(Mahapor Nidhi) Construction at Shankar Chauk Lalitpur Colony Renovation Work Ward No.45 Zone No.12.File No. 41/26X3/3.

Earthwork in excavation mechanical means (Hydraulic excavator) / manual means in foundation trenches ordrains (not exceeding 1.5 m in width or 10 Sqm on plan)including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed,with in a lead of 50 m.

2.3 Dismantling of existing structures by manual means comprising of masonry, cement concrete,woodwork, steel work, includingT&Pand scaffoldingwherevernecessary,sortingthedismantledmaterial,disposal of unserviceablematerial andstacking theserviceablematerialwithall liftsandleadupto1000meterandasperrelevantclausesofsection-200 in

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.All work up to plinth level.cement concrete grade M-10 (Nominal mix) with 40mm maximum size of stone aggregate.

Random rubble masonry with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying in position specified grade of reinforced cement concrete excluding centering, shuttering , finishing and reinforcement -All work up to plinth level : cement concrete grade M-20 (Nominal mix) with 20mm maximum size of stone aggregate

Centering and shuttering including strutting, propping etc.and removal of form for Foundations, footings, bases of columns, etc. For mass concrete.

Lintels, beams, plinth beams, girders, bressumers and cantilevers. Plinth Beam For outer perpheri walls

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/ inclined position of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of IS : 13920; IS 456 & SP : 34) etc. complete. Thermo-Mechanically Treated bars. (Fe 500 D or more)

Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894- 2002, class designation 50 (average compressive strength) in superstructure above plinth level up to floor 2 level including the cost of scaffolding : : Cement mortar 1:6 (1 cement : 6 coarse sand)

12 mm cement plaster of mix : 1:6 (1 cement: 6 sand)

Providing and fixing 16mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen plat forms, vanity counters, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarses and) with joint streated with white cement, mixed with matching pigment, epoxy touchups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc.complete at all levels

Marble work gang saw cut (polished and machine cut)of thickness 16mm for wall lining (veneer work) in cement mortar 1:3 (1 cement : 3 coarse sand) including pointing with white cement mortar 1:2 (1 white cement:2 marble dust) with an admixture of pigment to match the marble shade:(To be secured to the backing by means of cramps, which shall be paid for separately). Makrana Marble. Area of slab upto 0.50 sqm

Extra for providing full edge moulding to 16mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer- in- Charge. Marble work

Granite work.

Supplying and filling in plinth under floors including, watering, ramming consolidating and dressing complete. Crusher Stone Dust Pathway

Providing and laying 80mm thick factory made cement concrete interlocking paver block of M -40 grade made by block making machine with strong vibratory compaction and of approved size and design/ shape laid in required colour and pattern over and including 50mm thick compacted bed of stone dust sand, filling the joints with coarse sand etc. all complete as per the direction of Engineer-in-charge.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories and stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand) including the cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 cement : 3 fine sand) on exposed surfaces complete. Cement concrete grade M-15 (Nominal Mix) with 20 mm maximum size of stone aggregate Curve stone length

Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge and consisting of : (i) Ist layer of 22mm to 25mm thick Kota rough stone slab over a 25mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. (ii) 2nd layer of 25mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in ecommended proportions. (iii) Finishing top with stone aggregate of 10mm to 12mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer. (with 5 years guarantee) water surface proofing

Providing and fixing Glass mosaic tiles at finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design, fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge: Glass mosaic tiles

"B" Monoblock type pumping sets. 2 H.P.

Supplying of ISI Marked Direct On-Line Starters confirming to IS : 13947-4 with suitable over load relay range and contactor size, 415 V , 3 -Phase with two earthing terminals. 0.75 / 1.0 / 2.0 / 3.0 / 5.0 / 7.5 HP

Porviding,erecting, testing and commissioning solar street light system on 80 mm heavy duty galvanised iron pipe 6 meter hight with 30cm x 30cm x 2mm base plate installed own cement concrete padestal casing complete with solar panel, solar battery with charger,other accessories with control panel in weather proof pole box,solar fitting LED type or CFL type 18 watt to 20 watt (set of 2 nos.)

Supply of XLPE nsulated power cable (conforming IS-7098) 1100 Voltgrade /Heavy duty power cable conforming to IS1554-1100 Volts grade ,2core /3½ core /4core ISI MARKED with Alu. Stranded /solid conductor 10 Sq.mm.(XLPE)

16 Sq.mm.(XLPE)

Wiring for sub-mains with PVC insulated cable FR with copper multi strand conductor ISI marked in surface rigid steel ISI marked conduit of suitable size(conduit included) including connection painting etc ,as required as per specification 2.5 sq mm cable in 20 mm conduit 2 WIRE SUB MAIN

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. External work 32 mm nominal outer dia .Pipes.

40 mm nominal outer dia .Pipes.

50 mm nominal outer dia .Pipes.

Providing, laying, jointing & testing of following P.V.C. pipes with solvent cement joint for 6, 8 and 10 kg/ sq. cm. pressures including testing of joints, cost of jointing materials etc. complete in all respect.

sculpture

Please Enable Macros to View BoQ information