Maintenance and Repairing work of Type - V quarters ( Room No. 01 and 02) at Police Training school at Sayli.

Amount

Providing material and labour for fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws, with Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS :2046 Type S, including cost of adhesive of approved quality 1.0mm Thick on both face, with Providing and fixing S.S. tower bolts (barrel type) with necessary screws etc 200mm long x10mm dia, with Providing and fixing S.S. Door Aldrop with necessary screws etc. 300mm long x16mm dia, Providing and fixing S.S. Door Aldrop with necessary screws etc 250mm long x16mm dia, with Providing and fixing S.S. Pipe Handle for door 30cm size on both side of Door shutter, with Providing and fixing S.S hanging type floor door stopper with necessary screws, etc. complete as directed by Engineer in charge. All S.S Shall be ASIS 304 Grade.

Providing material and labour for Deluxe Welvet paint (two coats) of approved brand and manufacture and of required shade on wall surfaces to give an even shade after thoroughly brushing the surface and other foreign matter and also including preparing the surface even and sand parpered smooth.

Providing material and labour for applying “Apex Ultima” exterior acrylic paint on New/Old Surface of required shade on undecorated wall surface to give an even shade over and finishing smooth sand papering etc. Applying three coats of “Apex Ultima” paint after thoroughly brushing the surface free from mortar dropping and other foreign matter to make the surface smooth and one coat of water proofing cement paint of approved brand and manufacture as directed by Engineer In Charge.

Providing material and labour for Painting three coats (excluding priming coat) on previously painted steel and other metal surface with enamel paint, brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.

Providing material and labour for Painting two coats (excluding priming coat) on previously painted wood and wood based surface with enamel paint, to give an even shade including cleaning the of all dirt, dust and other foreign matter.

Providing and fixing bedrooom cup-board size 2.50 x 2.83 etc. complete as directed by Engineer-in-charge.

Providing and fixing Shoe rack (size 1.63 x 0.90) etc. complete as directed by Engineer-in-charge.

Providing material and labour for fixing of Kitchen Platform shutter etc. complete as directed by Engineer-in-charge.

Providing Termite Treatment for Building using Chloropysiphos 20% TC. The method of treatment will be as under: (i) Holes will be drilled at ground level ata distance of one foot and chemical will be injected. (ii) Complete wall spray will be carried out. (iii) All door and window frames will be treated by drilling holes at the junction of wall and frames and injecting pesticides. (iv) Outside periphery of the building will be treated by drilling holes and injecting chemical. (v) These holes will be sealed after chemical is injected. (vi) Walls upto 02 feet all around treatment will be provided. (vii) The treatment is to be carried out once in 2 years. (viii) Gearantee will be given for 2 years against free spot treatment if termites are noticed. No guarantee for wooden furniture.

Providing Termite Treatment for Outside Garden using Chloropysiphos 20% TC. The method of treatment will be as under: (i) Holes will be drilled at ground level ata distance of one foot and chemical will be injected. (ii) Complete wall spray will be carried out. (iii) All door and window frames will be treated by drilling holes at the junction of wall and frames and injecting pesticides. (iv) Outside periphery of the building will be treated by drilling holes and injecting chemical. (v) These holes will be sealed after chemical is injected. (vi) Walls upto 02 feet all around treatment will be provided. (vii) The treatment is to be carried out once in 2 years. (viii) Gearantee will be given for 2 years against free spot treatment if termites are noticed. No guarantee for wooden furniture.

Providing and fixing wsh down water closet (European type, W.C. Pan) with integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal including plastic seat cover (A) vitreous China Pattern :(i) in white colour

Providing and fixing 12.5 Litres low level flushing cistern with a pair, of C.I. or Mild brackets, complete with fittings such as lead valve less syphon, 15mm nom.nal size brass ball valve with polythene float, C.P brass handle unions and couplings for connections, with inlet, outlet and overflow pipes, 40mm dia. porcelain enamelled flush bend including cutting holes in walls and making good the same connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) (A) Vitreous China (I) In white colour

Providing and fixing screw down bib taps of following size.(A) Brass screw down bib tap polished bright. (ii) 20mm dia.

Providing and fixing brass screw down stop tap.(B) 20mm dia.

Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy erected on existing hook or clamp with earthing. [Make shall be approved by Engineer in charge]

Supplying & erecting approved make low noise decorative exhaust fan having size 200mm with 1350 RPM with square frame ABS body with inbuilt lowers & square frame.

Supplying and erecting approved make Instantaneous type water heater with 3Itr.capacity rust free container housed in ABS plastic body insulated with glass wool / puff insulation and 3 Kw heating elements,adjustable thermostat 300 C to 850 C with set to operate at 850 C (+ /-60 C ) auto reset indication lamps, thermal cut-out, safety valve fusible plug etc.

Supplying & erecting 5 stage single reverse osmosis water purification system with M.S. powder coated frame, prefilter housing with 'O' ring presediment filter GAC filter, carbon filter suitable buster DC pump capacity 80 psi, mention with 40 psi inline type post carbon filter auto low & high pressure switches with following size of storage tank & LPH capacity & erected as directed with one year comprehensive maintenance guarantee.

Dharmik construction