Constriction of Warehouse for the Storage of EVMs VVPATs at Nahan Distt Sirmour HP SH Providing Electrical installation thereof

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required

Group-C

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with 2-way, 5/6 amps. modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group-C

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required.

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required

Supplying and fixing electrical switch board, having 3 No. of 5 amp. switches and socket on suitable size of metal box of mm deep 6 modules(205mmx78mmx50mm on surface or in recess with suitable size phenolic laminated sheet cover in the front i/c providing and fixing 3 No. 5 pin 5/6 amp socket outlet and 5/6 amp modular type switch, connection, painting etc.as req.(For light plugs)

Supplying and drawing LAN cable CAT6 , (Electrolytic grade solid annealed bare copper conductor, 4 Pair unshielded twisted pair (UTP) Industrial cables for LAN Network.

Supplying and fixing of 16 port switch ,Make D-link or at par in Bosch, Legrand or any other approved by Engineer in charge

Supplying and fixing of Rack for 16 port switch ,Make D-link or at par in Bosch, Legrand or any other approved by Engineer in charge

Providing and fixing D link I/O Box (i/o, face plate, box), Make:- Dlink, legrand or any other approved by engineer in charge

Providing & fixing RJ45 connector , Make:- D link, or any other approved by engineer in charge

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:- 25mm dia.

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required

2x1.5 Sq. mm.

2x2.5 Sq. mm.

2x6.0 Sq. mm.

2x 10 Sq. mm.

Wiring for circuit / sub-main with 4x16 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.16 Sq.mm. (4x16+2x16) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Double pole. Cat-A.

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Single pole. Cat-A.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections,phosphatized and powder painted, including earthing etc. as required:-

Double door- 12 way

Double door-8 way

Double door-4 way

S/f stepped type modular fan regulator on the existing modular box including making connections etc as required

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:-

Ceiling Fan 1200 mm sweep, Category-A

Ceiling Fan 1400 mm sweep, Category-A

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Nonreturn valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required:-

25 litre capacity

Providing and installation of following type of ultra slim decorative LED batten with extruded aluminium channel provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver SMPS : AC 140-270 Volt ,operating temp-10to 45 c :- 50/60Hz, complete with all accessories, including mounting clips & loop in loop out wire, connections, testing and commissioning etc. as required. Make: Philips, Havells, Bajaj, Panasonic or any other approved by Engineer-in-Charge.LED Batten 20 watt

Providing and installation of following type of ultra slim decorative LED batten with extruded aluminium channel provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver SMPS : AC 140-270 Volt ,operating temp-10to 45 c :- 50/60Hz, complete with all accessories, including mounting clips & loop in loop out wire, connections, testing and commissioning etc. as required. Make: Philips, Havells, Bajaj, Panasonic or any other approved by Engineer-in-Charge.LED Batten 10 watt

Providing and installation of following type of surface mounting slim square type LED panel in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. as required. Make: Philips, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge. LED Panel Light 30 W(2*2 foot)

Providing and installation of following type of surface mounting slim square type LED panel in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. as required. Make: Philips, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge. LED Panel Light 24W(1*1 foot)

Providing and installation of following type of surface mounting slim square type LED panel in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. as required. Make: Philips, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge. LED Panel Light 18W(1*1 foot)

Providing and installation of following type of surface mounting slim square type LED downlight in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. as required. LED down Light 15 W. Make: Philips, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge.

Providing and installation of following type of surface mounting slim square type LED downlight in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. as required.LED Downlight Light 9W Make: Philips, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge.

Providing and installation of following type of surface mounting slim circular type LED Downlight in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. as required.LED Down Light 12W Make: Philips, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge.

P/F ,Surface mounted powder coated die cast aluminium and anodized aluminium reflector with clear diffuser fully adjustable Focus light including testing connections and commissioning etc as required with CCT 5000K LED 10 Watt . , item code:- LFCL01R010XC Make:- Jaguar , Philips or any other approved by Engineer in charge.

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages,connections, testing and commissioning etc. as required:-

Exhaust Fan, Light duty, (Domestic) 300 mm sweep

Exhaust Fan, Heavy duty, (Domestic) 300 mm sweep

P/F Openable sheet metal shutter suitable for Exhaust fan size 300 mm as required complete in all respect.

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:-

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-

Armoured cable 35 sq. mm (3.5 core)

Armoured cable 4 sq. mm (twin core)

Supplying and erection of sheet metal main cubical pedestal (confirming to(IEC code-61439) of indoor type, single door floor/wall mounted ,fixed type free standing single front,dust proof ,dimensions650mm(H)*450mm(W)*200mm(D) with plus 5cmm variation,made out of MS CRC sheet 16G Base frame channel 75mm*40mm*3mm duly painted with siemens grey powder coated ,fabricated in a segregated manner for housing of switch fuse units,by welding each compartment on five sides &front sides hinged,complete with locking arrangements including 1 No. MCCB 100 amp(4 pole), with 1 No. 100 amp. Copper Bus bar, metering module & indicating lamp set.The cubical pedestal shall have cable entry box at one or two sides,with epoxy powder coated approved paint and bonding to the existing earth etc.The same shall be erected in the 1:2:4 cement concrete platform of suitable dimensions 15 cm high from ground level and 45 cm thick.The cubical pedestal shall be 15 cm from the top of cement concrete platform.

Supplying and erection of light sub - panel (confirming to(IEC code-61439) of indoor type,single door , floor/wall mounted dust proof dimensions 650mm(H)*450mm(W)*200mm(D) with plus 5cm variation,made out of M.S CRC sheet 16G Base frame channel 75mm*40mm*3mm fabricated in a segregated manner for housing of switch fuse units,by welding each compartment on five sides &front sides hinged,complete with locking arrangements to house 32 amp MCCB ,63 amp Copper busbar & 1 set RYB light indicator and cable alley as required complete in all respects including the cost of switchgear . The cubical pedestal shall have cable entry box at one side,with epoxy powder coated approved paint and bonding to the existing earth etc.

Supplying and erection of Heating sub - panel (confirming to(IEC code-61439) of indoor type,single door , floor/wall mounted dust proof dimensions main LT panel single front 650mm(H)*450mm(W)*200mm (D) with plus 5cm variation ,made out of M.S CRC sheet 16G Base frame channel75mm*40mm*3mm fabricated in a segregated manner for housing of switch fuse units,by welding each compartment on five sides &front sides hinged,complete with locking arrangements to house 63 amp MCCB ,63 amp Copper busbar & 1 set RYB light indicator and cable alley as required complete in all respects including the cost of switchgear . The cubical pedestal shall have cable entry box at one side,with epoxy powder coated approved paint and bonding to the existing earth etc.

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.

Supplying and laying 8 SWG Copper wire at 0.50 mtr. Below ground level for earth electrode conductor, including soldering etc. as required.

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for vertical run)

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for horizontal run)

Providing and fixing of lightning conductor finial, made of 25 mm dia. 300 mm long copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required.

Supply and installation of BAJAJ make Hot dip galavanised iron pole having wall thickness 3 mm. C/s A/F - top = 70mm, bottom =130 mm, base plate 220x220x12 mm, 500 mm long weatherproof reinforced door opening with junction box mounting arrangement inclusive of Sleek junction box with one 6A SP MCB and 16Sqmm stud type connector, suitable arm bracket 1 m, 20mm dia. threaded made to J shape and having 450 mm total length steel grade EN8 foundation bolts - 4 x16 mm dia. with nuts, templates and all complete as per approved drawing. Foundation RCC 1:2:4 shall be of size 550x550mm and depth 1200 mm c/c as per approved drawing.The foundation shall extend above sorrounding ground/driveway level for 200 mm and have slant 63mm dia. PVC sleeve cast insitu foundation for cable entry as per the drawing, complete in all respects as required:-G.I. Octagonal Light Pole - 5 m long, Single Arm bracket .

Providing & fixing 45 W LED street light fitting with IP66 protection consist of Pressure die-cast aluminium alloy for housing (heat sink) for effective thermal management, sturdiness & excellent corrosion resistant Finish with Epoxy powder coated grey after phosphochromate treatment for Nominal Voltage (V) 240 V, mains current .330 A Make: Philips, Bajaj, C&S,Havells or any other approved by Engineer-in-Charge.

Supplying and laying of DWC pipe with the accessories in surface/recess including cutting the wall and making good etc. as required complete in all respect as directed by Engineer in charge.

DWC pipe size 40/32 mm outer Dia/inner Dia

DWC pipe size 50/38 mm outer Dia/inner Dia

Kalra Hardware and Electric Store

Shyam Radio and Electrical