CERTAIN MISC B/R MAINT/REPAIRS TO OFFRS, JCOS, ORS AND OTM ACCN AT OG LINES OF AGE B/R H/L UNDER THE AOR OF GE DEOLALI

Amount

Dismantling of stone slab and tiles laid bedded and pointed in any mortar description or thickness in floors, apron etc complete all as specified and directed.

M & L for screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes complete all as specified and directed.

M & L for kota stone slab flooring 20-25mm thick over and incl. cement screed base in cement mortar (1:6) 15mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete complete all as specified and directed.

All as per item No 3 above but as a skirting/raisers over and incl.10mm thick rendering in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 7 to 8mm thick (Square/Rectangular) area of each Tile Exc 0.18 Sqm but N exc 0.38Sqm in floors etc over and incl. screed bed of cement mortar (1:6) 15mm thick, set jointed and pointed in neat cement slurry and pointed in coloured cement to match in floors complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 7 to 8mm thick (Square/Rectangular) area of each Tile exc 0.18 Sqm but N exc 0.38 Sqm as in skirting etc over and incl. backcoat of CM (1:4) 10mm thick, set jointed and pointed in neat cement slurry and pointed in coloured cement to match in floors complete all as specified and directed.

M&L for Ceramic Non-skid coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,in floors etc over and incl. screed bed of CM (1:6) 15 mm thick set and jointed in neat cement slurry with and pointed in coloured cement match the colour of tiles all as specified and directed.

M&L for non skid coloured ceramic tiles 6-7mm thick(square of rectangular) area of each tiles exc 0.06 Sqm but not exc 0.11 Sqm, in floor over and including 15mm thick screed bedding in CM 1:6 and jointing with neat cement slurry and pointing with white/coloured cement to match the surfaces complete all as specified and directed.

M&L Glazed ceramic coloured tiles of size. 350x250x7mm/450x350x7mm thick on vertical surfaces of walls such as skirting dado etc over and incl. 10mm thick back coat in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match complete.

M & L for chequered cement concrete tiles 30cm x 30cm x 20mm thick Rubber moulded with grey cement and pigment, including 15mm thick screed in CM 1:6, set jointed & pointed in neat cement slurry in floors complete all as specified and directed.

M&L for precast cement concrete interlocking tiles 60 mm thick Rubber moulded with strength 30 N/sqmm as in floor/pavement laid on 30 mm thick stone dust cushioning laid dry to the profile complete all as specified and directed.

M & L for Granite 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including griding and polishing types all as specified and directed.

M & L for machine cut cudappa stone slab 20 - 25 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Rounding to edges of stone slabs one edges, such as in steps, cooking platform, and other similar situations all as specified and directed.

M & L for plain cement concrete 1:5:10 type E-2 using (40mm graded stone aggregate) as foundations,filling and mass concrete complete all as specified and directed.

S & F 15 mm dia Stop valves, cast copper alloy, screwed down, high pressure, fancy type, chromium plated screwed both ends for iron pipe or for unions and fixed complete as in repairs all as specified and directed.

S & F 15 mm dia bib taps, cast copper alloy fancy type with chromium plated, screwed for iron pipe or for brass ferrule and fixed complete as in repairs all as specified and directed.

S & F 15 mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated with fancy type, screwed down high pressure, with or without lettered 'Hot' or ' Cold' with long screwed shanks and flynuts, screwed for iron pipe and fixed complete as in repairs all as specified and directed.

S & F Vitreous China wash basin, white, flat back, size 580 x 450 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets with 32 mm dia Waste fittings, brass, chromium plated with waste pipe complete as in repairs all as specified and directed.

S & F brass chromium plated Tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed.

S & F Vitreous china wash down water closet pan ( pedestal pattern ) white ( excluding fixing bolt, flushing cistern and flush pipe ) complete as in repairs all as specified and directed.

S & F Vitreous china squatting pan, Orissa pattern size 580 x 440 mm white, with integral foot rests ( excluding flushing cistern and flush pipe )complete all as specified and directed.

S & F 10 Litrs PVC valveless,low level flushing cistern, low level, white with inlet, ball valve, float and handle including brackets with 32 mm dia flush pipe of polyethylene of low or high density or PVC, for low level cistern complete as in repairs all as specified and directed.

S & F Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete as in repairs all as specified and directed.

S & F 75 mm dia PVC ( SWR ) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S & F PVC connections15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

Dismantling of old water tank exc 250 Ltr & n.exc 500 Ltr capacity complete all as specified and directed.

Supply and fixing, hoisting PVC tank of 500 ltr capacity two layered incl. S&F 20mm dia PTMT with epoxy coated aluminium rod and high density plastic ball valve screwed for iron pipe and fixed.(Minimum weight 15mm-142 gms/20mm-210gms/25mm-455 gms/40mm-690 gms float valve assembly complete all as specified and directed.

Dismantling of old water tank exc 500 Ltr & n.exc 1000 Ltr capacity complete all as specified and directed.

Supply and and fixing, hoisting PVC tank of 1000 ltr capacity two layered including S&F 20mm dia PTMT with epoxy coated aluminium rod and high density plastic ball valve screwed for iron pipe and fixed.(Minimum weight 15mm-142 gms/20mm-210gms/25mm-455 gms/40mm-690 gms float valve assembly complete all as specified and directed.

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or labortory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete as in repairs all as specified & directed.

Dismantling of asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and directed.

M&L for 6mm thick asbestos cement corrugated or semi corrugated sheets as in roof, wall coverings fixed with J/L type bolts or cranked hook bolts etc complete all as specified and directed.

M&L for serrated ridge for corrugated or semi-corrugated sheets 6mm thick AC fixed with ‘L’ ‘J’ type or cranked hook bolts etc complete all as specified and directed

Dismantling of Single layer Mangalore pattern or similar tiles in roofing including ridge complete all as specified and directed.

Dismantling of battens for tiles, singles etc, of any size including tiling fillets spaced exc 15 cm complete all as specified and directed.

Dismantling unframed work of timber scantlings 40 sq.m and over in any section, in any position complete all as specified and directed.

M & L for Clean sawn 2 nd class hard wood in scantling as a post and rafter complete all as specified and directed.

M & L for second class hard wood clean sawn battens at 30 cm centres exc 15 and n.exc 25 sq.cm complete all as specified and directed.

All as per item No -39 above, but fixing only complete all as specified and directed.

M & L roof tiles, mangalore pattern, interlocking at side joint, laid dry complete all as specified and directed.

All as per item No -41 above, but except tiles complete all as specified and directed.

M & L ridge or hip tiles to suit manglore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 complete all as specified and directed.

All as per item No - 43 above, but except tiles complete all as specified and directed.

S & F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt weided tubes conforming ti I.S 1161-1998 grade St 240 complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of Mangalore pattern of red colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified.

M & L for Preparing surface of wood and wood based materials, new or old, of any descripion and girth, not otherwise described and treated with two coats of creosote complete all as specified and directed.

M & L for two coats of synthetic enamel paint over a priming coat of with red oxide incl. preparation of new steel surfaces of any description over 10 cm width or girth complete all as specified and directed.

Dismantling of wall and ceiling board(fiblre, pulp, insulation etc) any thickness including cover fillets complete all as specified and directed.

S & F powder coated aluminum alloy interlocking snap grid 605mm x 605mm consists of Min Tee runners of size 38mm x 25mm x 1.5mm and cross Tee of size 25mm x 25mm x 1.5mm, spaced between the main Tee at 600mm centre to centre to form a grid of 600mm x 600mm complete all as specified and directed.

M & L for 4mm thick non asbestos fibre cement building boards of make 'E board classic designer board (Cascade or Occenic) of M/S Everest industries Ltd or equivalent as approved, fixed or laid/ inserted to timber/GI/Aluminium framework with complete all as specified and directed.

Demolition of brick work or stone/boulder masonary, laid in cement mortar or cement lime mortar complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan n.exc 6m mean radius in cm 1:6 using old size brick complete all as specified and directed.

Taking down cement mortar plastering on brick or stone walls, etc. including raking out joints,hacking for key,scrubbing down with water, etc complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth ( without using extra cement ) complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth ( without using extra cement ) with sagol finish on plastered surface complete all as specified and directed.

M&L for Preparing surfaces newly plastered or un plastered / concrete surfaces and apply two coats of cement base paint over a coat of primer etc. complete all as directed

M&L for preparation of new plastered surface of walls and applying two coats of oil bound distemper over and incl. 1.5mm thick wall care putty complete all as specified and directed.

M & L for Two coat of white wash incl. prepation new surface of wall / ceiling complete all as specified and directed.

Taking up or down steel tubing and connections, store 15 mm dia pipe complete all as specified .

Taking up or down steel tubing and connections, store 20mm dia pipe complete all as specified .

S & F 15 mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S & F 20 mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M&L special treatment to sunken portion with 10mm thick plaster in CM 1:4 with WPC liquid Complast 421 and applying one coat each of Nittoproof 100 and Nittoproof 120 on plastered surfaces.rendering again 10mm thick in CM 1:4 mixed with Complast - 421 filling the sunken floor with PCC 1:5:10 using brick bat area of floor upto 1.5 Sqm including 40 mm dia 0.60 m pipe complete all as specified and directed.

All as per item No 65 herein abov,e but for kitchen area n exc 0.50 sqm on plan all as specified and directed.

M&L special treatment to floor/wall of bathroom with 10mm thick plaster in CM 1:4 with WPC liquid Complast 421 and applying one coat each of Nittoproof 100 and Nittoproof 120 on plastered surfaces.rendering again 10mm thick in CM 1:4 mixed with Complast - 421 complete all as specified and directed.

M&L for cement concrete 1:2:4 Type Bo using 12.5mm grade stone aggregate as in Chajja Junction, coping and similar works including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

S & F mild steel deformed bars Fe 500, 6mm to 8mm dia cut to length, bent to shape required including cranking, bending, spirally for hooping columns, hooking ends & binding with & including MS wire (annealed) not less than 0.9mm dia of or securing with clips complete all as specified and directed.

Taking down chowkat or frame with shutters (with out taking off shutter from the frame ) not exceeding 1.5 Sqm each complete all as specified and directed..

Taking down shutters of any description exc 1 sqm and n exc 2 sq.m each complete all as specified and directed.

Taking down shutters of any description n.exc 1 sq.m each complete all as specified and directed.

M & L for solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

M & L for factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame made out of M.S.tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour 'PVC'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S & F 150 mm Extruded aluminium handles fabricated type, anodised and polished etc completed all as directed

S & F 150 mm long aluminium anodised , barrel tower bolts of extruded section etc .complete as in repairs complete all as specified and directed

S & F Butt hinges, medium weight, cold rolled mild steel, and fixed 100 mm length.

S & F 250mm aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type ) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

M & L for 2nd class hardwood as glazed and skeleton shutters 35 mm thick ( three number of panel ) open rebated and prepared to receive glass, gauze, etc (without sash bars ) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutter as specified in SSR Part l, section 8, clause 8.24 ( a ); supplied and fitted to chowkats complete all as specified and directed.

All as per item No 79 above, but divided into squares,with plain,chamfered or rounded,mitred and rebated sash bars, any numbers (30 mm thick) complete all as specified and directed.

Taking down chowkats or frames exc.1.5 sq.m but not exc. 4 sq.m each but with shutters ( without taking off shutters from the frame ) complete all as specified and directed.

M & L for second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

S & F 35 mm thick second class hardwood plain,framed,panelled shutters ( three number of panel ) with panels of timber flat on both sides (feather edged ) or of 12mm BWP commercial ply with commercial face veneers supplied and fitted to choukats complete all as specified and directed.

S & F powder coated aluminium doors, shutters, side hung type with sash bars, locking rails, locking arrangements and hydraulic door closing arrangement including necessay joinery cleats, glazing clips, rubber packing, howkats aluminium snap beading, screws, suitable handle etc with and including tintet sheet glass or ordinary glasing quality of 5mm thick size of lock rails 44.45x81.50mm side rails 85x44.45mm top rail 83.5x44.45mm, bottom rail 101.6x44.45mm and size of chowkat frame 101.6x44.45mm and thickness of aluminium member 1.40mm thick complete all as specified in MES SSR, Part-I clause 10.37 all as specified and directed.

S & F powder coated window, three track shutters, with sash bars, locking rails, locking arrangements including necessay joinery cleats, glazing clips, rubber packing, Chowkats aluminium snap beading, screws, suitable handle etc with and including sheet glass or ordinary glazing quality of 5mm thick size of side rails , top rails , bottom rail 85x44.5mm and size of chowkat frame 101.6x44.45mm and thickness of aluminium member shall be 1.40mm thick complete all as specified in MES SSR, Part-I clause 10.37 all as specified and directed.

S&F powder coated Anodised aluminium frame for doors, windows ventilators and any type of work with one or more rebates including joining cleat for fixing etc. complete shall as specified and directed.

S&F 5.5 mm thick frosted glass, ordinary quality and aluminium glazing clip with rubber gasket incl all fittings complete as in repairs all as specified and directed.

S&F for prelaminated particle board 18/19 mm interior grade prelaminated on one side with decorative choice lamination and other side balancing white lamination fixed with screw timber frame work including dismantling u/s board all as specified and directed.

S&F sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square n.exc 0.50Sqm in each panes complete as in repairs all as specified and directed. .

S&F glavinized mild steel wire cloths 0.56mm nominal dia and avrage width of apreture 1.18mm & fixed with tint tacks or glavinized wire staples complete as in repairs all as specified and directed.

S & F 200 mm , ordinary rat tail rod pattern springs inclunding roller and roller plate complete as in repairs all as specified and directed.

M & L for cement concrte Type C1 1:3:6 ( 20 mm graded aggregate ) as in Bed Block for hold fast complete all as specified and directed.

S & F Mild steel as in hold fasts Fe.290.Gde-E-165 complete all as specified and directed.

M&L for preparing old decorative plastered surface of walls by removal of existing treatment washing down and applying two coats of distemper oil emulsion over a coat of primer over and incl. one coat of wall care putty 1.5mm thick all as specified and directed .

All as per above here-in-before but as on ceiling complete all as specified.

M&L for preparing old decorative plastered surface of walls by removal of existing treatment washing down and applying and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M & L for Two coat of synthetic enamel paint over old stone or concrete surface any description, not otherwise described, over 10 cm width or girth complete all as specified and directed.

M & L for Two coat of synthetic enamel paint over a coat of pink primer on wooden surfaces including preparation of new surfaces of any description, not otherwise described, over 10 cm width or girth complete all as specified and directed.

S&F soap dish chromium plated and type fixed to plugs with CP brass screw fixed as in repairs.

S&F CP Basin Mixer for mixing hot & cold water of approved quality as in repairs.

S&F wall mixture mixing valves incl. three joints to steel pipes or unions 15 mm bore fancy type best quality as per sample approved by GE fixed as in repairs

S & F floor door stopper of aluminium alloy and tongue, anodised with hard drawn steel overall length of cover plate 140mm.as in repairs complete all as specified and directed.

S & F ball valve high pressure of PTMT with epoxy coated , aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule 20 mm bore complete.( 210 gms weight ) complete all as specified and directed as in repairs.

S & F ball valve high pressure of PTMT wiyh epoxy coated , aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule 15 mm bore complete.( 142 gms weight ) complete all as specified and directed as in repairs.

S&F stainless steel plate rack of size not less than 90cmx75cm fixed with stainless steel screw including taking out old unserviceable wooden plate rack complete all as specified and directed.

S&F 15 mm any type of spindle for stop cock, bib tap, pillar tap, wash basin mixer and wall mixer etc as in repairs all as specified and directed .

S&F chromium plated shower roses with swivel joints 125 mm dia size incl fixing to GI pipe/union fixed in repairs.

S & F bib tap standard of PTMT any colour high pressure screwed for iron pipe & fixed in repairs complete all as specified and directed.

S&F 8mm thick corner glass shelf fixed with brackets and including chromium plated brass screws and wooden/plastic cleats all as specified and directed .

S&F Health faucet including MS/anodised hanging device fixed in repairs complete all as specified and directed.

S&F continuous (paino) hinges, mild steel, bright finish or electro galvanised width of flap (when open) in 40mm as in repairs all as specified and directed.

S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel bright finished as in repairs all as specified and directed.

S&F Ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixing complete all as specified and directed.

Dismantling PVC Pipes with fittings 75mm to 110mm dia complete all as specified and directed

S&F for PVC (SWR) pipe 110 mm dia single socketed in any length with rubber ring jointed level fixed to walls complete all as specified and directed.

S&F for PVC (SWR) pipe 75 mm dia single socketed in any length with rubber ring jointed level fixed to walls complete all as specified and directed.

S&F PVC (SWR) plain bend 110 mm dia complete all as specified and directed.

S&F PVC (SWR) plain bend 75 mm dia complete all as specified and directed.

S&F PVC (SWR) branch piece single or double T equal or unequal with access door 110 mm dia complete all as specified and directed.

All as per Item No 120 above, but 75 mm dia.

S&F PVC (SWR) vent cowl 110 mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl 75 mm dia complete all as specified and directed.

S&F PVC (SWR) branch piece single or double 'Y' equal or unequal with access door 110 mm dia complete all as specified and directed.

All as per Item No 124 above, but 75 mm dia.

M&L for 75 mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection including making joint at every 3 mtr interval and at corner and filled with mixture of bitumen and sand and finished even and fair and laid in alternate bays complete all as specified and directed.

S&F door closer hydraulically regulated of aluminium (die cast ) body designation No-2,universal type,suitable for door shutters of 701 to 850 mm in width and of wight between 36 to 60 kg and fixed all as specified and directed.

Taking down carefully existing unserviceable bitumen felt(any number of layers) including plaster of any thickness,wire brushing and cleaning of the surface of roof terraces including flashing and junctions of parapets kerb wall,PCC fillets,benching etc and removing of the rubbish to a distance not exceeding 500 M from the building and depositing where complete all as specified and directed.

Demolition of cement concrete of any description (Unreinforced) below or above ground floor incl concrete at junctions of parapets and roof terraces, flashings, Kerbs walls,PCC fillets, benching,coving of chajjah top/junctions etc complete all as specified and directed.

Supply only integral water proofing compound.

M &L for providing plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) for roof, kerb, or mud stops,rounded or chamfered on edges etc complete all as specified and directed .

M&L for rendering 10mm thick CM (1:4) on roof slab top, mixed with water proofing compound finished even and fair without using extra cement complete all as specified and directed. Note: Water Proofing liquid shall be measured and paid separately.

M & L for cleaning the newly plastered surfaces of concrete ( roof etc) with wire brushes and applying water proofing treatment as under :- i) Apply one coat of bituminous primer @ 0.25 kg/Sq.M ii) Providing and laying 3 mm thick APP modified water proofing membrane weighing not less than 3.5 Kg / Sqm reinforced with non woven polyester mat weighing not less than 160 gm/Sqm all as specified procured from any one of the approved manufacturer's iii) Apply one coat of solar reflective bituminous aluminium paint @ 0.15 Kg/Sqm over membrane over non assesble roof surfaces complete all as per manufacturer's instructions and directed .

Note: Amount of sch of credit of Rs.37,110.00/- will be deducted from total amount of BOQ.

J Sams Contructions

SHYAM CONSTRUCTION

JEET CONSTRUCTIONS CO.

Alpha Construction

M/S SAMEER SUBHASH PATANI

M/S Chandan Construction Company

M/S MANISH CONSTRUCTION CO

K P Enterprises

Nilesh Enterprises

M/s Lakhanpal construction company