Estimate for Laying UPVC U/G Pipe line for Outlet RD 81250/R of Riarki Disty, RD 81180/L of Riarki Disty, RD 83617/L of Riarki Disty and RD 85975/R of Riarki Disty.

Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cuttingin streets or open area including and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation , including the costofdiversion for traffic, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving leadupto15meter complete in all respect

Earthwork in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressingof bottomandsides of trenches, stacking the excavatedsoil clear fromthe edge of excavation and subsequent filling around masonryin15cm, layerswith compaction includingdisposal of all surplussoil asdirected within lead of 30 metres.

First class brick laid in cement sandmortar 1.6 in foundation and plinth

10mm thick cement plaster 1.4 on sides walls

10mm thick cement plaster 1:4 on floor

Reinforced cement concrete 1:2:4 hand mixed but including steel reinforcement

Cement Conc.1:2:4 including supply, carriage&withstone ballast or shingle

Laying and jointing of UPVCpipe225mmdiaof 2.5kg/ sq cmpressure ISIMarked UPVC Pipesasper ISI-4985 along the Trenchesandlayingthesame in Trenches to correct alignment and gradients,cutting, jointingand testing complete as per specifications.

Providing, laying, fixing, testing and commissioning of Class heavy duty MS Pipe conforming to Indian Standard IS:1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nutsbolts, gasketsetc.fixing the pipe on the wall /ceiling with suitable clamp sandpaintingwith two or more coats of synthetice paint of required shade complete in all respects. (d)50mm internal diameter

Wrought Ironandmild steel ladders, framedgrills,grating etc.complete fixed in position in D-tank

Providing orange colour safety footrest of minimum 6mm thick plastic encapsulated as per IS:10910 on 12mmdia steel bar confirming to IS:1786 havingminimun cross sectionas23mmx25mmand over all minimum length 263mm and width as 165mm

Providing and fixing of Alfa Alfa Valve250mmdia fitted on riser pipe to act as Nakka (D regulators)

Centering andShuttering for Concrete faces

Providing & Fixing of Steel Shutter Gate Assembly in MainPipeline complete inall respect (225 mm)

Providing and fixing 225mm Elbow/bends of 90 degree 6kg/cm2 pressure as per IS 4985i/c testing commisioning and completeinall respect to the specification of engineerin charge

Providingand fixing225mm equal Tee of 6kg/cm2 pressure as per IS4985 i/c testing commisioning and complete inall respect tothe specification of engineer in charge

Providing and fixing MS service saddle 225 x 50mm as per IS 4985 i/c testing commisioning andcomplete in all respect to the specification of engineer in charge

Providingand fixingTail end piece225mmof 6kg/cm2 pressure as per IS4985 i/c testing commisioning complete inall respect tothe satisfaction of engineer in charge

Providing & fixing C.I/D.I Flangedend,stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves (315mm) ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge).B)ClassPN-1.6as per ISI (225 mm)

Providing& fixing Single air valve ISI Marked as per IS-14845 including jointing all carriages complete .C.I single air valve (Size 50mm)

Laying and jointing of UPVC pipe250 mmdia of 2.5kg/sq cm pressure ISI Marked UPVCPipesasper ISI-4985 along the Trenches and laying the same in Trenches to correct alignment and gradients,cutting, jointing and testing complete as per specifications. "

Providingand fixing250mm Elbow/bends of 90 degree 6kg/cm2 pressure as per IS 4985i/ctesting commisioning and completein all respect to the specification of engineer in charge

Providing and fixing 250mm Elbow/bends of 45 degree 6kg/cm2 pressure as per IS 4985i/ctestingcommisioning and complete in all respect to the specification of engineer in charge

Providing and fixing 250mm equal Tee of 6kg/cm2 pressure as per IS4985 i/c testing commisioning and complete inall respect to the specification of engineer in charge

Providing and fixing MS service saddle 250x50 mm as per IS 4985 i/c testing commisioning and complete in all respect to the specification of engineer in charge

Providingand fixingTail end piece 250mmof 6 kg/cm2 pressure as per IS4985 i/c testing commisioning complete inall respect to the satisfaction of engineer in charge

Providing & fixing C.I/D.I Flanged end,stem of SS(AIS 1410) and Bronze(gunmetal) working parts Sluice Valves (250mm) ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge).B)ClassPN-1.6as per ISI

Cement Concrete 1:4:8 with brick ballast 40 mm gauge

Providing and fixing of Alfa Valve 225 mm

Providing and fixing 225mm Elbow/bends of 45 degree 6kg/cm2 pressure as per IS 4985 i/c testing commisioning and complete in all respect to the specification of engineer in charge

Providing and fixing single air valve ISI Marked as per IS-14845 including jointing all carriages complete C.I. single air valve ( Size 50 mm)

Providing & Fixing of Steel Shutter Gate Assembly in Main Pipeline complete in all respect (250 mm)

Any Other

# of occurrences