RENOVATION AND MODERNIZATION OF THIRD FLOOR OF ADITYA TOWER FOR SETTING UP OF ASSAM REAL ESTATE APPELLATE TRIBUNAL (REAT) AT G.S. ROAD GUWAHATI.

Amount

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 15.7.4 In cement mortar

Dismentling old plaster or skirting............... 15.56 In cement mortar

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 15.12.1 Of area 3 sq. metres and below

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 15.23.1 For thickness of tiles 10 mm to 25 mm

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: 6.2.1 Cement mortar 1:4 (1 cement : 4 coarse sand)

20 mm cement plaster of mix : 13.3.1 1:4 (1 cement: 4 fine sand)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 4.1.5 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 11.41.2 Size of Tile 600x600 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 11.56.1 Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent

Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills,diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a erimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, rawings and as directed by Engineer-in-Charge.

Providing and laying Gypsum panel partitions 100 mm thick with water proof Gypsum anels of size 666x500x100 mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturer’s specifications in superstructure above plinth level up to floor V level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content 3.85.3 With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. 13.83.2 Two coats

Finishing walls with textured exterior paint of required shade : 13.110.1 Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). 9.1.2 Sal wood

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 9.20.1 35 mm thick including ISI marked Stainless Steel butt inges with necessary screws

Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in-charge.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 9.97.1 300x10 mm

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete

Providing and fixing glazed door and fixed glazing (full height glass partition) with 12 mm thick toughened glass of approved make with all SS patch fittings (Hettich/ Haffele/ Dorma) or equivalent make, Items to be include floor springs, lock, 600 mm long D- handles and other necessary hardware of Stainless Steel of make Hettich/ Haffele/ Dorma/ Or equivalent makes all complete as directed and specified.

Providing, making, fitting and fixing in position 12mm thick Bison cement board (cement bonded particle board) on both faces of the Partition of the 50mm x 50mm Sal Wood frame of horizontal and vertical member of same size 50mm x 50mm sal wood batten members spaced at not more than 600mm apart , with necessary screws, washers, bolts & fasteners etc. to be finish with putty and painted with all 3 coats of approved emulsion paint will be paid separately as approved finish as necessary as directed by the Department for all levels.

Providing making and fixing 1200/1800/2400mm high Storage of 450mm depth, made with 18 mm MR grade plywood with 400mm deep 6 no's of shelves at as per detail throughtout the width of storage. The external surfaces of plywood to have 1mm laminate finish as well as on all inner faces of approved make. Rate to include 100mm high laminated skirting, grooves and all hardwares, good quality SS handles, ss hinge, multipurpose lock etc. all complete. All exposed edges of plywood to be lipped with 6mm / 4mm TW lipping as complete. (Laminate Base rate = Rs 48 per sft)

Providing, making, fitting and fixing wall lining / 1.5mm thick Laminate finish Panelling, 4mm thick BWP ply pasted on 9mm BWP ply of approved makes and sizes, on top of 50mm x 50mm hollock wood frame, spaced at not more than 600mm apart , with necessary screws, washers, bolts & fasteners etc. wall ling to be finished in 1 mm thick laminate of aproved makes and shade as approved as directed by the Department for all levels.

Making and fixing 600mm x 600mm Trap Doors in suspended gypsum false ceiling including hinges, magnet catchers periferal 50 x 50 mm wooden frame etc complete as directed & specified by the department.

Providing and fixing 6mm polished Mirrors - For toilets as per drg. Rate to include 12mm backing ply, fixing with 3m double side tape, laminated or polished wooden frames as reqd.

Supply fitting and fixing 12mm thick High pressure laminate toilet modular partition system, supported by overhead bracing and 304 grade SS supporting legs screwed to the floor with SS fasteners etc and clamps/fasteners to the adjascent wall. The item included door lock, coat hook, door stoper, tissue roll holder, knob/handle etc. complete and directed as specified. Door size 750mm x 1800mm (above thoe hollow level)

Providing,fitting and fixing Carpet tiles of size 600x600mm with thickness not less than 4mm made of 100% Olefin Polypropleyne material,with dual backing; Primary backing with PVC and Secondary with Reinforced Fibre glass of Armstrong or euronics or equivalent brand, laid on existing concrete floor complete including skirting as directed and specified

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.3.1 W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. 17.19.2 10 litre (full flush) capacity-coloured

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge (a) 15 mm nominal dia

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 18.50.1 15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 18.52.1 15 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 18.7.2 20 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 18.7.1 15 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 18.9.9 100 mm nominal dia Pipes

18.9.8 80 mm nominal dia Pipes

Providing and fixing Fire Extinguishers (A, B, C type powder) complete with all accessories as per manufacturers specifications.IS: 15683. Capacity 2 Kg

Capacity 6 Kg

ISI marked (IS: 15683) portable fire extinguisher Mech. Foam type capacity 9 litres with gunmetal cap and nozzle and complete in all respects including initial fill and wall suspension.

ISI marked (IS:16018) Fire and wall suspension bracket, Extinguisher, Trolley mounted carbon-dioxide type capacity 22.5 Kg. Flat base including valve, discharge hose of not less than 10mm dia 1m long complete in all respects including wheeled trolley, carrying handle and initial fill with CO2 gas as per IS: 307-1996 filled to a filling ratio of not more than 0.667.

Providing and fixing 25 mm dia inspection & testing assembly with gunmetal valve sight gas, valve & connected to drain line.

Providing and fixing dial type pressure gauge with isolation cock and copper pipe on main header Dial diameter 100 mm celebration 0-14 / sq. cm.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Wiring for group controlled (looped) light point/ fan point/ exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the follwing sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recess medium class PVC conduit as required. 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earth wire

2 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire

2 x 6 sq.mm + 1 x 6 sq.mm earth wire

2 x 10 sq.mm + 1 x 6 sq.mm earth wire

2 x 16 sq.mm + 1 x 6 sq.mm earth wire

4 x 2.5 sq.mm + 2 x 2.5 sq.mm earth wire

4 x 6 sq.mm + 2 x 6 sq.mm earth wire

4 x 10 sq.mm + 2 x 6 sq.mm earth wire

4 x 16 sq.mm + 2 x 6 sq.mm earth wire

Supply & drawing of following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 1x 1.5 sq.mm.

2x 1.5 sq.mm.

3x 1.5 sq.mm.

2x 2.5 sq.mm.

Supplying and fixing of two module Stepped type electronic fan regulator on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Supplying & fixing of 3 pin, 5A ceiling rose on the existing junction box/ wooden box including connection as required, (for Exit signage etc.)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

TV antenna socket outlet

Bell push

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1or 2 module (75mmx 75mm)

3 Module (100mmX75mm)

6 Module (200mmX75mm)

8 Module (125mmX125mm)

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supplying and fixing 20 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable

2 run of cable

3 run of cable

Supply and drawing of Co-axial TV cable RG-6 grade, 0.7mm solid Cu. Conductor PE insulated, shielded with fine tinned Cu. Braid & protected with PVC sheath in exisiting surface / recessed steel/ PVC conduit as reqd.

Supplying, installation, testing and commissioning of Passive Infrared(PIR) technology based occupancy sensor having high preformance, non regulating programmable type, suitable for connected load upto 10Amp, for mounting height up to 2.8 mtr and for 5 m diameter coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. (for fibre/ tel./cable by service provider) 63 mm dia (OD-63 mm & ID-51 mm nominal)

90 mm dia (OD-90 mm & ID-76 mm nominal)

Supplying and fixing RJ45 Data outlet in the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Supplying and fixing RJ11 Voice outlet in the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Supply, erection, testing and commissioning of splitter/ Tap-off terminals for Co-axial cables in suitable size of G.I. Boxes with hinged lockable cover complete. Four way Splitter (S4)

Supplying and fixing following way, single pole and neutral, sheet steel MCB distribution board, 240 V, on surface/ recess, complete with tinned copper busbars, nrutral bus bar, earth bar, dinbar, interconnections, powder painted including earthing etc. as required.(But without MCB/RCCB/Isolator) 6 way, double door

8 way, double door

12 way, double door

Supplying & fixing following way, Horizontal type three pole & neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper busbar, neutral bus bar, earth bar, dinbar, interconnections powder painted including earthing etc. as required.(But without MCB/RCCB/Isolator) 6 way (4+18) double door,

8 way (4+24) double door,

Supplying and fixing of following ways, surface/recess mounting, vertical type, 415V, TPN MCB distribution board of sheet steel, dust protected, duly powder coated, inclusive of 200A tinned copper busbar, common neutral link, earth bar, dinbar for mounting MCBs (But without MCBs and incomer) as required. 4 Way(4+12), Double door

Supplying & Fixing of following rating double pole (single phase and neutral) 240 volts, Residual Current Circuit Breaker (RCCB), having a sensitivity current upto 300 milli-amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25 Amps

Supplying & fixing 5A to 32A rating, 240/415 V, 10kA, "C" curve, Miniature Circuit Breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole

Double Pole

Triple Pole

Supply & fixing of single pole blanking plate in the existing MCB DB complete etc. as required

Supplying and fixing following rating, double pole, 240 V, Isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40A

Supplying and fixing following rating, four pole, 415V, Isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40A

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 100 A, 16 KA,TPMCCB

Supplying, installation, testing and commissioning of indoor Recess mounted square / round shaped LED Downlights luminare CRI not less than 70, built in electronic driver (THD<10%, HF-P) complete with all accessories as er approved makes mentioned else where in the tender document i/c connection with 3 x 1.5 sq. mm FRLS PVC insulated copper conductor single core cables etc. as required. Surface/ Recessed mounted 44 Watt LED luminiare (2'X2') complete with reflector and accessories as required. (Philips Cat. No. RC740B LED 36S/865 W60L60 PSD WH or approved makes), for Offices etc.

Recessed mounted 30 Watt LED luminiare (2'X2') complete with accessories as required. (Philips Cat. No. RC380B LED 25S/865 W60L60 WH or approved makes), for Storage & Records area).

Recessed mounted 20 Watt LED Round Type Down Light Luminaire complete with accessories as required. (Philips Cat. No. DN 195 B LED 20S-6500 PSU WH SI or approved makes), for corridors).

Surface mounted 15 Watt LED luminiare complete with accessories as required. (Philips Cat. No. SM200C LED16S 6500 PSU OD WH or approved makes), for Corridors.

Surface mounted 10 Watt LED luminiare complete with accessories as required. (Philips Cat. No. SM200C LED10S 4000 PSU OD WH or approved makes), for Toilets

Surface mounted 20 Watt Batten type LED luminiare complete with accessories as required. (Philips Cat. No. BN021C LED20S PSU NW GR or approved makes), for Rooms

Surface mounted 10 Watt Batten type LED luminiare complete with accessories as required. (Philips Cat. No. BN021C LED10S-4000 PSU GRS1 or approved makes), for Mirror Light

Surface mounted water proof 40 Watt LED luminiare complete with accessories as required. (Philips Cat. No. WT550 C LED 40S CW PSU S1 PC or approved makes), for Kitchen & Laundries.

Surface mounted 6 Watt LED Bulk head luminiare complete with accessories as required. (Philips Cat. No. WT202W LED6S NW PSU S2 PC or approved makes), for Terrace lighting.

SITC of 300mm Heavy Duty exhaust fan with metal blades and bird screen for protection i/c connection with 3 core PVC insulated flexible coppeer wire etc as reqd. (Havells Turbojet SP or approved makes)

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Supplying Installation, testing and commissioning of 1400mm 5 star rated ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supply Of Self Contained Rechargeble LED Emergency Egress Routes Maintained type, Wall mounting Type, multi LED illumination on normal as well as mains failure on self contained battery source. ON resumption of mains supply, the lamp switches back to the mains automatically and simultaneously starts recharging the battery to the requred level, Escape Route Light with LED lamp Fitting with 3 Hours backup with Ni-Cd / Ni-Mh, Directional as required, 22 MS C.R.C.A. Fabricated, Epoxy polyester powder coating, White in colour, 2 m.m. thick milky acrylic with vinyl pasted on it, with 16 to 24 hours Recharging period with constant current charger. Input - 230V 50 HZ ,Confirms to IS: 10322, Ref PROLITE Autoglo Model -PEL LED Wall Mounted A.D. or equivalent.

Supply Of Self Contained Rechargeable LED Emergency Egress Routes Maintained type, Surface mounting Type, on normal as well as mains failure on self contained battery source. ON resumption of mains supply, the lamp switches back to the mains automatically and simultaneously starts recharging the battery to the required level, LED Exit Light with Less 5W LED Fitting with 3 Hours backup with rechargeable Ni- Mh/Ni-cd battery, Made up of uniformly extruded, aluminum alloy, Epoxy polyester powder coating/ White in colour CAD Designed printing on 8 M. M. clear acrylic sheet, with16 to 24 hours Recharging period with constant current charger, Input 230V 50 HZ confirms to IS: 10322 , CE certified, ROHS certified. Ref PROLITE Autoglo Model- PEL LED Sleek Type A.D. or equivalent.

Cu. earth plate electrode Earthing with Cu. earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/coke and salt as required.

Providing & fixing 25 mm X 5 mm Cu.strip on surface or in recess for connections etc. as required.

Supplying and fixing of non-skid rubber mat 2.5mm thick Class B and 1000mm width confirming to IS 15652/2006 (ISI MARKED)as required including cutting to required lengths of approved make with Test Certificates suitable for 1100 Volt

Supplying and fixing of shock treatment chart written in English and Hindi duly framed in as required.

Supplying and fixing of 2 kgs. Capacity ABC dry powder type fire extinguisher of ISI approved make with wall mounting bracket as required.

Supplying and fixing of first aid box as approved complete with standard kit as prescribed by Indian Red Cross.

Laying of one number PVC insulated & PVC sheathed/ XLPE power cable of 1.1 KV grade of following size in the existing Masonary open Duct as required. Upto 35sq.mm

Above 35sq.mm.and upto 95sq.mm

Laying of one number PVC insulated & PVC sheathed/ XLPE power cable of 1.1 KV grade of following size on Cable Tray as required. Upto 35sq.mm (clamped with 1mm thick saddle)

Above 35sq.mm.and upto 95sq.mm (clamped with 25X3mm MS Flat Clamp)

Supplying & making of end terminations with brass compression gland and Al. lugs for following sizes of PVC insulated and PVC sheathed/ XLPE Al. conductor cable of 1.1 KV grade as required. 3.5C x 95 sq.mm.

3.5C x 25 sq.mm.

Supplying and Installing following size of perforated Hot Dipped Galvenised Iron Cable Tray (Galvanisation Thickness not less than 50 microns) with perforation not more than 17.5%, in convinient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including GI bolts & nuts, etc. as required. 150 mm width x 50 mm depth x 1.6 mm thickness

Supplying and Installing following size of perforated Hot Dipped Galvenised Iron Cable Tray "bends" (Galvanisation Thickness not less than 50 microns) with perforation not more than 17.5%, in convinient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including GI bolts & nuts, etc. as required. 150 mm width x 50 mm depth x 1.6 mm thickness

Supply of following sizes of XLPE/ PVC insulated Aluminum/ Copper conductor strip/ wire Armoured, overall PVC sheathed 1.1 KV grade cables conforming to relevant IS code and technical specifications. XLPE insulated Al. Ar.Cable 3.5C x 95 sq.mm.

3.5C x 25 sq.mm.

Supply, installation, testing and commissioning of 5 KVA UPS, 1 phase input (220 V +15%/ -25%), 1 phase output (220 V + 0.5%) with 30 minutes battery backup. UPS shall be 6 Pulse rectifier + Filter + SPWM & IGBT Inverter based system, complete with sealed mainteneance free lead acid batteries including battery rack and connecting wires of suitable size as required for each UPS.

Supplying, installation, testing & commissioning of heat detector operating at 54ºC/57ºC with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connection etc. as required.

Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.

Supplying, installation, testing & commissioning of manual call box of ABS type in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.

Supplying, installation, testing & commissioning response indicator on surface/recess MS box having two LEDs metallic cover complete with all connections etc. as required.

Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in A.B.S. box with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as amplifier i/c line matching transformer etc. complete as required.

Supplying, installation, testing & commissioning talk back slave station in surface/recess suitable for operation on simplex mode complete with P.T.T. knob & speaker/microphone enclosed in a M.S.(16 SWG)/ ABS box with break glass in front etc. complete as required.

Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. Total of Sub-Head - 9 : Conventional Fire Detection & Alarm System (DSR Items) Sub Head - 10 : CCTV (DSR Items)

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable

2 run of cable

3 run of cable

Indoor Dome Camera Supply, Installation, Testing and Commissioning of 2 MP IR Varifocal Dome Network Camera with 1/2.8" Progressive Scan CMOS,1920 × 1080@30fps,2.7 to 13.5 mm varifocal lens,Color: 0.01 Lux @ (F1.2, AGC ON),0.018 Lux @ (F1.6, AGC ON), 0 Lux with IR,H.265+, H.265, H.264+, H.264, Three streams,120dB WDR

Indoor/ Outdoor Bullet Camera Supply, Installation, Testing and Commissioning of 22 MP IR Varifocal Bullet Network Camera with 1/2.8" Progressive Scan CMOS,1920 × 1080@30fps,2.7 to 13.5 mm varifocal lens,Color: 0.01 Lux @ (F1.2, AGC ON),0.018 Lux @ (F1.6, AGC ON), 0 Lux with IR, H.265+, H.265, H.264+, H.264,Three streams,120dB WDR

NVR Supply, Installation, Testing & Commissioning of 32 Channel Network Video Recorder with Supported Image Format H.264 , H.265, MPEG−4,M−JPEG; N+1 supported with Raid 5

Storage Supply, Installation of Surveillance HDD Storage in NVR:- NVR storage as required and the storage capable of storing 30 days recording at 20 fps, minimum 720p resolution, storage should be easily scalable w/o obstructing the functionality of system or losing the data. Full redundancy is required on NVR's and Storage, Note:-Bidders to provide complete calculation of the storage to show that total storage is able to provide 30 days recording at above parameters.

Workstation PC Supply, installation, Testing and Commissioning of client workstation consisting of Pentium core i7 processor, 21" colour LCD/LED monitor, 4x2048 MB RAM, 1 TB Hard Disk, DVD Drive, USB Port, Ethernet port, optical mouse, multimrdia keyboard, Latest Windows OS, Dedicated Graphic Controller including copy in CD ROM complete with all statndard accessories as required.

Supply installation testing and commissioning 43-INCH Color LCD CCTV MONITOR 24x7 operation for viewing complete as required.

Supply, installation, testing & commissioning of CAT 6- RJ 45 Connector for CCTV

Supplying including installation, testing and Commissioning of 2.0 Tr Cassette AC coplete including Connection as required (Rate as per analysis enclosed)

Supplying with installation, testing and commissioning of 1.5 Tr. High Wall, 3 Star Rating non ducted Split Type Air Conditioner with cordless remote complete with copper pipe (Upto 5.0 metre between the room unit and outdoor unit) including electrical connection as approved by the department (Voltas/Carrier/ Bluestar/ Daikin Make)

Supplying with fitting and fixing Voltage Stabilizer of the following specification complete including making necessarry connection as approved, specified and directed by the department.(Skyland/Vee-Dee/V-Guard/Vertex/Indo/Venus Make) 4.0 KVA,110 V-280 V Stabilizer

SUBHASH CH. PATHAK

S.B. ENTERPRISE

Solitaire Enterprise

UTPAL JYOTI KALITA

Bikash Enterprises