Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹20,000
Closing Date
1 Jul 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Accessories Division, Lucknow
HINDUSTAN AERONAUTICS LIMITED Accessories Division, Lucknow Post Office, Lucknow - 226 016 Uttar Pradesh, India
Non-comprehensive maintenance contract for 199 Nos. rigs/machines for Two Years
8127
SPA-23IN/9/1
Works
Accessories Complex - Lucknow Divn - Plant Maintenance
₹0
₹20,000
1 Jul 2024
18 Jun 2024
18 Jun 2024
1 Jul 2024
Non-Comprehensive Maintenance Contract for 199 Nos. machines including simple to complex Rigs, panels, control panels from various manufacturers as per Annexure-1. Machines covered in the contract are indicative and may increase/decrease during contract period.
Contractor shall depute team of four skilled technicians/ Electricians and one supervisor on all working days for attending the regular service requirements and rectify the breakdowns. If required Technicians/ Electricians may be called on Sundays & Holidays for preventive/ maintenance work as per instruction of engineer-in-charge.
Scope of work covers breakdown maintenance, preventive maintenance of control Panels of various machines, rigs and motors of Instrument factory and ASERDC area. Due care has been taken to mention all maintenance activities to be carried out by the party & brought out in the Scope of Work. However, any work pertaining to machine’s health not mentioned explicitly will also be done as per direction of EIC.
This contract shall not cover overhauling & major repair (AC/ DC drive, Semi, Automation, Software related drive/ panels, Torque control/ monitoring device) of Electrical Panels, control Panels of any machine / equipment in Instrument factory and ASERDC area. Contactor’s team will assist HAL personal in rectification of major breakdowns.
HAL will not accept any temporary work/ shortcuts like loose fittings, improper cabling, termination, hanging wires, hoses, temporary electrical connections etc. this will also be taken into account while evaluating performance of the contract.
Contractor should not bypass rigs, panels, operator safety interlocks. The violation of the same will be treated seriously.
HAL will arrange all maintenance spare parts as needed. However, contractor should monitor & continuous feedback about the consumption & replenishment of the same to be informed timely.
The contactor will prepare a site / complain register to record the day to day breakdown/ preventive maintenance activity status.
Contractor will have to arrange all tools and tackles like spanners, screwdrivers & testers, multi-meters (calibrated) etc. for the maintenance work before deputation.
Generally contractor should not change/ transfer their maintenance personnel and supervisor from the site without EIC prior permission.
Any breakdown/ damage to machine/ accident on account of wrong maintenance practices will be investigated jointly by HAL and contractor. The loss on account of the same will be recovered from the contractor.
Breakdown calls must be attended within 02 hours after receiving the breakdown information from maintenance/ user department.
The damaged parts replaced by the new ones are to be returned back and to be stored in defined location in Maintenance Department.
Normal working hours shall be 0800 hrs. to 1600 hrs. (General Shift) for attending the regular service requirements and rectify the breakdowns, breakdown work may continue beyond normal working hours. However, maintenance services will be not be limited to working days only. If required contractor has to depute their skilled electrician/ technicians after normal working hours/ holidays/ Sundays in case of emergency as decided by engineer-in-charge.
Description of Preventive & Breakdown Maintenance:-
Rectification of any defect found during the checking and ensuring serviceability of machines/ electrical panels etc.
Ensuring proper wiring up to the Control elements such as Contactors, SSRs or Control Relays, Transformers, electrical panels, fans and switchgears etc. in the machines/panels.
To maintain 5 S in all maintenance activities.
Cleaning of Control Panel and other electrical items on the Rigs/panel like motors, fans; with the use of Vacuum Cleaner/ Blower, Rust remover, Electrical contact cleaner, etc.
Checking all electrical contacts for loose connection, and tightening if required.
Visual checking of wire insulation inside and outside of the control panel for damage wherever possible and replacing the same if required.
Measuring Power cable insulation resistance wherever possible as directed by In-charge.
Measuring Motor Winding Resistance and Insulation Resistance wherever possible as directed by EIC.
Reporting to the Engineer-in-charge or Shop In-charge without delay about the defects noticed during machine repair.
Quarterly Preventive Maintenance of all electrical hardware installed in the machines, electrical panels etc. by checking cleaning, soldering to ensure about proper contacts, wiring and connection. On need basis replacement of electrical items/belts/ nut and screws to be provided by HAL. Wiring/cabling & minor mechanical works related to machine maintenance are included.
The contract contemplates servicing, repair only. It does not cover any major repair & overhauling.
Any other activities not specified but necessary to clear the breakdown to be done by the contactor.
The contractor will intimate in writing the name, designation, qualification & experience details of contract Execution Team.
Contract Execution Team Members:- Contractor shall submit details of Engineers & Technicians who will be part of contract execution team. Contractor shall ensure four skilled technician/electrician and one supervisor team to run the contract smoothly.
Contractor will submit an undertaking about their competence at time of signing the contract. The contractor shall ensure that his authorized representative(s) is / are available as per work requirement.
The min qualification and experience of the deputed person will be as follows Supervisor – BE/B Tech with min. 03 years of experience / Diploma with Min. 05 years of experience on similar electronics, electrical panel & machines. Technician – Diploma with Min 02 years of experience on similar machines, ITI with 03 years of experience on similar machines.
The contractor will ensure that all necessary precautions are taken by their persons during the work. Any accident caused due to incompetency of the person will be the responsibility of the contractor. The amount will be compensated from the bills in case of any such event occurs.
FRISKING / CHECKING PROCEDURES
All contract staff shall be liable to be frisked/ checked by the security personnel at Client premises or on duty at any time during performance of their duties. If anything untoward is found, it must be reported to Officer in-charge.
The contractor will be responsible for the conduct of his staff inside HAL premises.
Vendor Name:
ANNEXURE-B
E-Tender No. SPA-23IN/9/1, Dated 07.06.2024
The contractor shall fully acquaint himself with the scope and nature of working conditions, etc before submission of tender/offer. No claim will be considered later on the grounds of ignorance or otherwise of the conditions under which the work will have to be executed.
Acceptance of Tender: The Contractor shall be bound to accept the award of contract at the rates quoted/ agreed by him. Failing which the EMD of the contractor shall be forfeited and party shall be debarred/ blacklisted as per HAL-ADL rules.
Contract Period:The Contract shall be valid for Two Years from the date of acceptance of work order.
Compensation for Delay: 1). If the work is not completed with in stipulated date of completion, the compensation for delay shall be deductible from any sum payable to you under work order or any other contract with HAL. The compensation delay shall be @ 1% of total payable amount per week limited to the maximum 10% of total payable amount. 2). In event of contract personnel being on leave/absent, the contractor shall ensure suitable alternative to make-up for such absence. To meet such eventualities, the contractor shall make provision for leave reserve. Absentees shall attract penalty of ₹ 400/- per day per technician and ₹ 600/- per day for supervisor. 3). Penalty will not be levied for breakdown pending for want of spares, fabrication/ purchase to be arranged by HAL.
Price:- The quoted price shall be on the yearly basis. The quoted prices should be inclusive of GST.
Payment Terms:- Payment shall be made on quarterly basis through e-payment system. Hence, bank details are to be provided by the successful contractor.
Risk Clause:- The contractor shall be responsible for completion of service contract as required by HAL-ADL as per contract terms & conditions. In case, the contractor fails to execute the contract either in terms of quality or quantity or if any work remains unattended within the stipulated time, HAL-ADL is empowered to take decision and get the same attended by any other Agency at the risk and cost of the Contractor. Any extra expenditure incurred in this connection will be recovered from the bills of the Contractor.
Contract Agreement:- Successful contractor shall execute an agreement on a general stamp paper of the value of Rs. 200.00 on the enclosed Proforma. All partners of the contractor shall sign the agreement or one partner should have proper authority letter from all other partners. The authority letter has to be forwarded with the agreement. The agreement is to be executed within 21 days from the date of acceptance of work order. Any delay in execution of agreement shall attract a penal recovery @ Rs.2500.00 per week subject to maximum of Rs. 10,000.00
PF & ESI :- The contractor is required to comply with the provision of PF & ESI act. The contractor shall be required to indemnify HAL for any liabilities arising on account of ESI & PF act as per Performa provided by HAL and same to be dully filled and signed on Non-Judicial stamp paper of Rs.100.00 in front of notary and should be enclosed with the acceptance of order.
Security Deposit:-
The successful tenderer will be required to furnish security deposit for the fulfillment of contract. The security deposit shall be 5% of the original contract value : -
Staff Entry:- Entry of staff engaged for the work shall be controlled as per HAL security rules & regulations. Material:- All material whether to be consumed in the work or to be taken back later shall be entered through proper challans duly checked & entered by HAL security gate.
Parallel Contract: HAL reserve the rights for entering into parallel contracts with other firms/ Contractors for the same requirement if it is found necessary.
Validity of offer: Offer should be valid for a period of at least 120 days from the date of opening of tender.
General Conditions: (a) Required tools and tackles are to be arranged by tenderer. (b) Unsolicited letter/canvassing / post tender correction Canvassing by tenderer in any form including unsolicited render tenders liable for rejection. (c) The HAL reserves all the right to accept/ reject any or all the tenders without assigning any reason whatsoever.
Name of Vendor:
Annexure-1
List of Test Rigs / Panels / Machines of Instrument Factory and ASERDC
Alternator test rig (Jaguar) Part No. 203700000
Alternator test rig (Jaguar old) Part no. 12110
Starter gen test rig
Motor mode test rig NAL-MSC-X111/1050
Motor mode test rig
Alternator test rig (Mirage 2000)
PTO (1000/1500M) test rig
Static test rig ( Jaguar regulator)
AC Generator test rig GCA10A1A, Make ASE Italy
Hot Oven Sr.No. 22/26
Hot Oven Sr.No. 355/04
Hot Oven Sr.No. 169/07
Clutching / Declutching Test panel for Jaguar Alternator
Coil winding m/c
Magnatizer -2 Sr. no. 208/08
Balancing machine OLD Sr.no. 96-97 A016
Balancing machine Sr.no. ARD 0725
Balancing machine Sr.no. 2018 A22
SAL 1LA5
Electronic Test Rig for LCA fuel Probe-1800100 A
Electronic Test Rig for LCA fuel Probe-1800100 B
Electronic Test Rig for ALH fuel Probe,GLH2001 000 00
Level switch Test rig, 003766000
FCG test rig, GLH 200100000/1
FCG test probes, 239800000, 239900000
Electronic Test Rig 005150000(LCA)
DRY test rig Part no. 000100000
Electronic Test Rig FCG Probe (LCA) part. No 101003750000
Electronic Test Rig (HJT-36) FCG probes 000200000
Hyd. Rubber Cutting M/c. , (Stamp & Press) E-7926
Rubber Mixture
Hot Oven RP-1 Therelek
Hot Oven RP-2 Therelek
Hot Oven
Hot Oven
Programable Hot oven PID
Programable Hot oven PID
Vacuum moulding Plant.Horizontal/Vertical
HOT oven make Denis
Hammer 500 Kg. Messy
Aluminium Furnace
Hydraulic Trimming machine 12 Ton
Hydraulic Press machine 1000 Ton
Steel Furnace
Bend Saw Aluminium cutting m/c
DC SYSTEM test rig, GLH1002.000.00-1
AC SYSTEM test rig, GLH1001.000.00
ACPU test rig, 9800000, 01/2001
FTU test rig, 1600000/2280
TEST RIG FOR TRU JAG, (2/421/9) old
Test Rig for TRU LCA 2/453/1
ACPU dynamic test rig
Dc master box test rig
Ac master box test rig
Electrical control panel for AC master box Pno. 009150000
Static test rig for PCB screening Pno. 009820000
Test rig DC system LCA Sl. No. 10/3002/101
Electrical control panel for DC master box Pno.000800000
Test Rig for Battery Terminal Box/Junction 009910000
Test rig for electronic unit 4883-1/2,246-710-0700
Impulse Magnetizer IMP -1500 Sl.N0. 207/08
GPPU test rig 008600000-224
Test bench DE test set 1005-1 for 4867,48811 OLD
ATC amplifier test Rig 729879-2
Test panel for control switches P. No 2467101000
GCPU test rig 10/92
Universal test rig for Inverter 221700000
Test rig for amplifires p.no 24271000 A
Test rig for amplifires p.no 24271000 B
Universal test rig Inverter Sl.no 102/11
Test rig FCG content detector old P.No. 2427101600
Test rig for Relay box P.No.2/414
GCPU test rig type -T-REG-01 -00-000
Landing Gear control switch Drg no. 246-710-1001
Test rig electronic unit(block) P.NO.246-710-0700
U-12 Sr.NO. 2/427
Test Rig for RMI 01
Test Rig for RMI 02
Test Rig for PRESSURE SWITCH
Test Rig for Amplifier for Pno- 706/81, 706/82, 706/83
Test Rig for Sensor for PNo. 242-710-1600
Test Rig for Float Valve and Booster Pump
Test Rig for DIFF. PRESSURE SWITCH
Test Rig for Lighting Box
Test Panel for control valve
Cycling Rig, REP-11
Test Panel for duct sensor 728-863-3
FCG Test rig 242.710.1600
Pressure switches no 1352-05, 1-1224-89, 1124-21
Motor test bench 72C-7455
Pitch position transmitter test rig 2/425/2
ARU test panel ARU-3VMSR3
Test set up electro-mechanism
Position Transmitter 2/425/2
Test panel for dual hyd. Transmitter, 2/409
Test panel for Pressure Switches, 1650/1651
Test panel for Differential Pr Switch, 2/460
Test rig for BUK 21
USS test panel 40040000
Test For relay box 718112 & 7219441
New Test rig for Amplifire P/N 242710-00
Test rig for P/N 2427101600
Test Rig for 1113602 (New)
Test Rig for 1113602 (Old)
CONTROL VALVE, 2/413
UGR-4UK, Y-559CX3, Sl.No. N1240001
Panel For Checking Of Electro Mechanism, 8B2.399.584
Panel For Regulation Of Mechanism, 8B2.399.528
Photoelectric Transducer, 8B2.399.454 FEP-ST-2
Panel For Testing Of Electric Motor, 8B2.399.685
Installation For Checking Armature On Break, 8B80/C-072
Panel, 72S.7317
Panel, 72S.8518
Panel, 520.7873.3599
Installation For Checking Pickup Dsmk, T6363-3831
Installation For Checkingkpu-104, T6363-5426
Rig For Checking Of Pickups Dsmk16, T6364-1507
Inspection DeviceKpu-1T6363-5472I(OLD P/No. T6363-4926)
Inspection Device Kpu-2, (T6363-4927)
Pcb Tester, T6363-5617
Panel For Output Circuit With Open Collectors & Looms, (T6363-5113)
Checking Device For Kpu-Kpp-A, T6363-5116
Code Generator Jk1 With Looms, T6363-5427
Installation For Inspection Kpu Str7-5i, T6363-5477
Panel For System Checking Str7-5i, T6363-5478
Panel For Checking Of Voltage Stabilizer (SN - 15) СН-15, (T6363-5240)
Set Up For Checking Of Stabilizer (SN - 24) СН-24 (KPU 111), (T6363-5489)
Installation For Inspection Kpu-Pdmp1, 922.17.58
Panel For Checking The Stabilizer Sn-10, T6363-4578
Installation For Checking The Stabilizer Sn-24, T6363-5489
Installation For Checking The Stabilizer Sn-15, T6363-5079
Capsule Block test rig 246.710.0500
Cone position indicator Transmitter,BN 4007-0000
Nozzle position indicator 224-710-0400
Dynamic test rig GA2M 1A/45, H 0741
Turbo gas temp indicator test bench
DD Indicator 242-710-0100
Angle of attack indicator 244-710-0700
Altitude test rig,1749000 electronic (induction) heater
BK 53 test Rig 240001
Test rig 242.710.2000
Pressure Switch Test Rig 165000000/165100000
Ultra sonic cleaner
Ultra Voilet light system screen printing
oven of screen printing
Digital cycle counter test set 0502302
Rig for Gauge Pressure Switch 001654000-224
Rig for Absolute Pressure Switch 001715000-224
Absolute Pressure Switch Test Rig 1755000
Test Rig for Environmental control system
Capsule Micro-meter system(LD-27131101)
Capsule control panel-Sl.no.cap 113
Gyro site head
Angle of attack switch pannel
Test Pannel for gyro transmitter
1122 B Indicator test rig
102 DPG-2 test Rig
163700000 mili volt meter Rig for JPTI
Accelerometer Dynamic Tester
Test Rig for DUAL HYD. PRESSURE TRANSMITTER
Capsule control panel-Sl.no.20/91
IAS muti switch test Rig 640.609041
magnetizer 105
Indicting Air speed switch. 244-710-0600
Test Rig for CONTROL BOX for P/No. 729-518-5
Compass Controller test Rig P/No 2417100100
Test rig for compass controller New P/No 2417100100
Integrated test Rig for TURN & SLIP INDICATOR SF1305KTSFA1 (incl Rate table and Insulation Tester,Multimeter, AC Power Supply)
Test Rig for TACHOMETER INDICATOR P/No. 244-710-0600
Test Set up for GAMU-C2J Base Test Set 2417101000
Test Set up for GAMU-Flux Valve Simulator 2417102100
Test Set up for GAMU-Gyro Analyser Test Fixture Test Rig 2417100500
Test Set up for GAMU-Phase Shifter Test Fixture Test Rig 2417100600
Test Set up for GAMU-Rotor Balancing machine Make Schenk Avery
Test Set up for GAMU-Slaving Amplifier Test Set 9002857
Test Set up for GAMU-System Test Set 241-710-0300
Test Set up for GAMU-Test Rig 11.8/90 V Slow Motion Synchro Drive 2417101400
Test Set up for GAMU-Test rig Angle Position Indicator 2417100900
Test Set up for GAMU-SCOSBY TABLE incorporating Switch Modification TP7122 and Power Supply Control Box
Gyro Magnetic compass Test bench, 46165081003
Test bench for Electronic module, 46165069-003
Sagem final test bench, 260997960
4286 V8 Test rig 411/1
Gyro motor test panel 1A/420
Control box test rig 166300000
Test Rig. of control box P/T No. 1664.00.000
FINAL Test bench for control box 42465077003
Gyro wheel test bench 424-65099-003
RPM indicator part no. Ld2213 -2110
Techo meter/ Transmitter EQPT -2131-000-ADL (I)
Total No of Test Rigs / Panels / Machines
ANNEXURE-A
E-Tender No. SPA-23IN/9/1, Dated 07.06.2024
Eligibility Criterion & Instructions to Bidders
i) Bidder must strictly comply with these instructions while submitting the offer. ii) Bidder to categorically confirm that offer submitted is as per instructions given herein.
Please submit your Quotation for following items in two parts (Price & Technical Bid) in the prescribed format uploaded on e-portal.
This bid should be accompanied by Earnest Money Deposit of Rs.20,000.00 payable through Banker’s Cheque/Demand Draft from any Scheduled Bank/ Nationalized Bank in favour of Hindustan Aeronautics Limited, Payable at Lucknow
Scanned Copies of EMD is to be uploaded on e-portal and original to be dispatched to HAL by post/ courier in order to reach us prior to tender closing date & time as indicated in bid. Failure in receipt of original EMD before tender due date & time will result in rejection of offer. Please mention following information on envelope carrying EMD: 1) Title: EMD for E-tender Bid No.: 2) Tender No. & Due Date: 3) Tender Description: 4) Complete Name & Address of firm submitting EMD
Please dispatch the Original EMD to following address: Head of the Department (Plant Maintenance) Hindustan Aeronautics Limited, Faizabad Road, Accessories Division, Lucknow-226016 (UP)
Firms exempted from submission of EMD must attach a certified copy of GOT's authority allowing for such exemption. The offers without EMD/ EXEMPTION certificate shall be considered as unresponsive and rejected.
Unpriced Bid shall be opened as per schedule indicated on e-portal.
EMD shall be refunded to unsuccessful bidders after evaluation of L-1 vendor.
EMD will be forfeited, if the bidder withdraws/amends or derogates from the tender in any respect within the validity period of his offer submitted.
Scan copies of under-mentioned documents to be uploaded on e-portal:
a). Proof for PAN No.
b). GST Registration Certificate.
c). Firm PF & ESI certificate (if applicable).
d). MSME registration certificate (if applicable).
e).Financial standing/Solvency Certificate for minimum value of Rs. 5,72,418/- from any nationalized/scheduled bank issued within the period of 12 months from the final date of submission of tender.
f). Earnest money of Rs. 28,621.00 in the form of Demand Draft, in favor of Hindustan Aeronautics Limited, Accessories Division, Lucknow from any nationalized/scheduled bank of India.
g). Average annual financial turnover during last three years, ending 31st March of previous financial year should be at least Rs. 4,29,314.00. Audited proof to be attached.
h). Proof of experience of having successfully completed similar work during last 7 years ending last day of months previous to the one in which tender are invited should be either of the following. i) Three similar completed works each costing not less than the amount Rs.5,72,418/-. Or ii) Two similar completed works each costing not less than the amount Rs.7,15,523/-. Or iii) One similar works completed each costing not less than the amount Rs. 11,44,836/-. * Here similar work means AMC/Repair/maintenance/supply & Installation works of Industrial Electrical / Electronics items etc.
Vendor Name:
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
L21672_NIT.pdf
TENDER_DOCUMENT • 0.05 MB
D_Price_format.xlsm
TENDER_DOCUMENT • 0.01 MB
C_Technical_Compliance_Matrix.xlsm
TENDER_DOCUMENT • 0.01 MB
B_TERMS_CONDITIONS.xlsm
TENDER_DOCUMENT • 0.01 MB
List_of_mc.xlsx
TENDER_DOCUMENT • 0.02 MB
Eligibility_criteria.xlsm
TENDER_DOCUMENT • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .