Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.6 LAccepted-AOC WZ 831 NANGAL RAYA PANKHA ROAD NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | L1 | Accepted-AOC Being L1 Bidder | |
| 2 | L2₹29.4 L+₹61,644 (2.14%)Rejected-Finance 1 225 5 6 SADAR BAZAR DELHI CANTT 110010 | NEW DELHI | DELHI | 110010 | L2 | Rejected-Finance OTHER THAN L1 | |
| 3 | L3₹30.7 L+₹1.9 L (6.77%)Rejected-Finance RZ 140 A EAST SAGARPUR STREET NO 7 8 NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | L3 | Rejected-Finance OTHER THAN L1 | |
| 4 | L4₹31.6 L+₹2.8 L (9.77%)Rejected-Finance JYOTI BAKERY 1ST FLOOR A5 HSEDRI G RZA 5 PALAM NEW DELHI SOUTH WEST DELHI DELHI 110045 | NEW DELHI | SOUTH WEST DELHI | DELHI | 110045 | L4 | Rejected-Finance OTHER THAN L1 | |
| 5 | L5₹33.1 L+₹4.3 L (14.9%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN L1 |
| Sl No | Description | Qty | Unit | Deven Associates L3 | B.R. Enterprises L6 | Tushar engineers L1 | Akarsha Enterprises L5 | jain associates L7 | HSEDRIG ENGINEERS AND CONTRACTORS L4 | M P TYAGI ENGINEERS AND CONTRACTORS L2 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 metre depth and getting out in any type of soil for taking out/laying of pipe complete all as specified and as directed | 570 | CUM | 99 ₹56,430 | 90 ₹51,300 | 88 ₹50,160 | 100 ₹57,000 | 90 ₹51,300 | 100 ₹57,000 | 49 ₹27,930 Lowest |
| 2.00 | Returning filling in, including spreading, leveling, watering and well ramming in layers not exc. 25 cm thick complete all as specified and directed. | 513 | CUM | 9 ₹4,617 Lowest | 25 ₹12,825 | 48 ₹24,624 | 80 ₹41,040 | 90 ₹46,170 | 50 ₹25,650 | 19 ₹9,747 |
| 3.00 | Removal of excavated material from site to a distance not exceeding 50 meters away and depositing where directed at a level not exceeding 1.5 meters above the starting point complete all as specified and directed. | 57 | CUM | 39 ₹2,223 | 25 ₹1,425 | 112 ₹6,384 | 50 ₹2,850 | 95 ₹5,415 | 40 ₹2,280 | 19 ₹1,083 Lowest |
| 4.00 | Excavation in trenches by cutting of road crossing, PCC hard standing for taking out/laying of pipe lines including PCC (1:2:4) type B-2 (with 40 mm graded aggregate) in foundations,filling and mass concrete complete including making good the existing surface all as specified and directed. | 0.5 | CUM | 299 ₹149.5 | 2,000 ₹1,000 | 2,355 ₹1,177.5 | 500 ₹250 | 1,860 ₹930 | 500 ₹250 | 199 ₹99.5 Lowest |
| 5.00Taking up GI/CI/MS Pipes including all fitting of the following sizes as specified and directed by Engineer-in-Charge :- | ||||||||||
| 5.01 | 80 mm bore | 110 | RM | 9 ₹990 Lowest | 35 ₹3,850 | 9 ₹990 Lowest | 20 ₹2,200 | 30 ₹3,300 | 25 ₹2,750 | 9 ₹990 Lowest |
| 5.02 | 100 mm bore | 660 | RM | 12 ₹7,920 | 40 ₹26,400 | 11 ₹7,260 | 20 ₹13,200 | 30 ₹19,800 | 30 ₹19,800 | 9 ₹5,940 Lowest |
| 5.03 | 150 mm bore | 385 | RM | 15 ₹5,775 | 45 ₹17,325 | 13 ₹5,005 | 25 ₹9,625 | 60 ₹23,100 | 30 ₹11,550 | 9 ₹3,465 Lowest |
| 5.04 | 200 mm bore | 99 | RM | 19 ₹1,881 | 50 ₹4,950 | 38 ₹3,762 | 30 ₹2,970 | 90 ₹8,910 | 30 ₹2,970 | 9 ₹891 Lowest |
| 6.00Supply, laying jointing, testing of DI pipe with class-K-7 spigot socketed ends, conforming to IS-8329 laid in trenches including providing route indicators of suitable height and laying at spacing of @ 50m center to center at GL mentioning name of contractor, date of execution & CA No with name of work & rubber gasket (Tyton) joints with jointing material & route indicators of the following sizes including taking down of existing CI/DI pipe complete all as specified and directed by Engineer-in-Charge. Note 1: - Excavation & earth work shall be measured and paid seperately under respective items of BOQ. Note 2:- Contractors will provide route indicators mild steel body with top 150 mm plate 3mm thick and height not less than 300mm above finished GL at suitable intervals as directed by EIC. Cost of route indicators shall be deemed included in quoted unit rates. Note 3:- Layout plan for laying of DI pipe shall be given by EIC in writing. Note 4 :- Cost of Rubber gasket joints (Tyton Joint) included in quoted unit rates. | ||||||||||
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
19 Nov 2025, 6:00 pmClosed
GE(U)(W/S) DELHI CANTT
GE(U)(W/S) DELHI CANTT 110010
REPAIR/MAINTAINANCE/REPLACEMENT OF WATER PIPE LINE AT MOUDE ROAD AREA, ARJUN VIHAR, CARRIAPPA VIHAR AREA, PRATAP CHOWK, KHYBER LINES, MANEKSHAW CENTRE PUMP HOUSE, BAIRD PLACE IN THE AREA OF AGE(U) WATER SUPPLY NO-II, UNDER GE(U) WATER SUPPLY
2025_MES_737495_1
GE/WS/Token No-47 OF 2025-26
Open Tender
Civil Works
Item Rate
180 days
GE(U)(W/S) DELHI CANTT
AS PER NIT AND TENDER DOCUMENTS
6 documents required · 6 mandatory
₹500
GE(U)(W/S) DELHI CANTT
₹96,000
3 Jan 2026
29 Oct 2025
21 Nov 2025
29 Oct 2025
19 Nov 2025
13 Nov 2025
Amount
Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 metre depth and getting out in any type of soil for taking out/laying of pipe complete all as specified and as directed
Returning filling in, including spreading, leveling, watering and well ramming in layers not exc. 25 cm thick complete all as specified and directed.
Removal of excavated material from site to a distance not exceeding 50 meters away and depositing where directed at a level not exceeding 1.5 meters above the starting point complete all as specified and directed.
Excavation in trenches by cutting of road crossing, PCC hard standing for taking out/laying of pipe lines including PCC (1:2:4) type B-2 (with 40 mm graded aggregate) in foundations,filling and mass concrete complete including making good the existing surface all as specified and directed.
Taking up GI/CI/MS Pipes including all fitting of the following sizes as specified and directed by Engineer-in-Charge :-
80 mm bore
100 mm bore
150 mm bore
200 mm bore
80 mm bore
100 mm bore
150 mm bore
200 mm bore
Material and Labour for DI fittings/specials such as Tees, bends (any type, radius and angle) tapers any type, collars, tail pieces, caps and plugs upto 300 mm dia sizes confirming to IS: 9523 complete all as specified and directed by Engr-in-Charge.
Material and labour for Rubber Gasket Joint (Tyton Joint) including jointing material for DI/CI pipe of following size/bore :-
80 mm bore
100 mm bore
150 mm bore
200 mm bore
Material and labour including jointing and testing of cast iron sluice valves class PN-1.0 PD short body, conforming to IS:14846-2000, flanged ends drilled having stainless steel spindle with cast iron wheel at top complete with nuts, bolts, washers and rubber gaskets including taking out unserviceable sluice valve and removal from site for the follwing sizes complete all as specified and directed. Note- (i) Flanged joints complete with jointing material shall deemend to be included in the unit rate of this item.
80 MM bore
100 MM bore
150 MM bore
200 MM bore
Supply , fixing, jointing and testing in replacement of Cast Iron Non-Return Valve without bypass arrangement, swing type, confirming to IS-5312, flanged ends pressure rating PN 1.0 including taking out old unsv NRV from the existing place of following sizes:- Note:- (i) Flanged joints complete with jointing material shall deemed to be included in the unit rate of this item. (ii) Genuine PV's & MTC of vavle be produced by contractor alongwith RAR for payment.)
80 mm dia
100 mm dia
150 mm dia
Material and labour for run lead joint including jointing material for cast iron pipe of following size/bore :-
80 mm bore
100 mm bore
150 mm bore
200 mm bore
Taking up old GI steel tubing with connection including fittings all as specified and as directed by Engineer-in-Charge of the follwing sizes :- (Note:- Excavation and earth work will be measured and paid separately).
15 MM bore
20 MM bore
25 MM bore
40 MM bore
50 MM bore
Supply & Laying of GI pipe "medium grade" ISI mark including all fittings in old/new positions in trenches/wall/floor complet and making good the distributed surfaces as per existing as directed of following sizes. (Note:- Excavation and earth work will be measured and paid separately).
15 MM bore
20 MM bore
25 MM bore
40 MM bore
50 MM bore
S&F Gun metal gate valve with iron wheel head screwed both iron iron pipe ISI Marked as per IS 778 of following sizes including taking out unserviceable gate valve complete all as specified and directed :-
15 MM bore
20 MM bore
25 MM bore
40 MM bore
50 MM bore
Supply and installation of flanged ends strainer/dirt box, PN-10 with stainless steel mesh suitable for water meter for potable water supplies on up stream of water meter to avoid foreign material entering into meter including taking out unserviceable of following sizes complete all as specified and as directed at site by the Engineer-in-Charge.
80 mm bore
100 mm bore
150 mm bore
200 mm bore
Supply and installation of flanged ends Water Meter woltman type, including testing and making good connection with flanged ends, with gasket rubber sheet and nut & bolts etc ISI Marked fixing in horizontal/incline/vertical position, including taking out unserviceable of following sizes complete all as specified and as directed at site by the Engineer-in-Charge.
100 mm bore
150 mm bore
200 mm bore
Supply and Fixing in replacement of CI Foot valve of following size , Flanged ends, Swing type opration with rubber sheet as per IS-4038 including taking out unserviceable of following sizes complete all as specified and directed by Engineer-in-Charge. Note (i) :- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this items.
100 MM bore
150 MM bore
Construction of valves pit chamber having internal dismention 900mm x 900mm x 900 mm (internal height) using PCC (1:4:8)40 mm graded stone aggregate for foundation 15 cms thick, 23 cm thick wall in CM (1:4) 10 mm thick rendering all around the brick work with 1:6 cement mortar PCC (1:2:4) type B1 coping with 20mm graded aggregate for grouting MS frame including 3mm thick MS top sheet cover with locking arrangement including 50 mm pad lock with double key angle iron including painting of steel surface with two coats of synthetic enamel paint over a coat of red oxide primers including necessary excavation in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as specified and as directed by the Engineer-in-Charge
Supply & Fix float valve high pressure of PTMT with epoxy coated Aluminum rod and High density plastic Ball screwed for iron pipe , including taking out float valve of following sizes complete all as specified and directed by Engineer-in-Charge.
15 MM bore
20 MM bore
25 MM bore
Supplying, laying, jointing, welding and testing MS Pipe (Heavy class 'C') IS : 1239/3589, of followiing sizes 8mm thick laid in trenches or in Horizontal/Vertical/inclined position or laying on floors for connections for suction, to header and connected to out going water main CI/DI pipe line, for following size including taking out the old unserviceable pipes :- (Note:- (i) MS Flanges incl fabrication work will be measured and paid separately. (ii) Excavation and earth work will be measured and paid separately.
80 MM bore
100 MM bore
150 MM bore
Supply and fixing in replacement of MS flange of following sizes ,16mm thick
80 MM bore
100 MM bore
150 MM bore
Material and labour for painting two coat of synthetic enamel paint as per existing pattern on pipe surface/header connection including preparation of surfaces by scratching and removing the rust, applying one coat red oxide primer complete all as specified and as directed
M&L for removing weeds and wild grass inside the installations using chemical spray and trimming trees and unwanted plants using petrol operated Tree/Grass cutting tools and dressing of the surface by scrapping high patches and filling low patches with the scrapping soil to give an even and neat look to the site and disposing off all the unwanted grass, bushes and debris all as directed by the Engineer-in-Charge.
Material and labour for MS works of any sizes of angles irons/flat iron/MS sheet works for U/S Sumps for making grills and stair steps etc. complete all as specified and directed by engr-in-charge
Demolation in concrete cement in ground floors and paving(Road cutting) not exc 15cm thickness (Below or above the ground level) all as per specified and as directed.
M & L for PCC (1:3:6) type C2 using 40mm graded aggregate as in foundation for including fair finish even and fair to exposed surfaces without using extra cement complete all as specified and as directed
Demolition of brick work or stone/boulder masonry built in cement mortar including all quoin jambs pillars etc.
M&L brick work with subclass B bricks straight or curved on plan exc. 6m mean radious in full brick wall thickness (23 cm) walls built in cement mortar (1:4) complete all as directed and specified by Engr-in-charge
M&L Rendering 10 mm thick with cement plaster (1:4) on brick walls for finishing the surface fair and even complete all as specified and directed by engr-in-charge
M&L Machine pressed precast concrete interlocking paverblocks any shape and size confirming to IS 15658-2006 of 60 mm thick, M-40 Grade with grey cement and no pigments, over 25 mm thick sand cushioning complete all as specified and as directed.
S & F MS Pipe header as per IS 3589, 100mm dia 6mm thick, 05.00 mtr (2.50 mtr + 2.50 mtr) in length flanged ends closed with dead plate both ends not less than 16mm thick , rubber gasket, nut,bolt, washer including provision of following incoming & outgoing connection of MS pipe , heavy duty , Class 'C' of size 100mm with two coats synthetic enamel paint over one coat of red oxide primer, including appropriate foundation/Support for header, connection of exisitng supply line & pump to new header all as specified and directed by engineer-in-charge including taking out old, rusted MS header 80mm bore complete all as specified and as directed by EIC alongwith following accessories:- (Note :- Incomer & Outgoing detais are as under) 50 mm dia Incoming - 06 Nos 50mm dia outgoing - 06 Nos Butterfly valve 100mm- 4 Nos Gun metal Ball valve 50mm - 12 Nos Pressure gauge & switch - 02 Nos Note:all connected item of header shall deemed to be included in quoted unit rate
Supplying and fixing in replacement of Digital water level indicator for under ground/Semi underground water tank reservior in multistage (10 stages) length & features of alarm on low and high levels with indications including required cable to make it fully serviceable/funcional as directed by Engf-in Charge. Note:all connected item of indicator shall deemed to be included in quoted unit rate
M & L for Repair/Replacement of CF Series Cartridge Filter & V Series Top Mounted Sand filter by EMAUX Water Technology and 1/1.5 Hp Motor & its pannel at manekshaw centre as mentione below:- CF25 filter - 03 Nos, CF50 filter- 02 Nos, CF100 filter- 01 Nos, Multiport valve(40mm) suitable for V series Sand filter - 06 Nos Pressure Gauge suitable for Multiport valve - 06 Nos 500mm Dia New Filter with sand Media - 01 Nos Lateral Suitable for above filter - 12 Nos UV resistant PVC pipe & fittings of 40mm - as per site requirement. Repair/replacement of 1/1.5Hp Pump-motor, Cable & starting panel Set - 06 Nos Note:all connected item of filters,panel & motor shall deemed to be included in quoted unit rate
An amount of Rs 2,14,275.00 shall be deducted from BOQ on account of schedule of credit
M P TYAGI ENGINEERS AND CONTRACTORS (BID ID -3478069)
Deven Associates (BID ID -3476800)
HSEDRIG ENGINEERS AND CONTRACTORS (BID ID -3477695)
Akarsha Enterprises (BID ID -3478092)
B.R. Enterprises (BID ID -3476906)
jain associates (BID ID -3477679)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.47 MB
tender47.pdf
Tender Documents • 0.78 MB
BOQ_825780.xls
BOQ • 0.39 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .