SPL REPAIR OF ROAD FROM TAJ VIEW TO AGRA FORT JUNCTION (GENERAL CARIAPPA ROAD) AT AGRA CANTT UNDER GE (EAST) AGRA

Amount

Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed.

M&L for preparing of black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with broom & finally fanning the cleaned surfaces with gunny bag to remove all loose dirt etc complete all as specified and directed.

M&L for applying evenly a priming/tack coat with mechanical sprayer over WBM / WMM surfaces with bituminous primer (VG-10) at 10kg per 10 sq metre complete all as specified and directed.

M&L for applying evenly a priming/tack coat with mechanical sprayer over old black top surfaces with bituminous primer (VG-10) at 5kg per 10 sq metre complete all as specified and directed.

M&L for premixed bituminous macadam using paving bitumen of VG-30 grade with binder content 4% by weight of total mix and compacted to required gradient and camber laid by mechanical paver (consolidated thickness 50 mm or less) with 8 to 10 tonne power vibrator road roller etc complete all as specified and directed. Note :- (a) Premix concrete shall be mixed in hot mix plant by using design mix and transported from plant to work site and laid / spread by means of mechanical paver. (b) Contractor shall quote his rate on this basis as metioned in baove item if there is any vatiation in the actual binder content used, the rate shall be adjusted lowerside of binder used however no price adjustment shall be made of the binder content percentage is more as specified above.

Material & Labour for 30 mm thick (consolidated average thickness) bituminous premix asphaltic semi dense concerete with 5.5% % binder (of paving bitumen VG-30) content by weight of total mix, rolled & compacted with 08 to 10 tonne power road roller to required camber and gradient complete all as specified and directed (Laying of bituminous premix asphaltic semi dense concrete with mechanical paver) complete all as specified and directed. Note :- (a) Premix concrete shall be mixed in hot mix plant by using design mix and transported from plant to work site and laid / spread by means of mechanical paver. (b) Contractor shall quote his rate on this basis as metioned in baove item if there is any vatiation in the actual binder content used, the rate shall be adjusted lowerside of binder used however no price adjustment shall be made of the binder content percentage is more as specified above.

M&L for preparation of road surface and applying thermoplastic reflective paint for marking of minium 2.5 mm thick single coat as a centre line or edge line etc road marking of 150/100 mm width using 'HOT MARK' thermo plastic paint (Hot application white/yellow by indenous modern propelled road marking machine as directed including all ingredients such as binder, glass beads, titanium dioxide, calcium carbonate, inter filler etc, thermoplastic requirement for glass beads shall be conforming to BS-6086 & MORTH specification including spraying of glass beads etc complete all as per manufactures instructions and as directed by Engineer incharge

Supply and fix in repair solar cat eye aluminum alloy shall (100% water proofing design) according to IP 67 of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono crystalline solar panel 2.4V/ 0.3 watt one Ni-mh or NI-cd rechargeable battery (1.2V/ 1600MA) consisting of 06 Nos super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed. Make DA-110(Dhruv) of dark eye or in equivalent makes listed in Appx 'B'.

M/s J S & SONS (BID ID -3171692)

M/S SUNNY ASSOCIATE (BID ID -3171897)

M/s M S Sharma and Co. (BID ID -3171610)

Gupta Automobiles (BID ID -3171370)