New Installation of Belt Conveyor structure and Drive head in 6D and 9WL of RIV seam at Khottadih Colliery.

Amount

Installation of belt conveyor structure in 6 no. 4th belt of RIV seam of Khottadih Colliery. (Inclusive of EPF/CMPF)

Complete Installation after Transportation & with Necessary Fabrication of140 mtrs 1000 mm width, belt conveyor structure in 6 dip from 37L to 41L which includes 3) Transportation, Carrying from Surface & Fitting 1 nos. of load table one for Discharge & 2nd for Tail End& decking plate – 1.5 MT. 4) Transportation & Fitting including grouting of Tail end Assembly with V-Scraper & Decking fabrication & Fitting - 1 MT 5) Fitting Complete 140 mtr Structure with Top & Bottom Rollers after transported from surface to work site laying ,and, fitting @ -68Kg-per-mtr,

Fabrication of One no of hopper 04 mtrs long which including labour cost, oxygen, DA and welding

Fabrication of one no. of heavy duty tail-end assembly which including labour cost, oxygen, DA and welding

1000 mm PVC Belting transportation from surface, laying, jointing tensioning trail run etc.

4 times belt shifting (09 hole in each shift)

4 times belt extension including Tail End Assembly and hopper Shifting - 14 hds. x 1.5 shifts = 21 hds. for one extension

Fencing of Drive Head, Loop Take Up and Tail End (Tail end fencing 16 times)

Consumable Nut & Bolt 1/2” X 11/2” – 65 Kg, , Plain washer- 05 Kg,

Fabriation of complete drive head including gear and motor base frame

Installation of new 350mtr long 1000mm belt conveyor at 9WL in RIV seam for development in Khottadih Colliery. (Inclusive of EPF/CMPF)

Complete Installation after Transportation & with Necessary Fabrication of 350 mtr long 1000mm with belt conveyor 9WL in RIV seam which includes 1) Transportation, Carrying from Surface & Fitting of Discharge Head (800 X1150 mm) with Deck Plate, Chute, scrapper and 08 nos of Girders (125 X 250 mm) - 3.0 MT 2) Transportation, Carrying from Surface & Fitting of Drive head with Gear Box & Motor – 7.5 MT 3) Transportation, Carrying from Surface & Fitting 1 nos. of load table one for Discharge & 2nd for Tail End& decking plate – 3 MT. 4) Transportation & Fitting including grouting of Tail end Assembly with V-Scraper & Decking fabrication & Fitting - 1 MT 5) Transportation, Carrying from Surface & Fitting Loop take up assembly with heavy duty mechanical Winch. & Bend Pulley frame - 3.0 MT, 6) Fitting Complete 450 mtr Structure with Top & Bottom Rollers after transported from surface to work site laying ,and, fitting @ -110Kg-per-mtr, - 38.5MT

Fabrication of One no of hopper 04 mtrs long which including labour cost, oxygen, DA and welding

Fabrication of one no. of heavy duty tail-end assembly which including labour cost, oxygen, DA and welding

Fabrication of loop take up assembly with trolley which including labour cost, oxygen, DA and welding and making 4 nos. of pullies

1000 mm PVC Belting transportation from surface, laying, jointing tensioning trail run etc.

1)Holding down bolts of Drive Hd & Stucture , and Tail End. – 40 Nos 2) 8 times belt shifting(09 holes in each shifting)

Transportation of ACB, starter & PVC cable, Pull Cord, Signaling System etc surface to site.

8 times belt extension including Tail End Assembly and hopper Shifting - 14 hds. x 1.5 shifts = 21 hds. for one extension,

Fencing of Drive Head, Loop Take Up and Tail End (Tail end fencing 16 times)

Consumable Nut & Bolt 1/2” X 11/2” – 240 Kg, 5/8 “X 2“ -50 Kg, Plain washer- 20 Kg, 5/8" X 21/2"-10 Kg

Hanging by vartical support 30 mtr. length conveyor structure providing M.S. channel

Fabriation of complete drive head including gear and motor base frame

Total impact of GST for the purpose of CTC

NANDI ENTERPRISE (BID ID -1133693)

BABLU SINHA (BID ID -1133699)