Construction of Anganwadi building at Poyyathanallur village

Earthwork excavation inhard gravelly soil with initial lead and lift in narrow trench as per SS20 B for fountation

Filling with carted earth gravel including cost and conveyance of all materilas to site and all labour charges etc., complete

Filling with good river sand including cost and conveyance of all materilas to site and all labour charges etc., complete

Cement concrete 1:4:8 mix (one cement four sand and eight hard broken stone) using 40mm ISS HBG metal for foundation including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing, etc., complete as per standard specification

Brickwork in Cement Mortar 1:5 mix using country bricks of standard size including cost and conveyance of all materials to work site and including all labour charges and all incidential charges etc., complete.

Supplying and erecting Centering and Shuttering for soffits including necessary supports and strutting up to 3 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at about 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specification. Below GL

Above GL

Supplying and fabrication of steel including cost and conveyance of steel to site and all labour charges for straightening, cutting to length, bending to shape and tying in position and forming grills for all R.C.C works

Reinforced cement concrete 1:1.5:3 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete

Plastering in Cement Mortar 1:5 mix, 12mm thick including cost and conveyance of all materials to work site and all labour charges etc., complete.

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work

Paving the floor with scratch proof ceramic tiles of any colour laid in CM 1:3 including cost and conveyance of all materials to work site and all labour charges etc., complete.

Paving the floor with pre polished anti skid tiles of 20mm thick of approved quality and laid in CM 1:3 including cost and conveyance of all materials to work site and all labour charges etc., complete.

Paving the floor with best quality verified tiles of size 600 x 600 x 8mm of approved colour and quality laid in CM 1:3 including cost and conveyance of all materials to work site and all labour charges etc., complete.

Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 using 10 to 12mm gauge hard broken stone jelly ncluding cost and conveyance of all materials to site and all labour charges etc., complete

Dadooing of walls with colour glazed tiles of size 150x150x6mm of best qulaity including cost and conveyance of all materials to site and all labour charges etc., complete

Bala painting two coats including cost and conveyance of all materials to site and all labour charges etc., complete

Emulsion painting with approved colour two coats including cost and conveyance of all materials to site and all labour charges etc., complete

Painting with approved colour ready mixed paint two coats including cost and conveyance of all materials to site and all labour charges etc., complete

Supply of steel door 0.90 x 2.10m

Supply of steel ventilator 0.90 x 0.45m

Supply of RCC jolly 0.90 x 0.45m

Supply of steel door 0.75 x 1.20m

Supply of Steel window 1.20 x 1.30m

Open PVC light point (SD N0.21)

Tube light SD No,87

PVC Plug point SD NO.40

Supply and fixing of WT bulk with CFI bulb fitting with guard for inflorcement lamp with guard and 60w bulbs SD No.84

Main service connection SD.No.66

GI service pipe SD.No.71

Earth stand

Meter board

Cost and supply of Cudapah slab

Cost and supply of hand rails 32mm thick

Cost and supply of IWC

Cost and supply of EWC

Supply and fixing 500 lr PVC tank

Provision of water supply arrangement

Provision for Name board

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}