Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.1 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹23.1 L+₹855 (0.04%)Rejected-Finance NIVADA TIVAYA ROAD TIVYA MUST BUS STOP VILLAGE KHATAULI SAHARANPUR UP 247001 | SAHARANPUR | SAHARANPUR | UP | 247001 | L2 | Rejected-Finance Not lowest bidder | |
| 3 | L3₹23.9 L+₹86,005 (3.73%)Rejected-Finance 127 OLD NAGAR PALIKA BUNGLOW NO 60 NEEMUCH MP NEEMUCH MADHYA PRADESH 458441 INDIA | NEEMUCH | MADHYA PRADESH | 458441 | L3 | Rejected-Finance Not lowest bidder |
Tender Value
₹46.8 L
EMD Value
₹93,500
Closing Date
2 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE South Delhi Cantt-10
GE South Delhi Cantt-110010
WELCOME MAINT OF OFFICERS MD ACCN AT TARAPORE ENCLAVE (RANGPURI) IN THE AREA OF AGE B/R-II (S) AND AGE E/M (S) OF GE (SOUTH) DELHI CANTT-10
2022_MES_516713_2
GE/DS-03/2022-23
Open Tender
Civil Works
Item Rate
270 days
GE South Delhi Cantt
Please refer Tender documents.
11 documents required · 11 mandatory
₹500
GE South Delhi Cantt
₹93,500
Yes
16 Jun 2022
12 May 2022
4 Jun 2022
12 May 2022
2 Jun 2022
19 May 2022
60 days
Amount
M&L for prepartion of old distemperd/painted surface of wall surface by washing down, rubbing and stopping including brooming down or steel wire brushing scrapping down smoke soot, moulds moss and efforescent salts and trading oil and greasy spots thereafter filling of holes and cracks with filler (wall care putty) to obtain an even and smooth wall surface and applying one coat of oil bound distemper including scaffolding arrangement, trestles, ladders complete all as specified and directed by Engineer-in-Charge.
All as per item No 1 but here-in-before applying two coats of oil bound distemper, complete all as specified and directed by Engineer-in-Charge.
All as per item No 1 but here-in-before applying one coat of white wash on ceiling, complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of old plastered surfaces of wall thereafter filling of holes and cracks with filler (wall care putty) to obtain an even and smooth wall surface and applying one coat of white wash including scaffolding arrangement, trestles, ladders complete all as specified and directed by Engineer-in-Charge.
All as per item No 4 but here-in-before applying but two coat of white wash on wall surface, complete all as specified and directed by Engineer-in-Charge.
M&L for Preparation of old wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of old painted surfaces of steel of any description over 10cm width or grith and applying one coat of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge.
Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.
M&L for 15 mm thick cement plaster with readymix plaster (as per manufaturer's instruction) on fair faces of brick wall or concrete surfaces finished even and smooth, (without using extra cement) complete all as specified and directed by Enigneer-in-Charge. Note:- 1. Make of readymix plaster shall be Birla Aerocon/Ultratech readiplast/ACC Accoplast / Fosroc Chemical (India) Pvt Ltd Renderoc and as approved by GE) 2. The readymix plaster shall be procured directly from the manufacturer or their authorised dealer. 3 The contractor shall produced original purchase voucher alongwith test certificate of readymix plaster while claiming RAR/ Final Bill.
M&L for 10 mm thick cement plaster with readymix plaster (as per manufaturer's instruction) on fair faces of brick wall or concrete surfaces on ceiling finished even and smooth, (without using extra cement) complete all as specified and directed by Enigneer-in-Charge. Note:- 1. Make of readymix plaster shall be Birla Aerocon/Ultratech readiplast/ACC Accoplast / Fosroc Chemical (India) Pvt Ltd Renderoc and as approved by GE) 2. The readymix plaster shall be procured directly from the manufacturer or their authorised dealer. 3 The contractor shall produced original purchase voucher alongwith test certificate of readymix plaster while claiming RAR/ Final Bill.
M&L for preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and directed by Engr-in-Charge.
M&L for preparing of newly plastered or unplastered surfaces of ceiling and applying three coats of White wash, complete all as specified and directed by Engr-in-Charge.
M&L preparation of newly plastered surface of walls and applying three coats of white wash complete all as specified and directed by Engr-in-Charge.
M&L for preparing newly plastered or unplastered surfaces of wall and applying two coats of oil bound distemper over one coat of birla white putty on whole surface, complete all as specified and directed by Engr-in-Charge.
S&F in repairs, mixing valve 15mm bore, hot & cold CP brass fancy including joints to steel pipe or unions for centre hole wash hand basin, including fittings complete all as specified and directed by Engineer-in-Charge.
S&F in repairs, wall mixing valve 15mm bore hot & cold CP brass fancy with L-bend joints to steel pipe or unions, with fittings, complete all as specified and directed by Engineer-in-Charge.
S&F in repairs, sink mixing valve 15mm bore hot & cold CP brass fancy type joints to steel pipe or unions, with fittings, complete all as specified and directed by Engineer-in-Charge.
Hacking out old broken glass any thickness size and quality from wooden/steel frames etc complete all as specified and directed by Engr-in-Charge.
S&F sheet glass ordinary quality, 3 mm thick and glazing with oil putty in square n. exc. 0.50 Sqm in each pane complete all as specified and directed by Engr-in-Charge.
S&F 3 mm figured glass, pin head type and glazed with oil putty in sqm n exc 0.50 Sqm in each pane complete all as specified and directed by Engr-in-Charge.
S&F sheet glass ordinary quality, 5 mm thick exc. 0.50 Sqm in each pane / shelvs complete all as specified and directed by Engr-in-Charge.
S&F in repair 20mm dia aluminium drapery rod, coated finish including teak wood brackets & end knob as required with teak wooden curtain rings complete all as specified and directed by Engr-in-Charge.
S&F in repair ss towel Rack fixed with sutable screw on wall complete all as specified and directed by Engr-in-Charge. Make:- Prayag Cat part No BA-03 or its equivalent as specified make.
S&F in repair ss toilet paper holder complete all as specified and directed by Engr-in-Charge. Make:- Prayag Cat part No BA-48 or its equivalent as specified make.
S&F in repairs plastic WC seat cover white/ off white closed pattern with flat bottom end cover and mild steel CP hinging device complete all as specified and directed by Engr-in-Charge.
S&F in repairs, CP health faucet alongwith 1.00 to 1.50 meter good quality SS flexible connection pipe suitable for 15mm bore pipe, complete all as specified and directed by Engineer-in-Charge.
S&F in repairs, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets of 10 litre capacity, complete all as specified and directed by Engineer-in-Charge. (Make : Prayag, Cera, Commander)
S&F in repairs, PVC waste pipe 32 mm bore, 65 cm long plain/ corrugated including suitable adopter complete all as specified and directed by Engineer-in-Charge.
S&F in repairs, stainless steel grating dome 100 mm bore of best quality complete all as specified and directed by Engineer-in-Charge.
S&F in repairs, 15 mm bore bib tap, brass chromium plated fancy type, long body screwed down for iron pipe complete all as specified and directed by Engineer-in-Charge.
S&F in repair Vitreous china wash down water closet pan (pedestal pattern) ,including connecting to drain (or outgoing pipe), fix with white cement, complete all as specified and directed by Engineer-in-Charge.
S&F in repair Vitrous china wash hand basin white, ovel type over counter Wash hand basin size 550x 420mm, including necessary waste pipe and coupling, Fixing in Granite countern complete all as specified and directed by Engr-in-Charge.
S&F in repairs, Brass chromium plated shower rose 125mm size with arm, complete all as specified and directed by Engineer-in-Charge.
S&F in repairs, CP waste coupling 32/40 mm dia suitable for wash hand basin or kitchen sink complete all as specified and directed by Engineer-in-Charge.
S&F in repairs, 15mm dia brass chromium plated angle valve screwed at ends complete all as specified and directed by Engineer-in-Charge.
S&F in repairs, PVC connection 15mm bore with brass nut of length 450 mm long for hot water pipe complete all as specified and directed by Engineer-in-Charge.
S&F in repairs Sinks made of stainless steel 1mm thick for kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets of mild steel angle 35x35x5mm and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed by Engineer-in-Charge.
S&F in repairs stainless steel plate rack made of 1mm thick stainless steel sheet of size 910 mm x 460 mm x 210mm consisting of 3 shelf for bowls and one shelf for keeping six nos of big utensil and seven nos of small utensils divided by 10 mm dia stainless steel hollow pipe @ 60 mm centre to centre complete all as specified and directed by Engineer-in-Charge.
S&F in repairs, brass spindles with knobs (05 No) suitable for concealed stop valves all as per sample, complete all as specified and directed by Engineer-in-Charge.
M&L for complete removal of existing treatment from internal surfaces of walls or a part thereof (In Patches ), area exe 1.00 Sqm but not exceeding 3.00 Sqm, which is damage due to seepage or any other reason & preparing and levelling the disturbed surfaces by using wall care putty (JK/Birla white) to obtain even and smooth wall surfaces of that portion and using sand paper and than applying two coats of oil bound distemper over a coat of primer, including scaffolding arrangement, trestles, ladders complete all as specified and directed by Engineer-in-Charge.
M&L for complete removal of existing treatment from internal surfaces of walls or a part thereof (In Patches ), area exceeding 3.00 Sqm but not exceeding 5.00 Sqm , which is damage due to seepage or any other reason & preparing and levelling the disturbed surfaces by using wall care putty to obtain even and smooth wall surfaces of that portion and using sand paper and than applying two coats of oil bound distemper over a coat of primer,including scaffolding arrangement, trestles, ladders complete all as specified and directed by Engineer-in-Charge.
S&F in repairs HDPE PVC lid (cover) for 300 to 1000 Litres capacity PVC water tanks, complete all as specified and directed by Engineer-in-Charge.
S&F in repair magnetic catcher for wooden cupbord with complete closer macanigum claps and clips fix with stainless steel screw.complete all as specified and as directed by Engr-in-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premices complete all as specified and directed.
M&L for first quality Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc laid on 15mm thick cement screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade of tiles, complete all as specified and directed by Engineer-in-Charge.
M&L for Virified Ceramic tiles, light shade, 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. laid over 15mm thick cement mortar screed bed of CM (1:6) , set and jointed in neat cement slurry @ 3.00 kg per Sqm and pointed in white or coloured cement to match the shade of tile, complete all as specified and directed by Engineer-in-Charge.
M&L for joint free coloured glazed ceramic tiles in patches vertical surfaces 300x200x7mm/450x300x7mm thick set and jointed in cement slurry and pointed in white or coloured cement to match laid over & including 15mm thick cement mortar 1:4 complete all as specified and as directed.
S&F in repair looking mirror of size 900x600x6mm thick, back side laminated PVC Sheet, Fixied with sutabe screw/ nobs in wall surface complete all as specified and directed by Engr-in-charge. Make:- Prayag Cat part No BLM 03 or its equivalent as specified make.
S&F in repairs white cover plate with frame, 1 module complete all as specified and directed by Engineer in Charge. (Make : Precision, Cat part No. D 1101 or its equivalent of Crabtree of havells / Marius of Legrand).
S&F in repairs white cover plate with frame, 2 module complete all as specified and directed by Engineer in Charge. (Make : Precision, Cat part No. D 1101 or its equivalent of Crabtree of havells / Marius of Legrand)
S&F in repairs white cover plate with frame, 3 module complete all as specified and directed by Engineer in Charge. (Make : Precision, Cat part No. D 1101 or its equivalent of Crabtree of havells / Marius of Legrand).
S&F in repairs white cover plate with frame, 4 module complete all as specified and directed by Engineer in Charge. (Make : Precision, Cat part No. D 1101 or its equivalent of Crabtree of havells / Marius of Legrand).
S&F in repairs white cover plate with frame, 6 module complete all as specified and directed by Engineer in Charge. (Make : Precision, Cat part No. D 1101 or equivalent of Crabtree of havells / Marius of Legrand).
S&F in replacement of MS Box for switch boards of size 1 or 2 module including removing and refixing all acessories such as switches, sockets and fan regualators etc as required of suitable length & size as exesting and making good surface of switch board box after repair including all fitting as per existing complete all as specified and directed by Engineer in Charge. (Note:-The rates are inclusive of cutting /chasing including making good to disturb surfaces with CM 1:3 of same surface finished with the adjoining surface of disturbed area ).
All as per item No. 54 above but here-in-before MS Box of size 3 module.
All as per item No. 54 above but here-in-before MS Box of size 4 module.
All as per item No. 54 above but here-in-before MS Box of size 6 module.
S&F in replacement of Switch modular type, 1Module, 6 Amps one way complete all as specified and directed by Engineer in Charge. (Make : Precision, Cat part No. D 1101 or its equivalent of Crabtree of havells / Marius of Legrand).
S&F in replacement of Switch modular type 1M 6 Amp 2-way complete all as specified and directed by Engineer in Charge. (Make : Precision, Cat part No. D 1101 or its equivalent of Crabtree of havells / Marius of Legrand).
S&F in replacement of Bell push modular type 1M 5/6 Amp complete all as specified and directed by Engineer in Charge. (Make : Precision, Cat part No. D 1101 or its equivalent of Crabtree of havells / Marius of Legrand)..
S&F in replacement of Socket outlet modular type 2M, 2/3 pin, 6 Amp complete all as specified and directed by Engineer in Charge. (Make : Precision, Cat part No. D 1101 or its equivalent of Crabtree of havells / Marius of Legrand).
S&F in replacement of Switch modular type 1M, 16 Amp complete all as specified and directed by Engineer in Charge. (Make : Precision, Cat part No. D 1101 or its equivalent of Crabtree of havells / Marius of Legrand).
S&F in replacement of Socket Outlet modular type 2M combined shuttered, 5 pin 6/16 Amp complete all as specified and directed by Engineer in Charge. (Make : Precision, Cat part No. D 1101 or its equivalent of Crabtree of havells / Marius of Legrand)
S&F in replacement of Electronic fan regulator, modular type 2M, 4 steps, complete all as specified and directed by Engineer in Charge. (Make : Precision, Cat part No. D 1101 or its equivalent of Crabtree of havells / Marius of Legrand).
S&F in replacement of Single Phase Motor Starter Switch 16/20/25 Amps for AC's point, complete all as specified and directed by Engineer in Charge. (Make : Precision, Cat part No. D 1101 or its equivalent of Crabtree of havells / Marius of Legrand).
S&F in replacement of switch piano flush type 5/6 Amps SP one way complete all as specified and directed by Engineer in Charge.
S&F in replacement of Socket outlet 2-in-1, 5/6 Amps flush mounted 5 pin multi purpose complete all as specified and directed by Engineer in Charge.
S&F in replacement of switch socket combination 5-in-1, 6/16 Amps flush type, with indicator complete all as specified and directed by Engineer in Charge.
S&F in replacement of lamp holder Angle/Batten type bakelite insulated body with back plate suitable for batten fitting complete all as specified and directed by Engineer in Charge.
S&F in replacement of Electric Bell (Buzzer) AC, 230 volts single phase complete all as specified and directed by Engineer in Charge.
S&F in replacement of Bell Electric Ding Dong type 230 volts single phase complete all as specified and directed by Engineer in Charge.
S&F in replacement of old unserviceable plug top 15/16 Amps for Geyser, complete all as specified and directed by Engineer in Charge.
S&F in replacement of electronic fan regulator minimum 4 stepped Switch type suitable for ceiling fan of 1200/ 1400mm sweep as per site requirement complete all as specified and directed by Engineer in Charge.
S&F in replacement, decorative wall light mounting suitable for LED Lamp upto 15 Watt complete with all connections all as specified and directed.
S&F Surface mounting Round/ Square shaped LED downlighter 12 Watt any type complete with including new fliexble wire as required on site and including taking down of old unsv existing ceiling light fitting complete all as specified and directed by Engr-in-charge.
S&F in replacement LED 10 watt white Bulk head in engineering plastic housing with clear prismatic including required LED bulb and all accessories connecting up twisted flexible copper conductor cable of suitable size of 230 V, 50 Hz as per site requirement complete all as specified and directed by Engr-in-Charge.
S&F in replacement MCB TPN 63 Amps 415 volts, 'C' Series 10 KA complete all as specified and directed by Engr-in-Charge.
S&F in replacement MCB SPN 63 Amps 230 volts, 'C' Series complete all as specified and directed by Engr-in-Charge.
S&F in replacement MCB SP 6 to 32 Amps 230 volts, 'C' Series complete all as specified and directed by Engr-in-Charge.
S&F wall mounted LED Integrated batten 20Watt - 4ft white, 6500K, indoor decorative PVC extruded LED batten- Integrated type in replacement of old unsv existing 36/40Watt FTL fitting any type, complete all as specified and directed by Engr-in-charge.
S&F wal mounted LED Integrated batten 10Watt - 2ft white, 6500K, indoor decorative PVC extruded LED batten- Integrated type in replacement of old unsv existing 18/14 watt FTL fitting any type, complete all as specified and directed by Engr-in-charge.
S&F in replacement ceiling rose surface Bakelite 65x25 mm two to three terminals complete all as specified and directed by Engr-in-charge.
Notes for BoQ :- The rate quoted by the tenderer shall inclusive of the provision as mentioned under Note Ser No. (i) to (v) here-in-after the tenderer are advice to keep in mind these provisions while quoting his rates. 1. The tenderer has to bring the consumable material which loose their identity like synthetic enamel paint, OBD, cement base paint, plastic emulsion paint, Lime, exterior emulsion paint, etc well in advance along with original purchase voucher as per sample approval by as under. These material when brought by the tenderer shall be checked by BOO as detailed by GE and shall be kept in custody of concerned JE and rep of contractor with double look arrangement in store room. The material shall be issued on daily basis as per site requirement. A Pucca bond register shall be maintained by the contractor showing total quantity in hand, quantity issued and quantity incorporated in the particular quarter which shall be initiated by both the party i.e JE and rep of contractor:- (i) 25% of total reqd material as per CA provision within 10 days from the date of commencement of work. (ii) 25% of the total reqd material as per CA provision within 03 month from date of commencement of the work or earlier as per site requirement. (iii) 25% of the total reqd material as per CA provision within 06 months from the date of commencement of the work or earlier as per site requirement. (iv) Balance 25% of the reqd material as per CA provision within 02 month before the date of completion or earlier as per site requirement. (v) Engineer-in-charge/ JE shall ensure the above provision is followed before commencement of the work at site.
2. The Qtr for welcome maintenance shall be handed over to contractor as per vacation/ allotment of Qtr and users requirement. After handing over the Qtr, the tenderer has to complete the work within 07 days for normal repair and 15 days for major repair as decided by Engineer-in-Charge which includes Sunday/ holiday. Necessary panel recovery shall be made Rs. 1000 per day if the qtr not handed over within the above stipulated time after handing over of Qtr. A Pucca bond register shall be maintained at site showing Qtr No, date of vacation, date of handing over the Qtr, proposed date of completion and actual date of completion which shall be got signed by the occupant/users. 3. Every stage like preparation of surfaces, first coat, second coat/ final coat of finishes shall be got passed by Engineer-in-Charge. 4. The replaced fitting of fixture which have been replaced under this contract shall be intimated to BSO for incorporating in inventory before handing over the Qtr. 5. The contractor shall cover all the furniture item while doing painting and other repair work, clean the entire house including paint marks on joinery items, glass panes, cupboard etc with entire satisfaction of Engineer-in-Charge before handing over the key back after welcome maintenance. 6. All the above documents shall be produced for verification at the time of payment of each RAR/Bill.
Note:- The contract sum shall be after deducting the amount of Credit shown in Credit Schedule of this Tender.
Chaudhary Constructions
JINDAL ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .