CWE/P-54/2019-20SPECIAL REPAIR TO BLDG NO. P- 33 (OR MD ACCN) UNDER GE (SOUTH) PATHANKOT

Amount

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level), complete all as specified and as directed.

M & L plain Cement Concrete 1:3:6, type C-1, 75mm thick as in plinth protection etc laid in alternate bays finishing even and smooth without using extra cement complete all as specified.

Dismantling floor, hearth, or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Glazed ceramic coloured tiles in skirting/dado 350 x 450 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match required shade over and including 10 mm thick cement plaster in cement mortar 1:4 as in backing coat rough finished surface complete all as specified.

M&L Non-skid cermic coloured tiles 7 to 8 mm thick (square / rectagular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over screed bed 15 mm thick in cement mortar 1:6 complete all as specified.

M&L Non-skid cermic coloured tiles 7 to 8 mm thick (square / rectagular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over screed bed 15 mm thick in cement mortar 1:6 complete all as specified.

Demolition of stone slab and tiles of any description and thickness in floors, aprons etc laid and pointed in any mortar, complete all as specified.

M&L Marble work 18-20mm thick (table rubbed and polished) in steps, jambs, pillars window cills in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixure of pigment to match with black marble of Abu Zebra type, over screed bed 20 mm thick in cement mortar 1:4 complete all as specified.

M&L machine cut pre polished kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, size of each slab not be less than 0.28 Sqm, including rubbing and mirror polishing complete over 20mm thick screed bed in CM 1:6, complete all as specified.

M&L pre polished kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10mm thick screed bed in cement screed 1:4, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing & complete all as specified & directed.

M&L 18 to 20mm thick Granite (black colour) work (table rubbed and polished) in cooking platform and like in CM 1:4 over 15mm thick screed bed or bedding layer in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admisture of pigment to match with shade of granite complete all as specified & directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frames) area not exceeding 1.5 Sqm each including taking out hold fast complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5Sqm and not exceeding 4Sqm each including taking out hold fast complete all as specified and directed.

M&L 1.25mm thick pressed steel frames with one shop coat of red oxide primer 105 x 60 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges (ISI marked), lock strike plate, including cement concrete type C-1, 1:3:6 (using 20 mm graded stone aggregate) as in filling hollow of frame with plain cement concrete and hold fast after taaring of hollow portion of frame complete all as specified and directed.

M&L 1.25mm thick pressed steel frames with one shop coat of red oxide primer 125 x 60 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges (ISI marked), lock strike plate, including cement concrete type C-1, 1:3:6 (using 20 mm graded stone aggregate) as in filling hollow of frame with plain cement concrete and hold fast after tarring of hollow portion of frame complete all as specified and directed

M&L Providing pre-cast cement concrete in Type C1 1:3:6 (20mm graded crushed stone aggregate) in window or door cills, lintels bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling) corbels, brackets etc (of any section indicated) with plain fair faces, including chamfers, weatherings, throating etc and setting in cement mortrar 1:6 complet with joints to match complete all as specified and directed

S&F 35mm thick HDF prelaminated (Wenga/Teak coloured) moulded shutter PUF (Polyurathane foam) ninsuation with minimum density 40Kg/Cum filled in between two HDF sheets of thickness 3.2mm both & border covered with 10mm thick PVC sheet as per Drg No CEPZ/TD-378/sheet 1/1 dated 27/12/2011

S&F 35mm thick single piece factory made wire gauge door shutter of (steel & aluminium XPM) manufacturing by PVC sheets printed 5mm thick on both side on frame made out of MS tube 19 SWG size 19 x 19mm complete in all respect with lock rail & beautified by PVC beading all around fixed with PVC solvent cement complete as per Drg No CEPZ/TD-378/sheet 1/1 dated 27/12/2011

M&L factory made PVC internal door frame of size 100 x 45mm with a wall thickness of 5mm made of extruded 5mm thck PVC sheet of density 600 Kg/Cum manufactured by an ISO-9001-2008 certified company and by joining 3 nos heat bent PVC sheet sections. The inside section of size 90 x 30 mm shall be made from plain colour PVC sheet of 5 mm. The inside section will be covered by sticking two section of size 30 x 35 mm and 70 x 45 mm made from 5mm thick plaibn PVC sheet. The frame shall be mittered cut at two comers and joined with 4 nos of 150mm long brackets of 15mm x 15mm MS square tube. The two vertical door frame are to be reinforced with 40mm x 20mm MS tube of 90 gauge through out the frame. The door frame shall be fixed to ghe wall uning 8/100 mm long MS screws through the frame by using enchor fastners. A minimum of 4 nos of secrews to be provided for each vertical member & minimum 2 nos for horizontal members etc complete as per manufactures spfn & direction of Engineer-in-Charge .

M&L fixing 30 mm thick factory made solid panel prelaminated/plain PVC internal door shutter consisting of frame made out of MS Tubes of 19 gauge thickness and size of 40mm x 20mm for stiles as well as as top, lock & bottom rail. MS frame shall have a coat of metal primer of approved make and manufacture. MS frame shall be covered with heat moulded prelam/plain C channel made from 5mm thick PVC sheet of density 600 Kg/Cum manufactured by an ISO-9001-2008 certified compony of size 30mm thickness, 110mm with width foaming stiles in which 100 mm should be flat & 5mm should be taper and 5mm thick, 135mm wide PVC sheet for top rail and bottom railin which 125 mm should be flat 7.5mm taper on either side of pannel also for lock rail 145 mm sheet, 125mm should be flat & 5mm thick tapper on either side. An additinal 5mm thick PVC strip of 20mm width is to be struck on interior side of the C channel unsing PVC solvent cement adhesive. Panneling of 10mm thick prelam PVC sheet to be fitted in the MS frame welded/sealed to stiles and rails with 30mm wide x 5mm thick PVC sheet beading on either side and additional 30mm wide PVC beading as gap insert for top & bottom rail. Door to be fixed with frame with 3 Nos. MS powder coated butt hinges of size 100 mm x 25mm x 2mm and 50mm long steel screws drilled suitable to passv through both the wall of the MS tube. Other hardware of door should be fixed with 25mm x 8mm size steel screw etc. complete as per manufactures spfn & direction of Engineer-in-Charge .

S & F continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap (when open) 30mm complete all as specified and directed

M & L Second class hard wood small fittings such as brakets of any type, latch and hinges blocks, shaped doors and windows stops and the like, including all necessary labour, articles not exceeding 200 cu.cm each complete all as specified

M&L 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work, complete all as specified.

M & L 300mm long aluminium alloy anodized sliding door (bolt type) (ISI marked) and fixing clips of sheets, cast of extrusted sections and fixing bolts and sliding bolts of extruded section of cast aluminium alloy all as specified.

M & L Mild steel butt hinges, medium weight, cold rolled (ISI marked),100mm long , complete all as specified.

M & L Aluminium alloy handles (ISI marked), cast type, anodised of size 150mm and fixed, complete all as specified and directed.

Supply and fxing Aluminium anodised, barrel tower bolts of extruded section of size 150mm ISI marked and fixed, complete all as specified and directed.

Supply and fxing , 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate (ISI marked) complete including all neccesary welding if required all as specified.

M&L Steel window/ Ventilator factory made out of M S tubular frame made of size 79 mm x 39 mm , 16 gauge rectangular with double side hung shutter with glazing bars 12 x 3 mm flat iron using flash butt welding, hinges (ISI marked) shall be provided to both shutters with fittings including 10mm square bar grills complete and one shop coat of red oxide primer all as per drg No CEPZ/TD/245/01 Sh 1/1, CEPZ-TD/246/01 Sheet 1/2 and Sheet 2/2 all as specified and directed by Engr-in-Charge. Note: Cutting holes for hold fast making good in cement mortar 1:3 and PCC 1:2:4, type B-1 shall be included in the quoted rates.

M&L 3.00 mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified.

M&L Galvanised mild steel wire cloth 0.56 nominal dia of wire and average width of aparture 1.18mm and fixed with tinned tacks or galvanised wire staples, complete all as specified.

M & L preparation new wooden surfaces of any description not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint of colour as approved by GE over a coat of pink primer complete all as specified.

M & L preparation new steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint of colour as approved by GE over a coat of red oxide primer complete all as specified.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically described complete all as directed by Engineer-in-Charge.

S&F Doctor fixit Pidfin 2K high performance 2 component flexible Acrylic polymer modify cement base water proofing coating in two coat 1mm thick dry film mixed in ratio 2:1 by weight or 1.5:1 by volume product of M/S Pidilite Industry Limited Makers of Fevicol adhesive brand complete all as specified

M&L Cement concrete 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in foundation and mass concreting all as specified directed.

Supply and fxing in repairs, Vitreous china squatting pan (Orissa pattern) size 580 x 450 mm, white, with integral foot rests, complete connection to drain (outgoing pipe) and to flushing pipe of 32mm dia and syphonage pipe etc, and complete, all as specified and as directed.

Supply and fxing in repairs, PVC valve less symphonic action type flushing cistern 10ltr capacity , low level white with inlet ball valve float and handle including brackets including 32mm dia PVC flush pipe for low level cistern including all joints , complete all as specified.

Supply and fxing in repairs,Vitreous china Wash hand basin, white, flat back of size 630x450mm including brackets, brass chromium plated waste coupling, and waste pipe PVC 32mm dia including cutting for and pinning in ends of brackets or erecting stand etc , complete all as specified.

Supply and fixing in repair Stainless steel sink with drainage board, 1mm thick for kitchen with plugs, washers and wastes including fixing bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410mmx330mmx160mm fixed, complete all as specified.

Supply and fxing in repair stainless steel plate rack 900 x 600 x 200 mm deep with plate rack, spoon holders , shelves etc , complete all as specified.

M&L PVC connection 15mm size with PTMT nuts on both ends of length 450mm , complete all as specified.

Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick masonry, complete all as specified.

M&L Steel water tubing of 15 mm bore ‘medium grade’ galvanized with all fittings fixed to walls and ceilings or laid in floors, complete all as specified.

M&L Steel water tubing of 20 mm bore ‘medium grade’ galvanized with all fittings fixed to walls and ceilings or laid in floors, complete all as specified.

Supply and fixing in repairs angle valve of cast copper alloy chromium plated (ISI marked), fancy type with capstan head, screwed down high pressure, screwed both ends for iron pipe or for unions 15 mm bore, complete all as specified.

Supply and fixing in repairs, concealed stop cock, fancy type , chromium plated (ISI marked) with long shank and cup , screwed down, high pressure, with capstan head, screwed both ends for iron pipe of 15mm bore, complete all as specified and directed.

Supply and fixing stop valve of cast copper alloy (ISI marked), screwed down high pressure, screwed both ends for iron pipe or for unions 20 mm bore, complete all as specified.

Supply and fixing in repairs Bib taps 15mm bore of cast copper alloy chromium plated (ISI marked) fancy type, screwed down, high presure, screwed both ends for iron pipe or for brass ferrule, complete all as specified and directed.

Supply and fixing in repair 15mm bore pillar tap cast copper alloy with capstan head, fancy type, chromium plated (ISI marked), screwed down, high pressure, with or without lettered 'Hot or Cold' with long screwed shank and fly nuts screwed for iron pipe complete, all as specified & directed

S & F brass chromium plated (ISI marked) shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed

Supply and fixing in repairs vitreous china white soap dish size 160x160x90mm fixed to plugs with chromium plated brass screws complete all as specified

M&L Tubular towel rail, ISI marked 60cm long between flanges , 20mm dia 'D' type Brass Chromium plated incl necessary brackets, fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

Dismantling water tanks and removing from site capacity exceeding 500 ltr and not exceeding 1000 ltr complete all as specified and directed.

Supply and fxing rotational moulded polythene water storage tank, white coloured, tripple layer cylindrical vertical with closed top 1000 litre capacity hoisted and fixed in position, including inlet and outlet pipe connections, 20mm dia and 15 mm dia GI pipes medium grade respectively, 20mm GI pipe medium grade over flow pipe 15 cm long wash out with plug and brass ball valve 20mm, high pressure with polyethelyne float and fly nuts complete all as specified and directed.

Dismantling/ taking down of cast iron or unrienforced concrete or PVC soil waste and drain pipe 75mm or 100 mm dia with all fittings complete all as specified and directed

Supply and fxing 100 mm dia sand cast pipe, cast iron soil waste and vent pipe ISI marked in any length with or without ears with cement joints fixed to wall, complete all as directed

Supply and fxing 100 mm dia sand cast pipe, cast iron soil waste and vent pipe ISI marked in any length with or without ears with lead joints laid in floor or in trenches complete all as directed

Supply and fxing in repairs, Cast iron bends (any radius) diminishing pieces or tapers (larger bore measured), bore of pipe 100mm ISI marked, complete all as specified.

Supply and fxing in repairs, Cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branchs, ISI marked, bore of pipe 100mm, complete all as specified.

Supply and fxing in repairs, 100 mm dia cast iron 'P' or 'S' trap ISI marked complete all as specified.

Supply and fxing 75 mm dia sand cast pipe, cast iron soil waste and vent pipe ISI marked in any length with or without ears with cement joints fixed to wall, complete all as directed

Supply and fxing 75 mm dia sand cast pipe, cast iron soil waste and vent pipe ISI marked in any length with or without ears with lead joints laid in floor or in trenches complete all as directed

Supply and fxing in repairs, Cast iron bends (any radius) diminishing pieces or tapers (larger bore measured), bore of pipe 75mm ISI marked, complete all as specified.

Supply and fxing in repairs, Cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branchs, ISI marked, bore of pipe 75mm, complete all as specified.

Supply and fxing in repairs, cast iron floor trap of 75mm dia of outlet, with grating including jointing to waste pipe with fixed in cement concrete 1:2:4, type B-1 complete all as specified.

Supply and fxing 50 mm dia sand cast pipe, cast iron soil waste and vent pipe ISI marked in any length with or without ears with cement joints fixed to wall, complete all as directed

S & F 50 mm dia cast iron cowl complete all as specified and directed.

S&F stack clamp out of 50 mm by 5 mm lat iron and 16 mm dia round iron stays, including boltsand nuts and securing ends of stays to wall or roof for 50mm bore pipe complete all as specified.

S&F stack clamp out of 50 mm by 5 mm lat iron and 16 mm dia round iron stays, including boltsand nuts and securing ends of stays to wall or roof for 100mm bore pipe complete all as specified.

S&F stack clamp out of 50 mm by 5 mm lat iron and 16 mm dia round iron stays, including boltsand nuts and securing ends of stays to wall or roof for 75mm bore pipe complete all as specified.

S & F PVC (SWR) pipes 110mm dia any length single socketed with rubber ring joint laid in trenches/floor/walls as soil pipe(vent pipe)/weep holes, fixed in repair, complete all as specified and directed.

S & F 110 mm dia PVC (SWR) bends any radius fixed in repair, complete all as specified and directed.

Taking down cement plaster or cement line plaster on stone or brick walls etc including racking out joints, hacking for key scrubbing down with water etc.complete all as specified.

M&L 15mm thick rendering in cement mortar 1:4 on fair faces of brick or concrete surfaces & finishing the surface even and smooth without using extra cement, complete all as specified

M & L 10mm thick cement plaster rendering in cement mortar 1:6 on fair faces of brick or concrete surfaces & finishing the surface even and smooth without using extra cement, complete all as specified.

M & L 10mm thick cement plaster rendering in CM 1:3 in facia or edging of Chajjas, ceiling and roof projection and making the line in true shape & finishing the surface even and smooth without using extra cement, complete all as specified.

M&L rendering 5 mm thick on ceiling surfaces in cement mortar 1:4 on fair faces of brick and making the line in true shape & finishing the surface even and smooth without using extra cement, complete all as specified.

M & L Preparation of new plaster surface of walls including cornices pilaster etc, and applying two coats of oil bound distemper over and including 3mm thick wall care putty, complete as specified and directed.

M & L Preparation of new plastered surfaces of walls and applying two coats exterior emulsion paint over and including 3mm thick wall care putty, all as specified and as directed .

M&L three coats of white wash including preparation of newly plastered surfaces of ceiling complete all as specified.

M & L Preparation of old treated surfaces of walls by removal of existing treatment and applying two coats exterior emulsion paint over and including 3mm thick wall care putty, all as specified and as directed .

Complete removal of existing treatment of walls including cornices pilaster etc, and applying two coats of oil bound distemper over and including 3mm thick wall care putty, complete as specified and directed.

Supply and fxing in repair curtain rod 25 mm dia pre painted synthetic enamel paint of wooden finish , fixed with screws complete all as specified.

Supply and fxing in repair wooden (turned, weathered & mitred) brackets of Ist class hard wood pre polished with french polish and touch wood with cut hole suitable for 25 mm dia rod fixed with screws and gutties in wall, complete all as specified and directed.

Supply and fxing in repair wooden (turned, weathered & mitred) end caps with ornament and fixed to curtain rod with screw of design/shape complete all as specified and directed.

Demolition of brick tile or terracing tiles, single layer on roof complete all as specified.

M & L 40 mm thick brick tiles laid on 15 mm thick cement mortar 1:6 and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement, complete all as specified and directed

M & L Cleaning of existing roof treatment of any description completely and washing, rubbing with water and providing 15mm thick cement plaster in cement mortar 1:4 finished fair and even without using extra cement and providing and laying of water proofing treatment of roof APP (Atactic Polyproplyllen) modified prefabricated five layer 3mm thick water proofing membrane, super thermply non woven polyester mat reinforcement of 160 gsm, weight of membrane @ 3.6 Kg/Sqm over a solvent based bitumen primer @ 0.3 Ltr Sqm by the same manufacturer conforming to IS:3384-1986 , The membrane shall be laid using bitmun torch.The end lap should be 100 mm and the side lap must be minimum 75 mm the membrane shall be first laid up to the parapet wall junction and then shall be overlapped with another membrane (flashing) with an overlap covering up to a distance of 300mm. In case parapet height is less than/ up to 500 mm, membrane shall be terminated at the top of parapet.All rain water pipe opening shall be suitably sealed with the APP membrane all as specified and directed. Note: The rate includes for filling cracks in existing roof with cement putty using suitable bonding agent (shalcrate 42) before laying cement plaster and inclusive of scaffolding for single or double storey building.

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level), including removing rubbish/debris outside defence land complete all as specified and directed.

Demolition of stone slab and tiles of any description and thickness in floors, aprons etc laid dry, complete all as specified.

M&L 75mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in sub base to flooring/path etc, complete all as specified and directed.

M&L vibro compressed coloured rubberised finished precast concrete interlocking paver block any shape and size as approved by GE confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and no pigment, complete all as specified.

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed

Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed.

M&L Point wiring for light/fan/bell point controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS with and including PVC rigid conduit (medium grade) having thickness as per IS code with all fittings including galvanised pressed steel sunkun boxes having thickness as specified 3mm bakalite laminated sheet for switches and sockets, including 1.5sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS as earth continuity conductor connected to common earth dolly including cutting, chiseling for concealed piping and making good disturbed surface area and white wash/colour wash to matching with the existing colour complete all as specfied and directed. Note : (a) Colour coding is to be maintained (Ph-Red, N-Black, Half -Yellow, Earth- Green) (b) On RCC roof ceiling PVC conduit shall be provided on surface for fan with proper fixing clips all as directed.

All as per above item no 99.00 here in before but for one 3 pin socket outlet 5 amp on same board all as specified and directed.

All as per above item no 99.00 here in before but for one 3 pin socket outlet 5 amp on independent board all as specified and directed.

All as per above item no 99.00 here in before but for one light controlled by two way switch all as specified and directed.

M&L Point wiring with 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS with and including PVC rigid conduit (medium grade) having thickness as per IS code with all fittings including galvanised pressed steel sunkum boxes having thickness as specified 3mm bakalite laminated sheet for one 3 pin socket outlet 15 Amp on independent board including 2.5sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS as earth continuity conductor connected to common earth dolly including cutting, chiseling for concealed piping and making good disturbed surface area and white wash/colour wash to matching with the existing colour complete all as specfied and directed. Note : (a) Colour coding is to be maintained (Ph-Red, N-Black, Half -Yellow, Earth- Green)

M&L Switch piano flush type 5 Amp single pole one way, (ISI marked), complete all as specified.

M&L Switch socket combination 2 in 1, 3 pin, 5 & 15 Amp flush type, complete all as specifed.

M&L Switch piano flush type 5 Amp single pole two way, (ISI marked), complete all as specified.

M&L switch socket combination 2 in 1 , 3 pin 5 Amp flush type all as specified & directed.

M&L Socket outlet 5 pin, 5 Amp flush type universal, complete all as specifed.

M&L bell push 5 amp, 240 volt, flush type (ISI marked) , complete all as specifed.

M&L Stepped type electronic fan regulator 0 to 4/5 step , flush type, heavy duty with hum free snubber circuit complete all as specified.

M&L buzzer ding dong AC 230 volts single pole all as specified and directed by Engineer-in-Charge.

M&L Ceiling rose, 3 phase/bakelite 65x50mm two or three therminals isolated body fixed on PVC round block complete all as specified.

S&F in replacement sheet metal enclosure factory made (Double door) IP-43 IK -08 for DBs, single pole and neutral, 240 volts, 50 Hz, 8 way with 200Amps rated copper bus bar fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning, complete all as specified.

S&F in replacement existing unsv distribution board iron clad , double door with IP-54 1K-09 protection suitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/S 4 way, complete with appropriate size copper bus bar and neutral link complete with including one MCCB, 100 amp, 3 pole , 415 Volt with rupturing capacity 16 KA of the same make as of distribution board and and including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge (Outgoing MCB will be measured separately).

M&L MCB SP 6 to 32 Amp, 240V with 10KA breaking capacity of 'C' series 10 KA all as specified and directed.

S&F MCB single pole & neutral 6 to 32 Amps, 240 Volts 'C' series, 10 KA, complete all as specified.

S&F in replacement existing UNSV light fitting with decorative box type fitting 4 feet long with blue coloured end caped for LED tube 1x20 W including LED tube 4 feet long of 20 W having bipin holder, connector block etc complete all accessories including necessary connection with cable of size 0.75 sqmm, three core flexible copper conductor cable PVC insulated and overall sheathed all as directed by Engr-in-chagre

Supply and Fix in replacement existing UNSV tube light fitting with LED 20W inverter batten type fitting 4 feet long aluminium extruded housing,IP-20 ,rated voltage 230 V, 50 hz, system wattage 20W +/- 10%, system current less than 102 mA, power factor more than 0.95, system lumen efficiency 100lm/watt,CCT 6500K, CRI more than 80, THD less than 30%, driver efficiency more than 85% complete all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed. Notes: (i) LM79 report from third party (instead of company in house lab) NABL/UL accredited lab (ii) LM 80 report from LED manufacturer (iii) Test certificates to be submitted before commencement of work/ claiming for payment . (iv) Warranty certificate for minimum 2 years to be submitted from OEM.

Supply,fixing, testing & commissioning of LED Bldg Security light fittings on , comprising of epoxy powder coated housing, enclosed with glass cover in frame, for efficiency not less than 95 lumens/Watt, and minimum wattage capacity of 25 W with ingress protection IP 65/66 and external SPD of capacity 10 KV in addition to inbuilt with drive complete, fixed to 25 mm dia medium grade GI pipe bracket of length not less than 1.20 metre bend to 120 degree shape with necessary GI clamps 50mmx6mm MS strip bend to required shape, nut bolts etc and 1.5 Sqmm 3 core PVC flexible copper cable from junction box to fitting to be layed /drawn inside steel tubler pole complete and testing on completion all as specified and as directed. Note : (i) Minimum 2 years guarantee period of LED fittings (ii) Driver shall be IP 66 degree of protection potted seal type with inbuilt SPD and external SPD of capacity 10 KV to be provided in addition to inbuilt. (iii) Power factor more than 0.9 (iv) Contractor shall submit LM 79 and LM 80 test reports from manufacturer from approved laboratory.

S&F in replacement existing UNSV integrated LED bulk head light fitting 1x10 W suitable conf including electrically to ceiling rose usning cord flexible 3 core PVC insulated overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as directed by Engr-in-chagre

S&F in replacement existing UNSV sleek LED mirror light fitting 2 feet long 1x10 W including LED tube 2 feet long having ballast, bipin holder, connector block etc complete all accessories prewired and connecting electrically to ceiling rose usning PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as directed by Engr-in-chagre

M&L Lamp holder Polycarbonate type with back plate having matching colour to holder for angle/batten fittings complete all as specified and directed.

S&F LED lamp 12 watt 230 volts complete all as specified and directed.

Supply and fix LED Lamp inverter type 09 watt 230 volts,50 Hz, ,lumen 700 lm, rated current 35 mA, CRI less than 80, Charging time 8 to 10 Hours, operating temperature -10 to 50 degree celcius,back up time 04 Hours, complete all as specified and directed.

S&F in single pole and neutral enclosure with a two pin and earth plug and socket complete with including one single pole MCB 240V, 20Amp complete all as specified and directed

Supply & Fix Ceiling fan AC single phase 230/240 volts of size 1200 mm sweep complete (BLDC) type BEE 5 star rated including blade ,down rod etc including connecting to ceiling rose all as required or directed includiing dismantling old one and depositing to MES store yard . Note: Test report and Warranty certificate from OEM for minimum 2 years to be submitted before claiming for payment.

Supply & Fix Exhaust fan AC sinlge phase 230/240 volts of size 250 mm sweep steel body with louvre including connecting to ceiling rose all as required or directed including connecting to ceiling rose all as required or directed.including dismentling old unsv and depositing to MES storeyard.

Supply & Fix Ventilation fan AC sinlge phase 230/240 volts of size 200 mm sweep having plastic body with louvre including connecting to ceiling rose all as required or directed including connecting to ceiling rose all as required or directed.including dismentling old unsv and depositing to MES storeyard.

Supply and laying in replacement of existing unserviceable/ brunt submain wiring alongwith two single core cable PVC insulated and unsheathed cable with copper conductor FRLS (multistrand) of size 4 sqmm drawing into and including concealed PVC rigid non metallic conduit of 20mm dia , 1.8 mm wall thickness and single core cable PVC insulated and unsheathed cable with copper conductor FRLS (multistrand) of 4 sq mm as earth wire including cutting chases in brick wall, rendering in cement mortar 1:4 and making good the disturbed surfaces to match existing complete all as specified & directed. Note: Two runs of 4 Sqmm single core PVC insulated copper conductor cable(FRLS) and one run of 4 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of 20mm dia , 1.8 mm wall thickness wiil be measured as a one unit.

Supply and laying in replacement of existing unserviceable/ brunt submain wiring alongwith two single core cable PVC insulated and unsheathed cable with copper conductor FRLS (multistrand) of size 6 sqmm drawing into and including concealed PVC rigid non metallic conduit of 20mm dia , 1.8 mm wall thickness and single core cable PVC insulated and unsheathed cable with copper conductor FRLS (multistrand) of 6 sq mm as earth wire including cutting chases in brick wall, rendering in cement mortar 1:4 and making good the disturbed surfaces to match existing complete all as specified & directed. Note: Two runs of 6 Sqmm single core PVC insulated copper conductor cable(FRLS) and one run of 6 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of 20mm dia , 1.8 mm wall thickness wiil be measured as a one unit.

Earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6) mm thick buried directly into ground vertically to depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, surrounded on all sides by alternate layers of 150 mm thick charcoal and common salt, connected to galvanized earh lead wire of size 4.0 mm by means of lugs, bolts, nuts, washer, check nuts of galvanised iron or steel all as shown in Electrical plate No. 3 of SSR Part I, wire protected by dia 15 mm bore light grade GI Pipe laid in floor and fixed to wall with proper size of clamps and watering pipe of bore 20 mm dia GI medium grade including wire mesh funnel, PCC, earth chamber pit with PCC 1:2:4 type B-1 using 20 mm grade stone aggreate including form work cement mortar including CI Pit cover with frame, necessary excavation and earth work in any type of soil including testing on completion for desired result all as specified. Note: The rate quoted include cost of 7.5 metre earthing wire with protection pipe.

Supply laying jointing and testing LT XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 sqmm 3.5 core complete all as specified. Note : Earth work , sand cushioning, GI pipe , brick covering for mechanical protection will be measured and paid separately under respective item of Schedule.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth for foundation laying poles, stay assembly and laying of LT/HT cables in any type of soil and getting out, complete all as specified.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm, in any type of soil, complete all as specified and as directed.

Removal of excavated material (soil) to a distance not exc 50m and depositing where directed at a level not exceeding 1.5mtr above starting point complete all as specified and directed

M & L Dry sand cushioning to UG cable 8 cm thick before laying and 15cm thick after laying complete all as specified and directed. Note:- 1.Dry fine sand of best available quality shall be used. 2.Punned thickness shall be made and paid.

M & L Sub class `B` bricks laid dry flat transversely along the length of cable with width equal to the length of bricks over sand cushioning as protection cover of cable laid, complete all as specified and directed.

M & L GI pipe medium grade 40 mm bore with all fittings for cable protection fixed to walls/ poles or laid in trenches, under road/ under culvert/ under path/ under floor /on wall etc with fixing clamps, nuts bolts etc all as specified.

Notes : The Schedule of Credit amount shall be deducted from the total of this schedule(BoQ) to arrive at Contract Sum.

VIKRAM SINGH MANHAS

Abrol construction co