Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹2.7 LAdmitted-Finance 142 HAHIHARPUR KENSHILI USTHI SOUTH 24 PARGANAS WEST BENGAL 743375 | 24 PARAGANAS SOUTH | WEST BENGAL | 743375 | L1 | Admitted-Finance | ||
| 2 | L2₹2.7 L+₹3,993.60 (1.50%)Admitted-Finance 34E SUREN SARKAR ROAD KOLKATA KOLKATA WB 700010 | KOLKATA | WEST BENGAL | 700010 | L2 | Admitted-Finance | ||
| 3 | L3₹2.7 L+₹6,405.84 (2.40%)Admitted-Finance 418 KALITALA PARK KOLKATA KOLKATA KOLKATA 700070 | 24 PARAGANAS SOUTH | WEST BENGAL | 700070 | L3 | Admitted-Finance |
Tender Value
₹2.7 L
EMD Value
₹6,000
Closing Date
24 Sept 2026, 2:00 pmClosed
DyCE_WS-II
5 S N Banerjee Road, Kol-13
REPAIRING, FITTING AND FIXING OF 02 NOS. DAMAGED 450 MM DIA BUTTERFLY VALVE WITH ACTUATOR FOR HT PUMP DELIVERY LINE AT SENPALLY BPS.
2026_KMC_1042214_1
WS/SPBPS/2026-27/10
Open Tender
MECHANICAL
Percentage
25 days
Kalighat BPS
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹6,000
9 Oct 2026
15 Sept 2026
26 Sept 2026
15 Sept 2026
24 Sept 2026
15 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | CHAPTER - II LAYING & JOINTING PIPES, SPECIALS ETC.2.1 C.I. / D.I. Pipe & Specials 2.1 C.I. / D.I. Pipe & Specials 2.3.8 Supplying and fabricating 20 mm to 32mm thick (finished thickness) M.S.Blank Flange properly ribbed, one face machined including drilling holes as per standard table, fitting and fixing the same with M.S. flanged pipe with supply of nuts, bolts, washers, gasket etc. of best quality all complete as per specification and direction of the Engineer-in-charge.450mm dia. | 2 | EA | 6,892 | ₹13,784 |
| 2 | CHAPTER - VII MISCELLANEOUS ITEMS Dewatering by pumps including all leads, lifts and making all arrangements of disposal. where continuous flow of water from a source other than natural or ground water is encountered in case of emergency maintenance works related to leakage. breakage and making wet connections. [Note ;- In case of any other situation demanding such emergency dewatering. use of this item is to be approved by the Superintending Engineer/Tender Accepting Authority. This item shall be executed on the specific direction duly supported by proper clarification of the E.I.C. who will be satisfied in absolute discretion that such work has not been necessitated due to any natural source of water or any fault of the Contractor] | 864 | HPH | 33 | ₹28,512 |
| 3 | CHAPTER - II LAYING & JOINTING PIPES, SPECIALS ETC.2.1 C.I. / D.I. Pipe & Specials 2.1 C.I. / D.I. Pipe & Specials 2.4Valves 2.4.1 Lowering, fitting and fixing of all types of valves in proper position and alignment using chain pully block or crane(for diameter above 250 mm) by providing temporary support,as required,gaskets,nuts& bolts etc.all cornplete as per specification and direction of the Engineer-in-Charge.[The rate Includes cost of flange joints]450mm dia. | 2 | EA | 4,601 | ₹9,202 |
| 4 | BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS, GATES ETC. B. REPAIRING 2. Welding in M.S. structural work with gas or electric: (b) Continuous weld. | 3,393.36 | PCM | 9 | ₹30,540.24 |
| 5 | CHAPTER - II LAYING & JOINTING PIPES, SPECIALS ETC.2.1 C.I. / D.I. Pipe & Specials 2.1 C.I. / D.I. Pipe & Specials 2.1.6 Flange joint to C.l./D.l/MS. pipes and specials including supply of rubber gasket. nuts. bolts. washers etc. of best quality to make the joint watertight at required hydraulic pressure all complete as per specification & direction of the Engineer-in-Charge. Diameter in mm 450mm dia. | 2 | EA | 2,122 | ₹4,244 |
| 6 | CHAPTER - II LAYING & JOINTING PIPES, SPECIALS ETC.2.1 C.I. / D.I. Pipe & Specials 2.1 C.I. / D.I. Pipe & Specials 2.3 M.S. Pipes 2.3.1 Gas cutting of M.S. pipes and/or M.S. plates of different thickness all complete as per specification and direction of the Engineer-in- Charge. Thikness in mm 5mm to 8mm thick plate | 8.48 | MTR | 213 | ₹1,806.96 |
| 7 | S&F WORM SHAFT AFTER REPLACING THE OLD DEFECTIVE ONE. ALL MATERIAL SHOULD BE AS PER THE EXISTING ONE I.E. AS PER SAMPLE | 2 | EA | 14,040 | ₹28,080 |
| 8 | MANUFACTURING & SUPPLY AS PER SAMPLE OF WORM GEAR OF PHOSPHOR BRONZE FOR ACTUATOR. | 2 | EA | 2,034 | ₹4,068 |
| 9 | MANUFACTURING & SUPPLY AS PER SAMPLE OF ACTUATOR COMPONENTS EN-24 STEEL MAIN DRIVING SHAFT (INCLUDING FITTING, FIXING). | 2 | EA | 2,652 | ₹5,304 |
| 10 | SUPPLY & FIXING OIL SEAL FOR ACTUATOR AFTER REMOVING THE OLDER ONE & NECESSARY CLEANING AS PER DIRECTION OF EIC. AS PER SAMPLE | 2 | EA | 1,146 | ₹2,292 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.03 MB
TD.pdf
Tender Documents • 0.47 MB
BOQ_2558234.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .