CERTAIN BR REPAIR AND PERIODICAL SERVICES TO OTM ACCN AND REPAIRS TO WOODEN ALUMINIUM JOINERY WIREMESH ALUMIINIUM SHEETING REPAIRS TO BATHROOM KITCHEN TILING AT OLD RS COLABA UNDER AGE BRII OF GE NW NAVY NAGAR COLABA MUMBAI

Amount

Taking down cement plaster of anydescription in any position including racking out joints making key scrubbing down with water etc incl removing of the demolished materials to outside the MD land.

M&L for 20 mm thick plastering in two coats 15 mm thick backing coat in CM 1:6 and 5 mm thick setting coat in CM 1:4 mixed with water proofing compound @ 2% by weight of cement on fair faces of brick work or concrete wall surfaces finished even and smooth without using extra cement all as specified including scaffolding, Safety net etc all complete as directed by Engr-in-Charge. (Note :- work to be carried out upto G+14th floor & WPC shall be measured and paid separately)

M&L plastering in (CM 1:6) 15mm thick finished even and smooth without using extra cement complete all as specified & directed by Engr-in-Charge.

M&L plastering in CM (1:3), 5mm thick finished even and smooth for ceiling complete all as specified & directed by Engr-in-Charge.

Supply only integral water proofing compound of approved make as per ISI.

Preparing surfaces, plastered or unplastered new surfaces, priming plastered and other surfaces with alkali-resistant priming paint and applying two coats of distemper oil emulsion over a coat of wall care putty, white or tinted on walls all as specified

M&L for preparation of new plastered surface of celling and applying two coats of white wash complete all as specified & directed by Engr-in-Charge.

M & L for preparing newly plastered or unplastered surfaces and applying two coats of acrylic based exterior paint (100% acrylic) over a coat of primer & bio wash on walls incl necessary scaffolding complete.

Material and labour for Makrana any colour marble work 18 to 20 mm thick (table rubbed and polished) in floor and set in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble complete.

M&L machine cut Kota stone ( greenish colour, pre mirror polished) slab in one piece as in staircase treads flooring 20 to 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing and polishing with and including 20mm thick screed bed in CM 1:4 complete all as specified.

All as per item No 10.00 above but 18 to 20 mm thick as in skirting .

M&L machine marble Makarana (any colour table rubbed and pre mirror polished) slab in one piece as in staircase treads & riser 20mm thick and set in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble complete.complete all as specified.

Rounding to edges of stone slabs one edge,such as in steps,cooking plateform,and other similar situations

Extra for two No grooves over stair case treads all as directed.

Dismantling floor, hearth, or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises.

M&L non-skid coloured Ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not excceding 0.18 sqm, in floors etc, set and jointed in epoxy mortar and pointed in white of coloured cement to match including 20 mm thick screed bed in CM 1:6 all as specified.

M&L coloured glazed ceramic tiles 300x200x7mm on verticalsurfaces set & jointed in neat cement slurry and pointed in white cement mixed with pigment including Rendering 10mm thick in CM 1:4 backing coat to tiles all as specified.

S&F in repairs vitreous china squatting pan Orissa pattern of size 580 x 440 mm white with back inlet and integral footrest and anti syphonage pipe including 'P' or 'S' trap and provn of lime concrete complete all as specified.

S & F in repairs vitreous china, semi-pedestal pattern ( Anglo- Indian type), white (excluding fixing bolts flushing cistern and flush pipe) including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified

S&F in repair Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminisied hinges devices complete all as specified and directed.

S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand.

S & F 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed.

S & F pillar tap 15mm bore, cast copper alloy fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S&F in repair PVC valveless, syphonic action type, flushing cristern, low level, white, 10 ltr capacity with inlet, ball valve, float and handle including brackets complete all as specified.

S&F High density polyethylene 32 mm dia pipes (LDPE) of pressure rating 6 kgf/cm fixed complete to wall, floors for drain out the waste water in wash hand basin complete all as specified and directed.

S&F High density polyethylene 40 mm dia pipes (HDPE) of pressure rating 6 kgf/cm fixed complete to wall, floors for drain out the waste water in wash hand basin complete all as specified and directed.

Excavation in trenches in hard / dense soil, n. exc. 1.5 m in depth and getting out all as specified.

Demolition and breaking up drain pipe 150/200mm dia (SGSW, AC or RCC) set in cement mortar.

M & L for 150mm internal dia salt glazed stone-ware drain pipe Grade'A' laid in trenches and jointed complete all as specified and directed.

M & L for RCC drain pipes, 200 mm dia conforming to class NP3, laid in trenches and jointed as specified.

Returning , filling in, including spreading , leveling , watering and well ramming in layers n. exc. 25cm in hard / dense soil all as specified.

M&L PCC Type C2 1:3:6 (40mm graded agg) in foundation, plinth & concrete bed to drain pipes including packing all as specified .

Demolition of brick or stone / boulder work built in cement mortar including all quoins, arches, pillars etc .

M&L brick work with subclass B brick straight or curved on plan exc. 6m mean radius , built in cement mortar 1:4 all as specified .

Demolition of plain cement concrete of any description and in any position all as specified

M & L hardcore of gauge n exc. 63 mm, depo-sited, spread and le-velled in layers n exc. 15 cm thick, watered and rammed to a true surface

M&L 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection, path & subbase to floors all as specified and directed.

M&L sand filling under interlocking paver blocks watering and compact complete all as specified & directed .

Dismantling of stone slabs, bedded and pointed in any mortar of any description or thickness in floors, approns etc. including removal of debries out of defence land complete all as specified and directed

M&L for machine pressed precast cocrete interlocking paver blocks 60 mm thick of glossy finish of approved shape & size complete all as specified & directed .

M&L for prepolished coloured chequerd floor tiles of size 300x300x25 mm thick machine pressed set jointed and pointed in neat cement slurry mixed with pigment to match the colour of tiles in floors complete all as specified and directed. Colour, size and pattern shall be approved by GE. (Cement Mortar screed bed shall be measured and paid separately) Note: Make : Duracrete/ Rustica/ Ringlets/ Radio/ Icon or equivalent of Eurocon/ Ultra tiles.

M&L for 20mm thick cement mortar bedding in CM (1:6) for chequred tiles.

M&L for mirror polishing on existing Kota/Marble stone floors fixed in any position of any description all complete as specified and directed.

Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from the frames).

M & L Powder coated aluminium window and ventilators any type, comprising frames, shutters including necessary jointing cleats glazing clips neoprene beading glazing pins/screws etc complete. Note :- (i) glass/wire mesh shall be measured and paid separately. (ii) Item shall be paid as per weight of aluminium sections. However, the rate quoted shall be inclusive of the cost of neoprene beading glazing pin, screws , etc as required which shall not be measured for arriving the weight.

M&L aluminium grill with suitable aluminium anodised frame section manufactured by M/S Deco grill pattern DG-102 (7.5 mm dia and aparture 75mm)

S&F 4 mm thick sheet glass ordinary quality glazing with aluminium and neoprene beads in square exc 0.5 sqm in each pane.

S & F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples

S&F sheet glass 3mm thick ordinary quality fixed with wooden beads & Aluminium neoprane beads including hacking out old broken glass in Sqm n. exc 0.50 Sqm in each panes.

Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each with shutters (without taking off shutters from the frames).

S & F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamvered, put together with glue pinned at joints.

S & F mild steel hold fasts, wall ties and similar small articles conforming to Fe 410-0 or Fe 310-0.

M&L Providing cement concrete type C1 1:3:6 (20mm graded aggregate) for hold fasts complete all as specified.

S&F 35mm thick second class hard wood factory made plain framed panelled shutters (two panes) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board medium density with commercial veneering both face. The size of rail shall be as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated all as specified and directed.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 2omm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of fplain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with sovent cement, suppling & fixing in the frame at site as per specification & direction.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & direction.

S & F 100mm size stainless steel butt hinges (ISI Marked).

S & F extruded aluminium alloy handles 100 mm size, fabricated type, anodised.

S & F 100mm long aluminium anodised barrel tower bolt all as specified and as directed by Engineer-In-Charge.

S&F Aluminium alloy, anodised, sliding door bolt 300mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alumimnium alloy and fixed.

S & F in repairs Aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm, cut to required size and fixed to doors,windows shutter, with wooden beading (any size) with aluminium wire staples and removing old beading, complete all as specified and directed.

Taking down aluminium windows/vent & refixed in repairs with proper seal adhesive after easing, tighten & proper fixing of loose fittings i.e. Screws, handles, hinges, T/bolt etc all as specified and directed.

M&L applying one coat of white wash on old plastered wall surfaces including preparation of surfaces all as specified.

All as per item No 63.00 above but on ceiling.

M&L applying one coat of oil bound emulsion distemper on old decorated surfaces including preparation of surface with white cement complete all as specified.

M&L preparation of old decorated surfaces of wall including washing and applying two coat of Acrylic emulsion paint exterior grade (100% Acrylic) with one coat of primer incl necessary scaffolding, Safety net etc all complete as directed by Engr-in-Charge.

M&L for Preparation of old painted surfaces of wood or wood based materials of any description not other wise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed by EIC.

M&L preparation of old painted surfaces over 10cm width or girth and applying two coat of synthetic enamel paint on steel surfaces all as specified and directed.

M&L cleaning the existing surfaces of chequered tiles/paver blocks and applying two coats of floor guard paint over a coat of primer

M&L for preparation of Black bituminous road surface and applying thermo plastic road marking paint of white/yellow colour strips of width 125mm, minimum 1.5 to 2 mm thick with applicator machine and heated mixer with stirring mechanism at temprature 160 degree C, laid uniformly with width as directed, paint confirming to BS-3362 Part I and II of 1989 etc, complete all as per manufacturer instructions and as directed by Engr-in-Charge. Make:Shivalik/CMS Ltd/Automat Road/Safety Ltd/Hotherm plast Engg.

M&L for preparation of new wooden surface over 10cm width or girth applying one coat of zinc chrome primer and two coats of synthetic enamel paint

Removal of debries outside of MD land exc. 5 Km but n.exc. 10km.

ASHOK CONSTRUCTION

sri ram construction

Unitech Enterprises

I.J Enterprises