WELCOME MAINT TO OFFR MD ACCN AND OTHER SERVICES TO JCO OR MD ACCN AND MISC BR REP INCL JOINERY TILING ROOFING FLOORING CEILLING PLUMBING SANITARY FITTING BRICK BLOCK MASONARY WALL AND MISC BR REP AT TB-II UNDER AGE BR II IN GE C KHADKI.

Amount

NOTE FOR ALL PAINITNG ITEMS :- The following precautionary measures shall be ensured by the contractor during execution of work :- (i) Contractor shall deposit entire quantity of materials (proprietory materials) in sealed containers required for painting works covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit. (ii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis and the empty containers/ bags shall be deposited in the store of Engineer -In-Charge by the contractor, for verification as per standard consumption/ coverage prescribed by the manufacturers. (iii) Before applying cement base paint/weather proof acrylic emulsion paint contractor shall use the wire brush for the removal of loose paint, dust, algae, moss and filling of crack using crack sealent and cleaning of surface by spray jet. (iv) Application of cement base paint strictly done by spray/mechanical spray machine only, otherwise 30% cost shall be reecovered from the respective item. (v) After completion of painting work contractor shall remove and clean all the droplets/stain of paint left on the floor, glasses and joinery.

NOTE FOR PLUMBING AND SANITARY ITEMS:- (i) Contractor shall deposit entire quantity of plumbing and sanitary wares materials required / covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit. (ii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis. (iii) make specified in BOQ will supersede to all.

Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed.

Supply and fix pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling timber framed work scantlings 40 sq.cm and over in section, in any position complete all as specified and as directed.

Description all as per ser No 06 above but in fillets, rails, posts, rafters, purlins etc under 40 sqcm in section complete all as specified and as directed.

Supply and fix 2nd class soft wood timber framed and fixed clean sawn in scantling complete all as specified and as directed.

Supply and fix rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe-410 W(Gde E-250) quality B complete all as specified and as directed.

Supply and fix steel work in tubular trusses including special shaped washer etc complete using ERW or induction but welded tubes confirming to I.S. 1161-1979 grade St. 240 etc as in purlins complete all as specified and as directed.

Material and labour two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces including all necessary preparation over 10 cms width or girth complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections, complete all as specified and as directed by Eng-in-charge.

Taking up or down 20 mm bore steel tubing and connections, complete all as specified and as directed by Eng-in-charge.

Refixing 15 mm or 20mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed by Eng-in-charge.

Supply and fix tubes 15mm bore medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and as directed by Eng-in-charge.

Supply and fix tubes 20 mm bore medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and as directed by Eng-in-charge.

Cutting chases, pinning & making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in stone/concrete block walls complete all as specified and as directed by Eng-in-charge.

Material and labour preparing plastered or unplastered old surfaces of wall including brooming down or scrap down with steel wire brushes, smoke soot, moulds, moss efflorescent salts and trading oil and greasy spot and applying one coat of cement based paint (any tint) on walls complete all as specified and directed.

Material and labour preparing plastered or unplastered old surfaces of wall including brooming down or scrap down with steel wire brushes, smoke soot, moulds, moss efflorescent salts and trading oil and greasy spot and applying two coat of cement based paint (any tint) on walls complete all as specified and directed. Note : Scraping and painting shall be done by water spray and mechanical spray.

Material and labour preparing plastered or unplastered old surfaces of wall including brooming down or scrap down with steel wire brushes, smoke soot, moulds, moss efflorescent salts and trading oil and greasy spot and applying one coat of dry distemper (any tint) on walls complete all as specified and as directed.

Material and labour preparing of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint of any tint complete all as specified and as directed by Eng-in-charge.

Material and labour preparing of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applyinbg one coat of synthetic enamel paint any tint complete all as specified and as directed by Eng-in-charge.

Material and labour preparing plastered or unplastered old surfaces of walls and applying one coat of plastic emulsion paint complete all as specified and as directed.

Material and labour complete removal of existing treatment of wall and applying two coat of distemper oil emulsion (OBD) over a coat of primer on wall surfaces complete all as specified and as directed by Eng-in-charge.

Material and labour preparing of old undecorated surfaces of walls and applying one coat of oil bound distemper complete all as specified and as directed.

Material and labour complete removal of existing treatment on wall surfaces of any description including brooming down with steel wire brushing, scrapping down smoke soot's, moulds, moss and efflorescence, salts, trading oil and greasy spots etc and applying two coats of Anti fungal weather proof grade exterior acrylic emulsion paint of approved tint (Apex Ultima Protek Asian paints, Nerolac excel top guard, Berger weather coat long life 10 or equivalant brand as specified in CA) over a coat of weather proof primer including filling the cracks etc with crack filling material all as per manufacturers instructions complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre,pulp insulation, Ac etc), any thickness including cover fillets complete all as specified and as directed.

Supply and fix interlocking aluminium alloy anodised snap grid consists of main Tee runners of size 38mm x25mm x1.5mm spaced 1200mm centre to centre and cross Tee of size 25mmx25mmx 1.5mm, 1200mm long spaced between the main Tee at 600mm centre to centre to form a grid of 1200mmx600mm and provide a secondary cross tee 25mm x1.4mm (of length 600mm) to be interlocked of the centre of 1200mmx600mm panel to form a grid of 605mmx605mm and wall angle 25mmx25mmx 2mm. Aluminium alloy extruded section shall be aluminium anodised (minimum 15 micron ) and shall conform to IS 733, IS 1285 and IS 737. including Hangers of GI wire 6mm dia to be fixed by approved rawl plug, level and justers and screws etc. complete all as specified and as directed.

Material and labour 8-9 mm thick Gypsum board/tiles for insulation and accoustic purposes, 60cmx60cm in size, fixed with nails to timber frame work or with staples on snap grid in ceiling complete all as specified and as directed.

Demolition of cement concrete unreinforced in ground floors and pavings n.exc. 15cm thickness below or above ground level complete all as specified and as directed.

Material and labour 75mm thick PCC type C2 1:3:6( using 40mm graded aggregate) as in plinth protection making top surface even and smooth without using extra cement complete all as specified and as directed.

Demolition of stone slabs/flooring of any description laid bedded and pointed any mortar and complete all as specified and as directed.

Material and labour Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

Supply and fix marble slab baroda green 16-18 mm thick (pre grinded and polished ) bedded jointed and pointed with grey cement slurry including cutting and grinding /polished over and including 15mm in CM 1:6 bedding layer. The edges should be rounded and stone should be in one piece complete all as specified and as directed.

Material and labour for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including screed bed or bedding layer 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and as directed.

Description all as per ser No 35 but on step riser skirting over and including 10mm thick rendering in CM (1:4) complete all as specified and as directed.

Material and labour kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

Description as per ser No 37 but on step riser skirting over and including 10mm thick rendering in CM (1:4) complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed.

Dismantling of floor hearth or wall tiling including cm bedding (but not backing) removing serviceable tiles in store rubbish of the premises complete all as specified and as directed.

Material and labour vitrified ceramic tiles 8 to10 mm thick double charged/Ultra charged light shade, (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed. MAKE :- SOMANY(GRANDE VEGAS GOLD FP, DURAGRES SERIES) OR TECHNO COMMERCIALLY EQUIVALENT IN JOHNSON / KAJARIA (POLISHED SERIES) / RAK

Description all as per item No 41 above but in vertical surface/skirting set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick cement plaster (1:4) as backing coat complete all as specified and as directed. MAKE :- SOMANY(GRANDE VEGAS GOLD FP, DURAGRES SERIES) OR TECHNO COMMERCIALLY EQUIVALENT IN JOHNSON / KAJARIA (POLISHED SERIES) / RAK

Material and labour non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. MAKE :- SOMANY(REVEL LIGHT, VISTOSO SERIES) OR TECHNO COMMERCIALLY EQUIVALENT IN JOHNSON / KAJARIA (POLISHED SERIES) / RAK

Description as per item No 43 above but in skirting including set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick cement plaster (1:4) as backing coat complete all as specified and as directed. MAKE :- SOMANY(REVEL LIGHT, VISTOSO SERIES) OR TECHNO COMMERCIALLY EQUIVALENT IN JOHNSON / KAJARIA (POLISHED SERIES) / RAK

Material and labour Vitified coloured Ceramic tiles full body polish 7 to 8 mm thick (square/ rectangular) area of each tile exceeding .11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. MAKE :- SOMANY(GRANDE VEGAS GOLD FP, DURAGRES SERIES) OR TECHNO COMMERCIALLY EQUIVALENT IN JOHNSON / KAJARIA (POLISHED SERIES) / RAK

Material and labour Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar complete all as specified and as directed. MAKE :- SOMANY(REVEL LIGHT, VISTOSO SERIES) OR TECHNO COMMERCIALLY EQUIVALENT IN JOHNSON / KAJARIA (POLISHED SERIES) / RAK

Material and labour Glazed ceramic coloured tiles in vertical surface 450 X300x 6-7 mm/ 300X600x 6-7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement plaster (1:4) as backing coat complete all as specified and as directed. MAKE :- SOMANY (ELOGIO LIGHT, GLOSTRA SERIES) OR TECHNO COMMERCIALLY EQUIVALENT IN JOHNSON / KAJARIA (POLISHED SERIES) / RAK

Material and labour 25 mm thick Cement concrete in level course for receiving floor tiles using Type B1,1:2:4 (20 mm graded aggregate) complete all as specified and as directed.

Supply and fix in repairs Aluminium body, door closer hydraulically regulated designation No. 3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and as directed.

Supply and fix powder coated anodised aluminium ventilator shutters, fixed type without sash bar including stainless steel wire cloth of 0.63 mm nominal dia and average width of aperature 1.4 mm, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. and fixed to stone masonry wall including demolition of RCC jali ventilators complete all as specified and as directed.

Demolition of precast concrete block /brick work walling built in cement mortar complete all as specified and as directed.

Material and labour Precast cement concrete block masonry using type C1 1:3:6 (20 mm graded stone aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed.

Taking down cement plaster on wall /concrete surface etc including racking out joints hacking for key scrubing down with water etc complete all as specified and as directed.

Material and labour rendering 15 mm thick on faces of brick/ PCC block masonry wall using cement plaster 1:4 and rendering is to be finished even and smooth (without using extra cement) complete all as specified and as directed.

Material and labour preparation of newly plastered surface and applying two coat of cement base paint on wall etc complete all as specified and as directed.

Material and labour rendering 15mm thick on fair faces brick work /PCC block masonary or concrete surface of wall using cement mortar 1:6 and finished even and smooth (without using extra cement) complete all as specified and as directed.

Material and labour preparation of newly plastered surface and applying two coat of oil bound distemper over a coat of primer on wall etc complete all as specified and as directed.

Supply and fix in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe including bedding in cement mortor to dwarf wall ot cantilever brackets and connecting union to pipe overall size 915x460mm, bowl size 410x330x160mm complete all as specified and as directed.

Supply and fix in repair made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

Supply and fix in repair Health faucet, brass chromium plated, all as per Cat Part No BEA-95 of Prayag or equivalent makes specified in PS fixed to wall as per manufacturers instructions complete all as specified and as directed.

Supply and fix in repair Soap dish, brass chromium plated, all as per Cat Part No BA-45 of Prayag or equivalent makes specified in PS fixed to wall as per manufacturers instructions complete all as specified and as directed.

Supply and fix in repair Wall mixer, three in one, brass chromium plated, with complete accessories all as per Cat Part No PIS-70H of Prayag or equivalent makes specified in PS fixed to wall as per manufacturers instructions complete all as specified and as directed.

Supply and fix in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 500x125mm with chromium plated brass bracket all as per Cat Part No BEA-45 of Prayag or equivalent makes specified in PS fixed to wall as per manufacturers instructions complete all as specified and as directed.

Supply and fix in repair Towel ring, brass body, glossy finish complete all as per Cat No BA-02 of Prayag or equivalent make as specified in PS all as specified and directed.

Supply and fix rotational moulded polyethylene water storage tanks triple layered capacity 500 lit ( cylindrical vertical with closed top ) hoisted and fixed in position including dismantling and removing of old tank complete all as specified and as directed.

Supply and fix rotational moulded polyethylene water storage tanks 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including dismantling and removing of old tank complete all as specified and as directed.

Supply and fix in repair 20 mm dia Ball valves, high pressure with polythene float and flynut with rod complete screwed for iron pipe or brass ferrule complete all as specified and as directed. MAKE :- Prayag Cat Part No 152 or technocommercially equivalent

Supply and fix in repair fancy type MS curtain rod powder coated 20mm dia with wall thickness not less than 1mm ( of approved colour and design) including bracket (latto) and wall face support bracket fixing to walls with MS full screws (including fixing of wooden pieces of required size of walls) complete all as specified and as directed.

Taking down Chowkats or frames with shutters without taking of shutters from the frames exc 1.5 Sqm but not exc 4 Sqm each including complete all as specified and as directed.

Taking down Chowkats or frames with shutters without taking of shutters from the frames not.exc 1.5 Sqm each complete all as specified and as directed.

Taking down steel shutter with chowkhat exc. 1.00 Sqm but n.exc. 2.00 Sqm each and removing from site complete all as directed by Engineer-in-Charge.

Taking down shutter with chowkhat exc. 1.00 Sqm but n.exc. 2.00 Sqm each and removing from site complete all as directed by Engineer-in-Charge.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown on Page No. 160 of SSR 2010 part II complete all as specified and as directed.

Providing and fixing 30mm thick FACTORY MADE MOULDED DOOR SHUTTER ‐ WOOD FREE consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M. S. frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick EPS of Density 23 Kg /Cbm. bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet Manufactured by an ISO‐9001‐2015 certified company, with 2, 4, 6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and /or prelam PVC sheet on other side of the EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton ( made by sticking 2mm rigid foam PVC sheets of 5mm (±0.25) thickness using PVC solvent cement ) and stile sides 25mm (5mm x 5nos.) thick and 30mm width PVC Sheet fitted along M.S. tube for hardware provision & for lock 25mm thick ( 5mmx5nos. ) PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc. complete all as per specification & drawing and as directed by Engineer-in-charge.

Supply and fix factory made shutter 35mm thick, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

Supply and fix 35mm thick 2nd class HW glazed or skeleton shutter open rebated divided into square with plain chamfered or rounded mitred and rebated without sash bar and prepared to receive gauze or glaze, size of members as clause 8.20 (a) of SSR pt-1 complete all as specified and as directed.

Supply and fix 30mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

Supply and fix Pressed steel frames MS size 125x60mm for doors, ventilator with double rebates including necessary fixing lugs, hinges, lock strike plate etc, including Material and labour for providing PCC 1:2:4 type B1 (using 20mm graded stone agg) to fill the frame & making good complete all as specified & directed by Engr-in-Charge.

Supply and fix stainless steel 100 mm size butt hinges, medium weight complete all as specified and as directed.

Supply and fix aluminium handles 150 mm long, cast type anodised complete all as specified and as directed.

Supply and fix aluminium anodised barrel tower bolt 200mm long complete all as specified and as directed.

Supply and fix stainless steel sliding door bolts 300mm long, plate type, with stainless steel bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

Supply and fix flat iron 25x3mm thick conforming to Fe-290, Gde E-165 in hold fasts complete all as specified and as directed.

Material and labour Bib taps 15mm dia, cast copper alloy chromium plated, with CP flange all as per Prayag Cat No 7306 Tranquil series or techno commercially equivalent makes specified in PS fixed in repairs complete all as specified and as directed.

Material and labour Bib taps 15mm dia, cast copper alloy chromium plated, long body, with CP flange all as per Prayag Cat No 7308 Tranquil series series or techno commercially equivalent makes specified in PS fixed in repairs complete all as specified and as directed.

Material and labour Stop valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle,15mm bore size screwed both ends for iron pipe or for unions and fittings all as per Prayag Cat No 7326 or techno commercially equivalent makes specified in PS fixed in repairs complete all as specified and as directed.

Material and labour Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC(SWR) 'P' or 'S' trap connecting to flush pipe and to anti syphonage pipe,all as per CERA Cat No CALINA S 3010102 or techno commercially equivalent makes specified in PS. complete including making good to floor fixed in repairs complete all as specified and directed.

Material and labour brass chromium plated overhead shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union CERA Cat No F7020307 or techno commercially equivalent makes specified in PS fixed in repairs complete all as specified and as directed.

Supply and fix in repair Gun metal gate or globe valves 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Material and labour Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) all as per CERA Cat No CURTIS or techno commercially equivalent makes specified in PS fixed as in repairs, complete all as specified.

Material and labour Plastic water closet seat cover, coloured, for pedestal pan closed pattern with flat bottom,and cover with mild steel chromimium plated or aluminised hinging device complete fixed in repairs all as specified and directed.

Material and labour PVC valveless, syphonic action type, flushing cistern, 10ltr capacity,low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, all as per ESSCO Cat No. WHE-WHT-183NL or techno commercially equivalent makes specified in PS fixed in repairs complete all as specified and as directed.

Material and labour Vitreous china wash basin white flat back size 580x450 mm excluding taps but including 32 mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets all as per CERA Cat No S 2040109 or techno commercially equivalent makes specified in PS complete fixed in repairs all as specified and directed.

Supply and fix PVC connections 15mm dia with brass nut on both ends and washers 450mm long all as per Prayag Cat No 323-ZK or techno commercially equivalent makes specified in PS fixed in repair complete all as specified and as directed.

Supply and fix 15 mm bore Pillar taps, cast copper alloy fancy type, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe all as per Prayag Cat No 9302 or techno commercially equivalent makes specified in PS fixed in repairs complete all as specified and as directed.

Supply and fix Galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples including necessary beading all as directed by Engr - in - Charge.

Supply and fix in repair for Stainless Steel Jet spray(Butterfly) with 1.00 metre braided tube all as per Prayag Cat Part No.BEA-17 or techno commercially equivalent makes specified in PS complete all as specified and as directed.

Supply and fix in repair PVC (SWR) floor trap 75mm bore plain with grating including jointing with solvent cement complete all as specified and as directed.

Supply and fix in repairs towel rail of brass CP 500mm long fixed with and including chromium plated brass screws and wooden / plastics cleats (min wt 170 gms) all as per Prayag Cat No BA-01 or technocommercially equivalent make complete all as specified and directed.

Supply and fix for powder coated aluminium sliding windows having three Nos of tracks including one wire glazed shutters for mosquito proofing including stainless steel wire cloth of 0.63 mm nominal dia and average aperature 1.4 mm and two Nos glass shutters including 4mm thick coloured glass and aluminium section weight n.less than 0.55 Kg/RM including necessary cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, suitable handles, locking arrangement and fixed to stone masonry wall complete. Brown coating or any other as per directed by Engr-in-Charge

Supply and fixing powder coated aluminium door made out of hollow extruded aluminium section as mentioned below. Each door having 02 Nos disc or D type handels, 02 Nos aluminium tower bolts 200 mm size one aluminium sliding door bolt or 250mm size, one brass mortice lock of six levers with key in duplicate regulated by double action hydrolic floor door spring (Make Sandhu/TITZ) shutter to be partly glazed with 5 mm thick tinted glass and partly paneled with 12 mm thick pre laminated particle board fixed with glazing clips, rubber beading/gasket anodized aluminium beading screws complete all as specified and as directed. Chowkhat Frame : 101.60x44.45x1.55 mm Shutter verticle/stile: 85.00x44.45x1.56 mm Shutter middle rail : 83.50x44.45x1.54 mm Shutter top and bottom rail : 110x44.45x1.54 mm MAKE :- (i) Anodized aluminium section : Jindal/Hindalco, Indalco (ii) Particle board : Novapan, Duratuff (iii) Glass : Saint, Gobain, Modi Guard, TATA

Material and labour 75mm bore PVC(SWR) pipe, type 'B' single socketed in any length with rubber ring joints laid in trenches or floors fixed in repairs all as specified and as directed.

Material and labour 110 mm bore PVC (SWR) pipes, type 'B' single socketed in any length with rubber ring joints fixed to wall including PVC clamps and necessary fittings fixed in repairs complete all as specified and as directed.

Material and labour PVC (SWR) bends type 'B' of any radius, 75 mm dia complete all as specified and directed.

Material and labour PVC (SWR) bends type 'B' of any radius, 110 mm dia complete all as specified and directed.

Material and labour 75 mm bore PVC (SWR) branch piece (single Y), type 'B' equal or unequal with access door complete all as specified and as directed.

Material and labour 110 mm bore PVC (SWR) branch piece (single Y), type 'B' equal or unequal with access door complete all as specified and as directed.

Material and labour 110mm bore PVC (SWR) WC connector type 'B' any type fixed in repairs complete all as specified and as directed.

Material and labour PVC (SWR) gully trap 125/110mm setting and jointing in solvent cement complete all as specified and as directed.

Material and labour 100 mm bore cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) PVC (SWR) fixed in repairs complete all as specified and as directed.

Material and labour sunken flooring treatment as per following details complete all as specified and directed:- (a) Special treatment to toilet floor by demolition of existing treatment of any description and thickness, removal of rubbish to a distance exc. 5KM but not exc.7.5KM. (b) Clean the sunken portion of toilet / Bath / WC / Kitchen throughly to remove laitance, dirt dust, etc. (c) Form angle fillet of size 40mm x 40mm along the junction of wall and floor using polymer modified mortar ("Dr Fixit"Pidicrete URP" or equivalent as given in Appx 'C'.). (d) Sanitary pipes entering through walls and floor shall be sealed with "Dr Fixit Bathseal Tape"or equivalent as given in Appx 'C' and the gaps to be grouted with non-shrink cementitous grout "Dr Fixit Bathseal Grout" or equivalent as given in Appx 'C'. Nahani Traps, etc to be fitted securely and the gaps around it to be grouted in the same manner. (e) Apply one coat of a Bitumen-modified polymer coating "Dr Fixit Bathseal Plus" or equivalent as given in Appx 'C' on all angle fillets by brush

Supply and fixing powder coated aluminium grill of 50mm spaced design with 5-6mm thick, for aluminium door and windows at required location as directed by Engineer-in-Charge, includig all necessary fittings and screw fixed in aluminium frame of any size complete all as specified and directed.

Demolition/ dismantling of precast interlocking tiles/ paver blocks, chequered tiles of any description thickness & size complete all as specified

Material and labour for 75 mm thick PCC 1:4:8 type D2 in sub base complete all as specified and directed

Material and labour chequered cement concrete tiles rubber moulded 30cm x 30cm x 25mm thick set, jointed and pointed in near cement slurry in floors, with grey cement and pigments over and including 15 mm thick screed bedding in CM 1:6 complete all as specified and directed.

Material and labour petty repairs to leaking water in bib taps, pillar taps stop cock, angle valve, wall mixer, kitchen mixture, WHB mixer, PVC connection waste pipes, float valves, concealed stop cock, GI pipe joints bottle traps etc of any description by changing the washers, spandle etc or any other minor accessories to make the system functional complete all as specified and directed by Engr-in-charge.

Material and labour preperation of new steel surfaces of any desciption over 10 cm in width or girth not other wise descibed and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

Material and labour in repair Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as as per direction of Engineer-in-Charge.

Material and labour petty repairs to leaking water in bib taps, pillar taps stop cock, angle valve, wall mixer, kitchen mixture, WHB mixer, PVC connection waste pipes, float valves, concealed stop cock, GI pipe joints bottle traps and small fitting of galvanized iron medium grade such as socket, elbow, nipple, Tee, union, reducer etc suitable for 15mm bore pipe etc of any description by changing the washers, spandle etc or any other minor accessories to make the system functional complete all as specified and directed by Engr-in-charge.

Material and labour petty reapirs to high / low level flusing cistern by adjusting the float valve, leakage PVC connection PVC / GI bend incl replacing of rubber washer cheek nuts plunges etc for any type complete all as specified and directed by Engr-in-charge.

Easing of door shutters for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed by Engr-in-charge.

Easing of window shutters, kitchen cupboard shutters, show case shutter drawers incl fixing of screws adjusting handles, knobs tightening piano hinges incl misc small adjustments complete all as specified and directed by Engr-in-charge.

Repair to collapsible steel gate safely and refixing/resecuring it in other opening of similar size with all necessary components as required for its smooth functioning complete all as specified and directed.

M/S K.D.MATE

DARSHAN ENTERPRISES

MAHESH DADAJI BACHHAV