REPAIR REPLACEMENT OF JOINERY FLOORING SANITARY FITTINGS INTERNAL WATER SUPPLY MISC WORKS AT POWER HOUSE LINE AND OMQ AREA IN AFS JALAHALLI UNDER GE M AF JALAHALLI BANGALORE

Amount

Taking down cement plaster including raking out joints hacking for key, scrubbing down with water etc.complete all as directed.

Demolition of Cement concrete (unreinforced) in ground floor and pavings not exc. 15 cm thickness (below or above GL) complete all as directed.

Demolition of brick work or stone/boulder masonry built in cement mortar, including all quoins, arches, pillars etc. but excluding ashlars facings, dressed stonework and precast concrete articles complete all as directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.

Taking down wooden shutters of any description exc. 1 Sqm and n. exc 2 sqm and refixing in same opening complete all as directed.

Taking down wooden Shutters of any description exc 2 sqm each and removing from site complete all as directed.

Taking down wooden shutters of any description exc. 1 Sqm and n. exc 2 sqm and removing from site complete all as directed.

Taking down wooden chowkhats or frames with shutters area exc. 1.5 Sqm and n.exc 4 sqm each and removing from site complete all as directed.

Taking down wooden chowkhats or frames with shutters area n exc. 1.5 Sqm each and removing from site( Steel and wooden) complete all as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing complete all as directed.

Material and labour for providing Precast cement concrete 1:3:6 type C1( using 20 mm graded stone aggt) in window or door cills, lintels, bressummers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc. and setting in CM 1:4 complete with joints to match all as directed.

Material and labour for Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as directed.

Material and labour for 2nd class HW Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as directed.

Supply and fix 35 mm thick 2nd class HW factory made panelled shutters with panel of 12 mm thick veneered commercial plywood kiln seasoned chemically pressure treated including 15 x 6 mm teak wood edging all around the panels complete all as directed.

Supply and fix Glazed and skeleton shutters of 2nd class hard wood 30 mm thick shuettrs, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plane, chamfered or rounded, fitted with cut and miltred beads for securing glass etc, size of members of shutters as specified in SSR Part I Section 8 Clause 8.20 (a) complete all as directed.

Supply and fix Factory made PVC chowkats or frames of size 50x 47mm with wall thickness made out of extruded 5 mm rigid PVC foam sheet mitered at corner and jointed with 2 Nos of 150mm long brackets of 15mm x MS square tube the vertical door prattles to be reinforced with 19 x 19 mm MS square tube of 19 gauge EPDM rubber gasket door frame to be fixed to wall using MS screws of 65/100mm size complete all as per manufacture’s specifications.

Supply and fix Factory made 30 mm thick PVC panel door shutter, manufactured by M/S Rajshree or equivalent ,made from MS tube of 19 gauge x 19 mm x 19mm for styles and 15mm x for top & bottom rails, covered with heat molded PVC channel of 5mm thick sheet and 30x 50mm wide to from styles and 5mm thick x 75 mm wide PVC sheet for top rail and lock rail on either side and 5mm thick x200mm wide cross PVC sheet as gap insert for top rail and bottom rail paneling of 5mm thick PVC sheet fitted with MS frames welded/sealed to styles and rails with PVC sheet beading either side jointed together complete all as per manufacture’s specifications.

Supply and fix MS Butt hinges medium weight cold rolled 100 mm size complete all as directed.

Supply and fix MS Butt hinges medium weight cold rolled 75 mm size complete all as directed.

Supply and fix Aluminium anodised handle 150 mm long complete all as directed.

Supply and fix in repairs 150 mm long Alu anodised handle and fixed complete all as directed.

Supply and fix Aluminium anodised handle 125 mm long complete all as directed.

Supply and fix Aluminium anodised barrel tower bolt 200 mm long complete all as directed.

Supply and fix in repairs 150 mm long Aluminium anodised barrel tower bolt complete all as directed.

Supply and fix Aluminium anodised barrel tower bolt 125 mm long complete all as directed.

Supply and fix 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolt of extruded sections or cast-aluminium alloy and fixed all as directed.

Supply and fix in repairs 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolt of extruded sections or cast-aluminium alloy and fixed all as directed.

Supply and fix in repairs 150 mm size mild steel Helical door spring including roller and roller plate fixed to wooden/steel chowkhats or frame with screw/welding complete all as directed.

Resecuring or easing & adjusting, without taking down of shutter of any description n. exc 1 sqm each all as specified and directed.

All as per Sl item No 30 above but exc 1 sqm and n exc 2 sqm each.

Supply and fix in repairs mortice lock vertical type brass body 100 mm size 4 levers complete all as directed.

Supply and fixF in repairs 40 mm dia cup board knobs fixed with nut, screw and washer of brass, polished complete all as directed.

Supply and fix in repairs MS handle (Left/Right) for steel window as per sample approved by Engineer-in-Charge.

Resecuring, grinding and adjusting steel window shutters and greasing and oiling to the shutter for easy movement including any welding required to make good the shutter all as directed by Engineer-in-Charge

Material and labour for Running welding in repairs, thickness of metal to be welded not exc 6 mm.

Supply and fix in repair floor door stopper of aluminum alloy body and tongue anodized with hard drawn steel spring fixed in floors 150 mm long.

Supply and fix in repairs PVC Cabinet Mirror of size 350x450mm all as directed.

Material and labour for Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed

Material and labour for Plain Cement concrete 1:3:6 type C 1 using 20 mm graded stone aggregateas in ,filling of chowkhat all as directed.

Supply and fix in repairs windows with side hung double shutters(wire mess and glass) including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded

Supply and fix bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as directed.

Material and labour for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0

Material and labour for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

Supply and fix in repairs 25mm thick flush shutters as in cup board , solid core construction with block board core and plywood face panels commercial type on both sides with piano hinge of 30mm width of flaps with 2 Nos of ball catch spring, 1 No of hasp staple & 2 Nos of bow handles etc.,complete all as directed by Engineer-in-Charge

Material and labour for 1st class HW, Beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc., complete.

Supply and fix 12 mm thick plywood grade BWP type BB fixed with screws to timber frame work as in cup board shelves/shutters complete all as directed.

Supply and fix block boards 19/20 mm thick grade 2 quality interior grade commercial type fixed with screws to timber frame work complete all as directed.

Cutting or uprooting grass on old mud phuska, removing rubbish off the premises, cleaning surface complete all as directed.

Material and labour for 50mm thick (avereage thickness) plain Cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate as in padding concrete on roof after thoroughly cleaning the roof with water and finishing the surface even and smooth when concrete is green all as direced.

Supply only integral water proofing powder

Material and labour for water proofing treatment on horizontal and vertical surfaces with polymeric water proofing membrane at the rate of 4 Kg/Sqm reinforced with minimum 160 Gram/Sqm non-woven polyster mat over a coat of oil bound bitumen primer at 0.20litres/Sqm and a coat of hot blown bitumen 85/25 or 90/15 at the rate of 1.20 Kg/Sqm applied on the top of polymeric membrane and finally finished with a coat of bituminous aluminum paint at the rate of 100 gram/Sqm all as specified and directed

Racking out joints / pointing in cement mortar to squared rubble masonry coursed or uncoursed complete all as directed.

Material and labour for keyed pointing in CM 1:4 for squared rubble masonry all as directed.

Supply and fix in repairs Fancy type powder coated curtain rod 20 mm dia including brackets all as directed.

Supply and fix Galvanised MS wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanized wire staple including fixing with beads supplied with joinery incl MS Flat 15 x 3 mm thick with hole to receive wire mesh incl nut bolt complete all as directed.

All as per Sl item No 56 above but fixed in repairs.

Material and labour for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded mechanically crushed stone aggregate as in subbase , paving and plinth protection finished even and smooth without using extra cement complete all as directed.

Material and labour for 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded mechanically crushed stone aggregate as in flooring finished even and smooth with out using extra cement complete all as directed.

Material and labour for Granite 20 mm thick Black colour (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl screed or bedding layer of mortar 15 mm thick in CM 1:6 complete all as directed.

Material and labour for coloured Non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0 .11 sqm but not exc. 0.18 sqm in floor etc. set and jointed in neat cement slury out pointed in white cement to Match incl screed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes all as directed.

All as per sl item No 61 here in before but in vertical surfaces with 10 mm thick cement plaster in CM 1:3 as backing coat.

Material and labour for coloured Non skid tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0 .6 sqm but not exc. 0.11 sqm in floor etc. set and jointed in neat cement slulry and pointed in white cement to Match incl screed or bedding layer of mortar 15 mm thick in CM 1:6 complete all as directed.

Material and labour for Glazed ceramic designer coloured tiles of size 300 X 200 X 7 mm thick as in vertical surface such as skirting / dado, set, jointed in neat cement slurry and pointed in white cement using pigment to match color of tiles incl 10 mm thick plaster in CM 1:3 complete all as specified & directed .

Material and labour for coloured Vitrified ceramic tiles 10mm thick dark shade (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed or bedding layer of mortar 15 mm thick in CM 1:6 complete all as directed.

All as per sl item No 65 here in before but in vertical surfaces with 10 mm thick cement plaster in CM 1:3 as bccking coat.

Material and labour for Cement concrete chequered pre polished coloured tiles 30cm x 30cm x20mm to25 mm thick, machine pressed; set, jointed and pointed in neat coloured pigment in floors,incl screed or bedding layer of mortar 15 mm thick in CM 1:6 incuding dismantling existing tiles all as directed.

Material and labour for 15mm thick rendering in CM (1:6) on brick/ concrete wall surface finished even & fair without using extra cement all as directed.

Material and labour for Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete wall surfaces all as directed.

Material and labour for Rendering 5 mm thick in CM 1:3 on fair faces of celing surfaces & finishing the surface even & smooth w/o using extra cement all as directed.

Hacking out old broken glass pane any thickness any size from wooden/steel window frames all as directed.

Supply and fix sheet glass 3 mm thick ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as directed.

Taking up or down steel tubing and connections 15 mm bore from any position (wall ceiling floor etc) including cleaning for refixing or offering credit complete all as directed.

Taking up or down steel tubing and connections 20 mm bore from any position (wall ceiling floor etc) including cleaning for refixing or offering credit complete all as directed.

Supply and fix 15mmTubes, 'medium grade' galvanised, with all fitting fixed to walls ,ceilings or laid in floors all as directed.

Supply and fix 20mmTubes, 'medium grade' galvanised, with all fitting fixed to walls ,ceilings or laid in floors all as directed.

Re-fixing old steel water tubing 15mm bore in new or old position fixed to walls ,ceilings or laid in floors all as directed.

Re-fixing old steel water tubing 20mm bore in new or old position fixed to walls ,ceilings or laid in floors all as directed.

Supply and fix in repairs Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms)) of 15 mm bore.

Supply and fix in repairs,Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or ' Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed of 15 mm bore.

Supply and fix in repairs Bib tap cast copper alloy with crutch or butter fly handle screwed down, screwed for iron pipe of 15 mm bore

Supply and fix in repairs Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm 90gms) of 15 mm bore.

Supply and fix in repairs stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of 15 mm bore.

All as per item No 83 above but fancy type chromium plated with long shank and cup (concealed type).

Supply and fix in repairs Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms) of 15 mm bore

Supply and fix in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed of 20mm bore

Supply and fix in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm.

Supply and fix in repairs Brass chromium plated shower rose 125 mm size with or without swivel joints incl fixing to steel pipe or union.

Supply and fix in repairs Health faucet CP for iron pipe 15mm bore with all accessories complete all as directed.

Supply and fix in repairs PVC flexible Waste pipe 32mm dia.

Supply and fix in repairs PVC flexible Waste pipe 40 mm dia

Supply and fix in repairs high/low level PVC valveless, syphonic action type flushing cistern including flush pipe inlet, ball valve, float and handle including brackets of approved make for EWC & Indian type WC comp;ete all as directed.

Excavating in trenches not exc 1.5mtrs wide and n exc 1.5mtr in depth for foundation etc., not exc 10sqm on plan and not exc 1.5m in depth and getting out in soft/loose soil complete all as directed.

Returning filling including, spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as directed.

Removing excavated materials n exc 50mm and depositing where directed at a level n exc 1.5m above the starting point complete all as directed.

Supply and fix 110mm bore PVC pipe (SWR) single socketed in any length with rubber ring joints fixed to wall complete all as specified.

Supply and fix 75mm bore PVC pipe (SWR) single socketed in any length with rubber ring joints fixed to wall complete all as specified.

Supply and fix in repairs for PVC (SWR) bend 110 mm dia.

Supply and fix in repairs for PVC (SWR) bend 75 mm dia

Supply and fix in repairs 75 mm CI floor trap with CP grating incl jointing to waste pipe incl fixed in cement conc block 30x30x30cm type B1 1:2:4

Supply and fix in repairs sinks made of stainless steel 1mm thick kitcen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mmX 420mm bowl size 410mmX330mmX160mm all as specified and directed

Supply and fix in repairs stainless steel single bowl with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460 mm with bowl size 410mmx330mmx160mm .

Supply and fix in repair viterious china white wash hand basin flat back white in colour ISI marked of size 550 mm x 400 mm with chromium plated waste coupling and PVC waste pipe fixed to walls with CI brakets 2 Nos embedded in CM 1:4 type B-1 size 30 xm x 20 cm x 20 cm complete.

Supply and fix in repairs viterous china squatting pan Orissa pattern size 580 x 440 mm white with "P" and "S" trap front or back inlet etc incl provisioning of lime concrete complete all as directed.

Supply and fix in repair vitreous china wash down water closet, pedestal pattern, white in colour incl white seat cover ISI marked 'P' or 'S' trap, fixing bolt and jointing.

Cutting into existing manhole for connecting 150 mm bore SGSW pipe and making good all as directed.

Supply and fix in repairs PTMT grating 100 mm dia with or wihout hole min weight of 25 gms incl fixing with white cement complete all as directed.

Supply and fix in repairs PTMT grating 125 mm dia with or wihout hole min weight of 40 gms incl fixing with white cement complete all as directed.

Supply and fix in repairs CP grating 125 mm dia with or wihout hole for water pipe incl fixing with white cement complete all as directed.

Material and labour for preparing old decorated surface of walls by brooming down or by steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil & greasy spots and applying one coat of white wash in fine lime to walls including cornices.

Material and labour for preparing old decorated surface of walls by brooming down or by steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil & greasy spots and applying one coat of white wash in fine lime to ceiling.

Material and labour for preparing old decorated surface of walls by brooming down or by steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil & greasy spots and applying one coat of distemper oil emulsion.

Material and labour for preparing old decorated surface of wall/chajja by brooming down or by steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and applying one coat of cement base paint on surface of wall/chajja.

Material and labour for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint).

Material and labour for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint.

Material and labour for preparing old decorated surface of walls and applying one coat of weather proof exterior emulsion paint of approved colour and shade all as specified and as directed by the Engineer - in - Charge.

Material and labour for Preparation of newly plastered or un plastered surfaces of walls and applying three coats of white wash all as specified.

Material and labour for Preparation of newly plastered or un plastered surfaces of ceiling and applying three coats of white wash all as specified.

Material and labour for Preparation of newly plastered or un plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of alkalli restistant primer all as specified.

Material and labour for Preparation of newly plastered or un plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant primer all as specified.

Material and labour for preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified.

Material and labour for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified.

Cleaning and removing of vegatations, small trees, muds, garbage, wastage on inaccessible RCC roof ,AC Sheet roof, below wind tie, cleaning of AC sheet/CGI Sheet vellay gutters and saft portation of wall surfaces, back side of toilet portion and above Chajjas portion all as specified and directed by Engr-in-charge.

Disconnecting existing tanks exc 250 litres but n.exc 500 litres capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately)

Disconnecting existing tanks 500 ltr b.nexc 1000ltr , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately)

Supply and fixing 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical, with closed top), hoisted and fixed in position all as specified in SSR Part I including taking down old one as directed.

Supply and fixingin repair aluminium wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by the Engineer-in-Charge

Aditya Associates

Sri Lakshmi Venkateswara Enterprises