Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 01₹7.4 LAccepted-AOC | 01 | Accepted-AOC AWARD | |
| 2 | Not Admitted-Finance | - | Not Admitted-Finance Not qualified for AOC |
Tender Value
₹7.4 L
EMD Value
₹14,879
Closing Date
15 Jul 2021, 5:00 pmClosed
EXECUTIVE ENGINEER 2
WATER SUPPLY AND SANITATION DIVISION NO 2 PATHANKOT
PROVIDING AND INSTALLING TUBEWELL NEW PUMPING MACHINERY ETC AT TESHIL OFFICE BAMAIL BLOCK BAMIAL DISTT PATHANKOT UNDER MINING HEAD
2021_WSS_68117_1
CIVILWORK_2020_21_23
Open Tender
Civil Works
Item Rate
90 days
DAC MALIKPUR
Please refer Tender documents.
2 documents required · 2 mandatory
₹100
₹14,879
Yes
11 Aug 2021
7 Jul 2021
16 Jul 2021
7 Jul 2021
15 Jul 2021
7 Jul 2021
Amount
Drilling Bore well of 7" i/d (175mm dia) by using ODEX (Tubex)/DTH / Any method as per site conditions, complete in all respect 0 mtr. to 70 mtr
Supplying and lowering of 125mm i/d MS pipe 5.40mm thick
Supplying, lowering of 125mm L.C.G strainer with M.S socket to connect strainder to strainer duly welded with suitable grade S.S welding electrode, complete in all respects to the satisfaction of Engineer-in-charge 5" (125mm) i/d 5.00mm thikness slot size 0.15 to 0.25mm (to be confirmed as per sieve analysis)
Supplying & fixing of M.S Clamp of size 125mm x 12mm made out of MS Flat 1.52m long, suitable to fit Housing pipe including the cost Nut & Bolts of Suitable size complete in all respect
Supplying & Fixing of well cap having thread to fix on housing pipe complete in all respect. 125mm internal diameter
Development of bore hole and yield testing with air compressor and subsequently with submersible pumping set etc.
Supplying and Fixing of bail plug or M.S. pipe complete with inverted U-hook attached to the bottom plug complete in all respect. 125 mm internal diameter 5.4 mm thickness
Collection of water sample and testing of sample from approved laboratary (Physical & chemical Analysis)
Testing of water sample for heavy metal testing from approved laboratory (Toxic material such as Arsenic, lead, mercurty, pesticide etc)
Provision for supply of single phase power connection from the nearest electric pole
Providing and fixing Volt Stablizer (LS)
Providing & Installing, testing, commissioning one no 2.00 BHP Set electrical driven pump set of suitable capacity conforming to relevant I.S. specification capable of delivering 1 to 2.5 LPS discharge at 150 mtr. head including cost of accessories such as control panel. Volt meter, Amperemeter, MCB, starter
Rate of Motor Pump
Panel Board
Submersible cable size 2.50mm 2 make L&T or Finolex
Column Pipe (G.I) 40 mm i/d
Disinfection Unit: Providing Installing testing and commissioning and one no. electronically actuated, diaphragm operated, metering system, chemical dosing chlorinator, suitable for delivering 0.5 to 6 leter of bleaching powder solution/ sodium hypo solution per hrs under maximum deliver pressure upto 7kg/cm2 and suction left not less than 1.5 meter. (Milton roy or Equivalent make)
Making Connection with existing pipe line including cutting cost of D-Joint, labour for fixing specials excavation bailing out etc
Providing and laying, jointing, fixing, testing ISI marked G.I Pipe (as per IS 1239) B-Class Premium make such as (Jindal, Hissar) including cost of specials such as tees, bends, sockets elbow etc cutting, threading in trenches inside building complete.
Providing & fixing in position Water Cooler without Stablizer of approved make (to the approval of Engineer-in-charge ) including carriage complete in all respect.
Water Cooler Full Steel Body 40/80 ltr Capacity without Stablizer
AUTOMATIC VOLTAGE STABLIZER: Automatic Voltage Stablizer 2 KVA
Providing & fixing in position UV filter having flow rate 200 ltr/hr with 3 stage purification process having 16 watt UV lamp and 35 Watt power rating of approved make (to the approval of Engineer-in-charge ) including carriage and fixing in position complete in all respect.
Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer - in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank.
Triple Layer Tanks
Providing and fixing in position 15mm C.P. Pillar cock foam flow of approved make (to the approval of Engineer-in-charge)
Dismantling brick work tile, masonry or tile lining
In cement
First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.
12.5 mm thick cement plaster 1:4
White washing (two or more coat)
Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect.
Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. 7mtrx5mtr
Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. 1.29mtrx2.5mtr
Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete.( Design is homogenous throughout the tile body ).
Size 600x600 mm
Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.
Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect.
Urinal Waste pipe
Wash Basin Waste pipe
Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete
Doors and windows frame of size 118mm x 60mm with 40 mm wide single rebate weighing 3.43 kg per meter. Size 0.90x2.13 mtr
Cleaning of Toilets, bathroom and septic Tank with material and 2 persons labour charges complete in all respect.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .