SPECIAL REPAIRS TO 04 WASH ROOMS IN BUILDING NO P 1 OF F COMBAT AT CME

Amount

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal of debris out of MD land complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing coat) removing serviceable tiles to store and removal of rubbish out side MD land complete all as specified and as directed.

M & L for 75mm thick cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed.

M & L for coloured joint free non-skid ceramic tiles of 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including laid over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

M & L for glazed coloured ceramic tiles of size 350x250x7mm /450x350x7mm thick of colour and pattern as approved by GE in vertical surfaces etc fixed and jointed in neat cement slurry and pointed in coloured cement to match complete, over and including 10mm thick backing coat in cement mortar (1:4) including triangular filleting on top in cement mortar (1:4) complete all as specified and as directed.

S & F under counter wash hand basin vitreous china coloured including CI bracket, 15mm dia polythene connection, 32mm dia chromium plated (CP) waste coupling, chain and plug waste fitting union and 32mm dia PVC waste pipe 90cm long etc. complete all as specified, and all necessary inlet outlet connections complete all as specified and directed. Make - Hindware Cat No. 10065 or equivalent approved make indicated in list of makes in tender.

S & F in repair 15 mm dia pillar tap, cast copper alloy, with capstan head, chromium plated fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long shanks and flynuts, screwed for iron pipe complete all as specified and directed. Make- Jaquar, Code No DRC-37001 or equivalent model in Marc/ ESS-ESS as approved by GE.

S & F in repair 15 mm dia angle cock, with capstan head, brass chromium plated fancy type, screwed down high pressure, with wall flange, long shanks and flynuts, screwed for iron pipe complete all as specified and directed. Make- Jaquar, Code No CON-059KN or equivalent model in Marc/ ESS-ESS as approved by GE.

S & F vitreous china half stall type urinal ,of size 720 x 485 x310 mm white with grating and union for discharge pipe (excluding flushing Cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal backing cement including connections complete all as specified and directed.

S & F CP Urinal spreader, brass CP, back inlet 75mm , tail slab fixing with 15mm bore pipe complete all as specified and directed. Make : Jaquar Code No ALD CHR 1041 or equivalent model in Marc/ ESS-ESS as approved by GE.

M & L for 15mm concussive push button taps of cast copper alloy, screwed for iron pipe and fixed complete all as specified and directed.

S & F 12mm thick, clear, toughened glass including rounding/moulding chamfering edges as in partions including necessary fixing clips complete all as specified and directed.

S&F in repair, vitreous china wash down water closet pan, (EWC) pedestal pattern, coloured including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinges devices including PVC low level flushing cistern 10 Litre capacity with all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.Make- Hindware, cat No 20044 or equivalent model in Parry Ware (Super fine)/ Neyveli Ceramics (Neycer) (1st quality) as approved by GE.

S & F brass CP health faucet for EWC 15 mm bore, including one metre length PVC barbed flexible pipe with steel casing and hook fixed to wall etc complete as specified and directed by Engineer-in-charge. Make : Jaquar CAT No 563 or equivalent model in Marc/ ESS-ESS as approved by GE.

S & F brass CP toilet paper holder with flap fixed to wall with chromium plated brass screws complete all as specified. Make : Jaquar CAT No ACN-1153 N or equivalent model in Marc/ ESS-ESS as approved by GE.

S & F in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed by Engineer-in-charge.

S & F brass chromium plated single towel rail, 60 cm long between flanges complete all as specified and directed by Engineer-in-charge. Make : Jaquar CAT No CAN-1111 NM or equivalent model in Marc/ ESS-ESS as approved by GE.

S & F 15 mm bore bib tap, brass chromium plated with wall flange, fancy type with long shank and crutch handle, screwed down, screwed for iron pipe complete all as specified. Make : Jaquar CAT No CON-047 KN or equivalent model in Marc/ ESS-ESS as approved by GE.

S & F 15 mm bore two way angle cock, with capstan head, brass chromium plated fancy type, screwed down high pressure, with wall flange, long shanks and flynuts, screwed for iron pipe complete all as specified and directed. Make- Jaquar CAT No CON-059K or equivalent model in Marc/ ESS-ESS as approved by GE.

S & F brass CP soap dispenser with glass bottle, screwed down , with wall flange fixed to wall complete all as specified and directed. Make- Jaquar CAT No ACN-1135 or equivalent model in Marc/ ESS-ESS as approved by GE.

S & F and testing GI tubing of size 15mm bore, medium grade with and including all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc laid in floors /walls//ceiling and including clips, wall hooks etc,complete and making necessary connection and testing on completion complete all as specified and directed

Refixing of old steel tubing of size 15mm bore of pipe and including with new all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc in (wall/floor/ ceilings etc) complete all as specified & directed. (Note:-Old pipes as retrieved from respective item herein before in good condition shall be used)

S & F and testing GI tubing of size 20mm bore 'medium grade' with and including all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc laid in floors /walls /ceiling and including clips, wall hooks etc,complete and making necessary connection and testing on completion complete all as specified and directed

Refixing of old steel tubing of size 20mm bore of pipe and including with new all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc in (wall/floor/ ceilings etc) complete all as specified & directed. (Note:-Old pipes as retrieved from respective item herein before in good condition shall be used)

Supply and fix PVC (SWR) pipe 75mm bore single socketed with rubber ring joints/ adhesive fixed to walls with PVC clamps / laid in trenches or in floors complete all as specified and as directed.

Supply and fix PVC (SWR) pipe 100mm bore single socketed with rubber ring joints/ adhesive fixed to walls with PVC clamps / laid in trenches or in floors complete all as specified and as directed.

S & F 75 mm bore PVC (SWR) bend any radius, with oval access door fixed with rubber ring joints to pipe complete all as specified and as directed.

S & F 75 mm bore PVC (SWR) junction single (single T) with oval access door fixed with rubber ring joints to pipe complete all as specified and as directed.

S & F 75mm dia of outlet PVC (SWR) floor trap, plain with grating including jointing with solvant cement including necessary PCC & form work as required complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm but n exc 4.0 Sqm each complete all as specified and as directed.

S & F aluminium colour powder coated door with frame and shutters, made out of extruded anodised extruded aluminum section conforming and as specified in IS-737, single or double leaf, partly glazed and partly prelaminated particle board exterior grade including aluminium glazed beading, rubber packing , comprising of following : 1) Aluminium colour anodised door frame section 101.6x44.45x1.93mm. 2) Aluminium colour anodised vertical section in shutter 85x44.45x2mm. 3) Aluminium colour anodised top and style shutter section 95.25x44.45x2mm. 4) Aluminium colour anodised handle 2nos in each shutter 200mm long. 5) Aluminium colour anodised middle lock rail/bottom rail section 150x44.45x2.65mm, Jindal cat no 20002 6) Floor spring 2 Nos 7) 6 lever mortice lock brass, Godrej make or equivalent approved. 8) 12mm thick prelaminated particle board (both side) exterior grade ISI marked. 9) 5mm thick plain or coloured glass. fixed with and including anodised aluminium butt hinges, tower bolt, glazing clips and locking arrangements, snap beading, handles and 5 mm thick plain sheet glass and connected items, with and including making good to the disturbed portion with its original specifications fixed as in repairs, complete all as specified and directed. (Note :- Minimum thickness of anodizing shall be 25 micron.)

S & F solid PVC door frame (confirming to IS) of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube,fixing in opening complete all as specified & directed.

S & F factory made solid PVC moulded door shutter, 30 mm thick 2mm thick 3D wood grain Moulded PVC sheet polyurethane painted on the front face & 2mm plain colour PVC sheet on back face complete all as specified and as directed.

S & F 100mm size, butt hinges, ISI marked, extruded aluminium aloy with galvanised mild steel hinge pin anodised, type B-21 complete all as specified and as directed.

S & F aluminium anodised barrel tower bolts of extruded section, 125 mm length, ISI marked complete all as specified and as directed.

S & F extruded aluminium alloy handles, fabricated type, anodised 150 mm size, ISI marked complete all as specified and as directed.

S & F in repairs 2000 ltr capacity PVC loft water storage tanks ISI marked hoisted and fixed in position all as specified in SSR Part I including provision of 20mm bore ball brass valve high pressure with polythelene float, aluminium rod and fly nut all as specified.

M & L for 40 mm thick PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in sub base, finished fair and even complete all as specified and as directed.

M & L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning of surface complete all as specified and directred.

M & L for polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sq.m complete all as specified and as directed.

M & L for PCC (1:5:10) type E2 using (40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

M & L for 18 mm to 20 mm thick Granite (of any type work) (table rubbed and polished) in steps, jambs, pillars, window cill, cooking platform, both side polished including necessary cutting, rounding exposed edges fixed in walls and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M & L for machine cut cudappah stone slab 20-25mm thick laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary cutting, rubbing and polishing complete all as specfied and as directed.

Cutting chases, pining in, making good to facings where required & pointing in cement mortar (1:3) to ends etc or edges of landings, steps cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing and making good, cutting n.exc. 10cm girth in brick/stone/concrete block walls all as directed.

Demolition of brick work or stone / boulder masonery built in cement mortar complete all as specified including coping complete all as specified and directed by Engineer-in Charge.

M & L for block masonry with solid block of precast cement concrete class designation C-5 (using 20mm graded stone aggregate), exc 10cm in width and setting in cement mortar (1:6) complete all as specified and as directed.

M & L for 10mm thick cement plastering on fair faces of brick masonry/ concrete surfaces in CM (1:6) finishing surfaces even and fair without using extra cement complete all as specified and as directed.

M & L for 15mm thick cement plastering on stone masonry/ other tan fair surfaces in CM (1:6) finishing surfaces even and fair without using extra cement over and including 10mm thick dubbing out on irregular face of wall in CM (1:4) including taking down plastering of any description, raking out joints, hacking for key, scrubbing down with water complete all as specified.

M & L for preparation of newly plastered or unplastered surfaces on walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M & L for preparing old plastered surfaces and applying two coats of white wash on celing complete all as specified and directed.

M & L for preparing old plastered surfaces and applying two coats of oil bound distemper on walls complete all as specified and directed.

M & L for 18/19 mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, and fixed to timber framework with screws including taking down existing board of any description complete all as specified and directed.

M & L for cover fillet (lipping) of tempered hard board 40mm wide, 6mm thick and fixing with screw complete all as specified and directed.

M & L for PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in copings, bed plates, fixing of hold fasts and other similar works and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of necessary form work complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation boards / slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

M & L for false ceiling with 4mm thick designer 'E' board fixed on GI grid work with powder coated finish on exposed surface of size 0.6 x 0.6m consisting of GI angle supported on wall of size 24mm x 28 x 0.7mm main tee of size 24mm x38mm x 0.7mm, cross tee of size 24mm x 28mm x 0.7 mm using porpose made members interlocking to each other and 40mm x 3mm flat GI mild steel strip suspender made to shape at 1200mm c/c fixed with 3mm dia GI wire and making holes etc all as directed including two coats of white wash on ceiling after preparation of surfaces and as per manufacture instruction make of GI Grid work : Armstrong/Swastik/Techno Grid and Make E board Gypsum or equivalent approved .

S & F stainless steel automatic hand dryer size 235x205x265mm fixed to wall complete all as specified and directed. Make Cera Cat No B2220101 or equivalent approved make indicated in list of makes in tender.

S & F vitreous china urinal Ivory colour, with Integrated EFS Calcia EFS size (360x330x740mm) with grating and union for discharge pipe (excluding flushing Cistern, flush pipe and waste pipe), including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal backing cement including making connections complete all as specified and directed. Make Cera Cat No S4010101 or equivalent approved make indicated in list of makes in tender.

S & F vitreous china wall hung EWC Ivory colour, size 565x350x350mm, including matching colour closed pattern flat bottom soft close cover with mild steel chromium plated hinging device, fixed on wall, including providing and fixing plugs, bedding against wall in cement mortar (1:2), securing EWC to plugs with and including 60mm long brass screws, pointing around EWC using coloured cement including making connections complete all as specified and directed. Make: Cera, Cat No S1043119 (P Trap) or equivalent approved make indicated in list of makes in tender.

S & F wall mounted, twin flush, concealed flushing cistern, white (without knob and frame) of size (550 x 95 x 500 mm) fixed to full frame mounted on wall, including bedding against wall in cement mortar (1:2), making connections complete all as specified and directed. Make Cera Siamp (without knob and frame) Cat No B1110108 or equivalent approved indicated in list of makes in tender.

S & F globe knob shine finish, push type for flushing cisterns including making connections complete all as specified and directed. Make Cera Cat No B1120119 or equivalent approved make indicated in list of makes in tender.

S & F full frame for wall hung concealed flushing cistern fixed to wall using rag bolts complete all as specified and directed. Make Cera Siamp Cat No B1130105 or equivalent approved make indicated in list of makes in tender.

S & F wall mounted, grab bar 600mm long fixed to wall using bolts complete all as specified and directed. Make Cera Cat No B2210106 or equivalent approved make indicated in list of makes in tender.

M & L for point wiring of any length using approved colour coding as per IS, with stranded copper conductor 1.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade, IS - 694 marked in FRLS and including heavy duty, PVC casing caping with including all accessories etc.,heavy duty ISI marked, including PVC box surface/flush type with PVC sheet for mounting fittings such as switches sockets fan regulators etc including PVC insulated stranded copper conductor 1.5 Sq.mm (nominal area) single core cable as earth and connecting to earth dolly complete and and all as specified for the following:-

(a) One light/fan/socket or power point controlled by one way switch 5 Amps

(b) One multi 5 pin 5 amps Socket outlet point controlled by one switch on same board.

(c) One multi 5 pin 5 amps Socket outlet point controlled by one switch on independent board.

M & L for point wiring of any length using approved colour coding as per IS, with stranded copper conductor 2.5 Sq.mm(Nominal area),single core,PVC insulated and unsheathed stranded cable 1100 volts grade,ISI - 694 FRLS marked the PVC casing caping with including all accessories etc.,heavy duty ISI marked,including modular white cover plate with frame and including including PVC box surface/flush type with PVC sheet for mounting fittings of suitable size as per site requirement for housing switch ,socket,regulators etc,including PVC insulated stranded copper conductor 2.5 Sq.mm (nominal area) single core cable as earth and connecting to earth dolly complete and including cutting chases in the wall for box including making good of disturbed surface and all as specified for 16 Amps socket outlet on independent board.complete all as specified and as directed.

Disconnecting and taking down the existing Exhaust fan of any size and refixing same after cleaning and servicing and overhauling of exhaust fan complete all as specified and as directed.

S & F Switch piano, flush type single pole, one way 5 Amp 250 volts,complete all as specified and directed

S & F ceiling rose on PVC square blocks surface bakelite 3 terminal. complete all as specified and directed

S & F socket outlet flush type, 5 pin 6 amps/16 amps, multi purpose, 230 volts, single pole , suitable for 2 in 1, 3 pin, 5 and 15 amp flush type complete all as specified and directed.

S & F 5 pin switch socket combination flush type 5 pin 5 amps. complete all as specified and directed.

S & F decorative ultra slim square profile linear 12W LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient, 230V complete all as specified and directed.

S & F LED tube light fitting, recess mounting LED 2x2 luminarie 36W, LED edge lit luminarie aesthetically designed flat panel which provide soft light and free symmetrical illumination suitable for flushing into false ceiling etc, prewired and all accessories complete all as specified and as directed Make :-Havells Cat part No LHEEBP6CUL1W036 or equivalent make Philips, Wipro complete as specified and directed by Engr-in-Charge.

S & F by flushing to walls MCB distribution board double door 240 volts 4 way with 200 amps rated bus bar , IP 43 complete all as specified and as directed

S & F MCB SPN 40 amps, 10 kA, 230 V AC, C series complete all as specified and as directed

S & F MCB SP 6 to 32 amps, 10 kA, 230 V AC, C series complete all as specified and as directed

M & L for sub main wiring complete with two single core 4.0 Sqmm (FRLS) PVC insulated, unsheathed multi stranded copper conductor cable, 1100 volts, grade FRLS drawn into and including electrical grade PVC casing caping 25mm wide of desired colour not less than 1.2mm thick and 25mm dia and, continuous PVC insulated copper earth wire 4.0 Sqmm complete fixed on the surface of wall/roof etc complete all as specified and as directed. (Note :- 2 runs of 4.0 Sqmm conductor, PVC casing caping and one run of 4.0 Sqmm earth wire shall be measured as one unit length.)

Taking down aluminium point wiring( light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants holder,regulators sockets, light fitting etc removing materials deposited to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.as per engr-in-charge.

Decent Decorators