ADDITION ALTERATION BY RAISING HEIGHT OF BOUNDARY WALL AND PROVISION OF OPEN SHED VEHICLE PARKING NEAR BLDG NO P27 AND PROVISION OF STORAGE ACCOMODATION CUM SAMPLE ROOM AT CE CG GOA

Amount

Dismantling wrought iron or mild steel work of any description not otherwise as directed.

Demolition of concrete (reinforced) of any description and in any position not otherwise specifically provided for as per specification and directed.

Taking down mud plaster on brick or stone walls, etc.including raking out joints, hacking for key, scrubbing down with water, etc as per specified and directed.

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft/disintegrated rock all as specified and directed.

Excavation in post holes(similar holes) each not exc 0.5 Cum, getting out, soft/disintegrated rock returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm all as specified and directed.

Excavation in trenches not exc 1.5m wide in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc not exc 10 sqm on plan and not exc 1.5 depth and getting out in soft/disintegrated rock all as specified and directed.

Excavating in trenches, n exc1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out hard/dense soil as per specification and directed.

M&L cement concrete 1:4.8 Type D2 in foundations filling and mass concrete all as specified and directed.

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.5 cm long and not exc 30 cm long diameter of neck 16 to 20 mm all as specified and directed

M& L for RCC M-25 (Design Mix) using 20mm graded aggregate in columns, pillars, piers, posts and struts all as per specified and directed.

M & L for RCC M-25 (Design Mix) (using12.5 mm aggregate) in beams, cantilevers, bressummers lintels over 1.5m span, chajjahs all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions square rough finished surface all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.as per specification and directed

Formwork to chullah hoods, chajjas, troughs and similar items including edges as per specified and directed

M&L Pre-cast cement concrete block masonry Type C1 1:3:6 (20mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:4, complete all as specified and directed.

M&L Rendering 15mm thick in CM 1:6 on fair faces of brick work/block or concrete surfaces finished the surface even and smooth without using extra cement complete all as specified and as directed.

M&L Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished the surface even and smooth without using extra cement complete all as specified and as directed.

M&L Preparation of new plastered surfaces and applying two coats of cement based paint over a coat of alkali resistant priming paint complete all as specified and as directed

M&L for two coats of distemper oil emulsion over a coat of chalk whitening including preparation of ceiling surfaces etccomplete all as specified and as directed

M&L Preparation of new plastered surfaces and applying two coats of distemper oil emulsion over a coat of chalk whitening including preparation etc complete all as specified and as directed

M& L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc as specified and directed

S&F Plates (plain or chequerred) channels, square cut or notched (ordinary and countersunk with riveted, bolted or welded attachment as per specified and directed

S & F Rolled mild single stanchions of square hollow section with flange plates, caps, bases. splices, angle brackets, cleats and other connections Fe-410-W grade E-250 Quality ‘A’ etc as specified and directed

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed

S & F MS angles for posts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, welding etc; flat iron fillets (for securing wire) conforming to Fe-290 Gde E-165 all as specified and directed.

S & F as in repairs of galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of stranded rails straining bolts, including securing, or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc.as specfied & directed (each line wire to be measured)

M& L for Preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

M & L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed.

M&L for 75mm thick cement concrete Type D2 1:4:8 as sub base of floors all as specified and directed.

M&L for 100mm thick cement concrete Type B2 1:2:4 as in floors in panels all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming hard/dense soil in layers not exc 25 cm complete all specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm in rocks complete all specified and directed.

Removing excavated material at a level not exc. 50m and depositing where directed at a level not exc.1.5 m above the starting point all as specified and as directed.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed

M &L for providing precast cement concrete 1:2:4 Type B1(using 20 mm graded aggregate) as in kerb stone and setting in CM 1:6 complete with joint to match all as specified and directed.

M & L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade all as specified and directed.

M &L for vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and directed

M &L for vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, laid on vertical surfaces/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match vertical surfaces with backing coat of 10mm thick in CM 1:4 complete all as specified and directed

Sand filling under floors or in foundations including watering and consolidation all as specified and directed.

S & F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S & F powder coated anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S & F Pre-painted PUF insulated roofing sheets as in roof covering/cladding to wall fixed in tapping screws as specified.

Supply & fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions and specified & directed

Supply & Fixing Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre all as specified and directed.

S & F Vitreous China wash hand basin of size 580x450 mm white, flat back, and including waste fittings, brass chromium plated 32 mm with long and fly nut screwed shank, excluding taps, waste, chain and plug and porcelain stopper but including cast iron brackets complete all as specified and directed.

Supplying and laying of CPVC pipes of 16mm outer dia., SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified & directed

S&F 15 mm bore Fancy type cast copper alloy chromium plated Pillar taps with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed

S & F Stop/angle valves, fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed

S&F PVC backing looking mirror of size 600mmx450mm fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed

Suppy and fixing brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete all as specified and directed

Supply and fixing PVC (SWR) floor trap, with 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and directed

Supply and fixing PVC (SWR) pipes 75 mm dia, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

M &L cement concrete of nominal mix-M-15, B-0, 1:2:4 using 12.5 mm graded aggregate and adding liquid WPC to the mix by 3% by weight of cement, as in damp proof course to buildings. Note: WPC shall be measured and paid separately.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L cement concrete of nominal mix M-10, C-1, 1:3:6 using 20mm graded aggregate as in plinth protection to buildings.

Supply & fixing hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed

M&L for 200 mm RCC hume pipe class NP2 laid and jointed complete with collars all as specified and as directed

M&L TMT upto and including 10mm dia in stirrups, spacers and binders bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

Providing precast RCC 1:2:4 type B1 20 mm graded stone aggregate as in cover slab In CM 1:4 and finished all exposed surfaces (Formwork including) all as specified and directed.

M&L TMT M/S bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as specified and directed.

Preparation of old plaster surface and applying one coat of weather proof high glow antifungal paint (Dr. Fixit rain coat) on external surface with suitable primer (Dr. Fixit primeseal).

Preparation of new steel surface and applying two coats of epoxy anti corrosive paint over a coat of zink primer as per specification and directed.

Uprooting/ cutting of branches of trees vegetation/bushes removed from site if necessary, specified and directed by engr-in charge.

M&L Point wiring complete with 1100volt grade PVC insulated unsheathed multistranded 1.5 sqmm copper conductor cable confirming to IS 694 FRLS drawn through and including rigid PVC conduit medium grade of suitable size concealed in wall including provision of 1.5 sqmm PVC unsheathed copper conductor and connected to earth dolly, including provision of modular metal fush box module include modular white cover plate with frame top cover for housing switches sockets etc concealed on wall complete all as specified and directed for the following:-

(a) One light point controlled by one way switch 5/6 Amp

(b) One fan/exhaust point controlled by one way switch 5/6 Amp

(c) One socket point 6 Pin 5/6 Amp on same board

(d) One socket point 6 pin, 5/6 Amp on Independent board

All as per item No 2 here-in-before but with PVC FRLS insulated unsheathed multi stranded copper conductor of size 4 sqmm, 1100V grade for 6 pin 6/16Amps switch socket on independent board with PVC FRLS insulated unsheathed copper conductor of size 4 sqmm using as earth continuity wire and connected to common earth dolly complete all as specified and directed.

S & F Modular switch 1 way 6A, 1 module complete all as specified and directed.

S & F Modular socket 6A-2/3 pin combined 2 module complete all as specified and directed.

S&F modular switch socket combination16 A, 6 pin, 3 module complete all as specified and directed

S&F modular electronic fan regulator complete all as specified and directed.

M&L ceiling rose 3 treminals/ PVC polycarbonate isolated body size(65x50)mm surface type, 230V complete all as specified and directed. Make:- Anchor/ Cona

S&F LED tube light fitting 1 x 20 W, 230V wall mounted integrated Aluminum batten, 4 ft LED module fixed on wall/surface/ceiling shall confirm to IS 16103 and shall bear BIS certification marking complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable sizes complete all as specified and directed.

S&F LED light fitting size 2'X2' 36 watts, 230 volt Downlight recessed type with ultra modern designed architectural LED luminaire which provides soft-light and glare free symmetrical illumination suitable for Grid ceiling etc.complete with all accessories prewired and including provision of three core flexible copper wire of size 23/0.0076 and connecting to light fitting complete in all respect all as speceified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

S&F ceiling fan BEE star rated complete with accessories 230 V, 1200 mm sweep energy saving including provision of cable from ceiling rose or connector to ceiling fan complete all as specified and directed.

M&L MCB distribution board, double door CRCA steel sheet enclosure powder coated, SPN 8 Way as in replacement with 200 Amp rated bus bar complete all as specified.Make:- Indoasian/ Standard

M&L for MCB SPN 40 Amp,240 Volt as in replacement complete all as specified. Make:- Indoasian/ Standard

M&L MCB SP 6-32A,240 Volt as in replacement complete all as specified. Make:- Indoasian/ Standard

M&L sub main wiring as of PVC FRLS insulated unsheathed two single core 6.00 sqmm copper multi stranded conductor including one run of single core copper conductor of size 6 sqmm as earth wire drawing with concealed PVC conduit complete all as specified and directed.

S&F sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed.

Supply/ Lay dry river sand/ M sand in trenches for cable protection all specified and directed. Note: Punned thickness only will be measured & Paid.

Supply and lay cable cover LV type 1 flat size 250 X 150 X 40 mm for cable protection all as specified and directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sqmm 3½ core

Dismantling of existing AMF Panel of DG set 82.5 KVA with all electric connection of cables and shifting to other place including taking out cable, refixing of lugs and cable gland and PCC foundation complete all as specified and directed

M & L Earthing complete with galvanized steel earth plate electrode 60cmx60cmx60cm thick buried directly in ground(earth) pit not less than 2.25 meter deep below normal ground level) with top edge of earth plate not less than 1.5mtr below normal ground level connected to galvanized iron or wire of size 4mm earthing lead by means of bolts, nuts check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 of SSR Pt-I connected earthing test point/panel all as specified including GI PCC earth chamber using PCC(1:3:6) Type C-2 using, graded stone aggregate, 50mm thick cast iron frame, precast RCC cover stab using 1:2:4 cement concrete type B-1 reinforced with 8mm dia TMT bars @ 15cm both ways and suitable handle of 10mm round bar, funnel and wire in esh excavation and earth work complete all as specified and directed.

M/s RAJ CONSTRUCTION

M/S P S BABU

M/s J.D. DESAI

M/S J J ENTERPRISES

Mehta and Co.

SOOD ASSOCIATES PVT LTD

M/S. M M S ENTERPRISES