GE(S)BTD 02 OF 2025-26 SPECIAL REPAIR AND MINOR WORKS UNDER AGE BR II AND AGE EM IV UNDER GE(S) BATHINDA AT BATHINDA MIL STN Job No. (SR(B)-06 of 2024-25 Minor-31 of 2024-25 and Minor-35 of 2024-25)

Amount

Dismantling of Stone slabs and tiles laid, bedded and pointed in any type of mortar of any description or thickness in floors, aprons etc

M&L Machine cut kota stone slab flooring 20-25mm thick over 15 mm thick cement screed bed in CM 1: 6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and complete all as specified & directed.

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10 mm thick backing coatin CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and complete all as specified & directed.

Material and Labour for double charged VitrifiedTiles , of area exc 0.42 sqm but n exc 1.00 sqm and 7-8 mm thick or of size as approved as in floors set and jointed in neat cement slurry and pointed in white cement with pigments to match over and including the provision of 15 mm thick bedding layer in CM 1:6 including dismentalling of old tiles complete all as specified and directed.

Description all as per Ser item No. 04 above but on vertical surfaces as in skirtings etc on 10mm thick back coat in CM 1:4, including dismentalling of exsiting tiles complete all as specified and directed.

Material and labour for joint free non-skid coloured ceramic tiles 7-8 mm thick (square / rectangular), area of each tiles exceeding 0.18 Sqm but not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white cement with pigment or coloured cement to match the shade of tiles over and including 15 mm thick screed plaster with adhesive incl dismentalling of old /broken tiles complete all as specified and directed.

Material and Labour for joint free glazed ceramic coloured tiles of approved quality in vertical surfaces 600mm x 300 x 7mm thick set jointed in neat cement slurry/paste and pointed in coloured cement to match with the tiles over and including 10mm thick plaster with adhesive incl dismentalling of old /broken tiles complete all as specified and directed.

M&L Granite (black) work 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15 mm thick Screed bed or bedding layer in CM 1:4 complete all as specified and directed.

M&L 20mm thick Granite (black) machine cut (table rubbed and polished), in skirting/ dado, riser etc laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

S&F Factory made single extruded WPC ( Wood Polymer Composite ) Solid Door Frame /Chowkhat of Size 45mmx70 mm comprising of virgin polymer of K value 58-60 (susension grade ), Calcium Carbonate and nautral fibers ( Wood Powder /rice husk/wheat husk ) and non toxic additives (max toxcity index of 12 for 100 gms ) fabricated with miter joints after applying PVC Solvant cement and screwed with full body threaded star headed SS screws having minimum density of 750 kg /cum and screw withdrawl strength of 2200 N (face ) & 1100 N (Edge) minimum Compressive strength of 508 N /sqmm modulus of elasticity 900 N/Sqmm and resisitence to spread of flame of class A cat with property of being termite / borer proof , water moistur proof and fire retaident and fixed in position With MS hold Fast /SS Dash Fastner including taking down old frame/chowkhat including 100 mm size SS Butt Hinges (03 Nos Per Frame ) as specified and as directed by engr-in charge.

S&F Factory made single extruded WPC ( Wood Polymer Composite ) Solid Plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (susension grade ), Calcium Carbonate and nautral fibers ( Wood Powder /rice husk/wheat husk ) and non toxic additives (max toxcity index of 12 for 100 gms ) having minimum density of 650 kg /cum and screw withdrawl strength of 1800 N (face ) & 900 N (Edge) minimum Compressive strength of 50 N /sqmm and resisitence to spread of flame of class A cat with property of being termite / borer proof , water moistur proof and fire retaident and fixing including taking down old shutter and and S&F 01 no 300 mm SS Sliding Door Bolt ( Per Door Shutter ) and 02 no 150 mm SS Handle ( Per Door Shutter ) and 02 Nos SS Tower Bolt 200 mm Long ( Per Door Shutter ) and as specified and directed by engr-in charge

S&F Factory made single extruded WPC ( Wood Polymer Composite ) Solid Plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (susension grade ), Calcium Carbonate and nautral fibers ( Wood Powder /rice husk/wheat husk ) and non toxic additives (max toxcity index of 12 for 100 gms ) having minimum density of 650 kg /cum and screw withdrawl strength of 1800 N (face ) & 900 N (Edge) minimum Compressive strength of 50 N /sqmm and resisitence to spread of flame of class A cat with property of being termite / borer proof , water moistur proof and fire retaident and fixing including taking down old shutter and and S&F 02 no 150 mm SS Handle ( Per Door Shutter ) and 02 Nos SS Tower Bolt 200 mm Long ( Per Door Shutter ) and as specified and directed by engr-in charge

Ditto all as per item No. 12 above but of double shutter frame size 65 x 125 mm

S & F Stainless steel wire cloth 0.36 mm nominal dia of wire and avarage width of aparture 1.40mm and fixed etc. complete all as specified and directed.

300 mm size mild steel ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed.

Supply and fixing powder coated anodised aluminium frame for doors, windows, ventilators and partitions with one or more rebates including joining cleat for fixing etc. complete all as specified and directed .

Supply and fixing powder coated Anodised aluminium door shutters,/ windows and ventilator shutter aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc including 4.8 mm thick glass /12 mm thick prelaminated particle board,interior grade prelaminated both sides with decorative choice laminations , complete all as specified and directed .

S & F 4 mm thick figured glass, pin head type and glazing with oil putty in ventilator complete.

S & F 4 mm Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane

Supply and fixing three layers 500 litre HDPE water storage tanks polyproof. white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position including Supply and fixing of suitable size inlet/outlet arrangement & other accessories incl dismentalling of exsiting 500 ltr capacity tank and s&f of 20 mm bore ptmt float valve with anodised heavy duty rod and ball complete all as specified and directed.

Supply and fixing three layers 1000 litre HDPE water storage tanks polyproof. white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position including Supply and fixing of suitable size inlet/outlet arrangement & other accessories incl dismentalling of old exc tank of 1000 ltr capacity and s&f of 20 mm bore ptmt float valve with anodised heavy duty rod and ball complete all as specified and directed.

M&L in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete including provision of lime concrete bedding

Vitreous China valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets suitable for wall hung EWC complete in all respect all as specified.

S&F Counter Wash basins, Vitreous China (oval type) size 560X 410 mm, including 32 mm Chromium plated waste coupling of fixing of supply and waste pipe/bottle trap including making connections and fixed in position complete in all respect as specified.

S&F in repair Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed

S&Fin repair 15 mm Swan neck fency type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S&F in repairs Vitreous China Urinal, Half stall type, white including 40mm waste coupling including making connections and fixed in position complete in all respect as specified.

S&F in repair Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)

S&F in repair Vitreous china urinal partition white of size 310x700 mm terminating about 40cm above floor line,

S&F in repair 15mm Bib taps, chromium plated fency type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

S&F in repairs 15mm angle stop valves,fency type chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions

S&F in repairsPVC connections 15mm size with PTMT nuts of length 450mm

Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided and removing rubbish from the site as directed complete all as directed and M&L PCC 1:5:10, type E-2 as in filling of sunken floors etc. complete all as specified and directed.

Water proofing treatment to sunken slab and adjoining vertical surfaces as specified under:- (a) Cleaning of RCC surface to remove dust , loose particles etc with compressed air or any other suitable technique depending on site conditions grinding any sharp edges etc complete all as specified and as directed by engr-in-charge. (b) Supply and apply a glass fibre reinforced modified cementitious coating system (i) Base Coat : HS LATEX plus ( Consumption base coat 0.30kg/Sqm) (ii) Reinforcement : Glass Fibre (iii) Second And Third Coat : HS Latex Shield 2K (consumption Qty 3 Kg/Sqm) System Requirement : density 2.00kg/ltr abd Compressive Strength : 0.5N/mm2 (b) M&L rendering 15 mm thick in cement plaster (1:4) using coarse sand mixed admixed with integral water proofing compound as per manufacturer's instruction trowel even and smooth with steel trowel on sunken surfaces Note : HS Power Plasticizer (Consumption :0.10 kg per Bag of Cement )

Supply only liquid water proofing compound ISI marked confirming to IS 2645 - 2003 all as specified.

Cleaning of old Roof / wall concrete surfaces & repairing the surface irregularities like cracks, potholes, as per manufacturers instructions (a) Making V-grooves with cutter, hammer,chisel upto 5- 10 mm in between the cement tile sand filling will be done with HS latex putty and HS PU sealant. (b) Exposed Roof&Walls Supply and apply PU based waterproofing and heat reflecting system having following key performance properties: (i) UVresistant and resistant to yellowing and weathering (ii) Highly elastic and crack bridging (iii) Non-toxic and VOC complaint water based coating (iv) One component ready to use (v) Excellent adhesion on porous and nonporous substrates (vi) Seamless water proofing membrane Water vapour permeable Material shoud have below properties Solid content -60% ( ASTM D 1644) dnsity(gm/cc)-1.30 (ASTM D1475) Elognation-350% (ASTM D 2370) Tensile strength N/sqmm-2.8-2.9 (ASTM D 2370) Solar reflective index -100 according to ASTME1980 System: Providing and applying primer over the prepared surface with Homeshield PU rooKoat Firstcoat:Material:Water=1:1 by weight Total thickness: ~~0.4 – 0.5 mm (Consumption: 0.25 kg/m2.) Reinforcement: Glass fiber mesh second coat: Homeshield PUroofKoat (Consumption : 0.5 kg/m2.) Third coat:Homeshield PUroofKoat (Consumption: 0.5 kg/m2.) Note : The installation company of roofing system should be trained and authorized by Manufacturer & installation to be carried out as per manufacturers approved method statement. All auxiliary & accessories involved during aplicationshouldbesuppliedbysinglemanufactureras a part of system. Any component used which is not manufactured by the roofing manufacturer can only be used with official approval from manufacturer.

M & L in repair PCC 1:2:4 for PCC type B-0 using 12.50 mm graded stone aggregate as in coping steps bed blocks etc of any thickness , complete all as specified and directed by Engineer-in-Charge

Demolition of mud in roof, any thickness including plastering and leaping (where full thickness recovered or only a part there of) of any thickness including removal of mud complete all as specified and directed by Engineer-in-Charge

Dismantling of brick tiles or terracing tiles single layer on roof & disposal of retrieved material upto a distance n.exc 100m where directed, all as specified and directed.

M&L screed bed or bedding layer of mortar 1:4 of 15mm thick as on roof surfaces parapet or vertical beam surface (horizental or vertical) of finish even and smooth witout using extra cement. Note using only course sand (Toka sand) in screed bed/plastering.

S&F 16 mm CPVC pipe sdr11and plain CPVC sdr11 fitting with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm including taking down old pipes of 15mm bore of any description complete all as specified and directed.

S&F 20 mm CPVC pipe sdr11and plain CPVC sdr11 fitting with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm including taking down of old pipes of 20mm bore of any description complete all as specified and directed.

S&F in repair 110mm dia Pvc SWr Pipes single socketed in any length with rubber ring joints fixed to walls and fixing with clamps complete all as specified.

S&F 110 bore, PVC Swr bends Juction , Tee and Y (any radius), p trap/ floor trap /s trap diminishing pieces or tapers (large bore measured) with oval access door as in repairs complete all as specified and directed.

S&F in repair 75 mm dia Pvc SWr Pipes single socketed in any length with rubber ring joints fixed to walls and fixing with clamps complete all as specified.

S&F 75 bore,PVC SWR , bends , junction , TEEand Y (any radius) p trap/ floor trap /s trap , diminishing pieces or tapers (large bore measured) with oval access door as in repairs complete all as specified and directed.

S & F 20 mm thick granite slabs for wash hand basin over 15 mm thick screed bed in CM 1:6 including moulding and nosing of corners/ edges complete all as specified and directed,

Material and Labour for providing precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate in cooking plateform/slab including necessary formwork and setting in mortar set in cement mortar (1:4) complete all as specified and as directed.

M/Lfor half brick work with sub-class 'B' bricks, straight or curved on plan exc 6m mean radius built in In cement mortar 1:4

M&L for TMT bars 10 mm dia and over cut to length and bent to shape required including cranking, hooking ends and binding with and MS wire not less than 0.9 mm dia or securing with clips

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde?E- 250) quality?A?

S&F Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L brick work with sub class 'B' old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 incl 15 mm thick render in cement mortar in 1:4 incl demolition of old brickwork complete all as specified and directed.

Material and labour for 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces and finishing even & smooth but without using extra cement & with using integral water proofing compound uincl Material and labour for applying two coats of cement base paint over a coat of primer on newly plastered wall surfaces including cornices & pillasters etc as per manufacturer's specifications & instructions including preparation of surface, including taking down old cement plaster complete all as specified and directed.note : cost of wpc shall be included in this quoted rate nothing extra shall be paid on this account.

Material and labour for rendering 15 mm thick in cement mortar in (1:6) on other then fair faces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement incl M & L for preparation of new plastered surafaces of walls and applying two coats of acrylic distemper over a coat of primer complete all as per manufacturer instructions and including taking down old cement plaster all as specified and directred.

Material and labour for Dubbing out average 10mm thick on irregular surface of Ceiling in cement mortar in (1:3) finishing the surface even & smooth without using extra cement and incl Material and labour for applying three coats of white wash on newly plastered or unplastered ceiling surfaces including preperation of surfaces, including taking down old cement plaster complete all as specified and directed. complete all as specified and directed.

M&L for complete removal of existing treatment on old plastered surface and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth including two coat of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.

M&L for Complete removal of existing treatment of any description on old wall surfaces plastered or unplastered surfaces of walls and applying two coat of cement base paint on walls including cornices etc complete all as specified and directed.

M&L for complete removal of existing treatment on old plastered surface and Finishing walls with two coat ofAcrylic Smooth exterior paint of required shade : ( applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed

M&L Preparation of old plastered or unplastered old decorated surfaces of ceiling by brooming for down or steel wire brushing, scrapping down make spots, treating oily/greasy spots, mass and efflorescence and applying one coat of white wash on ceiling including cornices etc complete all as specified and directed.

S&F 50 mm bore Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 laid in trenches or fixed to wall complete all as directed

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil.

M&L for Hardcore of broken stone or boulders gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M&L Cement concrete Type C2 , 1:3:6 in foundations, filling and mass concrete (40 mm graded aggregate)

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L Machine pressed coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade Fixed with grey cement and pigment

M&L Reinforced cement concrete (nominal mix) Type B1 (1:2:4) using 20 mm graded stone aggregate in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete

M&L Reinforced cement concrete (nominal mix) Type B1 (1:2:4) using 20 mm graded stone aggregate in Columns, pillars, piers, posts and struts

M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter on rough finished flat surfaces of concrete

M&L Formwork to sides of pillars, posts, struts, piers, columns and stanchions on rough finished square/ rectangular/ polygonal surfaces of concrete

Excavating in post holes each not exc 0.5 Cum in soft/loose of soil, getting out, returning fillimg in and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm thick watering and well ramming and removing surplus soil to a distance n, exc 50m and making good surface.

M&L for plain cement concrete 1:3:6 type C-2 (using 40mm graded aggregate) as in foundation of posts and struts.

Fixing only Mild steel work as in gates, posts and struts in fencing including cutting tops to shape as directed drilling holes notching for wire etc flat iron fillets (for securing wire mesh etc) incl all necessary drilling, bolting or reveting etc., confirming to Fe290 gde E-165

Supply only chain link MS galvanised fencing, fixing to steel fencing post straining bolts etc complete all as specified and directed by Engr-in-charge.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire etc complete all as specified and directed by Engr-in-charge.

S&F Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, incl, securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured).

M&L painting with synthetic enamel paint two coats including redoxide and preparing the new steel surfaces of any description over 10cm in width or girth.

S&F 10 mm thick toughened glass as in doors including 2 nos S/S handle minimum 450mm long suported on floor spring and pivot hinges with necessary locking arrangement with complete accessories.

S&F PVC septic tank having capacity 3000 litre designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for 30 Users.

M&L Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.2 M dia X 4.5 M effective depth Drg No. BTD-804

Cutting into existing manhole for connecting new drain, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in PCC 1:2:4 type B1, smooth finished and reforming benching as required for internal pipe of dia 200 mm all as specified and directed.

Excavation in trenches, in any type of soil n exc 1.5 m width n exc 1.5 m in depth and getting out all as specified and directed.

S&F Reinforced concrete pipes, class NP2, 200 mm dia laid and jointed including complete demolition of pipes with collars all as specifed and directed.

M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) Concrete bed to 200 mm bore drain pipes including packing under and hauching & Benching against the sides of pipes after they are laid and tested all as specified and directed.

Returning, filling in including spreading, leveling watering and well ramming in layers n. exc 25 cm in soft/loose soil all as specified and directed.

Removing excavated soil to a distance n. exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point all as specified and directed.

M&L plastering 15mm thick in CM 1:4 on brick or concrete masonry walls, finished surfaces even and fair without using extra cement and using 2 % water proofing compound all as specified and directed. Note- (i) WPC shall be measured and paid for separately as 'Supply only'.

Supply only integral water proofing compound all as specified and directed..

M&L PCC (1:4:8), type C2 (using 40 mm graded crushed stone aggregate) in foundation filling and mass concrete for bottom of manhole all as specified and directed.

Taking down carefully to existing serviceable copper point wiring (light,fan, socket or power) complete including fittings such as switches, bellpushes, ceiling roses, pendents, regulators, sockets, light fitting, callbells etc removing materials to E/M store for keeping in safe custody and making good disturbed surfaces of walls, floors etc. complete all as specified and directed.

M & L for point wiring for one light / fan point controlled by one switch with 2.5 Sqmm PVC insulated, unsheathed multi strand copper conductor cable FR-LSH in and including concealed PVC conduit 20 mm dia heavy duty ISI marked, steel terminal sunken boxes and 3 mm thick phenolic laminated sheet top cover for sunken boxes flush to surface for one light point/fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 2.5 Sqmm copper conductor cable FR-LSH connected to common earth dolly complete including cutting, chasing the surface and then making good the same in CM (1:3) complete all as specified and directed by Engineer-in-charge.(Note :- Switches, sockets etc shall be measured and paid for separately under respective items of Schedule).

One light/fan point controlled by one way 6 amps switches complete all as specified and directed.

One 3 pin socket outlet 6 Amp on same board point, complete all as specified and directed

One 3 pin socket outlet 6 amp on the independent board point complete all as specified and directed

All as per srl item No. 2.00 (here-in-before) but for 15/16 Amp socket out let by using 2.5 Sqmm PVC insulated unsheathed copper conductor cable FR-LSH multi strand on independent board including provn of 2.5 Sqmm unsheathed, multi stranded copper conductor cable FR-LSH continues as earth wire connected to earth dolly etc complete in existing conduit all as specified and directed

Note for serial item No 93 to 97:- 1. Switch(es) & socket(s) shall be measured & paid for separately under respective item of Schedule 'A'. 2. GI boxes/ Modular flush box shall be fixed flush in position with cement mortar (1:4) complete all as directed. 3. Taking down old /unserviceable fitting and ficture will be deposit to the AGE E/M Store of GE (south) Bathinda

S & F Modular switch 1 way 6A/10A 1 module single pole complete all as specified and directed.

S & F Modular switch 1 way 16A, 1 module single pole complete all as specified and directed.

S & F Modular Socket oultet 6A - 2/3 pin combined 2 module, 230 volt, multipurpose, complete all as specified.

S & F of Modular Socket outlet 6A/16A - 2/3 pin combined 2 module, 230 volt,multipurpose, complete all as specified.

S & F Modular Fan step regulator, 120W - 2 module with 5 steps type complete all as specified.

S & F Lamp Holder PVC/polycarbonate type with back plate complete all as specified.

Taking down old unserviceable and Supply and fixing in replacement of 4 feet long LED tube light fittings, 22 Watt of cool white / warm comprising of batten with extruded aluminium housing enviromental friendly, energy efficient ready to use pack with all accessories internally prewired and connecting up with twin core twisted copper conductor cable of suitable size including taking down old fittings complete all as specified and as directed by the Engineer-in-Charge.

Taking down old unserviceable and Supply and fixing of Bed side lamp wall mounted with provn of holder lamp 5 watt 220V AC, efficacy not less than 90 lumen/watt with high efficiency PMMA diffusor soft glare free light complete and integrated inbuilt driver, holders, LED lamps etc including making connection complete all specified and directed

Taking down old complete and Supply and fixing of 9 watt LED Bulb suitable for B-22 type holder complete all as specified and directed by Engineer-in-charge.

Taking down old unserviceable of any type complete and Supply and fixing of Building Security light LED type of capacity 35 W comprising with Pressure die cast aluminium housing IP 66 protection with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size including bracket made of 40mm dia GI light grade pipe of 1.2m long bent to shape fixed with suitable MS clamps, bolts, nuts and washers duly painted complete all as specified and as directed

S&F in replacement sub main two single core PVC copper conductor unsheathed wire multi stranded 4 sqmm along with earth wire 4.0 sqmm copper conductor single core wire connected by common earth in existing surface/recessed PVC/steel conduit complete all as specified. Note:- (i) 2 run of 4.0 Sqmm main cable, one run of 4.0 Sqmm earth wire shall be considered as one running length. (ii) The wiring shall be done in proper color coding using Red,Yellow, Blue for phases, Black for neutral and Green for earth.

S&F in replacement sub main two single core PVC copper conductor unsheathed wire multi stranded 10 sqmm along with earth wire 10.0 sqmm copper conductor single core wire connected by common earth in existing surface/recessed PVC/steel conduit complete all as specified. Note:- (i) 2 run of 10.0 Sqmm main cable, one run of 10.0 Sqmm earth wire shall be considered as one running length. (ii) The wiring shall be done in proper color coding using Red,Yellow, Blue for phases, Black for neutral and Green for earth.

Taking down old complete and Supply and fixing of Vertical TPN MCCB DB 04 Way and provision MCCB as incomer,,double door, AC, 440 volt, with 200 Amp rated copper bus bar , sheet metal enclosure completer with IP 54 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and as directed .

S&F in replacement sheet metal encloser double door 12 way SPN 240V ISI marked complete with neutral and earth link and bus bar complete made out of CRCA steel sheet Factory made including blanking plate for unused module complete all as specified and directed

Taking down old complete and supply and fixing of SP MCB 6-32 Amp ,240Volt 10 KA ‘C’ series complete all as specified and directed.

Taking down old complete and supply and fixing of SPN MCB 40-63 Amp ,240Volt 10 KA ‘C’ series complete all as specified and directed.

Taking down old complete and supply and fixing of TPN MCB 25-63 Amp ,415 Volt 16 KA ‘C’ series complete all as specified and directed.

Taking down old complete and supply and fixing of MCCB 4 Pole, 100 Amps, 50 Hz, 35/36KA, 415 Volts,adjustable thermal and fixed magnetic type with all necessary aluminium lugs and glands, including suitable MCCB enclosure fixed with wall etc complete all as spicified and directed.

Taking down old complete and supply and fixing of SPN enclosure with a two pin and earth plug and socket complete with and including MCB, SP, AC, 240 volt of 20 Amp, 'C' curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

Taking down old complete and M&L labour for earthing complete with galvanised mild steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level steel earth plate connected with GI wire 04 mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15 mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150 mm thick around GI earth plate, GI pipe medium grade 20 mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40 mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6 mm dia at the rate of 75 mm centre to centre both way with 12 mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40 mm x 40 mm x 3 mm frame for pit cover including testing on completion complete all as specified and directed.

BALAJI CONSTRUCTIONS (BID ID -3301836)

M/s Kamal Constructions (BID ID -3302769)

FATEH ENTERPRISES (BID ID -3302975)

RAMA AUTOS (BID ID -3302881)

RINKU BROTHERS (BID ID -3303012)

M K Enterprises (BID ID -3303088)

Easyways Enterprises (BID ID -3302218)

ANANT ENTERPRISES (BID ID -3302006)

M/s Balvinder Singh Engineer and Contractors (BID ID -3303058)