compact thickness) sand filling including necessary watering & consolidation, complete all as specified.

Water proofiting treatment RCC slab & vertical sides of sunken portion comprising the following: -

Rendering 15mm thick in cement mortar (1:3) mixed with water proofing compound finished even & smooth on top complete all as specified. NOTE: (i) The sunken portion will be tested against leakage seppage by ponding water for at least 72 hours) (ii) Cost of water proofing compound @ 2% by weight of cement is included in this item.

Laying LDPE sheet 150 micron thick after applying a tack coat of industrial bitumen 85/ 25 @ 1.2 kg/ Sq. m over plastered surface, complete all as specified.

Rendering 10mm thick on brick work or concrete surface in cement mortar (1:4) finished even and smooth without using extra cement, complete all as specified.

Applying three coats of white wash including preparing newly plastered wall surfaces, complete all as specified.

Applying three coats of white wash including complete removal of existing treatment of any description on old wall surfaces of any description & prepration of surfaces, complete all as specified.

Complete removal of existing treatment of any description on old wall surfaces of any description, prepration of surfaces complete all as specified and applying the following: - (a) Applying wall care putty, in two coats on wall surfaces & smoothening the surfaces with sand papers etc., (preparatory to paint as directed), complete all as specified. (b) Two coats of oil bound distemper over and including a coat of cement primer, complete all as specified.

Steel tubes 15 mm bore ‘medium grade’, galvanized with all fittings and fixed to walls and ceilings or laid in floors, including taking up or down existing unserviceable steel tubing and connections, complete all as specified.

Steel tubes 40 mm bore ‘light grade’, galvanized with all fittings and fixed in pieces as spout and waste pipe, complete all as specified.

Bib tap, cast copper alloy, chromium plated fancy type, long body with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIR, complete all as specified.

Angular stop valve/cock, cast copper alloy, chromium plated, with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIR, complete all as specified.

Centre hole fancy mixer for mixing hot & cold water for wash hand basin, cast copper alloy, with dual capstan heads, chromium plated, screwed down high pressure, with lettered 'Hot' & 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe suitable for 15mm bore, IN REPAIR complete all as specified.

Cast copper alloy, chromium plated towel rail, 600mm size & dia of tube not less than 20 mm, IN REPAIR, complete.

Chromium plated grating 125mm dia circular of approved make and fixing with white cement on nahani trap or floor trap complete, all as specified

75mm external dia, uPVC pipes, Type 'B' ISI marked single socketed in any length with rubber ring joints, jointed with solvent fixed to walls or laid in floors complete all as specified

110mm external dia, uPVC pipes, Type 'B' ISI marked single socketed in any length with rubber ring joints, jointed with solvent fixed to walls or laid in floors complete all as specified

uPVC bend suitable for 75mm external dia uPVC pipes, any redius, complete all as specified

uPVC bend suitable for 110 mm external dia uPVC pipes, any redius, complete all as specified

75mm external dia uPVC , Type 'B' ISI marked, floor trap of outlet plain with grating including jointing with solvent cement complete all as specified

110mm external dia uPVC , Type 'B' ISI marked, gully trap outlet plain with grating including jointing with solvent cement complete all as specified

Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe), IN REPAIR, complete all as specified.

PVC flushing cistern 10 litre capacity, syphonic action type, any shade, dual flush, ISI marked (IS: 7231) with flush pipe and all fixing arrangements, IN REPAIR, complete all as specified.

Vitreous China wash basin, white, flat back, size 550 x 400 mm with padestal, including fixing acessories like galvanised brackets & rag bolts, with cast copper alloy, chromium plated waste coupling half or full threaded suitable for & including 32 mm size PVC discharge pipe, IN REPAIR, complete.

PVC connections 15 mm size of length 600 mm with PTMT nuts, IN REPAIR, complete all as specified.

Vitreous China Urinal, half stall type, white, with and including all fixing acessories IN REPAIR, with cast copper alloy, chromium plated waste coupling half or full threaded suitable for & including 32 mm size PVC discharge pipe, complete all as specified.

Demolitions floor hearth or wall tiling including cement mortar bedding removing serviceable tiles to store and rubbish off the premises, complete all as specified.

Demolition of stone slabs and stone tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar complete all as specified.

Demolition of brickwork built in cement mortar including all quoins, arches, pillars complete etc all as specified.

Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified.

Note : Amount of credit for retrieved materials is mentioned in tender documents in pdf form which will be deducted while acceptance of tender offline.

B S ENTERPRISES

M/s Sahib and Company

JAI DURGA CONSTRUCTION COMPANY

LABH SINGH AND SONS