PETTY REPAIRS AND DAY TO DAY MAINT OF MD AND OTM ACCN UNDER AGE B/R CENTRAL, GE DEOLALI

Amount

Note: (i) Contractor's supervisor will report on all working days along with carpeneter,plumber, mason,welder 0830 hrs at B/R Central to receive complaint for plumbing,carpenter works,masonry works,welding ,sewage and to submit completion report on the same day by 1700 hrs. (ii) Printed complaint slip area wise as per format approved by Engineer-in-Charge shall be provided and maintained by contractor. (iii) Rate quoted above shall be deemed to incl the cost of T&P, equipment, saftey device etc alongwith sufficient labour to full fill the requirement to the entire satisfaction of Engineer-in-charge. (iv) Cost of labour for providing new items including replacement /Demolition/ dismantling/ taking out/down of old unserviceable item shall be deemed under respective item. (v) Cost of material shall be measured and paid separately under relevant items 2 to 138 complaint delayed morethan 48 hrs Rs1000/- recovery has been made for each complaint per day (vi) No seperate payment paid to any tradesmen and supervisor (vii) All below maint work sites will be handed over in piece meal/patches in any qty and size for execution of the work without damaging the undamaged portion as per user requirement. (viii) For the emergency work like water tanks, plumbing fittings etc which effects basic needs will be advanced procured by the contractor and fixed on emergancy basis on short notice.

Dismantling / taking down 15 mm dia bib cock ,angle cock,wall mixture of any pattern or of any type and re-fixing the same after minor repairs such as replacement of washers etc or refixing old serviceable bib cocks/ stop cocks any pattern (any major parts such as jumpers brass/ spindles/ caps etc to be replace accordingly)

Petty repair to high or low level flushing cistern by adjusting the float valve leaking of PVC connection, PVC bend including replacing of rubber washer check nuts plunger etc any type of flushter carrying out minor repairs such as stopping of leakage etc and refixing the same complete all as directed.

Supply and fixing in repair bib cock PTMT standard 15 mm dia with capastan head , Make 'Prayag/Polytuf' complete male or female as reqd and as directed by Engineer Incharge

Supply and fixing in repair bib cock brass chromium plated 15 mm dia with capastan head, screwed down high pressure. Make Cera/hindware/parryware or Equivalent complete

Supply and fixing in repair TWO WAY bib cock brass chromium plated 15 mm dia with capastan head, screwed down high pressure. Make Cera/hindware/parrywarepattern or Equivalent complete

Supply and fixing in repair CP stop cock/angle cock 15 mm dia fancy type, screwed down high pressure complete. Make : Cera/hindware/parryware

Supply and fixing stop cock PTMT standard 15 mm dia with capastan head , complete male or female as reqd and as directed by Engineer Incharge. Make : Prayag, Polytuf

S & F 20 mm bore stop valves, in repair cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iorn pipe or for unions and fixed completed all as specified. Make : Cera/hindware/parryware

S & F Stop Valve Concealed Type in repair 15 mm Cast Copper Alloy fancy type, Chromium plated with long shank and cup, high pressure, screwed both ends for iron pipe or for unions and fixed Make : Make : Jaquar/Roca/Kholar/Grohe

S & F in repairs Sink mixer 15mm dia, Brass Chromium plated complete all as specified Make : Cera/hindware/parryware

S & F in repairs centre hole basin mixer 15 mm dia, Brass Chromium plated complete all as specified Make : Cera/hindware/parryware

S&F in repairs CP(3in1) mixer for mixing (HOT/COLD) water , with wall cap of CP Brass, screwed down, screwd for iron pipes 15mm bore complete all as specified and directed. Make : Cera/hindware/parryware

Supply and fixing in repairs 15 mm bore Pillar cocks chromium plated brass with capstain head screwed down high pressure Dura pattern half turn Cat No 2001 or Equivalent complete Make : Cera/hindware/parryware

Description all as per serial No 14 here-in-before but with Swan Neck 15 mm size complete Make : Cera/hindware/parryware

S & F in repair 125mm Dia CP Brass chromium plated shower rose 125mm size 15 mm bore pipe complete all as specified. Make : Cera/hindware/parryware

Supply and fixing in repair Waste fittings 32 mm for WHB , brass chromium plated for glazed ware sinks, basins etc. ware sinks with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed

S & F PVC Connections 15 mm size with brass nuts of length 450 mm Make: 'Prayag' or Equivalent

S & F PVC Connections 15 mm size with brass nuts of length 600 mm Make: 'Prayag' or Equivalent

S & F PVC Connections 15 mm size with brass nuts of length 900 mm Make: 'Prayag' or Equivalent

S & F in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor and fixed complete all as specified.Somany/Hindware/Cera

S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white including Plastic water closet seat, black, closed pattern with flat bottom, cover and mild steel chormium plated or aluminised hinging device.Make Somany/Hindware/Cera

S&F in repairs vitreous china rimless single piece WC of Size: 380x700x665 mm, Single Piece WC with PP Soft Seat cover, Hinges, Fixing Accessories, Accessories Set, and Cistern fittings, P trap-180mm complete all as specified and directed Make Jaquar cat part No ONS-WHT-10853S300UFSM or equivalent in kohlar, grohe and Roca

S&F in repair vitreous china to wall hung EWC Bowl with cistern for Extended Wall hung-WC with PP soft close seat cover, Hinges, Fixing Accessories and Accessories set WC of size: 380x630x770 mm with UF soft close slim seat cover, hinges, fixing accessories ,fixing to flushing ceistern complete all as specified and directed Make Jaquar cat part No CNS-WHT-353SPPZ or Eqvl in Kohler/Roca/Grohe

S & F in repair Vitreous China wash hand basin, white, flat back, size 550 x 400 mm including waste coupling and waste up to floor trap and fixed complete all as specified.Make:Somany/Hindware/Cera

S&F in repair vitreous china Wash Basin counter Top 600x400x185mm including stainless steel bottle trap and 40 mm dia GI pipe up to Floor trap complete all as specified and directed by Engr-in-Charge Make : Cat Part No SLS-WHT-6601 & ALD-769L250x190 of Jaquar or equivalent in kohlar, grohe and Roca

S&F in repair fancy type Toilet paper holder, steel chromium plated approximate size 140X140X50mm complete all as specified and as directed.

S&F in repair PVC valveless flushing cistern, low level white with inlet ball valve float and handle including brackets complete fixed capacity of flush 10 ltrs complete all as specified and as directed.Make Jaquar/Roca/Kholar/Grohe

Description all as per serial item No 28 here-in-before but dual flush type Make 'Prayag' Cat No 502 and equvelent fixed complete all as sfd.

S & F in repair Flush Pipe of polyethylene of low or high density or PVC, 32 mm dia, for low level cistern and fixed all as specified.

S & F in repairs plastic water closet seat cover, white for EWC/Anglo indain, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and fixed all as specified.

S & F in repair PVC Waste Pipe 32 to 40mm for WHB/Sink up to floor trap and fixed complete all as specified.

S&F in repair 25mm dia 1 to 1.5mm th stainless steel curtain rod with fancy type including funnelsfixing brackets, stops, rollers, sides knobs etc. complete all as specified and directed by Engr-in-charge.(Note:Brackets shall be measured and paid separately)

S&F SS heavy duty decorative brackets suitable for 25mm dia curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed. Note: Curtain rod shall be measured and paid separately

S & F in repairs Tubular towel rail 600mm long , 20 mm dia, Brass Chromium plated complete all as specified Make : Prayag/Ess Ess/Sieko/Prima/KS

S&F in repairs Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connection and fixed in position fixed in repairs complete all as specified. Make : Somany/Prayag/ Ess Ess

S & F in repairs Jet spray with 1.50 m tube Make 'Prayag' Cat No 522 for wash down water closet (pedestal pattern) and fixed complete all as specified and directed.

S&F in repairs stainless steel(304 grade) wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire in all window(alluminium,steel,wooden) doors etc stapples complete all as specified and as directed.

S&F in repairs galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with galvinised wire stapples complete all as specified and as directed.

Taking down steel rolling shutters/garage shutter exc 4.0Sqm but n exc 20.0Sqm each and refixing in same opening after repairing of hold fast, hinges, greasing,bed block/wall etc complete all as specified and directed.

S&F in repair MS Rat tail pattern/ helical doors spring 250 mm, ordinary springs including roller and roller plate welding with MS chowkhats complete all as specified and directed.

S&F in repair 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified and directed.

Supply and fixing in repairs 200 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

Description all as per serial item No 44 herein before but 150 mm long

Description all as per serial item No 44 herein before but 100 mm long

S&F in repairs 150 mm long Aluminium handles, fabricated type, anodised and fixed complete all as specified

S&F for in repairs Aluminium (Die cast) body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and as directed.

S & F in repair 100 mm long Hasp and Staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws and fixed complete all as specified.

M & L in repair Plain fillets 2nd Class hardwood not exc 3 sq. cm, square, rectangular or triangular in section, chamfered or rounded on one edge or face, secured with nails and fixed complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads and fixed all as specified.

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square of any size pane and fixed all as specified.

Description all as per serial item No52 here-in-before but frosted glass complete all as specified.

Re securing glass of any description in existing metal frames, glazed with putty/beads including removing loose/decayed putty/beads, painting/oiling one coat on rebates, grooves, re puttying and painting/oiling puttied surfaces to match existing work (New length of frame/beading/ re puttied shall be measured).

Demolition of brick work or stone/boulder masonry built in CM on cement lime mortor and removing rubbbish of out side MoD land complete all as specified and directed.

M&L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed.

Taking down cement plaster any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for Rendering in 15mm on brick work or concrete surfaces etc finished surfaces even and smooth complete all as specifed and directed.

M&L for preparing new plastered or unplastered surfaces of walls, and applying two coats of oil emulsion distempering over a coat of interior wall primer complete all as specified and directed.

M&L for 1.5mm thick wall care putty on wall complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying two coat of cement based paint over a coat of primer complete all as specified and directed.

S&F for in repairs brass knobs 35-40mm dia complete all as specified.

Taking up or down 15 mm Bore steel tubing and connections, including cleaning.

S&F for 15 mm Bore Steel Water Tubing 'Medium Grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors.

Fixing only 15mm bore tubes, any grade, to walls and ceilings or laying in floors

Taking up or down 20 mm Bore steel tubing and connections, including cleaning.

S&F for 20 mm bore Steel Water Tubing 'Medium Grade' galvanised, with all fittings and fixed complete to walls and ceiling or laid in floors.

Fixing only 20mm bore tubes, any grade, to walls and ceilings or laying in floors

Supply and fixing in repairs PTMT Ball valves 25 mm bore, high pressure with epoxy coated Aluminium rods & high density plastic ball screwed and fixed complete all as specified and directed. Make Prayag/Polytuf/ Ess Ess

Description all as per item No 69 here-in-before but 20 mm size complete

S&F in repair PVC Knob/Handle (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as directed.

S&F in repair covers for PVC over head water tanks 300/500/1000 ltrs capacity (as per sample) complete all as directed.

S&F in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical top) hoisted and fixed in position complete 500 litre capacity.

S&F in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical top) hoisted and fixed in position complete 1000 litre capacity.

S&F in repairs CP bottle trap 32 mm size for WHB complete all as specified and as directed.

S&F PTMT grating 100 mm dia with or without waste hole fixed in repairs complete all as specified and as directed.

Supply and fixing in repairs CI lid for inspection hole of CI bend, traps Y junction T junction, etc fixed with nut and bolt, fixed as in repair including removing old nuts by drilling or welding complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L for cement concrete (1:5:10) type E2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and as directed.

M&L for 40mm thick PCC (1:2:4) type B1 (using 20mm grade aggregate) as in flooring/pavement finishing the surfaces even & smooth without using extra cement.

M&L for 100mm thick PCC (1:2:4) Type B1 with 20mm graded stone aggregate as in floors complete all as specified and as directed.

Roof cleaning on non accesseble/acceseble roof like mud/leaf/plants etc remove plants from wall/roof/chajja/drain pipes packed with PCC /plaster and match the existing colour on entire block area of the roof slab n.exc 200Sqm complete all as specified and directed.

Roof cleaning on non accesseble/acceseble roof like mud/leaf/plants etc remove plants from wall/roof/chajja/drain pipes packed with PCC /plaster and match the existing colour on entire block area of the roof slab exc 200Sqm nexc 500 Sqm

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl making good all disturbed portion complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl making good all disturbed portion complete all as specified and directed.

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed.

S&F for 30mm thick flush shutter, solid core construction, with particle board core and plywood face panels, commercial type on both faces including teak wood beading 6mm thick all around complete all as specified and as directed.

S&F 2nd class HW shutters 35mm thick, plain framed panelled shutter factory made (three panel) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 complete all as specified and as directed.

S&F 2nd class H.W. glazed & skeleton shutter 35mm thick factory made open rebated & prepared to receive glass gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass,gauge etc size of members of shutter as specified in SSR part-I , section 8, clause 8.24 (a) complete all as specified and as directed.

S&F Plain, solid, straight chowkhats and frames of 2nd class Hard Wood wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and as directed.

M & L for rolled mild steel work angle iron as in door frame (Chowkhats) including provn of 12mm dia deformed bar welded horizontally to bottom of frame confirming to Fe-290 or Fe-330 including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 50x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete all as specified and as directed.

All as per item No 92 herein above but 65x 125mm double rebate

S&F 28-30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified

S&F factory made 100 % solid prelaminated wood plastic composite (WPC) flush type shutter of 18mm thickness one side laminate consisting of panel of profile of 18mm (+ 0.7mm) thick of denisity 600 kg per cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18mm thick and fixed with frame. The thickness of shutter is edges painted by matching colour of PVC lining of plain/prelim coloured PVC sheet using etc complete as per manufacture specification.Make : ECHON/Sintex/Rajshree/Navratan

S & F 100 mm long Butt hinges,heavy weight ,cold rolled mild steel complete all as specified and directed

S & F 75mm mm long Butt hinges,heavy weight ,cold rolled mild steel complete all as specified and directed

S&F Ball bearing runners Telescopic Channel Length : 500mm (KA4632) full extension load capacity 35 kgs complete all as specified and directed. Make : Item code: 9293319 of hettich or equivalent in butterfly, Hafele

S&F , soft close Crank Door Hinges with Mounting Plates & Cover Capsauto c openable at 110 degree for kitchen cabinet shutters complete all as specified and directed. Make- Onsys 4447i of hetticch or equvelent to butterfly, Hafele

M&L 300 mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed

S&F for Powder Coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc, complete as specified and as directed.

S&F for powder coated aluminium ventilator shutters with frame not less than 0.55 Kg/Rm, half bottom portion fixed with 4mm thick glass with fixed type shutter and top half portion lower type with 4mm thick glass and outer side fixed with stainless steel wire mesh, shutters aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings etc complete all as specified and directed.

S & F powder coated aluminium sections for doors, windows, partition including fabrication of frame and shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, provn of AC opening and rubber beadings for fixing glass panes in frame complete all as specified by Engr-In- Charge. Note : (i) Glass panes/wire cloth will be measured & paid separately . (ii)The quoted rate shall be inclusive of cost of rubber beading and glazing clips,hinges, handle. However it will be not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate. Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India

M&L for Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified.

M&L for 4mm thick tinted sheet glass, ordinary quality and fixed with glazing clips, rubber packing in square in n exc 0.5 sq.m in each pane in each pane complete all as specified and as directed.

Dismantling & Cleaning & removing all scale and dirt etc from tank and from mouth of circulating pipe etc exc 250Ltrs and n exc 500Ltrs capacity complete all as specified.

DismantlingCleaning & removing all scale and dirt etc from tank and from mouth of circulating pipe etc exc 500Ltrs and n exc 1000Ltrs capacity complete all as specified.

S&F of 5mmthick (ACP) aluminium composite panel sheet on wall/coloumn/roof with necessary screws complete all as specified and directed.

S&F of 3mm thick (ACP) aluminium composite panel sheet 150x150mm fixing with screws on walls up to height 10mtr incl 3 to 4 Inches size 3 to 6 letters complete all as specified and directed.

Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and as as directed.

M&L for Glazed ceramic tiles of size 300x600 x 7mm thick (coloured) of superior quality fixed on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry over 10mm thick backing coat in CM (1:4) and pointed in coloured cement to match complete all as specified and directed.

M&L for non skid ceramic tiles of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.18 but n exc 0.38 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for non skid ceramic tiles of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.06 but n exc 0.11 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing complete including screed bed 15mm thick in CM (1:6) with mirror polish complete all as specified and as directed.

All as per item No 114 above, but as in skirting over 10mm thick backing coat in CM (1:4) complete all as specified and directed.

M&L machine cut cudappa stone slab 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for Granite (of any type) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types including 15mm thick screed bed in CM (1:6), complete all as specified and as directed.

M & L for 15 mm thick Artificial Granite (of any type) work steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes complete all as specified.

Mirror polishing on marble/ granite/Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

M&L for chequered cement concrete tiles 30cmx30cmx20mm thick Rubber moulded with grey cement and pigment, over and including 15mm thick screed in CM (1:6), set jointed & pointed in neat cement slurry in floors complete all as specified and as directed.

M&L for precast cement concrete interlocking tiles 60mm thick Rubber moulded with strength 30 N/sqmm as in floor/pavement laid on 30 mm thick stone dust cushioning laid dry to the profile complete all as specified and as directed.

Demolition of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards / slabs / blankets, any thickness, including cover fillets complete all as specified and directed.

S&F 5 to 8 mm thick interlocking PVC hollow false ceiling/wall panelling fixed with self tapping screw over and including GI frame hollow section and hanging wire 2mm of approved colour and design complete all as specified as per manufacturerer instruction and directed by Engr-in-Charge.

S&F for powder coated aluminum alloy interlocking snap grid 600mm x 600mm consists of Main Tee runners of size 38mm x 25mm x 1.5mm and cross Tee of size 25mm x 25mm x 1.5mm, spaced between the main Tee at 600mm centre to centre to form a grid of 600mm x 600mm and wall angle 25mm x 25mm x 2mm fixed to wall perimetrs at 450mm centres and shall conform to IS 733, IS 1285 with and including hangers of 3mm dia. G.I. (upto 1200mm length and 1200mm centres) adjusting level fixed to roof steel members by means of ceilling cleats made out of G.I. flat 40X3 mm size 60mm long etc complete all as specified and directed .

M&L for 4mm thick non asbestos fibre cement building boards of make 'E Board classic designer board (Cascade or Occenic) of M/S Everest industries Ltd or equivalent as approved, fixed or laid/ inserted to timber/GI/Aluminium framework complete all as specified and directed .

S& F urinal spreader complete all as specified and as directed

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

S&F in repairs Capastan head / cap of CP bib tap / CP stop cock 15 mm size complete all as directed by Engr- in-charge.

S&F in repairs spindle CP Wall mixer/CP WHB mixer/CP Sink mixer 15 mm size of any pattern complete all as directed.

S&F in repairs spindle of CP bib tap / CP stop cock 15 mm size complete all as directed by Engr- in-charge.

S&F in repairs cap of CP Wall mixer/CP WHB mixer/CP Sink mixer 15 mm size of any pattern complete all as directed.

Dewatering of following including disludging of sluldge at bottom in foul condition including taking out other dirty & filthy materials from manhole & septic tanks by sewage pump or manually using buckets/baskets, lifting the same upto 4.50M depth of tank/MH and removing to out side MD land including cleaning/clearing for following :-

(a) Manhole of any dimension upto 1.5 Mtr deep

(b) Manhole of any dimension exc 1.5 Mtr but n exc 3 Mtr deep.

Cleaning of SWG/RCC Sewage line of 75 to 200mm bore dia of pipe of foul condition by rodding the drain/sewage line using flexible rod/suitable device or by any other means for removing blockage from sewar line, mud, silt and any other debries obtained from sewage line with water to remove blockage and cleaning the entire rubbish, sludge etc and burrying the material obtained from sewage line including all precautionery and safety measures etc complete all as specified and directed.

Removing blockage from water closet, floor or gully or Nahani Trap traps and bends by rodding thoroughly and pouring water under pressure and Cleaning, clearing the drainage to efficient and Smooth flow of sludge/waste water all as specified and directed by Engineer-in-Charge.

M&L for Running welding with thickness of metal to be welded exc 6mm but not exc 9mm all as specified and directed by Engr-incharge.

M/S SAMEER SUBHASH PATANI (BID ID -3461998)

J Sams Contructions (BID ID -3462027)