PROVISION OF FOUNDATION WORK FOR PREFABRICATED SHELTERS 02 NOS UNDER GE P BHANDUP

Amount

Excavation in trenches not exceeding 1.5m wide & n.exc.1.5m in depth for foundation etc & getting out in Hard/dense soil complete all as specified and directed.

M&L for PCC D2 type (1:4:8) using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar Type B-1 1:2:4 (20mm graded aggregate), complete all as specified and directed.

M & L for hardcore exc 63mm but n.exc 100mm gauge with broken stones, deposited, spread and levelled in layers n.exc 15 cm thick watered and remmed to a true surface as specified.

M & L for cement concrete 1:2:4 type B-2 using 40mm graded stone aggregae 200 mm thick as in foundations, filling and mass concrete including necessary from work and finishing surface fair and even complete all as specified and directed.

M & L for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregae 100 mm thick as in sub base to flooring including necessary from work end finishing surface fair and even complete all as specified and directed.

M & L for cement concrete 1:3:6 type C2 using 40 mm grade aggregate as in foundations etc. complete all as specified and direted by Enginner in Charge.

M & L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 m mean radius built CM 1:4 completed all as specified and directed.

M&L Rendering 15mm thick in CM 1:4 on fair faces of brick work with water proofing compound @ 3% weight of cement including finishing the surface even and smooth without using extra cement, complete all as specified and directed. Note : WPC shall be measured and paid seperately.

M & L for PCC (1:2:4) type B1, using 20 mm graded stone aggregrate as in coping including weathering, slightly rounded or chamfered angles and throating as directed. Complete all as specified and directed by Engineer in Charge.

M & L for PCC (1:2:4) type B1, using 40 mm graded sone aggregrate as in surface channel and drain, completed all as specified and directed by Engineer in Charge.

M & L for precast reinforced cement concrete 1:2:4 type B1 (using 20 mm graded agg) as in cover slab for manholes or drain cover etc set in CM 1:4 including necessary form work complete all as specified and directed by Engineer in Charge.

M & L for 150 mm dia salt glazed stone ware drain pipe Grade 'A' laid in trenches and jointed as specified. Complete all as specified and directed by Engineer in Charge.

M & L for concrete bed to drain pipe in CC (1:3:6) type C2 using 40 mm stone aggregrate including packing under, and haunching against the sides of pipe after they are laid and tested of 150 mm bore. Complete all as specified and directed by Engineer in Charge.

S & F TMT bars 08 mm dia and over cut to length, bend to shape require including cranking, bending spirally for hooking end and binding with and including mild steel wire not less than 0.9 mm dia all as per specified and directed.

Cutting in to existing manhole for connecting new drain and making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-I smooth finished, or cement mortar (1:4) and reforming benching as required. for 150mm dia pipe, complete all as specified and directed.

Supply only water proofing compound, complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide & n.exc.1.5m in depth for foundation etc & getting out in soft soil complete all as specified and directed.

Returning and filling in any type of soil, including spreading, levelling, watering and well ramming in layers n exc 25 cm., complete all as specified and directed.

Removing excavated material exc. 1.50 Km but n exc 5.0 Km and deposited where aall as specified and directed.

Demolition of cement concrete in ground floors and paving n exc 15cm thickness (Below or above ground level), complete all as specified and directed.

M&L for cement conrete 1:2:4 type B-2 (40mm graded aggregate 150mm thick floor fineshes), complete all as specified and directed.

Cutting existing steel tubing for alterations or addition (each cut measured), complete all as specified and directed.

M&L for galvanised tubes 40mm bore medium grade with all fitting laid in treanches, complete all as specified and directed.

M&L for galvanised tubes 20mm bore medium grade with all fitting laid in treanches, complete all as specified and directed.

Supply & fixing gate valve 25mm dia, complete all as specified and directed.

Supply & Laying PVC insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts graded cross sectional area 16 Sqmm 2 Core, complete all as specified and directed.

Supply and lay GI pipe light grade as cable protection laid on tench/floor fixed on pole/wall etc of 40mm bore, complete all as specified and directed.

M&L for unwashed dry sand filling in trenches for cable protection with locally availabe dry sand, 8cm below the cable and 15cm above the cable and punning down the same to 18cm all as specified and directed

Supply and laying unreinforced precast concrete cable covers, IS marked, factory made, class LV, type-1, flat size 250 x 150 x 40mm, complete all as specified and directed. Make Mehtab tiles/ Hind Mosaic as approved.

Supply and fixing MCB SPN 'C' curve 40 Amp, complete all as specified and directed.

R J ENTERPRISES

R K TYAGIS