Park Construction work in ward no 05 Under Nagar Parishad Bakhri,

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth upto 50 m and lift upto 1.5 m, disposed soil to be levelled and neatly dressed :

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared.

Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in :

Cement mortar 1:6 (1 cement : 6 coarse sand)

Extra tor Brick work in superstructure above plinth level upto floor V cum

. Half brick masonry with non modular fly ash bricks of class designation 10, conforming IS :12894, in superstructure above plinth and upto floor V level.

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.

Cement plaster in course sand

15 mm cement plaster on the rough side of single or half brick wall of mix :

6 mm cement plaster to ceiling of mix :

Providing and Applying plaster of Paris putty of 2mm thickness over Plastered surface to prepare the surface even and smooth complete

Providing and applying white cement based putty of avg. thickness 1mm avg. of approved brand and manufacturer e.g. J.k., Birla putty etc. or any equivalent over the plastered wall surface to prepare the surface even and smooth complete

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.

On steel work

Finishing walls with water proofing cement paint of required shade :

Finishing walls with textured exterior paint of required shade :

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.

Two coats

Wall painting with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound ) content less than 50 grams/ litre. of Approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

Two coats.

Providing & fixing Chicken wire mesh on joints of RCC & Brick work before plastering complete in the direction of Engineer-in charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and fixing precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc., including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required centering complete.

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement:3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top

Centering and shuttering including strutting, propping etc. and removal of form for :

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Suspended floors, roofs,Mountain, landings, balconies and access platform

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete .

kilogra m

TMT 8mm dia

TMT 10mm dia

TMT 12 mm dia

TMT 16mm dia

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer- in-charge.

All works above plinth level upto floor V level

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.

Glazed Vitrified tiles Matt/ Antiskid finish of size

Providing and fixing Glass mossaic tiles at finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge.

Providing and laying matt finished vitrified tile of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer- in-Charge.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).

Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).

Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters :

Providing & Fixing 1 mm thick decorative high pressure laminated sheet

Extra for providing lipping

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain type flush door shutter

P&F uPVC window

Two track two panels sliding window made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)

With glass panes of 5.50 mm thickness(weight not less thar 13.75 kg/sqm)

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and laying water proofing treatment in sunken portion of Ponds & Fountain etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and manur befor an after floodin trenc with water (excluding cost of imported earth, sludge or manure).

Supplying and stacking at site dump manure from approved source,including carriage up to 1 km (manure measured in stacks will be reduced by 8% for payment) :

Fine dressing of the ground

Spreading of sludge, dump manure and / or good earth in required thickness as per direction of Officer-in-charge (Cost of sludge, dump manure and / or good earth to be paid separately).

Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge..

Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately).

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) :

Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge.;

Providing Square Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 60 mm nominal size), reinforced with 7 nos. ( 3 nos horizontal & 4 nos vertical "U" shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height , all complete as per direction of Officer-in- charge.

Providing and fixing M.S. flat iron tree guard 60 cm dia and 2 m high,above ground consisting 4 nos 25 x 6 mm, 2.25 m long and 8 nos 25 x 3 mm 2 m long verticals M.S. flats, riveted to 3 nos 25 x 6 mm M.S. flat iron rings in two halves, fixing together at site with required six numbers of 8 mm dia. and 30 mm long bolts, including painting two coats with synthetic enamel paint of approved brand and manufacture over a coat of primer. One name plate of 1 mm thick M.S. sheet of size 250x100 mm shall be welded to the tree guard near the middle height and lettered CPWD / PWD/ any other approved name. The tree guard shall be suitably fixed to the ground by embedding four legs of tree guard in pits of suitable dia and to a depth of 25 cm, refilling the pits with soil and ramming, complete in all respect as per satisfaction and direction of Officer-in-charge.

Half brick circular tree guard in bricks, internal diameter 1.25 metre and height 1.2 metre above ground and 0.20 m below ground, bottom two courses laid dry and top three courses in cement mortar 1:6 (1 cement : 6 fine sand) and the intermediate courses being in dry honey comb masonry as per design complete :

With common burnt clay F.P.S. (non modular) bricks of class designation 5

Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 nos ( 3 nos horizontal & 4 nos vertical "U" shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officer-in- charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

Providing and fixing ball valve (brass) of approved quality, High or low pressure Complete

Providing & fixing stone slab table rubbed, edges rounded and polished of size 75 X 50cm deep and 1.8 cm thick fixed in urinal patitions by cutting chase of appropriate width with chase cutter and embedding the stone in chase with epoxy grout or with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregste 6mm nominal size) as per Engineer-in-charge and finished smooth

Providing and fixing white vitreous china extended wall mounted water closet of size 780x370x690 mm of approved shape including providing and fixing vitreous china cistern with duel flush fitting, of flushing capacity 3 litre/6litre (adjustable to 4litre/8litre, including seat cover, and cistern fitting, nuts, boltsand gasket etc complete.

Providing and fixing water closet squatting pan (Indian type WC pan) with 100mm sand cast Iron P or S Trap, 10 litre low level white PVC flushing cistern with manually controlled device (handel lever), conforming to IS 7231, with all fittings & fixtures complete including cutting and making good the walls and floors wherever required.

White vitreous china Orissa pattern WC pan of size 580 x 440mm with intergal type foot rests.

Providing and fixing white vitreous china pedestal type water closet (European type

W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.

10 litre capacity-White

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :

White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap

White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap

Providing and fixing PTMT Bottle Trap for Wash basin and sink.

Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms.

Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colours weighing not less than 105 gms

Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colours weighing not less than 80 gms

Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.

Providing and fixing C.P. brass angle valve approved quality conforming to IS 8931..

Providing and fixing PTMT angle stop cock 15 mm nominal bore,weighing not less than 85 gms

Providing and fixing CP brass single lever wash basin mixer with pop up waste complete including cutting and making good the walls where required.

Excavating trenches of required width for pipe, cables etc including excavation for sockets ,& dressing of sides ,ramming of bottoms ,depth upto 1.5m including getting out the excavated soil,& then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming ,watering, etc and disposing of surplus excavated soil as directed, within lead of 50m.

Constructing masonry Chamber 120x120x100 cm, inside with 75 class designation brick work in cement mortar 1:4( cement :4 coarse) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10(1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design :

Providing laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.

Providing and fixing square mouth SW gully trap grade ‘A’ complete CI grating brick masonry chamber with bricks of class designation 75 and water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 13.00 kg and frame to be not less than 5 kg. as per standard design. (COVER MIN. 4.5 KG & FRAME MIN.2.7 KG )

Providing and laying non-pressure NP2 class (light duty) RCC pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete.

Construction brick masonry manhole in cement mortar 1:4 (1cement : 4coarse sand) RCC top slab with 1:2:4 mix 9 with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand 4 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design.

19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

No of Harvesting Pits = 3nos.

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level.

metre

metre

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (RMS) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.

metre

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in- charge.

Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge.

Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer- in-charge.

Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000x450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in- charge.

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/ plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge.

150 mm nominal size dia having minimum wall thickness 5.00 mm.

Supply & Installation of submersible pump of K.S.B/ CALAMA. or eqt. make including cost of labour, T&P and material required for completion of work. 1.5 HP outlet 40mm dia. or more, Head 71/36, Discharge 2000/6000 LPH

Supply & installation of electrical control panel of L&T / Havells or equivalent make for submersible pump / pumpset containing contractor relay condenser for 1.5 HP pump set single phase

Supply and fixing of submersible cable Havels or equivalent make, for submersible pump complete in all respect 2.5 mm2 for pump above 1 HP and up to 3 HP

Supply & fixing of steel wire rope for submersible pump including cost of labour, T&P and material required for completion of work.

Providing and fixing(including all the fixtures accessories complete) Kids play equipmentsas per the specification and direction of engineer in charge: Multiple Slide System (Size: L40’XW40’XHT 12.5’) (feet)

Providing and fixing(including all the fixtures accessories complete) Kids play equipments as per the specification and direction of engineer in charge: Multiple Slide System (Size:L25’XW18’XHT 12’)

Providing and fixing(including all the fixtures accessories complete) Kids play equipments as per the specification and direction of engineer in charge: Roller Slides

Providing and fixing(including all the fixtures accessories complete) Kids play equipments as per the specification and direction of engineer in charge:Swings

Providing and fixing (including all the fixtures accessories complete)Kids play equipments as per the specification and direction of engineer in charge:Family Swing

Providing and fixing (including all the fixtures accessories complete)Kids play equipments as per the specification and direction of engineer incharge: Merry go round

Providing and fixing(including all the fixtures accessories complete) Kids play equipments as per the specification and direction of engineer in charge: Climber

Providing and fixing (including all the fixtures accessories complete) Kids play equipments as per the specification and direction of engineer in charge: Burma Bridge

Providing and fixing (including all the fixtures accessories complete)Kids play equipmentsas per the specification and direction of engineer in charge: See- Saw (1 normal see saw, 1 spring see saw)

Providing and fixing (including all the fixtures accessories complete)Kids play equipmentsas per the specification and direction of engineer in charge: Garden Benches(FRP Material)

Providing and fixing (including all the fixtures accessories complete)Kids play equipments as as per the specification and direction of engineer in charge: Cast Iron Benches

MCB: Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.:100 A, 4 pole isolator

Supplying and fixing following rating, Four pole, (Three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.: 63A, 4 pole RCCB

Cable :Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sandcushioning,protective covering and refilling the trench etc as required. (3 1/2x 25 Sq.mm Armoled AluminiumCable)

Cable: Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning,protective covering and refilling the trench etc as required. (4 x 10 Sq.mm Armoled Aluminium Cable)

Supplying and making Termination with brass comperation with gland and aluminium lugs for following size PVC insulated and PVC sheathed/ XPEL aluminium conductor cable of 1.1kv gread:31/2 x 25 Sq. mm.

Supplying and making Termination with brass comperation with gland and aluminium lugs for following size PVC insulated and PVC sheathed/ XPEL aluminium conductor cable of 1.1kv gread:4 x 10 Sq. mm.

Earthing: Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (But with charcoal/coke and salt)as required

Feeder Panel: Supplying and fixing horizontal type feeder panels in gledoor three pole and neutral,sheet steel, MCB distribution board 415volts, on surface/ mounted, complete with tinned copper bus bar, neutral bus bar,eart bar, din bar , interconnections, powder painted including earthing,includingtimer,contactorconnections, etc.) Auto On, Auto Off & Auto)

Lights fixture:High galvanized mast light suitable for 6 to 9 lantern symmetrically fitted along with their control gear and having two point suspension systems with stainless steel wire rope of 6mm dia 97/19 gauge and double drum winch with luminaire mounting arm, pulley assembly, and aviation obstruction light, lightning arrester spikeincluding RCC foundation as per height. (including 8 Nos 400 watt LED lights) (15 metre height of high mast) (directions of lights shall be adjusted to single or multi directions per requirement of children and site conditions with earthing plates and other necessary accessories for high mast)

Lights fixture:Providing & erecting 4 m high (clear height) galvanised octagonal decorative pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OHPL/OPL (INCLUDING LED light fititng of 20-24 Watt)

Lights fixture:Supplying and erecting cylindrical shaped integral decorative with high power12W-16W LED bollard upto 1000mm with opal acrylic diffuser and IP65 protection on provided foundation complete.

BORING OF 3 NO. TUBEWELL

Metre

Electrical Pumps Panel

Alstonia Scholaris 'Milky pine' (1500-1800mm high)

Hibiscus Mutabilis-Chaneable Rose'confederate Rose'

Grevillea Robusta 'Silky Oak'

Bombax Ceiba ' Silky-Cotton Tree'

Furcraea gigantea ' mauritius hemp'

Michelia Champaca 'Golden Champa'

Melia azedarach ' Chinaberry'

Albizia Procera

Couroupita Guianensis

Kagelia Pinnata

Calliandra Haematocephala ' White Powderpuff'

Rhapis Excelsa ' Broadleaf Lady Palm Or Bamboo Palm'

Gardenia Jasminoides ' Cape-jasmine'

Russelia Equisetiformis 'Fire Cracker plant'

Ixora Chinensis 'dwarf Rangan'

Putranjiva Roxburghii 'Lucky Bean Tree'

Wedelia Trilobata 'Yellow Dot'

Iresine Herbstii ' Blood Leaf Plant'

Cynodon dactylon ' Calcutta Grass'

paspalum Vaginatum 'paspalum Grass'

Jasminum pubescenes 'rubescens'

Board

Design and drawing including vetting@ .7%