Construction of Girls Hostel Building (50 Bedded) under TAD AT Manoharthana Distt. - JHALAWAR

Amount

SOFA 2 Seater

SEAT FOAM‎: ‎The seat is made of PU ‎foam with Density ‎28‎± ‎2 ‎kg‎/‎cu‎.‎mtr having an ‎additional top layer of super soft ‎PU foam in Density ‎32 ‎± ‎2 ‎kg‎/‎cu‎. ‎upholstered with fabric ‎or leatherette‎. ‎BACK ‎FOAM‎: ‎The back is ‎made of PU foam with ‎Density ‎28 ‎± ‎2 ‎kg‎/‎cu‎. mtr with two additional ‎top layer of supersoft ‎ foam of density ‎32‎±‎2 ‎kg‎/‎cu‎. ‎mtr‎, ‎upholstered ‎ with fabric or leatherette .UNDERSTRUCTRE ‎: ‎Understructure is made ‎up of ‎1‎.‎2‎±‎0‎.‎1 ‎cm‎. ‎thick ‎hot pressed plywood ‎( moisture resistance & termite proof as per IS: 303) & pinewood of cross section devoid of major knots & surface defects 6 nos. per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose 6 nos. per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. LEG ASSEMBLY‎: ‎It is ‎a welded assembly ‎made in Stainless steel ‎(‎grade SS ‎202‎) ‎tube ‎& ‎plate‎ with plastic endcap. (W) 146.0* (D) 90.5(H) 85.5 cm seat (H) 45.0 cm

SOFA 3 Seater

SEAT FOAM‎: ‎The seat is made of PU ‎foam with Density ‎28‎± ‎2 ‎kg‎/‎cu‎.‎mtr having an ‎additional top layer of super soft ‎PU foam in Density ‎32 ‎± ‎2 ‎kg‎/‎cu‎. ‎upholstered with fabric ‎or leatherette‎. ‎BACK ‎FOAM‎: ‎The back is ‎made of PU foam with ‎Density ‎28 ‎± ‎2 ‎kg‎/‎cu‎. mtr with two additional ‎top layer of supersoft ‎ foam of density ‎32‎±‎2 ‎kg‎/‎cu‎. ‎mtr‎, ‎upholstered ‎ with fabric or leatherette .UNDERSTRUCTRE ‎: ‎Understructure is made ‎up of ‎1‎.‎2‎±‎0‎.‎1 ‎cm‎. ‎thick ‎hot pressed plywood ‎( moisture resistance & termite proof as per IS: 303) & pinewood of cross section devoid of major knots & surface defects 6 nos. per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose 6 nos. per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. LEG ASSEMBLY‎: ‎It is ‎a welded assembly ‎made in Stainless steel ‎(‎grade SS ‎202‎) ‎tube ‎& ‎plate‎ with plastic endcap. (W) 206.0* (D) 90.5(H) 85.5 cm seat (H) 45.0 cm

OFFICE WORK TABLE

Enterprise 1500 Table with CPU Hanger size shall be 1500 Width mm x 750 Depth mm x 728 Height mm . Top shall be 18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat( epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish powder coat (epoxy polyster) .

Coffee Table Glass Top

Overall Size : Width : 100cm Depth : 65cm Height : 43cmTABLE MATERIALS: Glass of 08 mm thk tempered, Solid rubber woood legs and frame, MS sheet as bottom shelf .DECORATION MATERIALS & SPECIFICATIONS: (DENSITY / TYPE): PU coating to the rubber wood parts, clear glas

Almirah Plain

Storwel plain shall have an overall size of 916mm(W) x486mm(D)x1980mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The Storwel Plain should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available.

Single Bed w/o storage

Overall Size :Length - 2060.0 mmWidth - 1131.0 ram Height - 945.0 mm Material:Bed Structure consist of metal frames made of M.S. Channels in 1.0 mm Thickness.Horizontal plinths and bottom plinth are made of 25 mm Thick Prelaminated Particle Board.Head board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it.Tail board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it.Side rail is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed on to it.Mattress panels of Bed are made of 18 mm thick Prelaminated Particle Board with all the exposed edges are edge banded with 0.8 mm thick PVC edge banding. Construction :Knock Down construction.Packets : 1 Bed in 1 packets. Finish :18 mm thick Prelaminated Particle Board is in Walnut shade. Metal frames are powder coated in shade Mat Black to the thickness of 50 microns(+-10).

Bedside Table

Overall Size : Depth - 450.0 mm Width - 440.0 mm Height - 510.0 mm Material : Body and drawer panels of Bed side table are made of 18 mm thick Prelaminated Particle Board. All the exposed edges are edge banded with 0.8 mm thick PVC edge banding. Side panels are made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trim fixed on to it. Hardware : The high quality hardware used like Roller slides, Hinges , minifix, dowels is of make Hettich.. Construction : Knock Down construction.Packets : 1 packet. Finish :. 18 mm thick Prelaminated Particle Board is in Walnut shade.

CHAIR MID BACK REVOLVING

SEAT/BACK A SSEMBLY: The seat is made up of 1.2 + 0.1cm thk. hot pressed plywood measured as per QA method described in OCP-QLTA-PL14-18.The Back is made up of injection mou1ded glass filled nylon & upholstered using Mesh fabric with high tenacity yarn. * SEAT SIZE(Larger Seat Depth) : 47.0 cm. (W) x 51.5 cm (D) * BACK SIZE : 45.0 cm. (W) x 65.3 cm. (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45+/-2 kg/m° and hardness 16 + 2 kgf as per IS:7888 for 25% compression. ARMRESTS : The adjustable armrest is designed with the following features : • Up-Down adjustment— 8 steps (8 0+0.Scm range) • Height adjustable armrest structure which is Powder Coated & fitted with an armrest top. • Fixed Armrest Top is PU moulded over metal insert. LUMBAR SUPPORT ASSEMBLY: The Lumbar support consists of polypropylene pad with moulded polyurethane foam & covered with polyester fabric.The Height of Lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pad. Lumbar pad has an adjustment of 8.0 + 0.5 cm in height. FRONT PIVOT SYNCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features. • 360° revolving type. • Single point control. • Front-pivot for tilt with feet resting on ground ensuring more comfort. » Tilt tension adjustment. • 4-position locking with anti-shock feature. • Seat/back tilting ratio of 1:2. PNEUMATIC HEiGHT ADJUSTMENT. The pneumatic height adjustment has an adjustment stroke oi 10.0 + 0.3 cn°. Pedestal Assembly : the pedestal is injection moulded in black 30% glass filled nylon and fitted with 5 nos. twin wheel castors. H=The pedestal pitch center dia is 66.1+0.5 cm TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in black Nylon. NECXREST :

The Neckrest assembly consist of polypropylene pad with moulded polyurethane foam & covered with Polyester fabric. Neckrest is fixed to Back Assembly through Neckrest connector. Neckrest assembly has Weight adjustment of 4.2 + 0.5 cm and rotation adjustment of oyerat! 76°+- 2°. The complete neckrest assembly is retro fit to the main chair.

Study table 3 feet wide

Table 3 Feet Wide size shall be 900 Width mm x 600 Depth mm x 745 Height mm . The top shall have desk panel made from 25 mm thick pre-laminated boards with PVC edge banding on all sides . Understructure shall be made of 50.8 mm x 25.4 mm x 1.25 mm thick powder coated ERW tubes at base which are welded to the vertical channels shall be made of 0.6 mm thick powder coated MS ' C ' sections . Footrest and Modesty panels provided for stability . Fabric life and OHSU too can be offered so is the drawer unit either with hinged door or with box filling drawers . The tubes shall be closed with plastic caps . Level adjustors are provided to take care of unevenness in floor .

Visitor Chair With Arms

SEAT/BACK ASSEMBLY: The seat made from 1.2 ±0.1cm. thk. hot pressed plywood measured as per QA and back should be injection moulded from black Co-polymer Polypropylene upholstered with fabric and moulded Polyurethane foam together with seat and back covers. The back foam should be designed with contoured lumbar support for extra comfort. SEAT SIZE: 45.0cm(W) x 42.0cm.(D) BACK SIZE: 39.0cm(W) x 38.0cm.(H) SEAT I BACK COVERS: The seat and back covers should be injection moulded in black Co-polymer Polypropylene. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density = 45 +/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. ARMREST ASSEMBLY (FOR 7044T): The armrests should be made of black integral skin Polyurethane wtih 50-70 Shore 'A' Hardness and reinforced with M.S. insert. The P.U. armrests should be then fixed to black powder-coated ( OFT 40-60 microns ) armrest brackets made of of 0.5 ± 0.05 cm. thk. HR steel and fitted with claddings made of injection moulded Polypropylene. FIXED TYPE mechanism: The fixed type mechanism should be without back tilt. TUBULAR FRAME: The tubular frame should be made up of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. E.R.W. tube and black powder coated ( DFT 40-60 microns Overall Dimensions of Chair Seat Height -49.5cm. Height -88.5cm. Width & Depth of Chair as measured from pedestal - Width-56.0 cm and Depth-54.0 cm.

DINING TABLE -6 Seater PU Coated

Time Out 6 Seater PU Coated size shall be 1734 Width mm x 1175 Depth mm x 750 Height mm . Top shall be 25 mm thick base material shall be 25 mm MDF board . On top PU painting of minimum 2H hardness with 75% glass as per color chart .Combination color graphics on the centre . Brown Laminate on bottom specially profiled edges for comfort . The Understructure shall be having bend pipe structure of MS powder coated . Pipe dia 38 mm , 2 mm thick and it shall be fitted with top by SS machine screws . Legs shall be of MS powder coated and 38 mm dia. pipe legs are fixed with inderstructure and table top . Glide shall be of Plastic fixed at the understructure to prevent the damage of table top during stacking .

Café Chair -MS

The seat and back are made uo injection moulded high impact strenght polypropylene polymer compound with indoor graade UV Resistance. The Powder coated (DFT50+ microns) weled tubular frame is made from 2.22 + 0.03 cm x 0.16+/- 0.0128cm and 3.5+/- 0.03 cmx1.5+/-0.03 cm x 0.16 +/- 0.0128 cm M.S.E.R.W tubThe Shoes are made of high impact strenght polypropylene polymer compond with indoor grad UV Resistance and pressed fitted with tubularfram. SIZE : (W)52.5cm*(D)55.8cm*(H)84.5cm*(seat H) 45.0 cm Back Size 51.6 cm(W)*40.5 cm (H)

SINGLE BED WITH PLY

Overall Size:Width - 2050.0 mm Depth - 973.0 mm Height - 720.0 mm Material:Headboard panels are made of 18 mm thick Prelaminated Particle Board.All the exposed edges are edge banded with 2 mm thick PVC edge banding. Bed leg frame structure consist of metal frames made of M.S. 50 x 25 mm box section in 1.2 thickness Internal Pipes made of 19 x 19 mm box section in 0.9 mm thickness. Headboard pipes are made of 25 x 25 mm box section in 0.9 mm thickness. Mattress holding bkt is made of 0.6 mm CRCA SHEET . Hardware :The high quality hardware used .Construction:Knock Down construction. ackets:1 packet. Finish: 18 mm thick Prelaminated Particle Board is in 4501.Bed leg frame structure are powder coated in shade : MATT TAUPE WHITE. REF NO. 9001904 to thickness of 50 microns (+-10). Rest all metals are powder coated in shade : S/G CHARBROWN.REF NO. 9000605 to thickness of 50 microns (+-10).

PUBLIC SEATING CHAIR 3 SEATER

The seat shell should be a welded assembly of seat,back and side frame. The seat and back should be made of 0.12±0.013cm thk CR steel sheet with oblong perforations.They should be welded to sideframe of size 3.2±0.05cm x 0.5 ± 0.05 cm thk HR steel.The welded assembly should be powder coated ( DFT 40-60 microns ). The seat has a front water fall edge to provide popliteal clearance for comfortable seating. It also has a buttock support curve that not only provides rear support but also prevents small children from falling through the gap between seat and back. Clean and flat surfaces of seat and back aids in easy maintenance. * SEAT SIZE : 47.8 cm (W) x 44.6 cm (D) * BACK SIZE : 41.6 cm (W) x 23.0 cm (H) Understructure assembly consshould be ts of connecting beam and leg assembly made of M.S. E.R.W. oblong tube of size 7.5±0.03cm x 2.5±0.03cm x 0.2±0.016cm thk.The welded structure assembly should be powder coated ( DFT 40-60 microns ).The leg assembly should be fitted with shoes and levellers in Nylon. The leg structure should be designed with minimal should be a of contact close to ground providing easy access for cleaning purposes. The shoes fitted to leg assembly help in aligning the structure for back to back arrangements. Levellers take cshould be of uneven flooring.Connecting beam should be fitted with snap locking end cap.lt also aids in side-by-side understructure alignment . Armrest assembly consshould be ts of armrest frame and armrest pad . The armrest frame should be made up of size 3.175±0.05cm x 0.47±0.027cm thk HR steel and it should be powder coated ( DFT 40-60 microns ). Armrest pad should be injection molded in Nylon and should be fitted onto the armrest frame. Overall Dimensions of Chair Seat Height - 44.1 cm. Height - 78.5 cm. Width & Depth of Chair as - Width-169.5cm and Depth-63.8 cm.

MATTRESS 78X 36X 4 INCH

Thickness: 10 cm This dual sided mattress has superior bonded foam base for a better back support. The fabric used in it is tear resistant yet breathable and has foam quilting.

MATTRESS 78X 72X 4 INCH

Thickness: 10 cm This dual sided mattress has superior bonded foam base for a better back support. The fabric used in it is tear resistant yet breathable and has foam quilting.

Bidder Name

Amount

M/s SHRI SAI CONSTRUCTION CO.(GSTN-09AKRPJ6617PIZA)

M/s Surendra Kumar Gupta(GSTN-08ABIPG6510A1Z8)

Anil and Company(GSTN-08AAEFA2103L1ZT)

Anil and Company

M/s Surendra Kumar Gupta

Anil and Company

M/s Surendra Kumar Gupta