REPAIR OF PLUMBING SANITARY, JOINERY, EXTRENAL PLASTERING, ROOF TREATMENT, MISC REPAIR AND PETTY REPAIR FOR DAY TO DAY SERVICES AT DHAR ROAD UNDER GE ARMY DHAR ROAD UDHAMPUR

Amount

M&L for 50 mm thick in Plain cement concrete type C1 ( 1:3:6)( using 20 mm graded aggregate ) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) finished even and smooth at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight incl Demolition of cement concrete (un-reinforced) in ground floor and in paving not exceeding 15 cm thickness ( below or above ground level) complete all as directed at site.

M&L for providing cement concrete Type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate) as nominal mix in lintels upto 1.5m clear span, cills, steps, parapets, copings, bed plates, and the like including weathering, slightly rounded or chamfered angles and throating, as directed including use of form work etc incl Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for.

M&L RCC nominal Mix as in supported on walls, beam and columns in floors, roofs , landings, balconies, canopies, deck slabs and in shelves and the like Type B1 1:2:4 (20mm graded aggregate) incl dismantling of old RCC slab complete all as specified and directed

M&L 18- 20 mm thick for Granite (Z Black) work (table rubbed and polished) in steps, jambs,pillars, window-cills, cooking plat-forms and like in cement mortar (1:4) incl pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite incl screed bed or bedding layer of mortar 20mm thick in cement mortar 1: 4 for laying floor finishes incl dismantling of old granite slab complete all as specified

M&L for machine cut kota stone slab 18-20 mm thick over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl screed bed or bedding layer of mortar 20mm thick in cement mortar 1: 4 for laying floor finishes incl dismantling of old kota stone slab complete all as specified..

M&L for machine cut kota stone slab 15-16 mm thick in riser of steps, skirting,dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl 10mm thick rendering in CM (1:4) backing of wall tiles such as dado/skirting invertical surface incl dismantling of old kota stone slab complete all as specified and as specified.

M&L for Glazed cermic coloured tiles 300x450x 7mm thick on vertical surfaces of wall set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick rendering in CM (1:4) backing of wall tiles such as dado/skirting in vertical surface including dismantling of existing old wall tiles complete all as specified and as specified.

M&L for Non skid ceramic coloured ceramic tiles 7 to 8mm thick (squqare/ rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:4) including dismantling of existing old floor tilescomplete all as specified.

M&L Non skid ceramic tiles 7-8mm thick in floors area exc.0.11sqm and not exc.0.18 sqm set and jointed in neat cement slurry and pointed in coloured cement to match colored tiles incl over 15mm thick screed bed or bedding layer of CM (1: 4) for laying floor finishes including dismantling of existing old floor tiles all as specified and directed.

M&L Non skid ceramic tiles 7-8mm thick in floors area exc.0.11sqm and not exc.0.18 sqm on vertical surfaces such as skirting/dados etc, set and jointed in neat cement slurry and pointed in coloured cement to match colored tiles incl over 10mm thick in CM (1:4) on brick or concrete surfaces of finished rough to receive the tiles including dismantling of existing old wall tiles all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each complete all as specified

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each complete.

Taking down shutters of any description exceeding 1 Square metre and not exceeding 2 Square metre each complete.

Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each and re fixing in same opening

Factory made, 2nd class hard wood,35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass / gauge etc. (without sash bars) edges or framing plain, chamfered or rounded fitted with cut or mitered beads and with mullinas for securing glass etc. size of members of shutters as specified in SSR Part - I section 8.20 (a), all as specified and directed by Engr-in-Charge.

Factory made, 35mm thick 2nd class hard wood, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side sflush shutters 35 mm thick complete, all as specified and directed by Engr-in-Charge.

S&F 2nd class hardwood as small fittings n exc 200cu cm each such as brackets of any type , latch and hinge blocks, shaped door and window stops and the like incl, all necessary labours and butt hinge of size 40mm complete all as specified as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame made out of mild steel tubes for top and bottom rails . Mild steel frame shall be covered with heat moulded plain cover PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and gap insert for top rail and bottom rail ; Paneling of plain colour PVC sheet to be fitted in the mild steel frame welded /sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement supplying and fixing in the frame at site as per specification clause No 8B.1 to 8B.10 and drawing on page No 146 of MES SSR-2010 Part-II.

Providing Kitchen cabinet shutter/Partation/Shelves in required size at site made out of 18mm thick MDF board one side decorative lamination PVC sheet complete all required etc. The panels shall be fabricated using adhesive and secure as required. All edges shall be covered with 2mm thick edge bonding taps or 90⁰ edge bent finish as per manufacturers instructions incl dismantling of old boarding, complete all as specified and directed

S&F cotinuous (piano) hinges brass , width of flaps when open in 40mm

S&F Steel Magnetic door Catehcer for cupboard/cabinet/wardrobe shutters including necessary arrangement comlete all as speciffied and directed.

S&F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specification and drawing on Page No 150 MES SSR-2004 Part-II and as directed by the Engr- in-Charge.

S&F Pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate incl filling hollow of frame with plain cement concrete type B0 (1:3:6 )(using 12.5mm graded aggregate ,etc complete all as specified as directed.

S&F Pressed steel frames of size 105x60mm, made of 1.25mm thick sheet, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, incl filling hollow of frame with plain cement concrete type B0 (1:3:6 )(using 12.5mm graded aggregate etc complete all as specified as directed

S&F Steel windows made up of box steel section of 16 gauge ms sheet ub outer frame, shutter farame and centre frame with outer side glazed shutter and inner side wire mesh shutter fixed as shwon in drg consisting with two nos pintol hinges 100 mm long, two nos stove enemaled tower bolts 150 mm long and one no steel handle, deovitailed are welded each panelan complete with necessary cleats and stopers all as specified as directed.

Steel ventilator made up of box steel section of 16 gauge MS Sheet frame, partly fixed and partly openable with outer glazed shutter and inner side wire gauge shutter consisting with 2 Nos pintos hinges 100mm long 2 Nos stove enamelled tower bolt 150mm long and 1 Nos steel handle dovetailed or welded with each shutter complete with necessary cleat and stopper complete all as specified and directed (MS Gaurd bar/grill work will be measured and separately.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins or spring clips and providing and fixing new clips or pins, all as specified.

S&F sheet glass ordinary quality and glazing with oil putty in square n. exc 0.50 Sqm in each pane 3mm thick all as specified incl Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins or spring clips and providing and fixing new clips or pins, all as specified.

All as per item No 28 above but pin headed

S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and avg width of aparture 1.18mm complete all as specified and directed

All as per item No 30 above but fixed in repairs.

S&F aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt, all as specified .

S&F aluminium anodised barrel tower bolts of extruded section with 100 mm long bolt, all as specified .

S&F in repair MS sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, 250 mm long.

S&F Alu alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, 250 mm long.

S&F MS butt hinges 100mm long medium weight cold rolled mild steel etc

S&F 300mm long ordinary rat tail rod pattern spring incl roller and plate complete all as specified

S&F aluminium handles cast type, anodised, 150 mm size complete

S&F aluminium handles cast type, anodised, 100 mm size complete

S&F 100mm long Hasp and staple aluminium anodised including bolt to hinge plate and fixed with screws.

S&F in repair Tubular Towel rail 20mm dia, D type, 60cm long between flanges of brass chromium plated fixed with and including chromium plated brass screws and wooden / plastic cleats all as specified.

S&F rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails braces, etc, complete , drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) & hanging; also fastening and fixing complete Fe 410 Gde complete all as specified and directed.

S&F for Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe 290 Gde-E-165 all as specified .

Water proofing treatment to floor & vertical surfaces of sunken portion complete comprising the following: - (a) After demolition of floor & lime concrete etc. remove all loose particles along with existing water proofing treatment (any no. of layers) with wire brushes and cleaning the surfaces with water. (b) Brushing cement slurry with 1.2 kg of cement per square metre duly blended with & including water proofing compound. (c) 15 mm thick (Average thickness) plaster in cement mortar (1:3) mixed with WP compound on sunken surface including walls. The corner of sunken portion shall be rounded in concave shape and adequate slope shall be made during plastering to accommodate sump pipe and curing the sunken portion with water minimum for 48 Hrs by ponding. (d) Applying self adhesive type APP based polymeric membrane minimum weighing not less than 3.6 kg/ Sq. m and minimum 3 mm thick reinforced with polyester non-woven fabric (weight not less than 150 gm/Sq. m),(e) M&L for PCC 1:7 :12 for fillin of sunken portion after conceling all menbrane and sealing all joints to the entire with broken bats and light weight all as satisfaction of Engineer-in-Charge. MAKE: LAFARGE, TEXA, STP, BENGAL AQUAFLUX. lAFARGE, TEXA, STP, BENGAL AQUAFLUX.

M&L for Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM(1:4) incl Dimolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified.

M&L for Brickwork with subclass `B' bricks, straight or curved on plan to any radius in half thick brick built in CM(1:4) incl Dimolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc.

M&L for 15 mm thick cement plaster in cement mortar 1:6 on brick or concrete surface etc. on wall finished even and smooth without using extra cement, all as specified .

M&L for 10mm thick cement plaster on brick or concrete surfaces, as in ceiling / facia / chajja etc. in cement mortar 1:3 finished even and smooth without using extra cement, all as specified .

M&L for 15 mm thick rendering on fair faces of brick work or cement concrete surfaces in cement mortar 1:4, finished fair and even without using extra cement incl mixing of water proofing compound complete all as specified. (Note: Water Proofing compound shall be measured and paid for separately)

M&L Three coats of white wash on newly plastered surfaces of ceilings including preparation complete all as specified.

M&L Two coats of oil bound distemper on newly plastered wall surfaces over a coat of alkali resistant primer including preparation complete all as specified and as directed.

M&L Two coats of cement base paint on newly plastered wall surfaces over a coat of alkali resistant primer including preparation complete all as specified and as directed.

M&L Two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of new steel surfaces of any description, over 10 cms in width or girth not otherwise described

M&L Two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surfaces of any description, over 10 cms in width or girth not otherwise described

Taking up or down steel tubing with connections for cleaning for refixing or removing to store yard complete of bore 15mm, all as specified .

Taking up or down steel tubing with connections for cleaning for refixing or removing to store yard complete of bore 20mm, all as specified .

S&F 15mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings all as specified.

Ditto all as item No 58 above but fixing only

S&F 20 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings

Ditto all as item No 60 but fixing only

S&F in repair Bib taps,long body, fancy type,chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm, all as specified.

S&F in repair Angle valves fancy type, chromium plated, cast copper alloy, with long shank and cup screwed for iron pipe or for unions of bore dia 15mm and fixed, all as specified.

S&F in repair Stop valves fancy type, chromium plated for iron pipe or for unions of bore dia 15mm and fixed, all as specified.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm long

S&F in repair Gun metal globe or gate valves, with iron wheel head screwed both ends for iron pipe of 20 mm dia, all as specified and directed

S&F in repair 15mm bore Brass chromium plated shower rose with arm 200 mm size with or without swivel joints, any size incl fixing to steel pipe or union complete all as specified.

S&F in repair Vitreous china squatting pan of pattern Orissa Pattern size 580x 440 mm white with ‘P’ or ‘S’ trap , front or back inlet but excluding flushing cistern and flush pipe fixed in repair including placing in position in floor and embedded in cushion of PCC 1:7:12 type E-1 and finishing the top surfaces to match with the existing flooring.complete all as specified and directed

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm boul size 405mm x 354m x 203mm, complete all as specified and directed

S&F in repair stainless steel Soap dish fixed to plugs chromium plated brass screws, all as specified.

S&F in repair PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete including taking down by dismantling the existing unserviceable cistern of any description.

S&F in repair Waste coupling, 32mm dia, of PTMT (half or full threaded) .complete all as specified.

S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement, 75mm diameter of outlet, all as specified.

S&F in repair PVC(SWR) pipes, 75 mm external dia single socketed in any length with rubber joints, fixed to walls/under floor with PVC brackets/clips including under floor will be coverd in PCC 1: 3:6 as complete all as specified.

S&F in repair PVC(SWR) pipes, 110 mm external dia single socketed in any length with rubber joints, fixed to walls/ under floor with PVC brackets/clips including under floor will be coverd in PCC 1: 3:6 as complete all as specified.

S&F in repair PVC(SWR) bends suitable for 110 mm external dia complete all as specified.

S&F in repair PVC (SWR) bends suitable for 75 mm external dia complete all as specified.

S&F in repair PVC (SWR) junction single, (single T) equal or unequal of 75mm dia

S&F in repair PVC (SWR) junction single, (single T) equal or unequal of 110mm dia

S&F in repair PVC (SWR) junction single, (double T) equal or unequal of 75mm dia

S&F in repair of vitreous china Wash basin white type of size 550x400 mm including CP waste fitting&waste pipe etc with sutiable fixing arrangement to wall including taking down old complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of Capacity 1000 litres including dismantling old RCC/PVC unsv water tank complete all as specified and directed .

S&F Ball valve, high pressure with PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or fixed of size 20 mm bore, fixed in repairs.(Min Wt 20mm- 210 gms).

S&F in repairs Ball valve, high pressure with PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or fixed of size 20 mm bore, fixed in repairs.(Min Wt 20mm- 210 gms).

S&F in repair CP grating round/Square 100 mm size with hole /with out hole, all as specified.

S&F in Repair PVC waste pipe 800mm long suitable for 32mm dia waste coupling complete all as specified.

BLANK

S&F PVC Coated decorative mild steel curtain rod of 25 mm dia with brackets both side of globe in repairs all as specified and directed by Engr-in-charge.

Supply only liquid water proofing compound

BLANK

Supply only liquid water proofing compound

S&F in repair aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt, all as specified .

S&F in repair aluminium anodised barrel tower bolts of extruded section with 100 mm long bolt, all as specified .

S&F in repair Alu alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, 250 mm long.

S&F in rapair 300mm long ordinary rat tail rod pattern spring incl roller and plate complete all as specified

S&F in repair MS butt hinges 100mm long medium weight cold rolled mild steel etc

S&F in repair aluminium handles cast type, anodised, 150 mm size complete

S&F in repair aluminium handles cast type, anodised, 100 mm size complete

S&F in repair 100mm long Hasp and staple aluminium anodised including bolt to hinge plate and fixed with screws.

M&L for Glazed cermic coloured tiles 300x450x 7mm thick on vertical surfaces of wall set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick rendering in CM (1:4) backing of wall tiles such as dado/skirting in vertical surface in demolition of old wall tiles complete all as specified and as specified.

M&L for rendering 10 mm thick in patches (not exc 3 Sqm each patch) in cement mortar 1:6 on other than fair face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement incl taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc.

M&L for 10mm thick cement plaster on brick or concrete surfaces, as in ceiling / facia / chajja etc. in cement mortar 1:3 finished even and smooth without using extra cementincl taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc.

M&L Three coats of white wash on newly plastered surfaces of ceilings including preparation complete all as specified.

M&L Two coats of oil bound distemper on newly plastered wall surfaces over a coat of alkali resistant primer including preparation complete all as specified and as directed.

Checking and attending to water leakage from taps, flushing cisterns, wash hand basins & other water supply fittings/fixtures and any obstruction to water supply in rooms, requiring plumber work and carryout minor repairs such as replacement of washers, check nuts, tightening of fittings of flushing cistern etc including petty materials like washers of all sizes, thread(soot), M-Seal, screws, nails to make water supply/plumbing lines functional and leak proof. Note: (i) Contractor or his authorised representative collect such type of complaints from B/R-I complaint cell at 8.30 AM on daily except Sunday & Holiday. No extra payment shall be made on account of collection of complaint. (ii) Complaints must be completed with in 24 hrs without any fail otherwise recovery shall be made double the market rate to the contractor.

Checking of joinery (wooden/steel) iron/aluminium mongery, pelmet box, door springs etc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, minor adjustment of joinery, door etc. including petty repairs material like screws/nails, plug etc. to make it functional. Note: (i) Contractor or his authorised representative collect such type of complaints from B/R-I complaint cell at 8.30 AM on daily except Sunday & Holiday. No extra payment shall be made on account of collection of complaint. (ii) Complaints must be completed with in 48 hrs without any fail otherwise recovery shall be made double the market rate to the contractor.

S&F in repair pillar tap, fancy type,chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm, all as specified.

S&F in repair Shelf of Corner glass shelf fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum wight 300 grms)complete all as specified.

S&F in repair Gun metal globe or gate valves, with iron wheel head screwed both ends for iron pipe of 15 mm dia, all as specified and directed

Add to item No 60&61 if provided with excess door

Add to item No 59&&62 if provided with excess door

S&F 500 litre capacity rotational moulded polyethylene water storage tank (cylindrical vertical double layered with closed top) duly provided with necessary fittings/ fixtures for connecting inlet, outlet, washout and overflow pipes; hoisted and fixed in position incl dismantling PVC water sotrage tanks of capacity more than 250 to 500 litres capacity complete all as specified and directed.

S&F in repair stainless steel peg set of six sutable size of length complete etc.

S&F in repair 20mm PTMT Nipple suitable for HDPE Water tank (Min Wt 15mm-38gms) complete.

S&F in repair 15mm PTMT Nipple suitable for HDPE Water tank (Min Wt 15mm-38gms) complete.

S&F in repair 100mm length door stopper of aluminium alloy body and tongue,anodised fixed to door complete all as specified.

M&L for repair of wooden door/cup board and similar wooden work (Using planer, shaper and chiselling with manual or electric tools) complete all as specified

M&L for repair of water supply line of 15mm (Only outlet from water tank) incl small fitting such as Elbow, Nipple, Tee, Reducer, Bend and Union of required size, complete all as specified

M&L for repair of water supply line of 20mm (Only outlet from water tank) incl small fitting such as Elbow, Nipple, Tee, Reducer, Bend and Union of required size, complete all as specified

S&F in repair door seal, complete all as specified

M&L for repair 15 mm dia brass spindal in existing Bib tap/piller tap/stop valve/ angle valve complete all as specified and as directed.

S&F for mirror cabinet PTMT of 450mm x 600 mm with megnetic looking arrangements fixed with and inclduling chromiplated brass screws and PVC rawl plugs complete all as specified and directed.

S&F in repair PVC flushiung cistern Kit for 10 ltr Capacity complete all as specified and directed

S&Fin repair stainless steel plate racks of size 750mm x 900 x 250mm and thickness of SS strip of n.exc 05mm fixed on wall etc complete all as specified.

S&F in repair for sink mixter with regular spout wall mountated with connectings legs & wall flanges and including all necessary fittings in repair make complete all as specified.

S&F in repair wall mixer with provision for overhead shower with 115 mmlong bend pipe on upper side,connecting legs & wall flanges complete all as specified.

S&F in repiar Brass CP centre hole mixer without pop up waste system 15mm bore for mixing hot & cold water screwed down for iron pipe for Wash Hand Basin complete all as specified and directed.

S&F Iin repair chromime plated, cast copper alloy jet spray with 1 mtr PVC type (for European seat) complete all as specified.

S&F in repair Health faucet brass chromium plated with 8mm dia 1.2 mtr long flexible pipe and wall hook fixed with brass chromium plated screws, complete all as specified.

S&F in repair plastic toilet seat cover of any colour for EWC complete all as specified and diredcted

Supply and fixing in repairs door closer hydraulically regulated, designation No. 3, aluminium (Die cast) body, universal type (ISI marked), complete all as specified & as directed.

S&F in repair toilet paper holder of stainless steel fixed to wall with CP brass screw all as specified.

Taking down carefully anodized aluminium door frame, Window and partition including glazed shutters & builder’s hardware complete of area exc 1.5 sqm and not exc 4 sqm each of any description and refixing in the same opening after carrying out necessary repair & replacement of unserviceable components / hardware ie rubber gasket, alu tower bolt, handles, butt hinges, hooks & eyes etc to make it fully functional complete all as specified & as directed.

Taking down carefully anodized aluminium door frame, Window and partition including glazed shutters & builder’s hardware complete of area n exc 1.5 sqm each of any description and refixing in the same opening after carrying out necessary repair & replacement of unserviceable components / hardware ie rubber gasket, alu tower bolt, handles, butt hinges, hooks & eyes etc to make it fully functional complete all as specified & as directed.

Supply and fixing in repair 0.56mm thick aluminum sheet fixed in repairs with nails to door shutters all as specified.

S&F in repair double action floor spring hydraulically regualated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

S&F in repair brass mortice lock, vertical type, size 100 mm 02 lever

S&F in repair ordinary/tint sheet glass 5 mm thick in panels of aluminium partition and doors etc fixed with aluminium glazing clips and rubber bedding complete all as specified and directed

One piece closet with bowl for cupled WC with PP soft seat cover, hinges fixing accessories and accessories set of size 360mmx640mmx685mm, strap 110mm cistern with cistern fittings and necessary fixing fittings complete, fixed in repairs, complete all as specified. Make: Jaquar model No. SLS-WHT-68515110PP or equivalent.

S&F in repair wash hand basin table top of Table top size = 500x415x200mm model 20 FNS-WHT-40931 Jaquar or equivalwent vitrous China including , waste coupling & PVC waste pipe of 32 mm dia etc. complete all as specified and directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms counter type wash hand basin and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including15mm thick screed bed in cement mortar (1:4) incl dismantling of old stone slab complete all as specified.

S&F Vitreous China bowl/urinal flat back size of 465 x 355 x 265mm white, with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste piep)

Supply only vitreous china wash down closet pan (Pedestal pattern) white with ‘S’ trap plastic seat cover white including connection to out going pipe & to flushing pipe, anti syphonage pipe etc complete all as specified and directed by Engineer-in-charge

S&F in repair PVC Water tank cover (threded) for any Ltrs capacity.

MAHADEV ENTERPRISES

PARAS RAM ASGOTRA AND SONS