Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹86.9 LAccepted-AOC 001 BHOOMI COLOSSA PLOT NO 04 SECTOR 19 AIROLI NEW MUMBAI 400 708 | NEW MUMBAI | THANE | MAHARASHTRA | 400708 | L-1 | Accepted-AOC Being L-1 | |
| 2 | L-2₹91 L+₹4.1 L (4.68%)Rejected-Finance | L-2 | Rejected-Finance Being L-2 |
Tender Value
₹87 L
EMD Value
₹1.7 L
Closing Date
18 Sept 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CE, CED
CED,BARC,Trombay, Mumbai
Maintenance of Civil Carpentry Works for Sea Side Buildings, North Site, BARC, Trombay, Mumbai for Year 2023-25.
2023_BARC_768310_1
BARC/CED/ET/40/2023-2024 Dated 23.08.2023
Open Tender
Civil Works
Item Rate
547 days
Sea Side Buildings NG BARC Trombay
Please refer Tender documents.
8 documents required · 8 mandatory
₹0
₹1.7 L
Yes
23 Nov 2023
24 Aug 2023
22 Sept 2023
28 Aug 2023
18 Sept 2023
28 Aug 2023
Amount
Providing wood work in frames of doors, windows, clear story openings and other frames, wrought framed and fixed in position of required size and shape including sawing, jointing, making rebates for shutters, making grooves as shown in the drawings, finishing the surfaces to the required finish all as per specifications and drawings including necessary MS hold fasts 40 mm X 3 mm thick, 200 mm long with coach screws including protective painting to the suface that will come in contact with walls, joining materials, labour etc. complete all as per specifications and as directed by the Engineer-in-charge.....Second class teak wood
Providing and fixing 35 mm thick flush door shutters conforming to IS : 2202 non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3ply veneering with internal teak wood lipping 25mm wide and fixing with 4 Nos of 125 mm long Stainless steel Hinges with S.S. woodscrews complete.
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Commercial flush door shutters
Extra for providing vision panel not exceeding 0.1 sqm in all type of flush door including fixing 4 mm clear glass with necessary teak wood beadings complete all as per specifications and as per drawings.
Providing and fixing pannelled teak wood door shutters (35 mm thick frames and 25 mm thick shutters) using second class teak wood using styles & middle rails 100 mm x 35 mm, bottom rail 200 mm x 35 mm, top rail & lock rails 150 X 35 mm and panelling with 25 mm thick best quality teak wood planks including fixing in existing door frame including ISI marked 100 mm stainless hinges with SS screws complete all as per specifications and as directed.
Providing and fixing C.P teak wood moulded beading (Architrave) of size 50 X 12 mm using 2nd class teak wood to door and window frames with necessary screws and painting with a coat of approved primer etc. complete
Providing and fixing FRP door shutters flush door / panelled type with plain colour or wooden veneer finish of approved make, design & colour. made out of 1.5 mm thick FRP skin moulded over wooden frame work of 40 mm wide and required thickness wooden styles and minimum 100 mm wide lock rails and wooden blocks for door stoppers, tower bolts, baby latch, aldrop, handles etc. wherever required and core filled with Polyurethane Foam and fixing with 4 Nos 100 mm (ISI marked) stainless steel hinges with S.S. wood screws.....35 mm thick panelled door type of approved colours including the cost of 100 mm ISI marked heavy quality stainless steel butt hinges with necessary screws.
Providing and fixing IS:12817 marked stainless steel butt hinges of size 125 x 64 x 2.5 mm (heavy weight) of approved make with suitable stainless steel screws etc. including removing & re-fixing of existing door shutter complete as directed by the Engineer-in-charge
Providing and fixing aluminium aldrops of size 250 X 16 mm ISI marked anodised transparent or dyed to requried colour or shade with necessary screws, bolting from rear side complete as per specifications and as directed by the Engineer-in-charge
Providing and fixing anodised aluminium tower bolts of size 250 X 12 mm ISI marked of approved make, transparent or dyed to requried colour or shade with necessary screws etc.
Providing and fixing anodised aluminium baby latch of size 75 X 12 mm ISI marked of approved make transparent or dyed to requried colour or shade with necessary screws etc.
Providing and fixing mortice latch and lock of approved make with 6 levers and a pair of handles Inside opening LEFT / Right with necessary screws etc complete suitable for fixing in wooden /steel/ FRP/ doors as per specifications.
Providing and fixing IS: 3564 marked aluminium die cast body tubular type universal hydraulic door closer of approved make with necessary accessories and screws etc. in wooden doors / steel doors with necessary bolts & nuts complete as per specificationsand as directed by the Engineer-in-charge.
Providing and fixing aluminium handles 175 mm long Inner grip 125 mm with 12 mm dia rod plate type BOW handles ISI marked of approved make, anodised transparent or dyed to req. colour or shade with necessary screws etc. complete.
Providing and fixing aluminium hanging heavy quality floor door stopper ISI marked with twin rubber stoppers, anodised transparent or dyed to required. colour or shade with necessary screws etc. complete.
Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (Note : fittings glazing and panelling shall be paid for separately)......Anodised Aluminium sections (Minimum anodizing thickness of 15 micron) NOTES : 1) The rates for aluminium is inclusive of all fastners required for fabrication and fixing in the walls. 2) All joints shall be of mittered Joints. 3) A long M.S. rod threaded at both ends to be provided in all aluminium door shutters in Top & bottom Horizontal members internally connecting Vertical members and fixed with M.S washers & nuts. 4) Only Aluminium members alone shall be measured and paid for.
Extra for colour anodizing
Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item)
With clear float glass panes of 4.0 mm thickness
With clear float glass panes of 6.00 mm thickness
With tinted colour float glass panes of 5.0 mm thickness
Providing and fixing double action hydraulic floor spring of approved brand and manufacturer (conforming to relevant Indian Standard) for doors including cost of removing & re-fixing of existing door shutter, cutting floors as required, embedding in floors and cover plates with M.S pivot and single piece of M.S sheet outer box with slide plate etc. complete as per directions of Engineer-in-charge with brass/SS cover plate.
Providing and fixing 4 Lever Mortice Lock of approved make suitable for aluminium sections
Providing and fixing approved quality and shape star locks cum handle of approved make for sliding shutters
Providing and fixing approved quality stain less steel body roller wheels of approved make for sliding shutters
Taking out doors, windlows and clear storey openings (steel / wood) shutter including stacking within 100 m lead (only shutters) Of area 3.00 Sq.M and below
Taking out doors, windlows and clear storey openings (steel / wood) shutter including stacking within 100 m lead (only shutters) Of area beyond 3.00 Sq.M
Making the opening in brick masonry for door / window / clear story opening including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete to match existing surface including disposal of mulba/rubbish to the nearest dumping ground.
Providng and fixing Aluminium Grill 10 mm thick in natural Silver anodising of min 15 Microns with a opening size of 80 mm x 66 mm and Minimum weight of 3.13 Kg/ Sq.M including providing anfd fixing Suitable 'F' / 'H' section outer frame and mullion fixing with screws complete all as per specifications and as directed at site by the Engineer-in-Charge. Aluminium alloy shall be of 6063-T6 with Yield strength of minimum 6.5 kg/ sq.mm. Note : Tentative / suggested make for guidance of bidder(s) : M/s. DECO GRILLE make Model No. DG- 102
Extra for providing Aluminium Grill 10 mm thick with colour anodised by the manufacturer (Champagne, black, Bronze, Gold colours) complete all as per specifications and as directed at site by the Engineer-in-charge.
Providing and fixing single point lock cum handle for aluminium openable windows/top hung shutters of approved equivalent quality and make complete all as per specifications and as directed by the Engineer-in-charge
Providing and painting TWO coats of synthetic enamel paint on new wooden surfaces of approved brand and manufacturer of required colour to give an even shade over an under coat of suitable shade primer of approved brand and manufacturer including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge
Providing and applying wall painting two coats on new work with premium plastic emulsion paint of approved brand to give an even shade, including a coat of approved cement primer, including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge
Providing and applying white cement based wall putty of approved make over concrete or Plastered surface up to 3 mm thick to get uniform surface free from undulation including cleaning complete all as directed by the Engineer-in-charge
Providing LOUVERED OPENING in door shutters including making the opening, providing & fixing teak wood louver blades with necessary teak wood framework & beading & applying one coat of approved wood primer etc. complete.
Removing carefully the existing damaged Aluminium frame / shutter with full size glass panel from its existing location without damaging any glass, Aluminium members, lock, floor spring etc. Resizing the same for smooth operation to make floor touch free including cutting the full size glass panel in two parts as directed, strengthening the aluminium shutter by providing & fixing 10 mm dia M.S. tie rods at both ends of the shutter, reshaping & refixing of existing board panel/glass sheet as required, re-erecting and repositioning the frame/shutter at the same place, re-fixing all fitting shch as pull/ push handle, hydraulic door clooser, floor springs, hinges, locking arrangement,tower bolt, replacing the existing damaged rubber gasket lining, aluminum cleats, clips with new ones etc. complete as required and as directed by the Engineer-in-charge. Notes: 1. The contractor shall provide the sundry materials such as rubber gaskets, screws, MS tie rods etc. No extra payment will be made for it. 2. Door closer, lock, if required will be measured & paid separately under relevant item.
Providing and fixing stainless steel (SS 304 Grade) adjustable friction windows stays of Size 255 X 19 mm of approved quality with necessary stainless steel screws to the side hung windows as per specifications and as directed by the Engineer-in-charge.
Providing and fixing mirror of superior glass of approved quality and of required shape and size with 6 mm thick Plain A.C sheet backing fixed to walls with consealed Brass C.P Mirror screws and consealed washers etc.complete all as per specifications and as directed by Enginner-in-Charge
Designing, providing and fixing of 4 mm thick approved make and shade Aluminium Composite Metal Panel of approved make cladding at different locations including soffits of over-hangs but excluding aluminium frame work with grids filled in with weather silicon sealant as per the drawings.The ACM panel composition shall be of 0.5 mm thick PVDF coated aluminium sheet + 3 mm thick low density polyethelene virgin resin core + 0.5 mm thick polyester (PVDF) coated Aluminium sheet all complete as per approved shop drawings and specification (Aluminium frame work will be paid under relevant item)Note: ACMP shall be measured to the actual visible area of the ACP sheet including silicon joints as fixed on site
Filling the gap between aluminium frame & adjacent RCC / Brickwork / Stone work by providing weather silicon sealant of approved quality as per architectural drawings and directionof Engineer-in-charge complete Up to 5 mm depth and 5 mm width.
Providing and constructing Half brick masonry using bricks of approved quality/class, make/brand in partition walls in C.M 1:4 (using crushed sand) including scaffolding, raking out joints, curing etc. complete and with stiffners of RCC 1:2:4 (105 X 75 mm size) at every 900 mm height including form work curing etc. complete as per specifications and as directed by the Engineer-in-charge but excluding reinforcement up to 20 m height. (Note : Reinforcement will be paid under relevant item)
Providing and constructing brick work in cement mortar using Standard bricks of approved quality / class, make / brand in super structure above plinth up to Floor-II level in all shapes and sizes including curing, raking out joints complete as per specifications and as directed by the Engineer-in-charge.....Brick work in Super structure with standard bricks in C.M 1:6 Using crushed Sand
Providing Reinforcement Steel for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with PVC coated G.I binding wire, all labour charges, cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings. TMT bars to be supplied by the contractor confirming to IS: 1786.
Providing 15 mm thick plastering using Readymix internal plastering compound of approved make for internal faces of brickwork /concrete surfaces including preparation of the surface, curing, cleaning, scaffolding complete all as per specifications and as directed at site by the Engineer-in-charge
Providing and fixing Minimum 15-17 mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut Granite of Telephone Black colour for kitchen platforms, vanitiy counters, Wash basin Counters, Door Frames, window sills, facias and similar locations of required size, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edges to give high gloss finish etc. complete as directed by the Engineer-in-charge at all levels
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 of approved make. shade and colour of size ranging from 300 - 600 mm long and 300 mm - 600 mm wide and thickness not less than 6 mm as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (using crushed sand), setting the tiles in cement slurry and pointing the joints with matching colour Tile grout of approved make of matching shade including using PVC tile trim in the exposed corners, complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge.
Providing and fixing double Tubular scaffolding system using H- Frames or (cup lock type) on the exterior side upto seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purposes. The payment shall be made once irrespective of duration of scaffolding.
Lead charges for lead exceeding 2 Km but not exceeding 3 Km, by mechanical transport including loading, unloading, stacking/levelling etc. Note : The rate in respect of this item is applicable for the NET Quantity arrived at after making deductions for voids @ 30% in respect of debris from the corresponding STACK / TRUCK measurements. Debris Beyond 2 Km but up to and including 3 km
Supplying man power along with necessary pans, spades, shovels pickaxe, punjas, ropes, small special spade, raincoats, safety shoes, etc. minimum two number of labour per day upto maximum any number of labour as and when decided by Project Engineer to work for eight hours per day or monsoon period to carry out the cleaning of choked drains grating grills/hume pipes /footpath by removing the dry leaves, silt etc. and also carry out seasonable departmental work allotted by Project Engineer from time to time.
Providing, supplying and fixing Venetian Vertical Blinds with all accessories and fabticating to required sizes etc as per approved design and approved Fabric complete all as directed by the Project Engineer.
Removing the damaged PVC Flooring carefully including removing the resins sticking on the floor, cleaning the floor carefully stacking the serviceable materials at places shown and disposing the unserviceable materials within 50 m lead at places shown complete as directed by the Engineer-in-charge.
Providing and Fixing Homogeneous 2.00 mm thick PVC sheet / tile in flooring and skirting of approved make in approved pattern on a smooth and damp proof base using rubber based adhesive of approved quality and manufacturer including, levelling small undulations with plaster of paris if required, rolling with light wooden roller weighing about 5 kg all complete as directed by Engineer-in-charge in approved colour and shade
Carring out manual misc carpenrty work like minor repairs, fixing departmental fitting & fixures etc. as and when required and as directed by project engineer. Note: 1. Labour should carry necessary carpentry tools 2. The payment shall be made as per the log book duly approved by the Engineer In-charge.....Skilled carpenter
Providing and fixing 25 mm thick Colour PVC Integral Sheet door shutters flush door of approved colour, of approved make or equivalent, design, colour and fixing with 4 Nos 100 mm (ISI marked) stainless steel hinges, Fixing of Stoppers, tower bolts, baby latch, aldrop, handles etc.wherever required with S.S. screws (Stopper, Tower bolt, Baby latch, Aldrop, Handels etc Shall be supplied by department) etc. complete as per specifications and as directed by Engineer-in-charge. Note : The door should satisy the following technical parameters as under: 1. Density : 0.475 to 0.55 g/cc, 2. Hardness (Shore 'D'): min. 55, 3. Water absorption : max. 1 %, 4. Tensile strength : min. 13 MPa, 5. Elongation : min. 15 %, 6. Flextural Strength min. 30 MPa, 7. Compressive Strength at 10% Deformation : min. 3 MPa, 8. Vicat Softening Temperature: more than 75 Deg Celcius 9. Flammability: classification B : S3 : D0 (to be tested as per NF EN 13501-1 standard)
Providing and fixing Lay in False Ceiling 600 x 600mm unperforated corrosion resistant aluminium magnesium alloy metal panel fixed in 24 mm 'T' Frame work of Module 600 x 600 mm. Panels shall be of approved make and size 575 mm x 575 mm and of approved colour in 0.70 mm thick Aluminium Alloy 3105 with square edges Tiles to be stove enamelled on a continuous application for pre-treatment. The coils to be go through 4 stages of pre treatment Three times of oven baked through conversion coating, priming and finish coat ensuring superior adhesion, high corrosion resistance and good colour stability.The coils to be painted on both sides after degreasing. Inside surface to have a primer of 5 microns and a coat of natural colour of 5 microns, exposed surface to have a primer of 5 microns, binder of 5 microns and a top coat of approved colour 15 microns. Grid system for fixing ceiling tiles shall comprise of tees. 'The 24 mm main tee runers shall be suspended at an interval of 1200 mm centre to centre. The 24 mm cross tee runner shall be suspended at an interval of 600 mm centre to centre and further supported with 24 mm cross tee with inter locking arrangements to form a Grid of 600 mm x 600 mm. The main tee shall be supported by means of 4 mm G.I.rod from slab / roof. The suspension shall be provided at 1200 to 1500 mm centre to centre.provision for lights, diffusers etc to be made including extra supports wherever necessary. Measurements shall be as per actual area of false ceiling with out deductions for lights and diffusers.
Providing and applying French spirit polishing for wooden sufaces with two coats on new works including a coat of wood filler to form a uniform neat finish as directed by the Engineer -in-charge and / or as per the specifications complete as directed by the Engieer-in-charge
ELEGENT ENTERPRISES
stage.html
html • 0.04 MB
techsummary_807661.pdf
PDF • 0.19 MB
BOQ Comparative Chart
xlsx • 0.02 MB
finsummary_807661.pdf
PDF • 0.34 MB
WOET40PKEnterprises.pdf
PDF • 7.12 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .