ANAVASIYE ANURAKSHAN MAD KE ANTARGAT COLLECTRATE FARRUKHABAD BHAWAN KI REPAIR WORK

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor to vth level in Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 6.4.1 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable)

12mm Plaster in 1:4 cement fine sand mortar including all material, labour T&P, curing etc complete. (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable)

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. DSR No. 11.37A (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable)

Renewing glass panes, with wooden fillets wherever necessary. Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) DSR 14.6.2 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable)

Grading roof for water proofing treatment with Cement mortar 1:3 (1 cement : 3 coarse sand) dsr No. 22.14.2 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable)

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws DSR No. 9.20.1 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood DSR NO. 9.1.1 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable)

5 mm thick solid foam PVC panel of required size with moulded/ extruded beading of appropriate design shape and size as per manufacturer’s specifications ( to secure the panel insert tight in place within the style and rails of shutter) matching the colour and shade of shutter frame. Decorative type. DSR No. 9.124.2 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable)

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. DSR No. 16.83 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable)

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density as per MORD specification 401 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable)

Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost). DSR No 16.84 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable)

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern DSR 16.91.2 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable)

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps DSR No. 17.7.30 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank DSR No. 18.48 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable)

Providing and fixing brass bib cock of approved quality (15 mm nominal bore) DSR No. 18.15.1 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable)

Providing & Fixing 1.50 HP Submersebil Pump for ISI Marka (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable)

Providing & Fixing of All Senetary work with CPVC pipe (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable)

Please Enable Macros to View BoQ information