Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.3 LAccepted-Finance | ₹6.3 L | L1 | Accepted-Finance due to lowest 1 st |
| 2 | L2₹7.2 L+₹86,944.60 (13.8%)Accepted-Finance | ₹7.2 L+₹86,944.60 (13.8%) | L2 | Accepted-Finance due to lowest 2 nd |
| 3 | L3₹7.6 L+₹1.3 L (21.3%)Accepted-Finance | ₹7.6 L+₹1.3 L (21.3%) | L3 | Accepted-Finance due to lowest 3rd |
| 4 | L4₹9.5 L+₹3.2 L (50.5%)Accepted-Finance | ₹9.5 L+₹3.2 L (50.5%) | L4 | Accepted-Finance due to lowest 4th |
Tender Value
₹9.4 L
EMD Value
₹18,860
Closing Date
14 Aug 2026, 6:00 pmClosed
Commissioner
Municipal board mount abu
Providing and Fixing of LED Street Light in Municipal Area at Mount Abu
2026_DLB_583955_1
3098-3100 (1)
Open Tender
Electrical Works
Percentage
15 days
Municipal board mount abu
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
Yes
Commissioner
₹18,860
Yes
19 Aug 2026
7 Aug 2026
15 Aug 2026
7 Aug 2026
14 Aug 2026
7 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing & Fixing of IK08, IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with UV stabilized PC (UV stablization
report submitted for UV cover ) /Toughened Glass cover and secondary lens on each LED & should be SMD type of 3 to 5 watt each . The System efficacy >=125 lm/ wt and potted driver & has a unique BIS R number with Input Voltage AC 120 to 270 V AC with
High voltage Cutoff @>=300 V AC and Auto resetting Safety , Power Factor >0.95 driver Efficiency >85% ,THD(I) <10% Humidity 10% to 90% RH Working Temp -5C to 45C . driver current <750mA. The luminaire shall be BIS certified and Trade mark certified. Life
Expectancy Equal or more than 50000 burning hrs with Minimum 70% lumen maintened , CRI >70 and CCT 5700K +355K. Surge protection shall be min ≥ 4 KV internal and min 10 KV external inside driver compartment. driver should be Phase to phase protection of 440 V for 4 Hrs. Manufactures Word Mark/Name Engraved/Embossing on die cast housing to allow traceability/authenticity. Fixture shall be AS PER IS 10322
Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure
"A" attached with this BSR . LED Street Light fixture with Minimum lumen output 3700 lm | 150 | each | 3,454 | ₹5,18,100 |
| 2 | LED Street Light fixture with Minimum lumen output 5600 lm | 100 | each | 4,249 | ₹4,24,900 |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.75 MB
BOQ_1037192.xls
BOQ • 0.23 MB
corrigendum.pdf
PDF • 0.16 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .