Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.4 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹29.6 L+₹6,454 (0.22%)Rejected-AOC | L2 | Rejected-AOC Rejected | |
| 3 | L3₹29.7 L+₹15,175 (0.51%)Rejected-AOC | L3 | Rejected-AOC Rejected | |
| 4 | L4₹33.9 L+₹4.4 L (15.0%)Rejected-AOC | L4 | Rejected-AOC Rejected | |
| 5 | L5₹35.0 L+₹5.5 L (18.6%)Rejected-AOC | L5 | Rejected-AOC Rejected |
Tender Value
₹35.8 L
EMD Value
₹72,000
Closing Date
16 Sept 2022, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER GOMANATAK
GARRISON ENGINEER GOMANTAK VASCO DA GAMA PIN 403802
Addition Alteration to Bldg No P-20 at INS Gomantak under GE Gomantak Vasco
2022_MES_547768_1
8464/E8
Open Tender
Support/Maintenance Service
Item Rate
180 days
VASCO DA GAMA
Refer tender documents
8 documents required · 8 mandatory
₹500
GE GOMANTAK
₹72,000
11 Oct 2022
26 Aug 2022
17 Sept 2022
26 Aug 2022
16 Sept 2022
10 Sept 2022
60 days
Amount
Dismantling floor, hearth or wall tiling also in patches including cement mortar bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified.
M&L joint free Non Skid ceramic plain coloured tiles (also in patches ) 7 to 8mm thick ( square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screeding in CM 1:4 complete all as specified.
M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screeding in CM 1:6 complete all as specified.
M&L glazed ceramic coloured tiles 350x250x 6 to7 mm thick/450x350x6 to7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick backing coat in cement mortar 1:3 complete all as specified and directed.
M&L for Virified Ceramic tiles 10 mmthick (square/ rectangular) polished, area of each tilesnot exceeding 0.36 sqm, in floors etc. set and jointed inneat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6
M&L for providing and laying 10mm thick of size 500x500mm gym flooring sheets including removal of old rubber type flooring material of any thickness and type and removing outside MoD land all as directed and approved by GE.
Demolition of un-reinforced cement concrete in ground floors and pavings not exc.15 cm thickness. (Below or above ground level).
M&L for 40mm thick flooring sub base Cement concrete type B-1, 1:2:4 (20mm graded aggregate)
M & L 10 mm thick rendering in CM 1:3 as backing coat to receive granite/marble stone as in cills and similar works.
M & L Granite (of any type) 20mm work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed .
Dismantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) orinsulation boards/slabs/blankets, any thickness, including cover fillets
S&F for modular kitchen cabinets with 18mm thick acrylic glass look laminated boards including drawers,plate racks,openable cupboards fitted with good quality fitting like handles autoclose hinges,channels etc complete as per site requirement and all as directed by Engr in charge and as approved by GE.
S&F in repairs for sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size139 x 50cm :Make Jaguar all as per directed
Taking up or down 20 mm dia steel tubing and connection including cleaning for re-fixing or removal from site complete all as specified and directed
Supplying and laying of 20 mm dia. CPVC pipes SDR 11 & Plain CPVC SDR 11with all fittings on walls/ceiling or laying in floors complete all as specified.
Taking down cement plaster on brick or stone wall etc., including racking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
Material & Labour for rendering in CM 1 : 4 (10+5)=15mm thickness on brick/cement/stone surfaces and finishes the surface even and smooth with out using extra cement including mixing with liquid WPC on top 5mm thick only Note :- Water proofing compound will be paid separately all as specified and directed.
Suppy only liquid water proofing (Compound) (Make:Dr fixit / Sika / Fosroc)
Material and labour for rendering 10 mm thick on brick or concrete surfaces in CM 1:6 finished even and fair with out using extra cement.
M & L for applying two coat of acrylic emulsion exterior paint (anti fungal paint) on new plastered surfaces walls/ ceiling and corniers incl preparation of surfaces by brooming down or steel wire brushing scrappingdown with steel scrapper smoke soot moulds moss and efflorescent slats brading oil and greasy spots etc and making proper surface by applying ready mix preparatory putty wherever required complete all as manufactorers instructions. (Manufactured by : Asian paint (Apex Ultima)
M & L for complete removal of existing treatment and applying two coat of acrylic emulsion exterior paint (anti fungal paint) on old plastered surfaces walls and corniers incl preparation of surfaces by brooming down or steel wire brushing scrappingdown with steel scrapper smoke soot moulds moss and efflorescent slats brading oil and greasy spots etc and making proper surface by applying ready mix preparatory putty wherever required complete all as manufactorers instructions. (Manufactured by : Asian paint (Apex Ultima )
M&L for 3mm thick Birla white wall care putty on wall including preparation of new surfaces with necessary sand paper for applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and directed
M&L for complete removal of existing treatment and applying 3mm thick Birla white wall care putty on wall and applying two coats of distemper oil emulsion paint over a coat of alkali resistant primer including preparation of old surfaces of wall complete all as specified and directed
M&L for preparation of old surfaces and applying two coats of plastic emulsion paint 0f Make: ROYAL
M&L for preparation of old surfaces and applying one coat of oil emulsion distemper in ceiling all as directed by Engr in charge.
M&L for complete removal of existing treatment and applying 3mm thick Birla white wall care putty on wall and applying two coats of texture design paint includig preparation of old surfacescomplete all as specified and directed
M&L preparation of old wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel
M&L for applying one coat of floor guard paint on floor of Make : Asian paint or equivalent all as speicified and directed
S&F in repair vitreous China wash down water closet pan of size 360x730x740 mm including electronic seat cover, hinges,fixing accessories,accessories set and flushing cistern and connection to drain ( or outgoing pipe) etc., complete all as specified and directed by Engr in charge
S&F in repairs Health faucet with 1 metre (min) extendable metal tube and holder and fittings of make "JAQUAR" complete all as specified and directed by Engr in charge.
S&F in repairs Hand shower extendable metal tube and holder and fittings of complete all as specified and directed by Engr in charge.
S&F wall mixer 2 in 1 type with connected fitting all as directed
S& F for stailess steel paper holder of good quality and make all as directed by Engr in charge
S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long
S&F in repairs for EWC seat cover of make: JAQUAR including hinges,fixing accessories all as directed by Engr in charge
S&F in repairs CP fancy type soap dish of good qulity make: JAQUAR with fittings all as directed by Engr in charge
S & F in repair 15mm Bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed
S & F in repairs 15mm Chromium plated , fancy type,Stop valves / angle cock screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions
S&F in repairs 15mm CP two way cock screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions
S&F in repairs 15mm filter cock screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions
S&F in repair fancy type vitreous china wash basin (WHB) , white ,pedestal type type including , 32 mm dia brass Chromium plated waste fittings with long screw shanks and fly nuts , flange end embedded in red lead cement , including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply pipe and supply of taps complete all as specified
Supply & fixing in repair Pillar taps, fancy type with long nosecast copper alloy , with capstan heads, chromium plated , screwed down for 15 mm bore pipe,high pressure with long screwed shanks and fly-nuts , screwed for iron pipe ISI Marked of other specified.
S&F 15mm size PVC connection with PTMT nuts 450mm length complete all as specified and directed.
S&F in repairs CP shower fancy type including shower arm with necessary fittings all as directed by Engr in charge
Supply and fixing in repairs CP Towel rail 600mm long with and including chromium plated brass screws and fittings all as directed
S&Fin repairs grating doom type 100mm dia of PTMT (min wt 25gms)
S & F in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floors
S&F in repairs PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors all as specified and directed by Engineer In Charge.
S&F for 75mm outer dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement
S & F in repairs 40mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floors
S&F in repairs fancy type powder coated alumium cutain rod 20mm dia fixed in wall all as directed by Engr in charge.
S&F in repairs fancy type cutain brackets of brass fixed in wall all as directed by Engr in charge.
Dismantling of old wooden floor including skirting,interlocking fittings of floor etc and removing the materials outside the MoD land all as directed by EIC
S&F for Engineered wooden flooring of size1213x143x12+2mm 1st Quality African teak wood as per instruction of manufacturer all as dircted by EIC and approved by GE.
S&F for skirting for wooden flooring 1st Quality African teak wood all as per manufacturere instruction and direction of EIC and approved by GE.
M&L 80mm thick Machine pressed precastconcrete interlocking paverblock any shape and sizeconfirming to IS 15658-2006 of 80 mm thickness M-40 Gradecomplete all as specified and as directed. Note : Sand cushioning shall be measured separately.
M&L 100mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate as in sub base all as specified and directed by Engr in charge.
M&L for sand cushioning under floors in foundation including watering and consolidation all as specified.
M&L Hardcore broken stone or boulders of gauge exc. 63 mm but n exc 100mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to true surface
M&L for 18mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work fixed in repairs
Supply & Fix Solar post light 10W, 250W, 50 Hz, 800mm (W) x 2815mm (H), Cat Part No LPTSOL2600. Make : Luker/Havells/ Bajaj
Supply and Fix Solar LED Garden light 5 W, 250v, 50 Hz 255mm Dia, 595mm H Cat part No LBRSOL500. Make : Lukar/ Havells/ Jaguar
Supply and Fix Solar LED Gate light 5 W, 250v, 50 Hz 255mm Dia, 320mm H Cat part No LGLSOL57. Make : Lukar/ Havells/ Jaguar
Supply and Fix Outdoor LED Garden light (RGB Colour) 5 W, 250v, 50 Hz Cat part No LSSPK5W. Make : Lukar/ Havells/ Jaguar
Supply and Fix LED Inverter Batten 18 W, 250v, 50 Hz Cat part No SZSLBMX018iBB Make : Shankti/Lukar/ Havells/ Jaguar
Supply & Fix Ceiling Fan 1200 MM sweep, BLDC motor with remote control, 230 volts, 50Hz, Glossy white in colour, Item design as per approval by Engr-in-Charge, Make : Crompton/ Bajaj
Supply & Fix Wall Fan 400 MM sweep, 230 Volts, 50 Hz, off white in colour, Item design as epr approval by Engr-in-Charge Make : Crompton/ Bajaj
M&L for point wiring with 1.5 Sqmm PVC insulated and unsheathed copper conductor single core M&L for one point wiring with 1.5 Sqmm PVC insulated un-sheathed cable with stranded copper conductor FR-LSH confirming to IS : 694 of size 1.5 Sq mm single core, including one No 1.5 Sq single core PVC insulated un-sheathed copper cable FR-LSH as continuous earth wire drawn through and incl PVC conceiled wiring including all accessories fixed on wall as required dia with all accessories for one light/ ceiling fan/ bell point/ exhaust fan point controlled by one 5 Amps switch modular tyep one way complete as directed.
Supply & Fixing modular switch 1 way 6A, 1 module, 230 volts.
Supply & Fixing modular socket 6A, 2/3 pin combined, 2 module.
Supply & Fixing modular metal flush box 3 module.
Supply & Fixing modular white cover plate with frame, 3 module
S&F in repairs Ceiling rose surface bakelite 65 x 50mm, three terminals. 240 volts mounting on PVC block as specified.
M/S. M M S ENTERPRISES
SHREE SAI LABOUR CONTRACT CO-OPERATIVE SOCIETY LTD
Mehta and Co.
KIRAN TRADERS
M/S P S BABU
M/S Kartik Enterprises
JINTECH
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .