Maintenance of Public Toilet at ThalavaiPuram Mangala Kudirupu in Thachanallur Zone, Tirunelveli City Municipal Corporation. Ward No.2

Amount

Dismantling, clearing away the materials from work area as directed by department officer.

Floor finish and dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs

White Washing, Colour Washing & Distempering Thorough scrapping of old plastered surface

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and Eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Plastering with Cement Mortar 1:5 mix. using 12mm thick with all cost and convleyance of materials and all labour charges etc., complete as per standard specification

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. (Data 2022-23 SI-67)

Painting two coats over Iron works with ready mixed enamel paint of approved colour and quality including priming coat etc., complete

Manufacturing supplying and fixing of MILD STEEL Window made out of 40 x 40 x 6 mm M.S angle for outer frame, 35 X 35 X 5mm M.S.Angle for outer frame of shutter. The entire shutter area shall be covered with CRC sheets ( 18 G ) with 5Nos,of stiffners using M.S.Flats of size 25 X 6mm at equal intervals horizontally. The corners of the frames and shutter with CRC sheets shall be welded by adopting flash butt welding or any other suitable method. Provision towards 3Nos, of Hinges incase of single shutters / 6Nos,of Hinges incase of Double shutters of 125 X 31 X 1.25mm size placed at appropriate intervals and provisions shall be made for Tower bolts 2Nos, Aldrop 1No. The frame shall be provided with 6Nos,of Hold fast of 200mm length using 50 X 6mm M.S.Flat. The entire frame and shutter shall be provided with one coat of red oxide primer including cost of hold fasts,hinges, locking arrangements, handles wind appliences etc., complete and as directed by the departemental officers.

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement

Dadooing walls with Glazed tiles of sizes 305mm X 200mm X 6mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P- Sand)) over 10 mm base layer plastering and pointing with white cement neatly as directed.

Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete.-10 cum

Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

Supplying and fixing of 18” size Oriya type Indian Water Closet with new glazed earthen ware Indian water closet of 20” Thrift pun type of approved quality with P or S trap with sand cushion and forming, flooring all-round the water closet using 40mm size broken with jelly in ration of in Cement Concrete of 1:2:4 (One cement, two sand and four aggregate) of 4” thick and plastering with Cement Mortar 1:3 (one cement and three sand) mix 20mm thick using river sand including fixing the water closet in positing and giving necessary connection to CI Stack etc., complete

Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)

Supplying and fixing best approved quality Brass C.P / Al anodised Towel rail 600mm. long and 20mm Diameter with brackets of same material including cost of Teak-Wood plugs and C.P.Screws etc., complete complying with standard specifications

Supplying and fixing best approved quality C.P.Soap Tray of size 150mm X 100mm including cost of Teak Woodplugs, brass screws complete complying with standard specifications.

Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter

Wiring with 2 x 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet for 15A 3 pin non inter locking wall socket with 15A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed power plug point

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) for open PVC plug point PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box in flush with wall with 3mm thick hylem sheet cover for 5A 3 pin non inter locking wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire (SD 37)

Wiring with 2 x 1.5 sq.mm. (22/0.3) for open PVC light point /fan point PVC insulated unsheathed SC copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A FT switch in flush with wall covered with hylem sheet of 3mm thick with painting of suitable color (for electronic regulator) (SD 02)

Supply and fixing of LED light 20W 4 Feet with LED Fitting (SD 88)

Supply and fixing of 300mm SL bracket with fancy glass shade and 40W bulb

Suppling and fixing in position 15mm diameter brass / C.P screw down tap / pillar tap / swan neck tap (heavy duty) of approved make conforming to I.S.specifications and quality including cost of shellac, thread etc.complying with standard specifications and including cutting and threading wherever necessary

Conducting Geophysical investigation for finding ground water table with necessary T & P including all labour charges etc complete as per std spec.

Drilling of borewell anywhere in Tamilnadu including transportation from one place to another place within Tamilnadu in alluvial soil or sedimentary strata of clay and sand or sand, stone, shale, pebbles, boulders etc., by first taking a pilot bore of 140 mm/150mm dia and then enlarging to required dia by direct or reverse rotatry mud and circulation method using Contractor's rig, fuel, labour, drilling, betonite mud and water required for drilling at the site shown by the TWAD Officers including construction of mud pit (only Calyx drills are to be used).

Drilling 140 / 150 mm dia Pilot Bore upto 60 m depth ending below ground level.

Supplying of 140mm dia PVC Special Blue pipes for borwelles outer casing pipe of best quality including all labour charges etc., complete as per SI no 159.A (c) PWD schedule of rate and standard specification

Labour Charges for inserting PVC casing pipes assembly (with slots or without slots) in the drilled hole including the jointing the pipes with PVC couplers with cement paste etc. complete - 140 mm OD PVC Casing Pipes Assembly

Supply and Installation of 1.5Hp power jet pump set for pumping out water from bore well as directed by department officers

Erection of power pumps in borewell labour charges for erection of twin packer duplex type jet pumps in borewells upto 150 mm dia including fixing of Suction pipe regulating valves with jet assembly upto a maximum depth of 30 m and delivery pipe valves pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three indicator lamps capacitor and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumps and trail run for 10 days including signing of completion of reports as required by EB authorities and finishing the pipe holes including the foundation bolts, nuts and earth pits. - Upto 3 HP

Supplying and following pipes and specials

25mm PVC Pipe

25mm PVC Union

25mm PVC FTA

25mm PVC MTA

25mm PVC Elbow

25mm PVC Bend

25mm PVC Coupler

25mm PVC Tee

25mm PVC Shoe

25mm Tank Fitting

25mm Ball Valve

25mm 3way Ball Valve

25mm GI Bend

25mm GI Coupler

25mm GI Hose Collor

25mm HDPE Hose

20mm PVC Pipe

20mm PVC Coupling

20mm PVC Tee

20mm PVC Ellbow

20mm PVC Bend

20mm PVC End

20mm Ball Valve Bronze

20mm Tank Fitting

20mm x 20mm Threaded Elbow

20mm x 100mm GI Pipe Nipple

15mm GI Elbow

15mm GI Hex Nipple

15mm x 300mm Pipe Nipple

15mm x 600mm Connection Hose

15mm x 100mm GI Pipe Nipple

32mm GI Bend

32mm GI Hose Collor

32mm HDPE Hose

32mm PVC Coupler

40mm PVC Pipe

PVC Adhesive (Solution)

Shellac

Thread Ball

Wooden Plug, Clamp and Screws

110mm PVC Pipe

110mm PVC TEE

110mm PVC bend

110mm PVC Elbow

110mm PVC Shoe

PVC Tank

Labour (Plumber: 1-Skilled, 1-Semi Skilled)

Writing name of the toilet using paint in toilet building as specified by department officers and the rate includes labour & material.

Cleaning the toilet area all around and removing the debrises away complete as directed by department officers