Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.9 LAccepted-Finance BOOTH NO 15 SHOPPING COMPLEX URBAN ESTATE PHASE II JALANDHAR CITY PIN 144022 | JALANDHAR | PUNJAB | 144022 | L1 | Accepted-Finance Lowest and reasonable bid | |
| 2 | L2₹21.8 L+₹90,022.60 (4.32%)Rejected-Finance 15 GURU RAM DASS COLONY MITHAPUR JALANDHAR | L2 | Rejected-Finance Other than the lowest bid | |
| 3 | L3₹22.7 L+₹1.9 L (8.92%)Rejected-Finance | L3 | Rejected-Finance Other than the lowest bid | |
| 4 | L4₹22.9 L+₹2.0 L (9.65%)Rejected-Finance | L4 | Rejected-Finance Other than the lowest bid | |
| 5 | L5₹23.7 L+₹2.9 L (13.9%)Rejected-Finance | L5 | Rejected-Finance Other than the lowest bid |
Tender Value
₹20.2 L
EMD Value
₹40,460
Closing Date
15 May 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER (WEST)
KABIR ROAD JALANDHAR CANTT
CERTAIN REPAIR TO OTM/ MD ACCN PERTAIN TO AGE B/R-II UNDER GE (WEST) JRC
2024_MES_648414_1
GE/JAL(W)-97/2023-24
Open Tender
Civil Works
Item Rate
270 days
JALANDHAR CANTT
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GARRISON ENGINEER (WEST)
₹40,460
Yes
11 Jun 2024
30 Mar 2024
22 May 2024
30 Mar 2024
15 May 2024
3 May 2024
Amount
M&L preparation of old decorated plastered or unplastered surfaces of wall, pillasters, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, mouds moss and efflorescent salts and trading oil and greasy spot and applying one coat of white wash complete all as specified and as directed
All as per ser item No 1 above but on ceiling complete all as specified and as directed
M&L preparation of old distempered surface of wall, pillasters cornices etc by washing rubbing down & stopping etc and applying one coat of oil emulsion distemper complete all as specified and as directed
M&L preparation of old distempered surface of wall, pillasters cornices etc by washing rubbing down & stopping etc and applying two coat of oil emulsion distemper complete all as specified and as directed by Engineer-in-Charge.
Complete removal of existing treatment on wall and applying Two coat of oil emulsion distemper (white) on one coat of putty filling on walls etc (Surface finished even and smooth) complete all as specified and as directed by Engineer-in-Charge.
M&L preparation of old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complee all as specified and as directed
M&L prepartaion of old painted surfaces of steel and iron work of any description over 10 width or girth and applying one coat of synthetic enamel paint comlete all as specified and as dircected by the Engineer-In-Charge
Demolition of cement Concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) or as in sunken complete.
M & L PCC 1:3:6, type C-2, 50mm thick as in plinth protection, Surface finished fair and smooth without using extra cement.
S& F 500 Ltr capacity of rotational moulded polyethylen water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position including dismantling of tank complete all as specified and as directed by the Engineer-In- Charge.
All as per ser item No 10 above but 1000 lter capacity complete all as specified and as directed
S&F 20mm Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repair
S&F ball float valve PTMT with epoxy coated aluminimum rod for 20 mm bore pipe high pressure with polythelene high density float and complete screwed for iron pipe.
Taking up or down existing steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as dircted for 15 mm dia bore
Taking up or down existing steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as dircted for 20 mm dia bore
Refixing only 15mm dia bore GI tubing, jointing and testing galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings, the rate also included for cutting through walls floors etc.
S&F 15mm dia bore GI tubing, jointing and testing galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings, the rate also included for cutting through walls floors etc.
Refixing only 20mm dia bore GI tubing, jointing and testing galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings, the rate also included for cutting through walls floors etc.
S&F 20mm dia bore GI tubing, jointing and testing galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings, the rate also included for cutting through walls floors etc.
Cutting chases, pinning in, making good to facing where reqd and pointing in CM 1:3 to ends of edges of landing etc and cutting chases for concealed water tubing and making good cutting exc 10 cm but n.exc 20 cm girth.
S&F in repairs fancy type chromium plated cast copper alloy bib taps long shank & cup 15mm dia bore complete all as specified and as directed
S&F in repairs15mm bore cast copper alloy chromium plated fancy type wall mixer tap for cold & hot complete all as specified and directed
S&F in repairs 15mm dia bore stop cock /Angle valves cast copper alloy chromium plated fancy type with long shank & cup complete all as specified and as directed.
S&F 15mm dia bore angle cock two way Cast copper alloy chromium plated, fancy type with long shank & cup all as specified and fixed in repairs.
S&F in repairs 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed
S&F in repairs vitreous china squatting pan 'ORISSA PATTERN ' size 580mmx440mm 'white with integral foot rest (excluding flushing cistern and flush pipe ) including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed
S&F in repairs vitreous china wash down water closet (Pedastal pattern) 'white (excluding flushing cistern and flush pipe ) including connection todrain or out going pipe and to flushing pipe anti syphonage pipe and making good to floor complete all as specified and as directed
S & F in repairs brass chromium plated jet/health faucet for pedestal pattern water closet including PVC flexible pipe alongwith complete necessary fittings all as specified and directed by the Engr- in- Charge.
Supply & fix only water closet seat cover, white closed pattern with flat bottm & cover for EWC complete all as specified and as directed
S&F in repair vitreous china wash hand basin (pedastal pattern) white flat back, size 550mmx400mm fixed on and including cast iron cantilever brackets 32mm dia brass waste coupling and including fixing of tap waste fitting and union complete all as specified and as directed . Note: pillar tap shall be measured as supply only under respective items
S&F in repair PVC connection 15mm dia and 450mm long with both ends brass fly nut complete all as specified and as directed (Make Prayag/Polytuf)
S&F in repair 15mm dia bore pillar tap cast copper alloy, wih capstan heads, chromium plated , screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shank and flynust, screwed for iron pipe and fixed complete all as specified and as directed
S&F in repairs 15mm dia bore cast copper alloy chromium plated fancy type mixer pillar tap for cold & hot water complete all specified and as directed
S&F in replacement 32mm dia PVC waste pipe for WHB complete all as specified and as directed.
S&F 32mm dia waste fitting brass chromium plated for basin with long screwd shanks and fly nuts flange end bedded in red lead cement and other end fixed
S&F in repairs coloured PVC toilet cabinet of size 440x325x120mm with looking mirror in replacement of existing looking mirror/woodencabninet and repairing the disturbed surfaces to match with existing.
S&F in repair for pre-fabricated stainless steel plate rack made out of 1 mm thick stainless steel plate jointed with brass screws of size 600 x 750mmx 250mm complete all as specified and directed
S&F in repair kitchen sink with drainage board made out of 1mm thick stainless steel with plugs washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe over all size 915mmx460mm & bowl size 410mm x330mmx160mm complete all as directed by the Engineer-in-Charge
S&F in repair brass chromium plated tubler towel rail 20mm dia D type, 60cm long between flanges complete all as specified and as dirceted
S&F as in repair Brass chromium plated shower rose 125mm complete.
S&F 4mm thick superior quality shelves (corner), made of transparent toughened glass, size 30x30cm complete all as specified and as directed.
S&F in repairs stainless steel toilet paper holder with gutties and steel screws on walls as directed and approved complete all as specfied
S&F stainless steel soap dish complete all as specified
S&F 4mm thick superior quality straight shelve , made of transparent toughened glass, size 60cm long complete all as specified and as directed.
S&F in repairs Chromium plated grating 100/125mm dia circular of approved make and fixing with cement mortor 1:3 on Nahani trap or floor trap.
S & F towel rack 24 inch CP type with all fittings and fixed to walls complete all as spd.
S&F in repair floor trap size 75/100mm dia out let with grating including connection to waste pipe with cement jointing including taking down existing trap complete all as specified and directed
Demolition and breaking up drain pipes 100 mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as spd.
Demolition and breaking up drain pipes 75 mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as spd.
S & F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in floors complete.
S & F 110 mm PVC (SWR) bends any radius provided with access door.
S & F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in floors complete.
S & F 75 mm PVC (SWR) bends any radius provided with access door.
S&F epoxy powder coated pelmet rods of mild steel with and including pair of brackets complete fixed as in repair.
S& F 1mm thick Stainless steel hollow curtain rod with brackets and side doom fixed with all necessary drilling/fixing wooden/plastic cleats in wall complete all as specified and directed.
Taking down cement plaster on brick wall suface raking out joints hacking for key scrubbing down with water complete all as specified and directed
M&L rendering 15mm thick in cment mortar 1:4 (upto double storey) on fair faces of brick or concrete surface of wall rendering is to be finished even smooth with out using extra cement complete all as directed by the Engineer - In- Charge. Note :- The quoted rate shall incl rate for scaffolding & other neccessary arrangements for working upto triple storey.
M&L preparation of new surface of wall and aplying two coat of cement base paint complete all as specified and directed
M&L rendering 5 mm thick on fair faces of brick work or concrete surfaces in CM 1:3 on ceiling/chajja etc upto triple storey and finishing the surface even and smooth without using extra cement. Note :- The quoted rate shall incl rate for scaffolding & other neccessary arrangements for working upto triple storey.
M&L renderig 15mm thick cment mortar 1:6 on other than fair faces of brick or concrete surface of wall rendering is to be finished even and smooth with out using using extra cment
M&L for preparing new plastered surfaces of ceilling and applying 3 coats of white wash.
M & L Preparation of new surface of wall with Birla putty filling on plastering surface and applying two coat of oil emulsion distemper white or printed on walls.
Dismantling floor hearth wall tiling (but not backing) removing servicable tiles to store rubbish off the premisses complete all as specified and directed
M&L 15mm thick screed bed or bedding layer of cment mortar 1:4 to laying floor finish
M&L non skid ceramic colour tiles 7 to 8 mm thick joint free edge cut (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm(400mmx400mmx7 mm thick) set and jointed in neat cement slurry and pointed in colour cement to match as in floor complete all as specified and as directed
All as per ser item No 66.00 above but in skirting and dado including rendering/screeding including cement mortar1:4 , 10mm thick
M&L vitrified ceramic tiles 10mm thick (square/rectangular)polished area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in colour cement to match complete all as specified and directed
All as per ser item No 68.00 above but in skirting and dado including rendering/screeding including cement mortar1:4 , 10mm thick
M&L glazed ceramic colour tiles 300mmx450mm/300mm x200mm x7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as skirting/dado over cement mortar rendering/screding 10mm thick 1:4 complete all as specified and as directed
M&L for 20mm thick granite slab, machine cut, well polished, bedded in 15mm thick in CM 1:4 as in cooking plaforms & like and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixtures of pigments to match the shade of granite stone including cutting and polishing etc. complete all as specified and directed.
Taking chowkhat or frame with shutters (with out out taking off the shutter from the frame ) n. exc 1.5 Sqm each complete all as specified and as directed.
All as per ser item No above but exc 1.5 sqm but ont exc 4 Sqm each
Taking down shutter refixing after easing, adjusting area exc 1 Sqm but not exc 2 sqm each complete all as specified.
Taking down shutter area exc 1 Sqm but not exc 2 sqm each complete all as specified.
S&F steel window 1.25mm thick box type ERW hollow P section of size 60mm x25mm single rebated comprise of gauged skelton shutter ERW size 50mmx20mm and 1.25 mm thick with two openable leaf consisting two Nos sash bars of T- section 20mmx3mm welded to frame with one vertical mullion of ERW box type T- section of size 60mmx25mm and 1.25 mm thick including cutting holes and making good dismantled portion with PCC (1:2:4) type B-1 (four Nos for each window)including following fittings weled to frmae shutter:- (a) Hold fast 150mm long of 12mm x3mm made to shape -04 Nos per window. (b)Handle of z section 20mmx25mm, 100mm long - 01 Nos per leaf. (c) MS Tower bolt 150mm long -02Nos per leaf. (d) Z-section 20mmx25mm 100mm long 01 Nos per leaf.(e) MS pintol hinges of size 75mmx12mm-02 Nos per leaf. Note :(i) Fabrication & fixing shall be as per drg No CEJZ/TD-06/07 (ii) Wire mess and painting shall be measured and paid separatly under respective items.
All as per item No 76.00 above but window with glazed shutter. Note :(i) Fabrication & fixing shall be as per drg No CEJZ/TD-06/07 (ii) Glass panes and painting shall be measured and paid separatly under respective items.
S&F mild steel work as in as in grill gratings, door frames, gates etc with ends of bars shouldered and or riveted or fixed in spike, framed guard bars barred iron doors ladders frame balusters walk ways confirming to Fe- 290, Gde E-165 complete all as specified and as directed.
S & F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed ® size 125x 60 mm
S&F pressed steel door frame with one or more rebate including necessary fixing lugs, hinges, lock stricking plate of size 105 x60mm
M&L for PCC Type B0-1:2:4 using 12.5mm graded aggregate as in pressed steel frame, hold fasts and similars articles
S&F 35mm thick locally fabricated Plain framed panelled shutter (two planel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of the rail and stile as per IS:1003(Part I), kiln sseasoned and chemically pressure treated 35mm thick.
S&F 35 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F mild steel framed work such as door/cupbd frame, etc with end of bars shouldered and/or riveted or forged into spikes and similar works including one shop coat of zinc chromate primer and cutting holes/making surface good in cement concrete 1:2:4 type B-0 complete all as specified.
S&F solid PVC door frames of size 50mmx47m made out of 5mm plain colour PVC sheet reinforced with MS Square tube supplying & fixing in opening as per specification and drawing
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having a VC sheet strip of 20mm which stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rails & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the M.S frame weled/ sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification & drawing
M&L 18/19 mm thick prelaminated particle board exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber framed work including fixing arrangement complete all as specified
S&F PVC cupboard shutter (Front or shelf) made of 18/19 mm pre-laminated board (Decorated outside and plain white/cream on inner side) fixed with PVC cleats etc. complete all as specified and directed.
S&F continuous piano hinges mild steel bright finish of flap width 30mm
S&F 40m dia cup board knobs fixed with nut , screw and washer of brass polished
M&L Hasp and staple safety type aluminum anodised 75mm size with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified
S&F 100mm butt hinges, mild steel medium weight cold rolled and fixed
S&F 75mm butt hinges, mild steel medium wt cold rooled and fixed
S&F 300 mm long aluminium alloy, anodized sliding door with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified.
S&F 150mm size Aluminium handles, cast type, anodised and fixed of approved make & ISI marked.
S&F aluminium anodised barrel tower bolt of extruded section of 200mm size
S& F galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete fixed with tinned tacks or galvanised wire staples all as specified and as directed
Supply& Fix sheet glass ordinary quality 3mm thick n, exc 0.5 sqm in each pane including hacking out old broken glass complete all as directed
Preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of pink primer.
Preparation of new steel surface of any description over 10 CM width or girth and applying two coats of synthetic enamel paint complete all as specified
Demolition of brick built in CM including all quoins arches pillars etc.
M & L brick work with sub class 'B' bricks in CM 1:6, straight or curved on plan exc 6 mtr nean radius, using old size bricks
M & L brick work with sub class 'B' bricks in CM 1:6, except bricks straight or curved on plan exc 6 mtr nean radius, using old size bricks
S&F anodized aluminium frames with powder coating (minimum thickness of powder coating 50 micron) for sliding doors, windows, ventilators etc with one or more rebates including jointing cleat for fixing etc.complete all as specified and specified.
S&F anodised aluminium door shutter with powder coating (minimum thickness of powder coating 50 micron) aluminium sections weighing not less than 1.10 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, anodised aluminium hinges, snap beading, screws,etc complete all as specified
S&F anodised aluminium window(Sliding or side hung shutter) and ventilator shutters, with powder coating (minimum thickness of powder coating 50 micron) side hung/ sliding type without sash bars, aluminium sections weighing not less than 1.10 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21,100mm long (2 no.) suitable handle (1 no.) complete all as specified.
S&F tinted Sheet glass 5.5 mm thickness, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane
Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples
M/S Kuldip Construction Co.
M/S Vinod Kumar
G S TRADERS
AAY KAY ENGINEERS
M/s Nirmal Singh and Co.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .