Construction of warehouse 800 mt and factory shed 206 sqm

Amount

Sub-Work No.-1 W.H. Building Shed

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means Spec.No. : Bd.A.1/Page No.259 (SSR Sr No.721, Item No.21.02 Godown 800 MT - 78.19 Shed 206 Sqm. - 57.33 Total - 135.52

Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Manual Means Spec.No. : Bd.A.1/Page No.259 (SSR Sr No.722, Item No.21.03) Godown 800 MT - 39.1 Shed 206 Sqm. - 16.20 Total - 55.30

Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. Spec. No. : As directed by Engineer in charge. (SSR Sr.No.754, Item No.21.40) Godown 800 MT - 81.104 Shed 206 Sqm. - 19.008 Total - 100.11

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec. No. : Bd. E. 1/Page No. 287 (SSR Sr.No.827, Item No.24.01) Godown 800 MT -77.84 Shed 206 Sqm. - 31.762 Total - 109.61

Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Spec.No: Bd.F.3 Page No. 298 and B.7,/Page No.38 (SSR Sr. No.836, Item No.25.11) Godown 800 MT - 21.672 Shed 206 Sqm. - 10.368 Total - 32.04 cum

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) spec.No.: Bd.F.5 Page No. 300 and B.7/Page.No. 38 (SSR Sr.No.841, Item No.25.31) Godown 800 MT - 8.586 Shed 206 Sqm. - 20.432 Total - 29.018

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Spec.No.: Bd.F.6 Page No. 300 and B.7, Page No.38 (SSR Sr.No.846, Item No.25.50) Godown 800 MT - 24.33 Shed 206 Sqm. - 8.64 Total - 32.97

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Spec.No.: Bd.F.8 Page No. 302 and B.7, Page No.38 (SSR Sr.No.851, Item No.25.70) Godown 800 MT - 1.728 Shed 206 Sqm. - 1.080 Total - 2.81

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Spec.No.: Bd.F.17, Page No. 306 (SSR Sr. No.871, Item No.26.33) Godown 800 MT - 7.562 Shed 206 Sqm. - 2.314 Total - 9.88

Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. Spec. No. : Bd.A.10 Page No. 262 (SSR Sr.No.750 Item No.21.36) Godown 800 MT - 28.96 Shed 206 Sqm. - 0.00 Total - 28.96

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. Spec. No. : Bd.A.11 Page No. 263 (SSR Sr.No.751, Item No.21.37) Godown 800 MT - 570.658 Shed 206 Sqm. - 245.551 Total - 816.21

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. Spec.No.: Bd.G. 1 Page No. 313 (SSR Sr.No.889, Item No.27.01) Godown 800 MT - 11.471 Shed 206 Sqm. - 03.921 Total - 15.39

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete Spec.No.: Bd.G.5 Page No. 315 (SSR Sr.No.892, Item No.27.05) Godown 800 MT - 39.523 Shed 206 Sqm. - 21.031 Total - 60.55

Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec. No. : Bd.E. 3/Page No. 288/I.S. 456 (2000) (SSR Sr.No.835, Item No.24.16) Godown 800 MT - 1.91 Shed 206 Sqm. - 0.44 Total - 2.35

Providing and fixing mild steel grill work for windows, ventilators, etc. 15 kg/sqm as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. Spec. No. : Bd.U.1 Page No. 537 (SSR Sr.No.1292, Item No.40.02) Godown 800 MT - 14.40 Shed 206 Sqm. - 7.20 Total - 21.60

Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating with box Spec. No. : Bd.U.1 Page No. 537 (SSR Sr.No.1232, Item No.39.39) Godown 800 MT - 14.40 Shed 206 Sqm. - 7.20 Total - 21.60

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. Spec.No.: Bd. L.2 Page No. 368 (SSR Sr.No.958, Item No.32.04) Godown 800 MT - 253.98 Shed 206 Sqm. - 171.72 Total - 425.70

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Spec.No.: Bd.L.7/Page NO.369 (SSR Sr.No.963, Item No.32.11) Godown 800 MT - 369.30 Shed 206 Sqm. - 243.72 Total - 613.02

Providing and laying in situ cement concrete M20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen etc. complete. Spec. No. : As directed by Engineer in charge (SSR Sr.No.1017, Item No.33.30) Godown 800 MT - 475.55 Shed 206 Sqm. - 190.92 Total - 666.47

Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (With mechanical gear) Spec.No.: BD-T-55 Page No. 510 (SSR Sr.No.1218, Item No.39.25) Godown 800 MT - 15.00 Shed 206 Sqm. - 15.00 Total - 30.00

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper. Spec.No.: As directed by Engineer in charge. (SSR Sr.No.737, Item No.21.22) Godown 800 MT - 475.55 Shed 206 Sqm. - 7.36 Total - 482.91

Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete. Spec.No.: Bd. L.10, Page No.370 (SSR Sr.No.966, Item No.32.15) Godown 800 MT - 171.72 Shed 206 Sqm. - 253.98 Total - 425.70

Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. Spec.No.: As directed by Engineer in charge. (SSR Sr.No.1090, Item No.35.21) Godown 800 MT - 253.98 Shed 206 Sqm. - 171.72 Total - 425.70

Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to new plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. Spec.No.: Bd.O.8/Page No.406 (SSR Sr.No.1085, Item No.35.15) Godown 800 MT - 623.28 Shed 206 Sqm. - 415.44 Total - 1038.72

Sub-Work No. -2 Structural Steel Work (PEB) Structural Steel Structural Steel E-350 (JSW make)

Supplying, fabricating,erecting and fixing in position steel structures at all elevations using welding quality steel E-350 (Fe490) confirming to IS: 2062-2006. Rate shall include cost of cutting, welding, slice plates and packing plates, transporting, straighteing, cleaning, fabricating and erecting in position welded/bolted Structural steel work in columns, beams, trusses, purlins, platforms, ladders, monorails, staircases, supports, straighteing of steel members etc. at site to line and level, supply of approved bolts/nuts/washers etc. completed as per drawing including painting, as per G4/G5/G6 before erection and all materials and labour charges etc. completed and including sand blasting & painted with 1 coat of enamel paint (Berger EPILUX SG-HHI 664002) of 35-50 micron each coat with air less spray gun over a coat of zinc chromate primer - 35-50 micron etc. completed as shown in drawing as per specifications and as directed by Engineer in charge/Construction Manager. (The Rate Shall Include cost of bolts,nuts,Washers,welding and electrodes, required for complete work) Spec.No.: As directed by Engineer in charge. (Item No.SST01) Godown 800 MT - Shed 206 Sqm. - Total -

Structural Steel - Cold Formed Light gauged (Essar Make) Supplying,fabricating,erecting Cold Formed Light gauge Structural steel members confirming to IS: 4759-96 including cutting, welding or bolting, splice plates and packing plates, transporting, straighteing, cleaning, fabricating and erecting in position Spec.No.: As directed by Engineer in charge. (Item No.SST02) Godown 800 MT - Shed 206 Sqm. - Total -

Sheeting PPGL 0.50MM THK. Supplying & fixing of PPGL sheets of 0.5mm thick as shown in drawing or as directed by Engineer in charge with all necessary accessories (Essar Make) Spec.No.: As directed by Engineer in charge. Godown 800 MT - Shed 206 Sqm. - Total -

Roof Accessories (Corner Flashing) Supplying & fixing of PPGL sheets of 0.5mm thick PPGL roof accessories as per drawing or as directed by Engineer in charge.Engineer in charge Spec.No.: As directed by Godown 800 MT - Shed 206 Sqm. - Total -

Roof Accessories (Center Ridge) Supplying & fixing of PPGL sheets of 0.5mm thick PPGL roof accessories as per drawing or as directed by Engineer in charge. Spec.No.: As directed by Engineer in charge Godown 800 MT - Shed 206 Sqm. - Total -

Roof Accessories (Gable Flashing) Supplying & fixing of PPGL sheets of 0.5mm thick PPGL roof accessories as per drawing or as directed by Engineer in charge. Spec.No.: As directed by Engineer in charge Godown 800 MT - Shed 206 Sqm. - Total -

Roof Gutter Roof Gutter (Assumed Girth - 600mm) PPGL sheets of 0.5mm thick Supplying, fabricating,erecting in position PPGL Eaves Gutter of required size with stop ends all fixing accessories, drop ends etc. at all elevations levels & heights including aligning, leveling, providing and fixing bolts, nuts, washer etc. confirming to latest specifications including straighteing, cutting, welding, bending to shape, bolting etc. completed and ad directed as per Engineer in charge. Spec.No.: As directed by Engineer in charge. Godown 800 MT - Shed 206 Sqm. - Total -

Downtake Pipe Providing and fixing of the rain water down take pipes of PPGL the sectional area of rain water down pipes provided shall be generally at the rate of 1 square cm per 70 to 80 square decimeter of roof area drained. No spout shall be less than 80mm in diameter. The spacing of spouts shall be arranged to suit the position of openings in the wall including necessary accessories for fixing the pipe and including all materials and labour charges etc. completed as shown in drawings as per specifications and as directed by Engineer in charge. Spec.No.: As directed by Engineer in charge. Godown 800 MT - Shed 206 Sqm. - Total -

Polycarbonate Sheet Supply & Fixing of 2mm. Thk. Polycarbonate sheets as per drawing & as directed by enginner-in-charge. Spec.No.: As directed by Engineer in charge. Godown 800 MT - Shed 206 Sqm. - Total -

Turbo Ventilators Supply & Fixing of turbo ventilators with 610mm throat having base ring & top plate in stainless steel of 0.8mm thick, rotated using twin bearings of SKF - 600122 & 600322 permanently lubricated & sealed. Fixed in FRP base plate of 2mm. Thk, clear 1.020mtr. wide & 1.7mtr long Godown 800 MT - Shed 206 Sqm. - Total - Spec.No.: As directed by Engineer in charge. Godown 800 MT - Shed 206 Sqm. - Total -

Sub-Work No.- 3 Internal Bituminous roads

Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area . Spec.No. : MORTH 201 (SSR Sr No.84, Item No.21.02)

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Vibratory roller. to the required density. By Mechanical Means - Grading I (Using Screening Type A (13.2) mm Aggregate) Spec. No. : MORTH 404 (SSR Sr.No.128, Item No.3.18)

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means - Grading II (Using Screening Type B (11.2 mm) Aggregate) Spec. No. : MORTH 404 (SSR Sr.No.130, Item No.3.20)

Providing and constructing 75 mm. thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 mm. stone metal layers 30% crusher broken metal + 70% Hand broken (by breaking rubble obtained by blasting) heating and spraying the bitumen of specified grade @ 2 Kg/sqm, spreading 12 mm.size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. Including picking of existing WBM surface. (VG-30 bulk bitumen rates are considered to arrive at rates) Spec. No. : IRC-SP-20, 2002 Clause No. 8.7.3 (SSR Sr.No.145, Item No.3.35a)

Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and Seal coat. For Bitumen of specified grade--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller ( Over MPM Surface) (VG-30 bulk bitumen rates are considered to arrive at rates) Spec. No. : MORTH 510 (SSR Sr.No.167, Item No.4.12)

9 MM SEAL COAT: Providing and laying of Type A 9mm premix seal coat with HMP of apropriate capacity crushed stone chiping 6.7 mm size and penetration bitumen of specified grade @ 1.2kg/Sq.m, preparing existing road surface by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete.(VG-30 bulk bitumen rates are considered to arrive at rates) Spec. No. : MORTH 511 (SSR Sr.No.168, Item No.4.13)

Supplying hard murum/ kankar at the road site, including conveying and stacking complete. Spec. No. : (SSR Sr.No.102, Item No.2.29a)

Spreading hard murum/ soft murrum/ gravel or kankar for side width complete Spec. No. : (SSR Sr.No.104, Item No.2.30)

Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete. Spec. No. : (SSR Sr.No.105, Item No.2.30)

Sub-Work No. -4 Electrification Work

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 6 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Spec.No.: CB-LT/AL (Item No.7-1-9, Page No.125) Godown 800 MT - Shed 206 Sqm. - Total -

Making trench in soft soil having 0.75 m depth and minimum 0.3 m width for laying provided cables up to voltage level of 1.1kV complete As per specification No. CW-EXN-CTR Spec.No.: CW-EXN-CTR (Item No.16-1-1, Page No.238) Godown 800 MT - Shed 206 Sqm. - Total -

Making trench in Hard murum/Tar road having 0.75 m depth and minimum 0.3mtr width as per IS for laying provided cables up to voltage level 1.1Kv cable complete as per specification No. CW-EXN-CTR Spec.No.: CW-EXN-CTR (Item No.16-1-2, Page No.238) Godown 800 MT - Shed 206 Sqm. - Total -

Supplying and erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW Spec.No.: WGMA/BW (Item No.1-3-6, Page No.5) Godown 800 MT - Shed 206 Sqm. - Total -

Supplying & erecting CRCA sheet metal enclosures of 1.2mm thickness with 10A, 2 pin plug & earth socket and 10A, 3 pin plug top with 10A single pole MCB having rated short - circuit breaking capacity (Icn) 10kA complete erected on angle iron / GI frame. Spec.No.: WGMA/BW (Item No.5-4-10, Page No.92) Godown 800 MT - Shed 206 Sqm. - Total -

Point wiring for light/fan/bell in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire with flush type switch and required accessories as per specification No: WG-PW/SW Spec.No.: (Item No.1-7-3, Page No.12) Godown 800 MT - Shed 206 Sqm. - Total -

Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22 /E-27 base. Spec.No.: (Item No.2-8-11, Page No.34) Godown 800 MT - Shed 206 Sqm. - Total -

Supplying and erecting integrated LED street light fitting 18 to 22W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 1800 Lumens, min. efficacy of 100 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50,including driver complete with 3 Years warranty as per specification No FGODF/FLS2. Spec.No.: (Item No.2-4-1, Page No.28) Godown 800 MT - Shed 206 Sqm. - Total -

Supplying and erecting Street light bracket made from 40 mm. dia ‘B’ class G.I. Pipe, 0.6m. in length along with pole cap of 300 mm length and 80 mm dia duly welded with provided leads as per specification no. FG-BKT/BPC Spec.No.: (Item No.2-7-2, Page No.32) Godown 800 MT - Shed 206 Sqm. - Total -

Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no.EA-EP Spec.No.: (Item No.9-1-1, Page No.160) Godown 800 MT - Shed 206 Sqm. - Total -

Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no.EA-EP Spec.No.: (Item No.9-1-4, Page No.160) Godown 800 MT - Shed 206 Sqm. - Total -

Supplying, erecting & marking DPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB Spec.No.: (Item No.5-3-6, Page No.90)

Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB Spec.No.: (Item No.5-3-3, Page No.90)

Supplying and erecting GI sheet 1.6 mm (16 SWG) having zinc coating of 350 microns with galvanization process compliance to IS 2629:1985 to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint. Spec.No.: (Item No.6-1-6, Page No.106)

Supplying and erecting marine (Waterproof) plywood 18/19 mm thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners, supports, nut bolts etc. complete with compliance to IS 720:2010 Spec.No.: (Item No.6-1-14, Page No.107) Godown 800 MT - Shed 206 Sqm. - Total -

Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/ 4 pole MCCB as incomer & outgoing SP MCB (12 poles) or TP MCB of 4 ways (12 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB1 Spec.No.: (Item No.5-4-15, Page No.93) Godown 800 MT - Shed 206 Sqm. - Total -

Supplying & erecting G.I. pipe ‘A’ class 25 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE Spec.No.: (Item No.7-6-1, Page No.139) Godown 800 MT - Shed 206 Sqm. - Total -

Supplying & erecting G.I. pipe ‘A’ class 40 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE Spec.No.: (Item No.7-6-2, Page No.140) Godown 800 MT - Shed 206 Sqm. - Total -

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. Spec.No.: (Item No.7-6-10, Page No.140) Godown 800 MT - Shed 206 Sqm. - Total -

Supplying & erecting single compression type brass cable glands for 3 to 4 core 6 sq mm /2 to 4 core 10 sq mm for XLPE armoured cable as per specification No. CB-GL Spec.No.: (Item No.7-7-2, Page No.141) Godown 800 MT - Shed 206 Sqm. - Total -

Supplying and erecting Ceiling rose / Batten holder / Slanting holder /hanging cord switch / hanging bell push / pendant holder bakelite base 6A. erected on filled polypropylene board or polished double wooden block/PVC junction box. Spec.No.: (Item No.1-5-7, Page No.7)

Point wiring for independent plug in 20 mm metal conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type switch, earthing and required accessories as per specification No: WG-PW/SW Spec.No.: (Item No.1-7-2, Page No.11)

Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WGPW/CW Spec.No.: (Item No.1-7-26, Page No.13)

Supplying & erecting mains with 2x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/BW Spec.No.: WGMA/BW (Item No.1-3-2, Page No.5) Godown 800 MT - Shed 206 Sqm. - Total -

Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW Spec.No.: (Item No.1-3-3, Page No.5) Godown 800 MT - Shed 206 Sqm. - Total -

Supplying and erecting modular type D.P. switch 32A with indicator, duly erected on provided plate and box with wiring connections complete. Spec.No.: (Item No.1-6-8, Page No.8) Godown 800 MT - Shed 206 Sqm. - Total -

Supplying, erecting and marking double pole isolator only switch version of miniature circuit breaker of 40A with required wiring connections and lugs etc. in provided distribution board. Spec.No.: (Item No.5-3-14, Page No.90) Godown 800 MT - Shed 206 Sqm. - Total -

Supplying & erecting 3W, 230V integral type LED Lamp suitable for B-22 / E-27 base. Spec.No.: (Item No.2-9-9, Page No.34) Godown 800 MT - Shed 206 Sqm. - Total -

Supplying and erecting IP65 and IK08 rated UV shielded polycarbonate waterproof and dustproof industrial grade LED fitting (4 feet) max. 36W with high transitivity diffuser with system lumens output of min. 4300 lumens,min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50 , IP20 rated, including driver with auto cutoff & auto restart feature at 325V with end caps on PVC Block/wooden board with 3 years warranty. Godown 800 MT - Shed 206 Sqm. - Total - Spec.No.: (Item No.2-2-1, Page No.26)

Royalty charges

murum

Soling 80mm

Testing Charges

M20 CONCRETE: Concrete Mix Design (With all Tests on basic materials)

M20 CONCRETE: Compressive Strength OF C.C. Cube (Set of 3

M10 CONCRETE: Compressive Strength OF C.C. Cube (Set of 3 cubes).

BRICKS : Water Absorption (Set of 5 Bricks), Compressive strength (Set of 5 Bricks), Efflorescence (Set of 5 Bricks)

TMT STEEL : (Tensile strength, %, Elongation, Yield Stress,Weight-Per Meter, Bend / Rebend Test, Proof Stress.)

Sand :- i) Fineness Modulus, II) Silt content

Murum :- ii) Atterberg Limit iii) Density of compacted layeriv) Proctor Test

Bitumen Penetration, Viscocity,Extraction test for Bitumen Mix.

Crushing Value/Compressive Strength, Water Absorption & Specific Gravity,

Cement Test i) Comprecive strengh ii) Intital and final setting time iii)Spcific Gravity iv) Spicific Gravity v) soundness vi) Finess

METAL Gr I & Gr II Agrregates AIV Test, Gradation,Water Absorpation Test,Crushing Value

Management Strategies and implementation plan (MSIP) to manage the Environmental Social Health and safety (ESHS) risks and ESHS Code of Conduct

ML BAJAJ & COMPANY