44/SE(T)/AMAUSI ZONE/2025-26

a-400 KV T/F

b-250 KV T/F

c-63 KV T/F

d-100 KV T/F

e-ACSR Rabbit Conductor

f-STP Pole 11 Mtr. Long

g-11 KV 3x185 Sqmm XLPE Cable Single/Double CKT

h-11 KV Pin Insulator

i-Top Channel

j-Dropper Channel

k-Stay Set Complete

l-Earthing Rod Complete

m-33 KV 3x185 Sqmm O/D, I/D, S/TH C/J Kit

n-PCC Pole 8.5 Mtr Long

o-LT Cable 1x240/400 Sqmm

p-Cable LT ABC (3x120) Sqmm`

q-Pin Insulator

r-GI Pin With Nut

Dragging of ST/PCC Pole digging of pit erection of sub-station type double pole structure on ST/PCC Pole with fixing of necessary item such as Top Channel, along with grouting (As per RESPO Norms) Dropper Channel, 11 pin insulator with Pin & 11 KV Disc Insulator with fitting, DO Fuse set its ramming, as per RESPO Specification. Only centralized material will be Provided by the Department.

Dragging of PCC Pole from Dump Store to pit site, digging of pit erection and grouting (As per RESPO Norms) of LT support suitable for laying of ABC Line on 8.5 Mtr Long PCC Pole by providing of necessary eye hook/Lt Shackle insulator with Clamps and its accessories etc. as per RESSPO Specification. Only centralized material will be Provided by the Department.

Laying Stringing & sagging of 3 Phase 3 wire 11 KV New Line on ACSR Wessel/Dog/raccoon/Rabbit conductor as per RESPO Specification and direction on E/I. All material except ACSR weasel/raccoon/Rabbit conductor shall be supplied by the contractor.

Proper laying & commissioning of (3x50/3X95/3X120 sq.mm) Aerial Bunched Conductor. Only ABC Provided by deptt.

Well type/Bore type earthing of with 60 Fit Deep boring and providing GI Pipe 1.5" dia ("B" Class) and earthing must be joint by G.I. Strip of 32x5 mm thick long attached with nut & bolts and GI pipe cap. All material and labour shall be supplied the contractor.

Construction of T/F plinth of size 2x2x1.2 mtr with the help first class brick & masonry in the ratio 1:4 cement & sand coarse. Filling the structure completely per norms with RCC to 1:2:2 cement & stone grit with MS bar and MS channel for resting transformer.

Wiremess fencing of 11/0.4 KV S/S shall be made of rectangular of size as per site requirement not exceeding 3 meter fabrication 45x45x5 mm angel the frame is also have 1 no. Horizontal runner of MS flat 40x5 welded in middle to support of wire mesh. Rectangular welded type wire mess of size 50x25 made of 12 S.W.G. wire mess shall be welded all along the periphery of the frame as well as on horizontal runner to give extra strength of welding to wire mess welded on the frame. Diagonal bracing of all the frame panel will be welded with Ms flat of size 25x3mm to support as per RESPO specification & direction of E/I.

Construction of masonry/metallic type distribution pillar of size 1x1.5x2.5 mtr. with supply & fixing of fabricated 4 nos. doors (2ft.x4ft.) made of BP sheet of 18 SWG with locking arrangement, 2 Nos. Straight MS angle 50x50x6mm (1800 mm long) 2 nos. 500 Amp, 3 Nos. 300 Amp Henley Type tailless fuse Unit, 3 Nos copper bus bar of size 1000x50x6 mm and one No. Alum busbar 1000x50x6 mm including all civil material required for work. All material shall be supplied by contractor.

Fabrication, errection & commissioning of 63 KVA T/F on DP with all accessories. All material except 63 KVA T/F shall be supplied by the Contractor.

Fabrication, errection & commissioning of 100 KVA T/F on DP with all accessories. All material except 100 KVA T/F shall be supplied by the Contractor.

Fabrication, errection & commissioning of 250 KVA T/F on Plinth with all accessories. All material except 250 KVA T/F shall be supplied by the Contractor.

Fabrication, errection & commissioning of 400 KVA T/F on Plinth with all accessories. All material except 400 KVA T/F shall be supplied by the Contractor.

Dismantling of 25 KVA T/F opening jumbers, LT cable and Other accessories of T/F including Safe loading, unloading Carriage from site to JE dump Store/Center Store.

Dismantling of 63/100 KVA T/F opening jumbers, LT cable and Other accessories of T/F including Safe loading, unloading Carriage from site to JE dump Store/Center Store.

Dismantling of 250 KVA T/F opening jumbers, LT cable and Other accessories of T/F including Safe loading, unloading Carriage from site to JE dump Store/Center Store.

Laying of LT XLPE/PVC Cable 3.5X70/3.5X400/1x240/1x400/1x630 sq.mm. as per RESPO Norms. Only cable shall be supplied by department.

Cable Hosting of 11/33 KV 3x70/3x185/3x300 sq. mm XLPE Cable at the following including jumpering etc complete with help of GI Pipe as Per RESPO Norms. GI pipe and other required material shall be supplied by contractor.

Laying of 3X185 sq.mm 11 KV XLPE cable by drill method (single circuit) as per RESPO Norms. Only 11 KV XLPE cable supplied by Department.

High pressure testing of 11/33 KV 3x70/3x185/3x300 XLPE cable along with arrangement of High Pressure equipment.

Please Enable Macros to View BoQ information