Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹15.3 LAccepted-AOC H NO 816 NEAR GANDHI CHOWK KALKA 133302 HARYANA | KALKA | PANCHKULA | HARYANA | 133302 | 1 | Accepted-AOC BEING LOWEST | |
| 2 | 2₹17.2 L+₹1.2 L (7.47%)Rejected-Finance | 2 | Rejected-Finance BEING NOT LOWEST | |
| 3 | 3₹18.2 L+₹2.2 L (14.0%)Rejected-Finance | 3 | Rejected-Finance BEING NOT LOWEST | |
| 4 | 4₹18.9 L+₹2.9 L (18.1%)Rejected-Finance H NO 74 6 JUTOGH CANTT SHIMLA HP 171 008 | SHIMLA | HIMACHAL PRADESH | 171008 | 4 | Rejected-Finance BEING NOT LOWEST | |
| 5 | 5₹19.1 L+₹3.2 L (19.8%)Rejected-Finance VILL PO POOH DISTT KINNAUR 172111 HP | KINNAUR | HIMACHAL PRADESH | 172111 | 5 | Rejected-Finance BEING NOT LOWEST |
Tender Value
₹16.2 L
EMD Value
₹32,440
Closing Date
22 Oct 2022, 6:00 pmClosed
GE 863 EWS
GE 863 EWS C/O 56 APO
SPECIAL REPAIR TO BLDG NO T306 AND T307 OTHER RANK BATHROOM AND TOILET BLOCK OF 172 MED REGT AT PRITHI MIL STATION IN THE AREA OF AGE BRII PMS UNDER GE 863 EWS
2022_MES_554091_1
GE863/EWS-T-30 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
AVERIPATTI
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE 863 EWS
₹32,440
Yes
9 Jan 2023
24 Sept 2022
24 Oct 2022
24 Sept 2022
22 Oct 2022
8 Oct 2022
Amount
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.
M&L 25mm thick cement concrete type B-0, 1:2:4 (12.5mm graded stone aggregate ) as in sub flooring complete all as specified and directed.
M&L for Non-skid ceramic tiles, coloured, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sq m but not exceeding 0.18sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed.
M&L 75mm thick PCC 1:3:6 Type C-1 using 20mm crushed stone aggregate as in plinth protection and finished even and smooth without using extra cement complete all as specified and directed.
M&L 100mm thick PCC 1:2:4 Type D-2 using 40mm graded stone aggregate as in flooring finished even and smooth without using extra cement complete all as specified and directed.
Taking down cement or cement lime plaster any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
Taking down chowkats or frames (without taking off shutters from the frame) area exc 1.5 Sqm but n.exc 4.0 Sqm each complete all as specified and directed.
S&F solid PVC door frame of sixe 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawings complete all as specified and directed.
S&F factory made solid panel PVC Door shutter 30mm thick (Style) consisting of frame made out MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet stripof 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, & bottom rail; Panneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawings complete all as specified and directed.
S&F 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F 250mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.
S&F 125mm aluminium handles, cast type ,anodised and pattern/design as approved complete all as specified and directed.
S & F butt hinges, 100mm medium weight, cold rolled mild steel complete all as specified and directed.
Hacking out old broken glass (any thickness) , size, quality or description ) from metal frame including punching or drilling out old glazing pins complete all as specified and directed.
S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n,exc 0.5 Sqm, each pane complete all as specified and directed.
Dismantling fibre sheet in roof covering any type and size complete all as specified and directed.
S&F 2mm thick fibre glass reinforced translucent plain/corrugated sheeting with two corrugations side lap fixed with screw complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting, any guage, thickness from roof covering complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.
S&F Mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, Tee, angle channel or flat sections) including distance pieces, cleats etc.(Fe-410-W(Gde E-250) Quality-A) complete all as specified and directed.
S&F Mild steel work as in compound girders and stanchions, latticegirders, aerial masts, staging for water tanks and like including caps bases, splices etc built up from two or more beam or channel sections or angles with plates or pipe section including all lattice bars, stiffeners, gusset plates etc..(Fe-410-W(Gde E-250) Quality-A) complete all as specified and directed.
Removing of old unserviceable water storage PVC tank of capacity exc 1000 & n exc 2000 litres of any type after and including disconnecting of existing pipe line, ball valve, air pipe etc and supply and fix new rotational moulded polyethylene water storage tank 1000 ltrs capacity (cylindrical vertical with closed top ,with screwable lid) , double layered ,ISI MARKED , hoisted and fixed in position at any height including reconnetcing/refixing of pipes inlet , out let andair pipe, including S&F 20 mm bore ball brass valves, high pressure, with polythene float and flynut ball valve, and testing complete all as specified and directed.
Taking up or down 15 mm bore steel tubing with connections or fittings from wall, ceiling, floor etc.,including cleaning for refixing or removing from site , complete all as specified and directed.
S & F 15mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, fixed to walls and ceiling or laid in floors, including cutting existing steel tubing & screwing, if required for alterations and additions , complete all as specified and directed.
All as per srl item No 26 here in before but except pipe or G I tubing (serviceable pipes/GI tubing as obtained from Srl item No 25 shall be used).
Taking up or down 20 mm bore steel tubing with connections or fittings from wall, ceiling, floor etc.,including cleaning for refixing or removing from site , complete all as specified and directed.
S & F 20mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, fixed to walls and ceiling or laid in floors, including cutting existing steel tubing & screwing, if required for alterations and additions , complete all as specified and directed.
All as per srl item No 29 here in before but except pipe or G I tubing (serviceable pipes/GI tubing as obtained from Srl item No 28 shall be used).
S&F in repairs bib taps, cast copper alloy, chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15 mm bore steel tube complete all as specified and directed. Make: MARC /ESS ESS / JAINKO / PRAYAG/ HINDWARE / JAQUAR / PRIMA.
S&F in repairs 15mm bore stop valve/angle valve cast copper alloy chromium plated fancy type screwed down, high pressure, with crutch or butter fly handles complete all as specified and directed. Make: MARC /ESS ESS / JAINKO / PRAYAG/ HINDWARE / JAQUAR / PRIMA.
Supply and fix in repair , PVC low level, white, flushing cistern, valve-less, symphonic action type, 10 litres capacity with inlet, ball valve, float and handle including PVC flush pipe 32 mm dia with bend and a pair of mild steel angle iron brackets of suitable size including making necessary connection to water supply pipe line and WC, complete all as specified and directed. MAKE : HINDWARE/PRAYAG/JAQUAR/ PARRYWARE/ CERA.
Supply and fixing , in repair ,first quality , water closet (squatt pattern) including foot rest , vitreous china (white) , Orissa pattern, size 580x440mm with integral foot rests, including 100mm cast iron 'P' or 'S' trap and 100mm cast iron sanitary connection socket to fit WC outlet , complete including fixing of flush pipe with seat and making good the disturbed floor surfaces to match with existing and making connections serviceable, complete all as specified and directed. MAKE : HINDWARE/PRAYAG/JAQUAR/ PARRYWARE/ CERA.
Supply and fix, Vitreous China wash down water closet EWC (pedestal pattern), white (including fixing bolts, flushing cistern and flush pipe), plastic seat and cover white, closed pattern with flat bottom, mild steel chromium plated or anodised hinging devices, connected to drains outlet including chromium plated steel jet pressure unit, fixed as in repairs, and removal of old from site, complete all as specified and directed. MAKE : HINDWARE/PRAYAG/JAQUAR/ PARRYWARE/ CERA.
S&F in repair , Chromium plated jet for EWC, complete, all as specified and directed.
S&F in repairs , first quality , Wash basins, vitreous china, white, flat back of size 550x400mm including brackets and cutting for and pinning in ends of brackets or erecting stand , 32mm dia waste fittings, brass, chromium plated with long screwed shanks and fly nuts, 32mm dia HDPE waste pipe and including new brackets, complete all as specified and directed. MAKE : HINDWARE/PRAYAG/JAQUAR/ PARRYWARE/ CERA.
S&F in repairs vitreous China Urinal, half stall type, white with 32mm bore PVC waste pipe of length 900mm to 1200mm and including urinal spreader of PTMT any colour for fixing with 15mm dia pipe including connection to flushing pipe and outgoing pipes with 32mm bore PVC waste pipe of length 900mm to 1200mm complete all as specified and directed. MAKE : HINDWARE/PRAYAG/JAQUAR/PARRYWARE/CERA.
S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm in repairs complete all as specified and directed.
S&F in repairs Brass chromium plated shower rose 125mm size for iron pipe or for unions and fixed to 15 mm bore steel tube complete all as specified and directed. Make: MARC /ESS ESS / JAINKO / PRAYAG/ HINDWARE / JAQUAR / PRIMA.
Towel rail 600 mm long, 20 mm dia, ‘D’ type, brass chromium plated, fixed to walls with screws and plastic cleats, fixed in repairs, complete all as specified. Make: MARC /ESS ESS / JAINKO / PRAYAG/ HINDWARE / JAQUAR / PRIMA.
S&F in repairs Soap dish, cast copper alloy, chromium plated with screws complete all as specified and directed. Make: MARC /ESS ESS / JAINKO / PRAYAG/ HINDWARE / JAQUAR / PRIMA.
S&F in repairs 110 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F in repairs 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F in repairs 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
M&L one coats of synthetic enamal paint to steel surfaces of any discription not otherwise described over 10cm width or girth including preparation of old surfaces complete all as specified and directed.
M&L 15mm thick rendering on brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement (with water proofing compound) complete all as specified and directed. Note: WPC shall be measured & paid seperatly under respective item.
M&L two coats cement base paint on plastered surface including preparation of newly plastered surfaces complete all as specified and directed.
M&L chequered cement concrete tiles 30cmx 30cmx 25mm thick,set, jointed & pointed in neat cement slurry in floors with grey cement and pigments over & including 20mm thick screed in cement mortar 1:6 complete all as specified and directed.
M&L for 75 mm thick P.C.C 1:4:8 type D-2 using 40mm graded stone agg as in sub base of floor ETC., complete all as specified and as directed.
Excavation in trenches not exc 1.5 metre wide and n.exc 1.5 metre in depth for pipe line, drains, foundations of sewarage lines or manholes and like and getting out in hard/dense soil ,complete, all as specified and directed.
M&L PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete, complete, all as specified and directed.
Demolition of precast cement concrete block walling masonary, built in cement mortar or cement lime mortar incl all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and directed.
M&L for precast cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in block masonary with solid blocks exc 10 cm in width and not exc 20cm in width and setting in cement mortar 1:6,complete, all as specified and directed.
M&L three coats of white wash on plastered surface including preparation of newly plastered surfaces ,complete, all as specified and directed.
Supply only integral water proofing compound complete all as specified and directed.
Returning, filling in, spreading, leveling watering and well ramming in layers n.exc 25 cm thick , each layer , in soil , complete, all as specified and directed.
Removing excavated soil to a distance not exc 50 mitre and depositing where directed at a level not exc 1.5 metre , above starting point complete all as specified and directed.
M&L cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in bed to drain pipe, incl packing under and haunching against the sides of pipe of 150mm bore after they are laid and tested complete all as specified and directed.
Demolition and breaking up drain pipes (salt, glazed & stone ware, AC or reinforced concrete), 150mm internal dia of any description set in cement mortar complete all as specified and directed.
M&L 150mm internal dia reinforced concerete pipes, class NP2, laid and jointed complete, with collars and jointed, complete, all as specified and directed.
Demolition of RCC work of any description and any position complete all as specified and directed.
M&L for precast RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slab and like,set in cement mortor 1:4 complete including necessary form workcomplete all as specified and directed.
M&L mild steel TMT bars 6-8mm dia bar cut to length, bent to shape required including cranking, bending spirally for hoping for fencing posts and binding with mild steel wire (annealed) not less than 0.9 mm dia, complete , all as specified and directed.
Demolition of septic tank and soakage well , including desilting/desludging the septic tanks/ soakage wells etc by mechanical means and removing the sludge in liquid or semi-liquid state out side defence land and filled with earth and levelled the area of septic tank and soakage well complete all as specified and directed. Capacity of tank.
M&L for Construction of 50 users Septic tank to carry sewage and sullage water, complete all as specified and shown in Drg No. STD 1320 (C) Sheet 1/3 to 3/3 and directed. Note:- (a) Excavation and earth work shall be in any type of soil. (b) Precast cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) block masonry with solid blocks, set in CM 1:4 shall be used in walls in lieu of Brick masonary as shown in drawings. (c ) The width of Precast cement concrete (20mm graded stone aggregate ) type C-1 block masonry in walls shall be as 700 / 600 / 500 / 400 mm in lieu of width of Brick masonary 690 / 575 / 460 / 345 mm respectively as shown in drawings. (d) RCC work where ever shown in drawings as in base slab, baffle walls , Vent shaft, manhole openings with cover connection, roof slab etc . shall be M-25 Design mix, type B1 using 20 mm graded stone aggregate. (e) The cost of all above provisions and other provisions as shown in drawings shall be deemed to be included in quoted rates of this item and nothing extra shall be entertained on this account.
M&L for Construction of Soakage well 1.80 m dia and 3.0 m effective depth complete all as specified and shown in Drg No. STD 1173 (C) Sheet 1R/2 and as directed. NOTE:- (a) Excavation and earth work shall be in any type of soil. (b) foundation in PCC 1:3:6 type C2 using 40 mm graded stone aggregate. (c) Honey combing brick walls masonry as shown in drawing. (d) RCC work where ever shown in drawings shall be M-25 Design Mix, type B1 using 20 mm graded stone aggregate (e) The cost of all above provisions and other provisions as shown in drawings shall be deemed to be included in quoted rates of this item and nothing extra shall be entertained on this account.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for taking credit and making good to disturbed surfaces of walls, floors, etc. complete all as specified and directed.
M & L for point wiring using approved colour coding as per IS by using FRLS PVC insulated 1.5 Sqmm multistranded,1100 volt grade copper conductor cable unsheathed type, alongwith 1.5 Sqmm FRLS PVC insulated stranded copper conductor cable for continous earthing in & incl PVC conduit with accessories having ISI mark fixed on wall surfaces / ceiling including provision of 2 mm thick sheet metal terminal box with 3 mm thick hylam laminated sheet on top for fixing switches sockets etc.for one light point/ fan point controlled by one switch complete all as specified and directed.
All as per Srl item No 70 here-in-before but for one 3 pin socket outlet 5 Amp on the independent board with other switches with cables 1.5 Sqmm .
All as per Srl item No 70 here-in-before but for one 3 pin socket outlet 15 Amp, independent board with other switches with cable 2.5 Sqmm.
Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make: Crompton / PHILIPS/HAVELLS/BAJAJ/WIPRO.
Supply and fixing in replacment surface & wall mounted LED 10 watts tube light fitting batten 2 feet, mirrorlite slim type with extruded aluminium housing alongwith 10 watts LED lamp PVC body with all accessories complete all as specified and directed. Make: Crompton Cat No. LDLL10-CDL or Equivalents in PHILIPS/HAVELLS/BAJAJ/WIPRO
Supply and fixing in replacement of LED 10 W Bulk head luminaire, compact modern design utility with high energy savings complete all as specified and directed. Make: Crompton Cat No. LBHP-10-CDL or equivelent of Havells/Wipro/Philips/Bajaj.
M & L for Lamp holder, PVC/Polycarbonate type with back plate suitable for batten / angle fittings with and including 7 Watts LED lamp of approved make complete all as specified and directed.
M & L for Switch piano, flush type single pole, one way 5 Amp complete all as specified and directed.
Supply and fix Socket outlet 2 in 1, 3 pin, 5A complete all as specified and directed.
M & L for Switch piano, flush type single pole, one way 16 Amp complete all as specified and directed.
M & L for Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type complete all as specified and directed.
Supply and fixing miniature circuit breaker (MCB) SPN 32 AMP rating 240V, 10KA 'C' curve , complete with connection testing and commissioning, complete, all as specified and directed.
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, complete with connection testing and commissioning ,complete, all as specified and directed.
Supply and fixing Sheet metal enclosure for DBs 8 way, double door, 240 Volt, with 200 Amps rates bus bar complete all as specified and directed.
Supply and fix Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified and directed.
Material & labour in repair earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 mtr depth below ground level at any type of strata) with top edge of the earth plate not less than 1.5mtr below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all around the plate. Connected with galvanised earth wire 4 mm dia by means of bolts, nuts hook nuts and washers as earth lead including concrete chamber of PCC 1:3:6 type C1 (using 20mm graded stone aggregate) with fair finish, internal surface of concrete chamber shall be given internal dia 300mmx300mm, 15mm thick plaster in CM 1:4) funnel with wire mesh, RCC pit cover of 320x320x80mm size in (1:2:4) Type B1 (using 20mm graded stone aggregate ) reinforced with XPM all as shown in electrical plate No 3 of MES SSR Part-1 (2009) and specified including and provision of GI wire upto 7.5 mtrs long with 15 mm bore dia light grade GI pipe for protection and watering pipe of GI 20 mm bore, medium grade, including all excavation and earth work and connecting the earthing wire to panel, including testing on completion complete all as specified and directed. Note : RCC pit cover shall be precast of RCC(1:2:4) type B1, 80mm thick reinforced with XPM weighting not less than 4kg/sqm in lieu of CI cover.
M & L for Wiring for circuit/submain wiring alongwith earth wire in PVC conduit with 2x6.0 sqmm + 1x6.0 sqmm earth wire of FR/FRLS in PVC insulated copper conductor, single core cable in surface/ recessed as required complete all as specified and directed.
Supply, laying, commisioining and testing in replacement cable XLPE insulated IS 7098 (Part-I)-1988, ISI marked, screened, PVC sheathed, steel armoured electric power cable (heavy duty) with aluminium stranded conductor for working voltage upto and including 1100 volts, cross sectional area of cable 10 sq mm 2.0 core laid in trenches/fixed on pole/wall/passed through pipe /cutting of road with making good wherever required as per site including jointing and testing complete all as specified & directed . NOTE: The earth work, GI Pipe shall be measured and paid seperatly under appropriate item of Schedule 'A' / BOQ.
M&L for Sand cushioning for under ground cables provided with a layer of sand 8 cm deep before laying the cable and 15 cm depth after punning down and stretching the cable complete all as specified and directed. Note: Consolidated depth of sand ie 180 mm shall be measured & paid.
M & L for Old size Bricks; common burnt clay building bricks, sub-class ‘B’ designation 75, laid perpendicular to the cable length for cable protection complete, all as specified and directed.
M & L for Tubes, 'light grade' 50 mm dia, galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
Note:- The total shall subject to adjustment of credit of Rs 61,197.00 for old Materials as per Schedule of Credit.
M/S Dahiya Builders
A P ENTERPRISES
M/S SHIV NATH ENTERPRISES
M/S Shamsher Negi Dewa
M/S Gopal Singh
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .