SPECIAL REPAIR WORKS

Amount

CIVIL WORKS

Dismantling , Clearing away and carefully stacking materials useful for reuse for any thickness of walls A.Clean removal of cement plaster

B.Chipping the concrete and roughening the surface

C.Pressed Tiles in Roof Portion

D.Dismantling Plain Cement flooring

Cemet Concrete 1:4:8(one cement,four sand, eight aggregate) using 40mm gauge HBG stone jelly including cost of all materials and labour charges etc., complete

Plastering with Cement mortor 1:5 (one cement,five sand) with 12 mm thick including cost of all materials,labour charges for finishing and curring etc., complete

Plastering with Cement mortor 1:3 (one cement,five sand) with 20 mm thick including cost of all materials,labour charges for finishing and curring etc., complete

White washing one coat with freshly burnt white shell lime and color washing two coats using best quality of approved variety of coloring pigment in all floors including cost of lime,blue powder,fevucol type gum,brushes,scaffolding charges ,etc.,etc., complete complying with standard specification and as directed by the departmental officers.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Finishing the floor with premium grade designed vetrified tiles of size 600 x 600 x 8 mm of best approved colour quality laid over 20mm thick cement mortar 1:3 bed as joint free and pointing with the same colour cement added with the colouring pigments at 3.0 kg/m² etc., complete complying with standard specification

Providing weathering course in brick jelly lime concrete 20mm size in pure slaked lime over RCC roof slab, the projection being 32:12.5 for required depth and laid with required slope and thickness

Finishing the top of roof with one course of pressed tiles of size 23 x 23 x 2 cm of approved quality in cement mortar 1:3 12mm thick with water proofing compound confirming to IS at 2% by weight of cement used and the top pointed with same mortar is mixed with red oxide to the full depth of tiles etc., complete complying with standard specifications and as directed by the departmental officers

Supply, laying jointing PVC pipes of approve quality and best variety confirming to ISS and with ISI mark of the following sizes .including cutting threading and fixing PVC /GI specials but excluding the cost of such specials and fixing to wall with necessary teak wood plugs , clamps screws and making holes on the walls,floors and making good the dismantled portion to the original condition with necessary scaffolding charges etc., comlete complying with standard specification 110mm 6kgf

Supply and fixing of WT bulk head fitting with guard suitable for 11W CFL lamp with CFL

Supply and fixing of WT bulk head fitting with guard suitable for incandescent lamp with 60W bulb

Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 1 meter down rod on the existing clamp

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with switch box with 5A FT switch inflush with wall and covered with hylum sheet of 3mm thick with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for light point / fan point (for electronic regulator)

NAGESH KUMAR

S K VADIVELMURUGAN