Retendering for Some civil works in flat no. 01, Himachal building at HRI, Prayagraj

Amount

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete.

Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :Flat back wash basin of size 550x400 mm

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.

Providing and fixing 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan.,wash basin

15mm cement plaster of mix: 1:4 (1 cement: 4 coarse sand)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard sections and other sections of approved IS: 1285, fixing with dash fasteners of necessary filling up the gaps at junctions, with required EPDM rubber/ neoprene shall be smooth, rust free, straight, mitred wherever required including cleat angle, glazing / paneling, C.P. brass / stainless architectural drawings and the directions of paneling and dash fasteners to be paid for Powder coated aluminium (minimum thickness of powder coating 50 micron) kg

Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 125x75x4 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete: 150x10 mm

Providing & fixing Aluminium Handle size 125 mm

Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile with both side decorative finish. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer , all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5mm C sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8 mm complete as per manufacturer's specifications including hardware fitting (handle, tower bolt etc.).

Supply & fixing of 304 grade glossy finish stainless steel sink of size (18" x 24" x9") in the existing space of kitchen for sink with some modification including required accessories with drainage connection all complete as per direction of Engineering-in-charge

Providing and fixing CP Brass 32mm size waste couppling of approved quality & make and as per the direction of Engineer-in-charge.

Providing and fixing wire gauge in shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows

Supply & fixing of white vitreous china European type water closet pan with P/S trap (make Cera, Parryware)and white sheet cover including dismantling and cleaning of area of old Indian type water closet, rising the connecting pipe, filling down portion with cement concrete 1:2:4, converting kota stone floor with ceramic tiles (make Kajaria / Somany), providing and fixing of Nahani trap with C.P. Greating including required 3" PVC pipe for drainage and supply & fixture of two way tap (make Jaguar or equivalent) including health faucet (make Cera or equivalent) all complet job work. Size of floor area around 1.5sq mtr.

Providing and fixing CP Brass center hole basin mixture of approved quality & make and as per the direction of Engineer-in-charge.

Removing of two old iron door frames and shutters including repairing the damage portion of wall with 1:4 cement mortar including painting etc.

SURYA PRAKASH MISHRA