SPECIAL REPAIR TO ROAD NEAR DBN URC and CERTAIN INSTALLATION UNDER AGE BR II AT TMS UNDER GE GURDASPUR

Amount

Scarifying or picking gravelled macadam or bituminous macadam surfaces in area not exc 400 Sqm (exc 50 mm deep but not exc.100mm deep) including raking over and the surface and edges to proper required gradient and camber including removing the unserviceable material to a distance not exc 50 metres away and stacking serviceable material for reuse complete all as specified and directed

Material and labour 7.5cm thick (compacted thickness) WBM with coarse aggregates of (Granite, trap or Basalt stone) of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber with 8 to 10 Tonne power road roller complete all as specified and directed

All as per item No 2 here in before but exept matarial

Material and labour for preparing unsurfaced water bound macadam surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with air compressor to remove all loose dirt etc and applying evenly a priming/tack coat with paving bitumen at the rate of 10 kgs per 10 Square metre of road surface, laying rolling consolidating bituminous premixed carpet 40mm thick (minimum consolidated thickness) using 5.50 % binder paving VG 30 Content by weight of total mix laying and spreading mechanical paver rolled and compacted to required gradient with 8 to 12 ton power roller complete all as specified and directed.

Material and labour for preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags/air compressor to remove all loose dirt etc and applying evenly a priming/track coat with bituminous primer VG-10 @ 5kg per 10 Sqm and laying bituminous Premixed semi dense asphaltic concrete 30mm thick (minimum consolidated thickness) with minimum 5.5% binder content paving bitumen VG-30 by weight of total mix rolled and compacted with 8 to 10 Tonne power road roller to required gradient and camber complete all as specified Note : (a) Material for SDAC shall be mixed in hot mixing plant. (b) The bitumen content used shall be as per aprooved design mix. (c) Mix design of bitumenous SDAC will be got done from approved Lab and aprooved by GE before execution. (d) The pemix carpet shall be laid with machenical paver.

Repair to pot holes of depth, exc 30mm area not exc 1.0sqm each including sweeping free from dust and mud or water scoring sunken surfaces in roads, paths etc cutting around edges to at least 30mm in depth and making good by applying tack coat with paving bitumen @ 5Kg per 10 Sqm, putting in premixed bituminous macadam well rammed and sealed with binder @ 9.8Kg per 10 Sqm, blinded with 0.09 cum of stone chippings 6.3mm size and again well rammed to true surface (including supply of premix macadam binder and chipping to uniform surface) depth of pot holes not exc 30mm complete all as specified and directed. Note : (a) Material for premixed bituminous macadam shall be mixed in hot mixing plant.

Supply and fixing in repair for road solar stud size 125x125x25mm made from aluminium alloy and PC construction, solar powered by monocrystel solar panel alongwith high capacity rechargable battery (led - 10mm, 3 pieces each side and total 6 pieces are used for high brightness) water proof confirming to IS-67-1977 having load capacity of 40 tonnes complete all as specified and directed.

Material and Labour for marking lines dashes, arrows, letters etc on road pavement and the like of any width with using thermoplastic compound white paint hot applied 1.25 mm thick including glass with machine confirming to BS3262 and according to the specification laid down IRC & MOST (Ministry of Surface Transport) specification 20011(4th revision) complete all as specified. Note:- Marking shall be carried out with thermostat machine

Surface excavation n exc 30 cm deep and averaging 15 cm in deep and getting out in soft loose soil complete all as specified and directed.

M & L Hard core of broken stones gauge n.exc 63 mm deposited spread and levelled in layers n.exc 15 cm thick watered and rammed to a true surface

Material and Labour 75 mm thick PCC 1:4:8 type D2 using 40 graded stone aggregate as in sub base and finishing the surface even & rough to receive floor finish complete all as specified.

Material and Labour 100 mm cement concrete type D2 using 40 graded stone aggregate as in sub base and finishing the surface even & rough to receive floor finish complete all as specified.

Material and Labour 40 mm thick PCC 1:2:4 type B1 using 20 graded stone aggregate as in flooring and finishing the surface fair & even without using extra cement complete all as specified.

Material and labour machine pressed precast concrete interlocking coloured paver Block any shape and size, ISI marked, 80mm thick ,M-80 grade with grey cement and pigment over and including 25mm thick sand cushion complete all as specified.

Material and labour in for road delineator ABS round body, round body fitted with 2 nos 100mm dia reflective reflectors (Amber/Red colour) and mounted on MS pipe 50mm dia duly powder coated overall length 850mm fitted with anti rust and theft steel net including welding of mild steel flat iron at bottom of delineator of size 200x80mm complete all as specifed and directed

Material and labour for continuous brick edging, with width equal to the width of the brick laid dry on end vertically with burnt clay bricks of sub class 'B' (old size bircks) including necessary excavation ,embedding bricks in the ground , tamping ground around bricks, removing any surplus spoil and dismantling of existing brick edging etc complete all as specified and directed

Demolition of cement concrete in ground floor and paving not exc 15 cm thick ( below or above ground level) and disposal of unserviceable materials, debris and rubish to a distance not exc 500m as directed by Engr-in-Charge complete all as specified.

Santokh Singh and Associates

GORAYA AND CO

Harbhajan electric co