GE/ALP (8102B) KOLKATA OF 2022-23

Amount

Taking down ceiling fan of any type, any make and any sweep for repairing,opening the body and blade, checking for repalcement of unserviceable spares,cleaning, overhauling, greasing, replacement of unserviceable spare by new one, re-assembling of all components in original position, testing and hanging up the same as directed. complete all as specified and as directed. Note : New spare parts required for replacement shall be measured and paid separately under relevent items as 'Supply only"

M & L for rewinding of ceiling fan, 1200mm sweep with synthetic enamel copper wire including insulation of starter with polyster paper/manllex paper with cotton binding, heat varnished and including flexbile cable for electric connection. complete all as specified and as directed.

All as per item No 2 here-in-before but for 1400mm sweep.

Supply only ball bearing of size 6201/6202/6203.

Supply only metal bush bearing suitble for ceiling fan 1200/1400 mm sweep of any type and size.

Supply only capacitor for ceiling fan 2.25 MFD

Supply only capacitor for ceiling fan 2 MFD

Supply only fan blade (3 Nos blade is one set) 1200 mm sweep (Make: USHA/Havells /Bajaj)

Supply only fan blade (3 Nos blade is one set) 1400 mm sweep (Make: USHA/Havells /Bajaj)

Supply only stepped type electronic fan regulator existing phenolic laminated sheet of AC 120/280 volt.

Supply and fixing as in repair of MS clamps made out of 50 x 6mm flat iron suitable for hanging of ceiling fan on pipe including necessary cutting, threading, drilling, fixing arrangement split pin, nuts, bolts washer etc as directed. complete all as specified and as directed.

Material and labour in replacement of fan hooks, hold fasts for suitable for hanging of ceiling fan complete make good and complete all as specified and as directed.

Material and labour in replacement of GI tubing 15 mm 'light grade',galvanised, (Down rod) with all fitting; suitable for hanging of ceiling fan as required. complete all as specified and as directed.

Material and labour for painting of ceiling fan complete, in situ of size 1200/1400mm sweep with down rod upto 2.00 mtr long with two coats of synthetic enamel white paint including preparation of old painted surfaces including writing of MES No with letters n exc 15mm height complete all as specified and as directed.

Taking down exhaust fan/wall mounted fan of any type, any make, by opening of body carefully checking for repalcement of unserviceable spares, including replacement of spares by new one, re-assembling of all components in original position, cleaning, oiling greasing, testing and fixed in original position Complete all as specified and as directed. Note : New spare parts required for replacement shall be measured and paid separately under relevent items as 'Supply only"

M & L for rewinding of exhaust fan, 300mm sweep with super enamelled copper wire and insulation of starter with polyster paper/manllex paper with cotontak binding, heat varnished and complete all as specified and as directed.

All as per item No 16 here-in-before but for 350 mm sweep.

All as per item No 16 here-in-before but for 450 mm sweep padestal fan.

All as per item No 16 here-in-before but for wall mounting fan 400 mm sweep complete all as specified and as directed by the Engr-in-Charge.

Supply only capacitor for exhaust fan 4.00 MFD.

All as per item No 20 here-in-before but 3.15 MFD.

Material and labour for preparation of exhaust fan/wall mounting fan and applying one coat of grey synthetic enamel paint by spraying using spray gun with filling cavities including writing of MES No, taking down and refixing complete all as specified and as directed.

M & L for rewinding of Padestal fan, of size 450 sweep with super enamelled copper wire and insulation of starter with polyster paper/manllex paper with cotontak binding, heat varnished complete all as specified and as directed.

M & L for rewinding of wall mounting fan, of size 400mm sweep with super enamelled copper wire and insulation of starter with polyster paper/manllex paper with cotontak binding, heat varnished complete all as specified and as directed.

Supply and fixing in repair Loovers of exhaust fan, 300mm sweep with fixing arrengment complete all as specified and as directed.

Supply and fixing in repair Loovers of exhaust fan, 350mm sweep with fixing arrengment complete all as specified and as directed.

Supply and fixing in repair Loovers of exhaust fan, 400mm sweep with fixing arrengment complete all as specified and as directed.

Supply and fixing in repair Loovers of exhaust fan, 450mm sweep with fixing arrengment complete all as specified and as directed.

Taking down geyser and scraping, cleaning including brazing of inner vessel of the geyser at leakage point to made it leak proof including testing pressure and assembling of all component refixing complete for 25 Ltr capacity. complete all as specified and as directed. Note : New spare parts required for replacement shall be measured and paid separately under relevent items as 'Supply only"

Supply only heating elements of 2 KW 230 V suitable for water heater of any type including connection with suitable cable.

All as per item No 30 here-in-before but of 1.5 KW.

Supply and fixing in repair thermostat switch of geyser 230V, 30 degree to 90 degree centigrade temp range to be set at 70 degree to 50 degree centi grade suitable for water heater.

Supply and fixing in repair indicating lamp, 230 V, flush type, rectangular, red and green indicator suitable for water heaters. complete all as specified and as directed.

Supply and fixing in repair PVC inlet connector pipe 450mm long for geyser, heavy duty,with brass coupling both ends sutiable to fix inlet of geyser. complete all as specified and as directed.

Supply only 450mm long brass CP connection with 2 nuts without nipple suitable for geysers. (Make : Jaquar Cat No 805B or equivalent as approved by the GE)

Material and labour preparation to old painted surface of storage water heater and painting of geyser 25 ltr capacity with two coats of synthetic enamel paint (white) by using spray gun complete all as specified and as directed.

All as per item No 36 here-in-before but for 35/50 ltrs capacity.

Supply and fixing as in repair for Split cover made out of 22 guage sheet duly painted with synthetic enamel paint suitable for water heater of 25 ltr capacity. complete all as specified and as directed.

All as per item No 38 here-in-before but for 35/50 ltrs capacity.

Supply and fixinging as in replacement patented nano polymer coated steel inner tank of 25Ltr capacity geyser (suitable for model of make: Crompton/Usha/Bajaj) all testing and make good in disturbed surface at existing location complete all as specified and as directed.

All as per item No 40 here-in-before but for 50 ltrs capacity.

Supply and fixing as in replacement copper inner tank of 25 Ltr capacity geyser (Suitable for model of make Usha/Bajaj/Crompton) complete all as specified and as directed.

Supply and fixing as in repair for non return valve, 15mm bore, screwed down high pressure, cast copper alloy, chromium plated. complete all as specified and as directed.

Supply and fixing as in repair for pressure release valve 15mm bore 'T' type at inlet/ outlet or dead weight type heavy duty. complete all as specified and as directed.

Supply and fixing as in repair for apparatus plate , including suitable for water storage heater type 25 ltrs capacity. Complete all as specified and as directed.

Supply and fixing as in repair for fusible plug , calibrated 95 deg to 100 deg C suitable for water heater. complete all as specified and as directed.

Supply and fixing as in repair for glass wool , between the inner and outer vessel of water heater any type and capacity. complete all as specified and as directed.

Supply and fixing as in repair for PVC insulated flexible copper conductor cable (FRLS) 4 Sqmm 3 core , 1100 Volts grade conforming to IS 694. complete all as specified and as directed.

Supply and fixing as in repair 15mm dia GI nipple, 2" long including GI socket. complete all as specified and as directed.

Supply and fixing rubber gasket as in repair for appratus plate any type/capacity all as specified and directed. complete all as specified and as directed.

Material and labour for replacement of 80-100 mfd Starting capacitor for water cooler of capacity 80/ 150 ltrs, complete all as specified and as directed. (make : Sarda/ Power or equivalent as approved by the GE)

Material and labour for replacement of running capacitor 10 mfd for Water Cooler of capacity 80/ 150 ltrs, (make : Sarada/Power or equivalent). complete all as specified and as directed.

Material and labour for replacement of 15mm bore chromium plated push cock suitable for water cooler of any capacity as per existing shape and make or equivalent. complete all as specified and as directed.

Material and labour for replacement of thermostat switch for water cooler, complete all as specified and as directed. (Make : Indfoss or equivalent as approved by the GE)

Material and labour for replacement of Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed of size 15mm complete all as specified and as directed.

Disconnecting defective sealed compressor unit of Water Cooler Upto 150 ltrs capacity from the water cooler and fixing repaired/ reconditioned sealed unit compressor in original position complete all as specified and as directed.

Material and labour for replacement of Door gasket for 150 ltrs capacity Water Cooler complete all as specified and as directed.

Material and labour for replacement of Door gasket for 80 ltrs capacity Water Cooler complete all as specified and as directed.

Material and labour for replacement of Starting Relay suitable for water cooler 80/ 150 ltrs capacity complete all as specified and as directed.

Material and labour for replacement of Overload protector suitable for Water Cooler of capacity 150 ltrs complete all as specified and as directed.

Material and labour for replacement of Overload protector suitable for Water Cooler of capacity 80 ltrs complete all as specified and as directed.

Material and labour for replacement of Starting relay box type for Refrigerators of capacity upto 315 ltrs complete all as specified and as directed.

Material and labour for replacement of Capillary copper tube of size 0.36 mm for Refrigerators of capacity upto 315 Ltrs complete all as specified and as directed.

Material and labour for replacement of Freezer door for Refrigerators of capacity upto 315 ltrs complete all as specified and as directed.

Material and labour for replacement of Thermostat switch (Make : Indfoss/Kelvinator) for Refrigerators of capacity upto 315 ltrs complete all as specified and as directed.

Material and labour for replacement of Chill tray for Refrigerators of capacity upto 315 ltrs complete all as specified and as directed.

Disconnecting defective condensor coil of Refrigerators upto 315 ltrs capacity and replacing the same with new condensor coil and fixing in original position as per existing. complete all as specified and as directed.

Material and labour for replacement of Inner lights for Refrigerators of capacity upto 315 ltrs. complete all as specified and as directed.

Disconnecting defective sealed compressor unit of Refrigerators upto 315 ltrs capacity and fixing repaired/ reconditioned sealed unit compressor in original position. complete all as specified and as directed.

Material and labour for replacement of Door switch for Refrigerators of capacity upto 315 ltrs. complete all as specified and as directed.

Material and labour for replacement of 5 Amps, 230 Volts Plug Top. complete all as specified and as directed. (Make : Anchor or equivalent as approved by the GE)

Supply and fixinging Digital thermometer LCD (Hygrometer) For Indoor Humidity and Tempratuer Sensor. complete all as specified and as directed.

Supply and Refill Suitable Gas for Refrigrator up to 315 Ltr. complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

Taking down carefully sub main wiring of size upto 16 Sqmm including making good disturbed surfaces of walls, ceilings etc. complete all as specified and as directed.

Material and labour for surface type point wiring for one light/fan point controlled by One Way switch,with 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade ,controlled by one way switch drawn through and including appropriate size of PVC casing caping with all accessoriese for surface wiring including 1.5 sqmm PVC insulated un shealthed copper cable (FR-LSH) multistrand conductor 1100 Volts grade for continuity earth wire connected to Each point and sunk cast pressed steel terminal box made out of MS sheet 1.25mm thick for mounting of fittings like switch, socket and fan regulator with 3mm thick PVC laminated/bakalite sheet cover. complete all as specified and as directed.

All as per item No 76 here-in-before but for 3 Pin socket outlet 5 Amps same board with other switches with cable 1.5 Sq mm size. complete all as specified and as directed.

All as per item No 76 here-in-before but for 3 pin 5 Amps independent board. complete all as specified and as directed.

All as per item No 76 here-in-before but for 3 pin 5 Amps independent in the same vertical plane/below the switch board of light/socket points with cable,1.5 Sq mm size.

All as per item No 76 here-in-before but for 5 pin 15 Amps switch socket combination on independent board with 2.5 Sqmm cable. complete all as specified and as directed.

All as per item No 76 here-in-before but for power supply unit consisting of starter or 5 pin 15Amps switch socket combination on independent board with 4.0 Sqmm cable. complete all as specified and as directed.

Material and labour for socket outlet 2 in 1,3 pin, 5 Amps, 240 V on same board. complete all as specified and as directed.

Material and labour for switch socket combination 3 pin 15 Amps, 240 V Flush type, complete all as specified and as directed.

Material and labour for switch socket combination 5 pin 16 Amps, flush type, 240 Volts, complete all as specified and as directed.

Material and labour for power supply unit consisting of starter with 20 amps over load protection, MCB-20 amps, 2 pin & earth plug socket including MS/PVC box & top cover for AC after taking down old one. complete all as specified and as directed. (Make: Crabtree or equivlent as approved by the GE)

Supply and fixing switch piano type 5 Amp single pole one way. complete all as specified and as directed.

Supply and fixing for ceiling rose surface backelite 65 x 50mm three terminal. complete all as specified and as directed.

Supply and fixing in repair for stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc including taking down old unserviceable regulator. complete all as specified and as directed.

Supply and fixing in repair for socket outlet 2 in 1,3 pin, 5 Amps, 240 V on same board. Complete all as specified and as directed.

Supply and fixing in repair for switch socket combination 3 pin 15 Amps, 240 V Flush type, complete all as specified and as directed.

Supply and fixing in repair for power supply unit consisting of starter with 20 amps over load protection, MCB-20 amps, 2 pin & earth plug socket including MS/PVC box & top cover for AC after taking down old one. complete all as specified and as directed. (Make: Crabtree or equivlent as approved by the GE)

Supply and fixing in repair for switch piano type 5 Amp single pole one way. complete all as specified and as directed.

Supply and fixing in repair for Buzzer call bell AC 230 Volt single pole. complete all as specified and as directed.

Supply and fixing in repair of for bell push 5 Amp. complete all as specified and as directed.

Supply and fixing in repair for ceiling rose surface backelite 65 x 50mm three terminal. complete all as specified and as directed.

Supply and fixing in repair for Switch piano type 5 Amp two way. complete all as specified and as directed.

Supply and fixing in repair of MCB, single pole, 240 Volts, of capacity (6-32 Amps) as ordered breaking capacity 10 KA. complete all as specified and as directed. (Make-Legrand Cat No-4085-87 to 4085-95 or equivalent as approved by the GE)

Supply and fixing in repair MCB SPN, 40 to 63 Amps, 240 Volts , breaking capacity 10KA. complete all as specified and as directed. (Make-Legrand Cat No-4086-18 to 4086-20 or equivalent as approved by the GE)

Supply and fixing in repair MCB TPN, 63 Amps, 240 Volts, breaking capacity 10KA complete all as directed. (Make-Legrand Cat No-4087-02 or equivalent as approved by the GE)

Supply and fixing in repair MCCB TPN, 160 Amps, 240 Volts , breaking capacity 25KA. complete all as specified and as directed. (Make-Legrand Cat No-4200 57 or equivalent as approved by the GE)

Supply and fixing as in repair MCB DB SPN (double door) 8 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall. complete all as specified and as directed.

Supply and fixing as in repair MCB DB SPN (double door) 4 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall. complete all as specified and as directed.

Supply and fixing as in repair MCB DB SPN (double door) 2 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall. complete all as specified and as directed.

Supply and fixing as in repair MCB DB TPN (double door) 4 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall. complete all as specified and as directed.

Material and labour for sub main wiring for main DBs to Sub DBs with standard copper conductor 1100 volts grade of size 4 sqmm two run of multistrand unsheathed PVC insulated cable (Red colour cable used for live connection & Black colour cable used for neutral connection) and 4 sqmm copper multistrand conductor 1100 volts grade multistrand un-sheathed PVC insulated (Green colour cable used) cable for earth continuity wire connected from main earth through PVC conduit / casing caping of size 25mm for including of all accessories complete all as specified and as directed. Note : Two runs of 4 sqmm and one run of 4 sqmm cable with PVC conduit shall constitute one unit.

Supply and fixing as in repair sub main wiring(surface type) for main DBs to Sub DBs with PVC insulated & unshaethed four two run of 6 Sqmm single core multistrand copper conductor cable, 1100 Volts grade alongwith one run of 6 sqmm PVC insulated & unshaethed copper conductor cable, 1100 Volts grade, connected to common earth dolly as earth continuity conductor, with PVC conduit / casing caping of size 25mm for including of all accessories complete all as specified and as directed by the Engr-in-Charge. Note : Three runs of 6 sqmm cable with PVC conduit/caping casing shall constitute one unit.

Material and labour for sub main wiring as in repair wiring ( surface type) for main DBs to sub DBs with PVC insulated two runs of 10 sqmm single core multistranded copper conductor cable , 1100 volts grade, along with one run of 10 sqmm PVC insulated & unsheathed copper conductor cable, 1100 Volts grade, connected to common earth dolly as earth continuty conductor , through PVC conduit / casing caping of as required for including of all accessories complete all as specified and as directed. Note : Three run of 10 sqmm cable with conduit pipe / casing caping shall constitute one unit.

Supply and fixing as in repair sub main wiring(surface type) for main DBs to Sub DBs with PVC insulated & unshaethed four runs of 16 Sqmm single core multistrand copper conductor cable, 1100 Volts grade alongwith two run of 16 sqmm PVC insulated & unshaethed copper conductor cable, 1100 Volts grade, connected to common earth dolly as earth continuity conductor, with PVC casing capping/PVC conduit of suitable size including of all accessories complete all as specified and as directed. Note : Sux runs of 16 sqmm cable with PVC conduit/caping casing shall constitute one unit.

Material and labour for earthing as in repair complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised strip of size 25 x 4mm by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded stone aggregate), 50 mm thick precast RCC (1:2:4) type - B1 (using 20mm graded stone aggregate) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 500 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion all as specified and as directed by the Engr-in-Charge.

Supply and fixing Earth continuity conductor of 25mm x 4mm galvanised iron strip with saddle and fixing screw for conductor above ground, complete all as specified and as directed.

Supply and fixing Electronic LED light fitting Driver Up to 36 watt. Complete all as specified and as directed.

Supply and fixing in repair main terminal boxes made out of GI sheet,not less than 1.2 mm thick of existing main switch board of any size (housing of switches, sockets outlets, regulators etc) complete including making good with existing coulor of disturbed surfase of wall. complete all as specified and as directed.

Supply and fixing repair GI terminal boxes made out of GI sheet,not less than 1.2 mm thick of existing size housing of at least one switch sockets outlets15 Amps etc complete including making good with existing coulor of disturbed surfase of wall. complete all as specified and as directed.

Supply and fixing repair GI terminal boxes made out of GI sheet,not less than 1.2 mm thick of existing size housing of at least one switch sockets outlets 5 Amps etc complete including making good with existing coulor of disturbed surfase of wall. complete all as specified and as directed.

Supply and fixing in repair bakelite laminated sheat top cover 3mm thick of existing size main switch board (mounting of switches,sockets outlets,regulators etc) complete including refixing seviceable switches, switch sockets and regulators etc. complete all as specified and as directed.

Supply and fixing in repair bakelite laminated sheat top cover 3mm thick of existing size for mounting of ,switch sockets outlets 15 amp, etc complete including refixing seviceable switch sockets etc. complete all as specified and as directed.

Supply and fixing in repair bakelite laminated sheat top cover 3mm thick of existing size for mounting of switch sockets outlets 5 Amp etc complete including refixing seviceable switch sockets etc. complete all as specified and as directed.

Supply and fixing LED Spot light deep recessed antigare LED Spot down light for gerneral accent light 10. complete all as specified and as directed. (Make Havells cat No - UNECOBRITER 10WLED827S24 or equivalent in Philips/Havells/Magik Century)

Supply and fixing in repair 2'x2' energy efficient recess mounting 30 watt LED lumanaries fixing for POP ceiling housing including LED lamps other accessories and necessary electric connection after and including taking down old unserviceable fittings complete all as specified and as directed. (Make : CROMPTON,Cat No-LCTLRNE-30-FO-CDL or equivalent in Philips/Havells/Magik Century)

RADHA ENTERPRISE

NUPUR CONSTRUCTION

Tirupati Buildcon Pvt. Ltd.

PUTUL CONSTRUCTION CO.

PEARL CORPORATION

TOTCO

SOMANI BUILDERS