Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.1 LAccepted-AOC ROOM NO D 297 PART III GANESH MURTI NAGAR CUFF PARADE ROAD COLABA MUMBAI 400005 | MUMBAI | MAHARASHTRA | 400005 | L1 | Accepted-AOC Being Lowest Tenderer | |
| 2 | L2₹47.8 L+₹50,194.99 (1.06%)Rejected-Finance 1202 SAI PROVISO DHNISHT PLOT NO 72 73 SECTOR 20 KOPARKHAIRANE NAVI MUMBAI | THANE | MAHARASHTRA | 400601 | L2 | Rejected-Finance Being Other than lowest Tenderer | |
| 3 | L3₹52.5 L+₹5.2 L (11.0%)Rejected-Finance SHOP NO 10 BMC SHOPPING CENTRE MITHA NAGAR GOREGAON WEST MUMBAI 400 104 | MUMBAI | MUMBAI SUBURBAN | MAHARASHTRA | 400104 | L3 | Rejected-Finance Being Other than lowest Tenderer | |
| 4 | L4₹55.5 L+₹8.2 L (17.3%)Rejected-Finance SWAGAT CO OP HSG SOCIETY LTD 22 303 CHAITANYA SHIVAJI RAJE COMPLEX MHADA COMPLEX OPP EKA NAGAR KANDIVALI W MUMBAI 400 067 | MUMBAI | MUMBAI SUBURBAN | MAHARASHTRA | 400067 | L4 | Rejected-Finance Being Other than lowest Tenderer | |
| 5 | L5₹56.5 L+₹9.1 L (19.3%)Rejected-Finance | L5 | Rejected-Finance Being Other than lowest Tenderer |
| Sl No | Description | Qty | Unit | ASHOK ENTERPRISES L2 | K.C.P ENTERPRISES L5 | Shree Ayyappa Engineering L3 | cooltech engineering services L4 | shubham construction L6 | B P ENTERPRISES L7 | GANGAJAL L1 | ADITYA CONSTRUCTION L8 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling floor hearth or wall tiling including cement mortat bedding but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. | 293 | Sqm | 50 ₹14,650 | 40 ₹11,720 | 52 ₹15,236 | 45 ₹13,185 | 35 ₹10,255 Lowest | 57 ₹16,701 | 37 ₹10,841 | 65 ₹19,045 |
| 2.00 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness below or above ground floors complete all as specified and as directed. . | 7.5 | Cum | 100 ₹750 | 45 ₹337.5 Lowest | 78 ₹585 | 85 ₹637.5 | 150 ₹1,125 | 72 ₹540 | 555 ₹4,162.5 | 55 ₹412.5 |
| 3.00 | M&L for PCC 75 mm thick type C-2 (1:2:4) using 40mm graded aggregate as in sub base all as specified and as directed. | 100 | Sqm | 750 ₹75,000 | 900 ₹90,000 | 700 ₹70,000 | 710 ₹71,000 | 605 ₹60,500 | 772 ₹77,200 | 555 ₹55,500 Lowest | 860 ₹86,000 |
| 4.00 | M & L for Non skid coloured ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles with and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed. | 20 | Sqm | 1,100 ₹22,000 | 1,680 ₹33,600 | 1,200 ₹24,000 | 1,100 ₹22,000 | 1,230 ₹24,600 | 1,163 ₹23,260 | 888 ₹17,760 Lowest | 1,711 ₹34,220 |
| 5.00 | M & L for coloured glazed ceramic tiles in vertical surface area of tiles n exc 0.18 Sqm thick with and including 10 mm thick cm (1:4) backing coat and Triangular filliting at top of skirting, set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles complete all as specified and as directed. . | 40 | Sqm | 1,000 ₹40,000 | 1,680 ₹67,200 | 1,120 ₹44,800 | 1,230 ₹49,200 | 1,155 ₹46,200 | 1,265 ₹50,600 | 985 ₹39,400 Lowest | 1,833 ₹73,320 |
| 6.00 | M&L vitrified ceramic tiles 9-10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor including 15mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
Note : Engr-in-Charge will select sample from latest catalouge. | 30 | Sqm | 1,350 ₹40,500 | 1,600 ₹48,000 | 1,355 ₹40,650 | 1,422 ₹42,660 | 1,470 ₹44,100 | 1,188 ₹35,640 | 1,247 ₹37,410 | 1,133 ₹33,990 Lowest |
| 7.00 | All as per item No. 6 above but in skirting/ verticla surface including 10mm thick backing coat in CM 1:4 complete all as specified and as directed. | 3 | Sqm | 1,500 ₹4,500 | 1,650 ₹4,950 | 1,250 ₹3,750 | 1,225 ₹3,675 | 1,490 ₹4,470 | 1,144 ₹3,432 Lowest | 1,265 ₹3,795 | 1,359 ₹4,077 |
| 8.00 | Demolition of Stone slabs and granite/ tiles / Interlocking paver blocks of any description or thickness in floors, aprons laid, bedded and pointed in any mortar and removing rubbish off the premises (outside MD land) etc complete all as specified and directed. (Note: The place of disposal shall be find out by contractor) | 23 | 10 Sqm | 40 ₹920 | 100 ₹2,300 | 50 ₹1,150 | 65 ₹1,495 | 33 ₹759 Lowest | 47 ₹1,081 | 555 ₹12,765 | 86 ₹1,978 |
| 9.00 | M & L for Hard wear stone (of any type) granite stone slab 20mm thick in flooring machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed. | 10 | Sqm | 4,000 ₹40,000 | 4,000 ₹40,000 | 3,520 ₹35,200 | 3,256 ₹32,560 | 3,420 ₹34,200 | 5,493 ₹54,930 | 1,647 ₹16,470 Lowest | 2,020 ₹20,200 |
| 10.00 | M & L for Hard wear stone 20mm thick (of any type) granite stone slab machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type and including 10 mm thick backing coat in CM 1:3 complete all as specified and as directed. | 20 | Sqm | 4,000 ₹80,000 | 4,500 ₹90,000 | 4,250 ₹85,000 | 4,000 ₹80,000 | 3,856 ₹77,120 | 4,658 ₹93,160 | 1,700 ₹34,000 Lowest | 3,030 ₹60,600 |
Tender Value
₹48.6 L
EMD Value
₹97,120
Closing Date
2 Jul 2025, 6:55 pmClosed
LT COL ANIL KUMAR S
GARRISON ENGINEER NW KUNJALI DR HOMI BHABHA ROAD NAVY NAGAR COLABA MUMBAI 400005
8176 REPAIR/REFURBISHMENT OF LT PANELS/COPE POINT IN CRUISER WHARF JETTY AT NAVAL DOCKYARD AND ADDN/ALTN AND SPECIAL REPAIR OF MAIN INDUSTRIAL CANTEEN AT NAVAL DOCKYARD MUMBAI
2025_MES_714370_1
8176/E8
Open Tender
Civil Works
Item Rate
180 days
GE (NW) KUNJALI
ALL AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
Yes
GE (NW) KUNJALI
₹97,120
Yes
28 Sept 2025
13 Jun 2025
4 Jul 2025
20 Jun 2025
2 Jul 2025
24 Jun 2025
13 Jun 2025 - 20 Jun 2025
Amount
Dismantling floor hearth or wall tiling including cement mortat bedding but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness below or above ground floors complete all as specified and as directed. .
M&L for PCC 75 mm thick type C-2 (1:2:4) using 40mm graded aggregate as in sub base all as specified and as directed.
M & L for Non skid coloured ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles with and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.
M & L for coloured glazed ceramic tiles in vertical surface area of tiles n exc 0.18 Sqm thick with and including 10 mm thick cm (1:4) backing coat and Triangular filliting at top of skirting, set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles complete all as specified and as directed. .
All as per item No. 6 above but in skirting/ verticla surface including 10mm thick backing coat in CM 1:4 complete all as specified and as directed.
Demolition of Stone slabs and granite/ tiles / Interlocking paver blocks of any description or thickness in floors, aprons laid, bedded and pointed in any mortar and removing rubbish off the premises (outside MD land) etc complete all as specified and directed. (Note: The place of disposal shall be find out by contractor)
M & L for Hard wear stone (of any type) granite stone slab 20mm thick in flooring machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.
M & L for Hard wear stone 20mm thick (of any type) granite stone slab machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type and including 10 mm thick backing coat in CM 1:3 complete all as specified and as directed.
M&L for providing edge moulding to 18-20mm thick grenite incl machine polishing to edge to give high glossy finish etc complete all as specified and as directed.
M&L for 20-25mm thick, machine cut, Kota stone slab, as in floors, steps, landing, skirting etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab, including cutting, grinding rubing and mirror polishing etc. with and including 20mm thick screed bed in CM 1:4 complete all as specified and as directed.
Taking down cement plaster or cement lime plaster on brick or stone walls etc including raking out joint, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M & L rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth (with out using extra cement) including irrection and dismantling of scaffolding to carrying out works up to 1 to 4 storeys buildings complete all as specified and directed.
M & L rendering 5 mm thick in CM (1:3) on ceilling finished even and smooth (with out using extra cement) (the ceiling height shall be inculded upto top slab of the bldg) complete all as specified and as directed.
M & L rendering 15 mm thick in CM (1:4) on external surface of wall incl WPC @ 3% by weight of cement finished even and smooth complete including irrection and dismantling of scaffolding to carrying out works up to 1 to 4 storeys buildings complete all as specified and as directed.
Supply only water profing compound @ 3 % by weight of cement complete all as specified and directed.
M&L for 3mm wall care putty on plastered wall surface including sanding and cleaning before applying the paints complete all as specified and as directed.
M&L for preparation of new platered wall surfaces of any description & applying two coats of acrylic (antifungal) exterior grade paint @ 1.67 lit/10 Sqm over and including priming coat @ 2.20kg/10 Sqm) on wall/roof including including irrection and dismantling of scaffolding to carrying out works up to 1 to 4 storeys buildings complete all as specified and directed.
M & L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper with priming plastered and other surfaces with alkali resistant primer with 3mm thk wall care putty on plastered surfaces including necessary scaffolding complete all as specified and directed.
M/L for preparation of new plastered surfaces of ceiling and applying three coats of white wash including necessary scaffolding complete all as specified & directed .
M&L for preparation of old surfaces of of wall any description & applying one coats of acrylic (antifungal) exterior grade paint @ 1.67 lit/10 Sqm over and including priming coat @ 2.20kg/10 Sqm) on wall/roof up to 1 to 4 storeys buildings complete all as specified & directed .
M&L for preparation of old wall surfaces of any description & applying one coat of oil bound distemper paint on wall/roof including necessary scaffolding complete all as specified and directed
Demolition of stone/brick masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings dressed stone work and pre cast concrete articles complete all as specified and directed.
M&L brickwork with sub class 'B' bricks , straight or curved on plan exc 6m mean raidus built in cement mortar 1:6 complete all as specified and directed
M & L for brickwork with sub-class `B` bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed
M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick rough finish surface of concrete flat complete all as specified and directed
M&L 10mm dia over mild steel TMT bars, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not lessthan 0.9mm dia or securing with clips etc complete all as specified and directed .
M& L for Reinforced cement concrete Nominal mix 1:2:4 type B1 (using 20 mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint with necessary scafolding for high rise bldgs upto 2nd floor floor complete all as specified and as directed
Taking up or down 15mm bore steel tubing connection including cleaning for refixing or removing etc complete all as specified and directed.
Taking up or down 20mm bore steel tubing connection including cleaning for refixing or removing etc complete all as specified and directed.
M&L for supply, lay, connect and test GI Tubing, 15mm dia medium grade with all fittings and fixed complete to wall and ceiling or laid in floor complete all as specified and directed .
M&L for supply, lay, connect and test GI Tubing, 20mm dia medium grade with all fittings and fixed complete to wall and ceiling or laid in floor complete all as specified and directed .
Taking down chowkats or frame with shutter ( without taking off shutter from frame) , n exc 1.5 sqm each complete all as specified & directed .
Taking down chowkats or frame with shutter ( without taking off shutter from frame) exc 1.5 sqm but n exc 4 Sqm each complete all as specified & directed .
S&F 2nd class hard wood (sal) plain, solid, straight chawkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified & directed .
S&F 40mm thick flush shutter solid core construction, with black board core and decorative particle board core both faces, commercial type complete all as specified and as directed.
S &F 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in and fitted to chowkats complete all as specified and as directed.
M & L for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.
M&L for preparation of old painted wooden of any description over 10cm width or girth and applying one coat of synthetic enamel paint incl necessary scafolding complete all as specified and as directed
S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and as directed.
S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and as directed.
S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed complete all as specified and as directed.
S&F butt hinges 100 mm Stainless steel hinges medium weight complete all as specified and as directed.
S&F for 140mm long floor door stopper of aluminium alloy body and tonge, anodised with hand drawn steel spring fixed in floor complete all as specified and as directed.
S&F Door closer hydraulically regulated, designation No. 3,universal type, extruded aluminium body, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.
S&F powder coated aluminium (minimum 25 micron thickness of coating) of various section as required for doors, window & partition/Ventilator etc including fixing and making the frames hinges to receive glass/wire gauge etc. Complete incl all fittings like rubber beading, clips locking arrangement, handle, tower bolt for shutter, sealant complete all as specified and as directed.
S&F aluminium grill with and including suitable aluminium anodised frame F/H section as requird manufactured by M/S Decogrill as per design No DG- 104, 7.5 mm thick complete all as specified and as directed.
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with wiren staple complete all as specified & as directed.
M&L 4 mm thick plain glass sheets ordinary quality in squares n.exc 0.5sqm each pane fixed with rubber beading for aluminium windows/doors etc complete all as specified and as directed.
M&L 4 mm thick plain glass sheets ordinary quality in squares exc 0.5sqm each pane fixed with rubber beading for aluminium windows/doors etc complete all as specified and as directed.
S&F in 18/19 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work/metal Frame Work complete all as specified and as directed.
S & F in repairs 12 mm thick pre-laminated Medium Density board,both side decorative lamination interior grade,fixed in aluminium/ wooden frame work complete all as specified and as directed.
S & F 30mm wide Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.
S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed
S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed
S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed
S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and as directed
M&L for nominal mixed cement concrete 1: 7:12 with graded coarse aggregate complete all as specified and as directed
S&F in repairs 32mm dia PVC waste pipe for WHB and urinals fixed in repairs complete all as specified and directed.
S&F in repair Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs of 15 mm bore pipe etc complete all as specified and directed.
S&F in repair 75mm dia of outler cast iron nahani trap , with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.
S&F in repairs 100mm dia of outler cast iron nahani trap , with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.
S & F in repairs for providing 15 mm dia PVC connection of length 450mm long complete all as specified and directed.
S&F in repairs sinks with drainage bard made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwar wall or including fxing cantilever brackets and connecting uinon to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed
S&F in repairs stop valves/gate valve, 40mm bore dia, cast copper alloy with crutch or butterfly handle, any type in any position complete all as specified and as directed
S&F in repairs 25mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed
M&L for Framed work such as grills, gratings, sun shed etc with ends of bars shouldered and/or riveted or welded, or forged into spikes, framed guard bars, barred iron doors, ladders, farmed balastures, walk ways, railings, frame work of water tanks and similar work conforming to Fe-410-0 or Fe-310-0 complete all as specified and directed.
M&L for preparation of new steel surfaces exc 10cm width of girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed..
Dismantling of plain or corrugated steel sheeting any gauge thickness including nainital or similar pattern on roof covering or wall cladding complete all as specified and directed .
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in wall cladding to wall, fixed with self tapping screws complete all as specified and directed .
S&F 0.50 mm thick plain, aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed complete all as specified and directed .
Removing debris exc. 1.50 Km but n exc. 20 Km and depositing where directed, in soil outside MD land complete all as specified and directed .
M & L for point wiring complete with 1.5 sqmm single core multistranded PVC insulated &unsheathed multi stranded copper conductor cable 1100 volts grade ISI marked and drawn through and including non metalic PVC casing & caping with all accessories fixed on wall/ceiling/truss etc with PVC no-mettalic ISI marked terminal boxes fixed on wall including one PVC insulated and unsheated multistranded copper conductor 1.5 Sqmm as earth continuity conductor connected to common earth dolly complete all as specified and directed . (a) One light point controlled by one 5A switch.
All as per item No. 76 above but for One 5A switch socket point on independent board complete all as specified and directed .
M & L for point wiring complete with FRLS PVC insulated &unsheathed multi stranded copper conductor cable of 2.5 Sqmm size 1100 volts grade drawn through and including non metalic PVC casing & caping not less than 25mm width with all accessories fixed on wall including FRLS PVC insulated and unsheated multistranded copper conductor of size 2.5 Sqmm as earth continuity conductor connected to common earth dolly and PVC moduled box ISI marked for having the switches, switch sockets, regulator etc for One 15 Amps switch socket on independent board complete all as specified and directed .
M&L for sub-main wiring with 2 runs of 4.0sqmm and one run of 4 sqmm FRLS PVC insulated unsheathed multi-stranded copper conductor cable with proper colour coding drawn through and including non metallic PVC casing & caping not less than 25mm width ISI marked with all accessories like PVC elbow, PVC Tee, etc fixed on walls complete including connecting up complete all as specified and directed . Note: 3 runs of cable and one run of PVC casing caping shall be measured as one unit
M&L for sub-main wiring with 4 runs of 10 sqmm and one run of 10 sqmm FRLS PVC insulated unsheathed multi-stranded copper conductor cable with proper colour coding drawn through and including non metallic PVC casing & caping not less than 25mm width ISI marked with all accessories like PVC elbow, PVC Tee, etc fixed on walls complete including connecting up complete all as specified and directed . Note: 5 runs of cable and one run of PVC casing caping shall be measured as one unit
Supply and fixing switch 1 way 6 amps, 1 module complete all as specified and directed .
Supply and fixing switch 1 way16 amps, 1 module complete all as specified and directed .
S&F for modular socket, 6A - 2/3 pin combined 2 modules complete all as specified and directed .
S&F for modular socket, 6/16A, 2/3 pin, combined 2 modules complete all as specified and directed .
Supply and fix single pole and neutral enclouser with a two pin and earth plug and socket complete with one single pole MCB 20 Amps 240V all as directed incl taking down ol existing unsv enclosure complete all as specified and directed . .
Supply and fixing in replacement luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficency PMMA diffuser soft glare free light complete with driver, holders and LED lamp suitable for roof ceiling including connecting light up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.
Supply and fixing steel hood 304 1mm thick stainless with filter and light cutting cutting work size (72x42x18) 6ft, complete all as specified and directed
Supply and fixing steel hood 304 1mm thick stainless with filter and light cutting cutting work size 48x24x18 4ft, complete all as specified and directed
Supply and fixing 1.5 hp tube axel fan 3 phasemoter, complete all as specified and directed
Supply and fixing GI Duct fabrication and arection 22 guage 120 gsm, complete all as specified and directed
Supply and fixing canvas blower connection, complete all as specified and directed
Supply and fixing hood fittings support work labour, complete all as specified and directed
Supply and tube axel fan fitting work labour, complete all as specified and directed
Supply and fixing old blower fan fitting and old duct clean or reinstallation work labour complete all as specified and directed
Supply and fixing portable stored pressure fire extinguisher of 4kg, stainless Steel (SS304L) Body, Forged brass valve with Stainless Steel Lever/ Handle, in built Pressure Relief Device and Non Return Valve for pressure gauge port fitted with Large Dial pressure gauge, Stainless Steel safety pin, High durability Vinyl label, complete all as specified and directed .
S&F Distribution Board double door, prewired type, made out of CRCA mild steel surface with insulated material like polyester or epoxy powder coating and IP 54 & IK 09 protection surface mounting SPN DB 08 Way, 240V with bus bar rating 100Amps, dust and vermin proof complete all as specified and directed .
S & F MCB, C Curve type suitable for 240 volts AC supply, SP 5 to 32A with over load and short circuit protection and rupturing capacity not less than 10 KA including making connection complete all as specified and directed .
S & F MCB, C Curve type suitable for 240 volts AC supply, SPN 40 to 63A with over load and short circuit protection and rupturing capacity not less than 10 KA including making connection complete all as specified and directed .
Supply and fixing industrial plugs and sockets of 3P+N+E, 415 volts, 62A, complete all as specified and directed .
Supply and fixing industrial plugs and sockets of 3P+N+E, 415 volts, 32A, complete all as specified and directed .
ASHOK ENTERPRISES (BID ID -3342349)
Shree Ayyappa Engineering (BID ID -3344212)
cooltech engineering services (BID ID -3344411)
K.C.P ENTERPRISES (BID ID -3343330)
shubham construction (BID ID -3342363)
B P ENTERPRISES (BID ID -3344314)
ADITYA CONSTRUCTION (BID ID -3344455)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .