Repair to roof treatment, flooring, joinery and other misc work including internal electrification to OTM and MD Accn in Zone A2 Area under GE (West) Mathura

Amount

Taking down chowkhats with shutter (without taking off shutters from the frame) area n.exc. 1.50 Sqm each complete all as specified and directed.

Taking down chowkhats with shutter (without taking off shutters from the frame) area exc. 1.50 Sqm but n.exc 4 sqm each complete all as specified and directed.

Taking down shutter only of any description exc 1 sqm but n. exc 2 sqm each complete all as specified and directed.

S&F Pressed steel frame made out of MS Sheet 1.25mm thick for doors of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and directed. Note:- During fixing of chowkhat, surface shall be make good in plumb with existing finishies like cement plaster simlar wall tiles, floor tiles etc as per site requirement.

S&F Pressed steel frame made out of MS Sheet 1.25mm thick for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and directed. Note:- During fixing of chowkhat, surface shall be make good in plumb with existing finishies like cement plaster simlar wall tiles, floor tiles etc as per site requirement.

M&L for PCC (1:3:6) type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame complete all as specified and as directed.

S&F 35mm thick plain framed panelled door shutter, factory made (any number of panels) of 2nd class hard wood with lock rail and panels of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces including 2nd class hard wood kail beading 20mm wide tapering from 10mm to 5 mm on one side of shutter & fitted to chowkhats. The size of rail and style shall be as per IS –1003 (Part-I) (wood shall be kiln seasoned and chemically pressure treated) complete all as specified and directed.

S&F for factory made fully glazed/wire gauge (single piece both side ) PVC prelam door shutter 33-35mm thick (style) consisting of frame made out of mild steel tubes of size 19x19mm (19 gauge) in style. Single piece PVC prelaminated coloured PVC sheet 5mm thick to be used to cover styles and rails. PVC sheet strip of 20mm width stuck inside width solvent cement for stiles and plain colour PVC sheet for top rail. Pannel will wire gauge and tighten firmly and fitted as manufacturer instruction including stainless steel wire cloth 0.25mm to 0.36mm nominal dia of wire and average width of aperture 1.4mm to 2mm and aluminium XPM in rhombus shape 1.5mm dia and aperature 18mm (± 1mm), in one piece from top rail to bottom rail as specified and directed Note: All screw shall be self tapping chromium plated”.

S&F in repair 18 mm thick Alstone Hybrid Water Proofing Board in cupboard shutter with decorative on one side & other side balancing white fixed by drilling screws complete all as specified and directed.

S&F Continuous (piano) hinges 40 mm, mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fixed in opening as per specification and drg in SSR Part II 2010 complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with particle board core and 2,4 or 6 raised panel design with 5mm thick Moulded PVC Sheet on the front Face & 2mm Plain colour PVC sheet on back face, fixing in frame at site complete specification & drawing as per SSR.

S&F for factory made window/ventilator steel rolled framed section of 1 to 1.25mm thick made of galvanized steel, box type hollow , Hollow P Sec incl grill made of 10mm Sq MS bars welded to 12mm x 6mm, MS flat @ 150mm c/c. Grill shall be welded to window frame. The complete unit Ref TD/2013/01 sheet 1/3 to 3/3 shall be a shop coat of zink chromate primer including the following :-. (a) Fly proof shutter shall provided with stainless steel 32mm gauge fly mesh of 304 Gde FE with 144 holes per square mesh. Glazed shutter and fixed glass portion shall be provided with glass of 4mm thick float glass. (b) Window frame shall be fixed to brick wall with by cutting holes and made good dismantled portion in PCC (1:2:4) type B1 four Nos hold fast block for each window/ventilator :- (i) Hold fast 150mm long of 20x3mm MS flat made to shape 4 Nos per window. (ii) Handle of Z Sec 20mm x 25mm, 100mm long – 1 No per leaf. (iii) Mild Steel tower bolt 150mm long - 02 Nos per leaf. (iv) Z Section 20mm x 25mm, 100mm long stopper - 1 No per leaf.

(v) Cleat 55 mm long of hollow square 15 x 20 x 63mm welded to hinge 01 No per leaf. (vi) MS pintle hinges size 75 x 12 mm 02 Nos per leaf. NOTE : During Fixing of Window, Surface shall be make good in plumb with existing finishes like cement plaster complete all as specified and directed.

S&F 150mm long stainless steel anchor bolt of 12mm dia with fasterner complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description not otherwise described exc 10 cm width or girth and applying two coats of synthetic enamels paints over a coat of pink primer complete all as specified & directed..

S&F 150 mm MS ordinary rat tail rod pattern spring including roller & roller plate complete all as specified and directed.

S&F 100mm long stainless steel Butt hinges fixed complete all as specified and directed.

S&F 200mm stainless steel barrel tower bolts with bright bolt and fixed complete all as specified and directed.

S&F 150mm long stainless steel handles, oval type complete all as specified and directed.

S&F 300mm stainless steel sliding door bolts, bolt type with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F 100mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F snake guard made of aluminium/MS colour coated 40mm wide with nails to cover the gaps between door and floor and similar places complete all as specified and directed.

S&F 150mm Anodised aluminium barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F Anodised aluminium 150mm handles, cast type complete all as specified and directed.

Demolition of brick work or stone/boulders masonary, built in cement mortor including all quoins, arches pillars, etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brickwork with fly ash (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar (1:6).complete all as specified and directed.

All as per item No 27.00 (here-in-before) but except bricks.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM in (1:4) finished fair and even complete all as specified and directed.

M&L for rendering 10 mm thick in CM (1:6) on brick or concrete surface on other than fair faces of brick complete all as specified and directed.

M&L for rendering 5mm thick on fair faces of brick work or concrete surfaces of ceiling in cement mortar (1:3) complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of cement based paint over one coat of cement primer on walls complete all as specified and directed.

M&L preparation of new plastered surfaces and applying two coats of OBD over one coat of primer on walls complete all as specified and directed.

M&L for preparation newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

S&F stainless steel kitchen plate rack overall size 900mmX900mmx200mm made out of 0.8 mm thick stainless steel sheet etc complete all as specified and directed.

Taking down existing aluminium door shutter of any size, setting a side and change the Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed and refixing of aluminium door in same position complete all as specified and directed.

S&F in repair door closer hydraulically regulated designation No.3 universal type of Aluminium (Die cast body) suitable for door shutters of 851 to 1000mm in width and fixed complete all as specified and directed.

Dismantling asbestos cement/GI/PGI corrugated or semi corrugated sheets in roof covering including ridge complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strenght of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strenght of 550 Mpa as in roof covering / clading to wall fixed with self tapping screws complete all as specified and directed.

S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets fixed with L-type or J-type or cranked hook bolts and washer in roofs, walls etc complete all as specified and directed.

All as per item No 42.00 (here-in-before) but except sheets.

S&F 6mm thick Asbestos cement two piece adjustable serrated ridge fixed with L-type or J-type or cranked hook bolts and washer for corrugated or semi corrugated sheets complete all as specified and as directed.

Dismantling of ceiling boards of any type and any thickness including cover fillets complete all as specified and directed.

M&L for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylone sleeves and screws at 450mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasterners with and including ceiling section ( not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre, size of grid 605mm x 605mm including providing and fixing designer decorative Gypsum board 4mm thick complete all as specified and directed.

Dismantling structural steel work of any description and in any position complete all as specified and directed.

S&F mild steel flat iron as in hold fasts, wind ties etc and similar small work confirming to Fe-290 Gde E-165 complete all as specified and directed.

Demolition of cement concrete ( unreinforced ) in ground floors and pavings not exceeding 15 cm thick above or below ground level complete all as specified and as directed.

M&L for cement concrete type B0, (1:2:4) (using 12.5mm graded stone aggregate) as in benching/coping and the like including weathering slightly round or chamfered angles and throating complete all as specified and directed.

M&L for 75mm thick cement concrete type C-2, (1:3:6) using 40mm graded stone aggregate as plinth protection and finished surface even and smooth without using extra cement complete all as specified and directed.

Dismantiling floor, hearth or wall tiling including cement motar bedding ( but not backing ) removing serviceable tiles to store and rubbish off the premishes complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 15mm thick screed bed in cement mortar (1:4) for laying floor finishes. complete all as specified and as directed.

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but n.exc 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 15mm thick screed bed in cement mortar (1:4) for laying floor finishes. complete all as specified and as directed.

M&L for glazed ceramic coloured tiles in vertical surface 450x300x7-8mm thick set and jointed in neat cement slurry and pointed in coloured cement to match fixed over and including 15mm thick rendering on brick work/concrete surfaces in cement mortar (1:4) for skirting /dado finishes complete all as specified and as directed.

Dismantling brick/concrete tiles any size etc including existing roof treatment of any thickness complete all as specified and directed.

M&L for PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate as in padding over roof finished and laid to required slope complete all as specified and as directed.

M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed.

M&L for brushing neat cement slurry with 3.0 kg of cement per sq. metre complete all as specified and directed.

M&L for preparing cement concrete surface and providing 10mm thick modified plaster in CM (1:4) mixed with polymer in ratio 1:10 (1 part of polymer and 10 part of cement) and applying a coat of epoxy primer with resin and hardner with water dilution as per manufacturers instructions including applying two coats of polyethelene liquid membrane each coat not less than 500 micron thick UV stable having SRI value equal or grater than 105 with consumption of 0.61 Kg/Sqm (each coat) and second coat should be applied once the first coat is fully dried complete all as specified and directed.

S&F precast hydraulically pressed PCC tiles of size 25cm x 25cm x 20mm thick laid over and including screed bed 15mm thick in CM (1:4) set and jointed in neat cement slurry and pointed in CM (1:3) mixed with WPC of approved make in screed bed and pointing on roof complete all as specified and directed.

Taking down steel tubing and connections 20mm bore tube complete all as specified and directed.

S&F GI tubes medium grade, with all fittings and fixed complete to wall and ceiling/floor 20mm bore complete all as specified and directed.

Taking down steel tubing and connections 50mm bore tube complete all as specified and directed.

S&F GI tubes medium grade, with all fittings and fixed complete to wall and ceiling/floor 50mm bore complete all as specified and directed.

S&F in repair 50mm GI Elbow complete all as specified and directed.

S&F in repair 20mm GI Union complete all as specified and directed.

S&F in repair 20mm GI Elbow complete all as specified and directed.

S&F in repairs 20 mm GI nipple fully threaded with two numbers check nuts and washers for PVC tank, 100mm long to PVC tank with back nut and washers for inlet and outlet pipe complete all as specified and directed.

S&F sheet glass ordinary quality 3mm thick and glazing with oil putty or wdn beads in shape n.exc 0.50 Sqm in each pane including hacking out glass complete all as specified and directed.

Ms Kamal Kant Agarwal

B S ENTERPRISES

M/s Hoti Lal Contractor

M/s Kartar Singh Construction Co.

R N AGRAWAL