GE AF/AMB-41/2022-23 REPAIRS AND MAINTENANCE OF STEEL FURNITURE AND MISC / TP FURNITURE INCLUDING PAINTING FOR SITE-II, III, IV AND 260SU PATIALA AND AF STATION AMBALA UNDER GE (AF) AMBALA

Amount

ALMIRAH LARGE STEEL WITH SHELVES FD-67 (M)/ FD-1031: - M&L for carrying out repair and replacement of the following parts of almirah large steel with shelves as per drg.

S&F legs base in "U" shape made out of 1.25 mm thick PBI sheet welded with electric welding machine to match with existing.

S&F MS rod for locking device 10 mm dia as per required shape & size

S&F shelves made out of 1.00 mm thick MS sheet over all size 485 x 920 mm.

S&F in replacement CP handle as per existing pattern and design of Almirah all as directed and specified by GE/Engr-in-Charge.

S&F in replacement 3 way lock, 4 levers with duplicate keys MAKE : HARRISON/GODREJ and other standard makes as approved by GE all as directed and specified.

S&F MS cleat for shelves made out of 1.00 mm thick MS sheet

S&F key hole cover outer best quality approved by GE

S&F key hole cover inner side made out of 1.00 mm thick MS sheet

After the removing of old paint, dent, rust (by emery paper) and prepaired whole surface of almirah large steel for painting, then apply one coat of red oxide paint inner & outer, then after apply one coat of spray painting to almirah large steel inner and outer surface with synthetic enamel paint olive green (Make: Asian Berger) complete all as per drg.

LOCKER BEDSIDE STEEL FD-1029: - M&L for carrying out repair and replacement of the following parts of LOCKER BEDSIDE STEEL with shelves as per drg.

S&F legs base in "U" shape made out of 1.25 mm thick PBI sheet welded with electric welding machine to match with existing.

S&F Aluminium hasp and staple of size150mm

S&F shelves made out of 1.00 mm thick MS sheetsize as per drawing

S&F in replacement CP MS handle of size 100mm as per sample

S&F door shutter made out of 1.00 mm thick MS sheet size as per drawing

S&F MS cleat for shelves made out of 1.00 mm thick MS sheet

After the removing of old paint, dent, rust (by emery paper) and prepaired whole surface of Locker bedside steel for painting, then apply one coat of red oxide paint inner & outer, then after apply one coat of spray painting to almirah med steel inner and outer surface with synthetic enamel paint olive green (Make: Asian Berger) complete all as per drg.

ALMIRAH MED STEEL WITH SHELVES FD-243/1032: - M&L for carrying out repair and replacement of the following parts of almirah small/med steel with shelves as per drg.

S&F legs base in "U" shape made out of 1.25 mm thick PBI sheet welded with electric welding machine to match with existing.

S&F MS rod for locking device 10 mm dia as per required shape & size

S&F shelves made out of 1.00 mm thick MS sheet over all size 440 x 765 mm.

S&F in replacement CP MS handle as per existing pattern and design to any type of Almirah all as directed and specified by GE/Engr-in-Charge.

S&F in replacement 3 way lock, 4 levers with duplicate keys MAKE : HARRISON/GODREJ and other standard makes as approved by GE all as directed and specified.

S&F MS cleat for shelves made out of 1.00 mm thick MS sheet

S&F key hole cover outer best quality approved by GE

S&F key hole cover innermade out of 1.00 mm thick MS sheet

After the removing of old paint, dent, rust (by emery paper) and prepaired whole surface of almirah large steel for painting, then apply one coat of red oxide paint inner & outer, then after apply one coat of spray painting to almirah med steel inner and outer surface with synthetic enamel paint olive green (Make: Asian Berger) complete all as per drg.

FORM WITHOUT BACK FD-77/ FD 1027 : - M&L for carrying out repair and replacement of the following parts of form without back all as shown on drg and as directed by Engr-in-Charge.

Removing the existing userviceable broken seat plank and supply & fix new 2nd class hard wood (Bijasal/Hollock) seat plank of size 255x1525mm thick fixed to steel frame with GI nut/bolt & washer and duly polished with french polish glosy fensh of adequate size of all as shown on drg and as specified and directed by Engr-in-Charge.

S&F of legs made out of 25mm square conduit 16 gauge including cutting, welding to required length as specified and directed by Engr-in-Charge.

All as per item No. 31 here-in-before but for stiffner

S&F of rubber shoe for leg

Point welding as required

Preparing of steel surface of form without back and applying one coat of synthetic enamel paint of required colour all as specified and directed.

TABLE OFFICE CLK STEEL FD-84 (M)/ FD1004: - M&L for carrying out repair and replacement of the following parts of table office clerk steel as per drg.

Supply & fix top of the table made out of 18/19mm thick ply wood BRW grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer all as shown in drg and as directed by Engr-in-Charge.

Supply & fix drawers of table made out of 1 mm thick MS sheet over all size of drawer 350x430 mm & 410 mm deep duly painted with a coat of pink primer all as shown in drg and as directed and specified.

S&F of back of box of table made out of 1.00 mm thick MS sheet duly painted with a coat of pink primer all as shown in drg and as directed and specified.

Supply and fix side of box of table made out of 1.00 mm thick MS sheet duly painted with a coat of pink primer all as shown in drg and as directed and specified.

S&F Drawer lock with duplicate keys make apporved by GE

S&F of leg made out of 25 mm square conduict 16 gauge include cutting welding to requied length of adequeate size of all as shown on drawing and as as specified and directed by Engr-in Charge.

S&F of rubber shoe for leg

After the removing of old paint, rust (by emery paper) and prepaired whole surface of table office clerk steel for painting, then paint one coat of red oxide paint, then after apply one coat of synthetic enamel paint as per required colour (Make: Burger Asian) all as per directed by Engr-in-Charge.

TABLE OFFICE OFFICERS STEEL FD-84 (M)/ FD 1003: - M&L for carrying out repair and replacement of the following parts of table office officers steel all as shown on drg and as directed by Engr-in-Charge.

S&F in replacement of table top made out of 18/19mm thick ply wood BRW grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer all as shown in drg and as directed by Engr-in-Charge.

S&F of drawer of table made out of 1 mm thick MS sheet, over all size drawer as per drawings duly painted with a coat of pink primer all as shown in drg and as directed and specified.

S&F of shutters to the box fabricated out of 1mm thick MS sheet duly painted with a coat of pink primer all as shown in drg and as directed and specified.

S&F of back of box of table made out of 1.00 mm thick MS sheet duly painted with a coat of pink primer all as shown in drg and as directed and specified.

S&F of side of box of table made out of 1.00 mm thick MS sheet duly painted with a coat of pink primer all as shown in drg and as directed and specified.

S&F Drawer lock with duplicate keys make apporved by GE

S&F of rubber shoe for leg

After the removing of old paint, rust (by emery paper) and prepaired whole surface of table office officers steel for painting, then paint one coat of red oxide paint, then after apply one coat of synthetic enamel paint as per required colour (Make: Burger Asian) all as per directed by Engr-in-Charge.

TEAPOY VERADAH FD-255 : - M&L for carrying out repair and replacement of the following parts of teapoy verandah as per drg.

Supply & fix MS conduit 12 mm bore as in short runner of Teapoy verandah by welding duly painted with a coat of pink primer after dismantling old broken/ unserviceable runner all as shown on drg and as specified and directed

All as per ser item No. 55 here in before but long runner.

Supply & fix top of the teapoy verandha made out of 18/19mm thick ply wood BRW grade of approved make confirming to IS with 1mm thick laminated sheet white at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer of teapoy verandah after dismantling old damaged/unserviceable top all as shown on drg all as specified and directed by Engr-in-Charge.

S&F of rubber shoe for leg

After the removing of old paint, rust (by emery paper) and prepaired whole surface of teapoy verandah for painting, then paint one coat of red oxide paint, then after apply one coat of synthetic enamel paint white (Make: Burger Asian) all as per directed by Engr-in-Charge.

RACK SIDE STEEL WITH TRAY FD-97 (M) : - M&L for carrying out repair and replacement of the following parts ofRack side sttel with tray 3 spaces for re-assembling with new parts/components as per required size and shape all as shown in drg.

S&F of shelves made out of 1.25 mm thick PBI Sheet Size 685 x 255mm

Points welding as required

Applying two coats of 1st quality synthetic enamel pant colour OG/Grey ( Make Asian/Berger/Shalimae) as approved oer a coat of zinc primer yellow extenal and internal by spray machine after preparation of surfaces.

RACK SHOE STEEL FD/E6/MAP/02/R : - M&L for carrying out repair and replacement of the following parts of rack shoe steel as per drg.

Repair to the rack shoe steel and welded wherever required. remove dents & rust of whole rack and making it servicable and applying a coat of on whole surface synthetic enamel black paint (Make: Asian Berger) and rubber shoes complete all as per drg where ever required all as diected and specified.

S&F jali shelves made with 3mm dia ms rod welded to frame all as per detail shown in drg and all as directed by Engr-in-charge.

S&F Hard rubber shoe best qulaity as per existing size and shape

CHAIR TUBLAR STEEL WITH ARM FD-75 (M): - M&L for carrying out repair and replacement of the following parts of chair tublar steel with arms as per drg.

S&F Arm wooden made out of 1st class hardwood (Teak) painted by black synthetic enamel paint glosy finished as per drg.

S&F Seat frame including canning as per 'Godrej' pattern

S&F Back frame including canning as per 'Godrej' pattern

S&F MS Machine screw with bolt, 50mm to 65mm long 3mm to 5mm dia with washers as required

Cutting the existing damaged portion of conduit pipe and welding by providing 20mm dia conduit pipe 18 gauge (approx 250mm long) bend to standard size complete all as directed by Engineer-in-Charge

S&F MS flat iron 25x3mm, 50mm long for fixing back frame/seat frame by gas welding to steel frame of chair for support all as directed by Engr-in-Charge

After the removing of old paint, rust (by emery paper) and prepaired whole surface of chair tubuler steel with arm for painting, then applying one coat of red oxide primer, then after apply one coat of synthetic enamel paint olive green (Make: Berger/Asian) all as per directed by Engr-in-Charge.

S&F of PVC rubber shoes for leg and cap for top

CHAIR VERANDAH FD-256: - M&L for carrying out repair and replacement of the following parts of chair verandah as per drg.

S&F leg made out of 20 mm dia conduit pipe 16 gauge of size 1250 mm long

S&F stiffner made out of Mild Steel Rod 10 mm dia, 460 mm long

S&F hard rubber shoe best quality as per existing size and shape

After the removing of old paint, rust (by emery paper) and prepaired whole surface of chair varandahview to position shall be painted with two coats of white enamel paint over a coat of primer (Make: Berger/Asian /salimar) all as shown in drg./ directed by Engr-in-Charge.

Removing existing old worn out nylon tape/cane from chair verandah and reweaving the chair with new 04 mm thick oval shape of white colour best quality cane (Make: Shah Premier all as per drg and as directed by the Engr-in-Charge

COMPUTER CHAIR/REVOLVING CHAIR FD/E6/MAP/01/TP: M&L for carrying out repair,/replacement of the following parts and supply & fix of new parts as under of Computer Chair as per drg & as per the direction of Engr-in-charge.

S&F in replacement of 50mm thick high density foam cushion (Make: Sleepwell/Feather Foam/Cool Foam) for seat of size 425x400mm, edges trimmed complete all as shown on drawing duly covered with good quality tapestry cloth as per approved by GE/Eng-in-charge.

S&F in replacement of All as per item No.84 here-in-above but for back including 6mm thick foam cushion (HD) lining on back side of chair computer of size 400x300mm edges trimmed complete all as per drawings and as directed by Engineer-in-Charge.

S&F in replacement of Seat made out of 9mm thick curved ply wood (5 ply) BWR grade ISI marked of size 425x400mm.

S&F in replacement of Back made out of 9mm thick curved ply wood (5 ply) BWR grade ISI marked of size 400x300mm.

S&F in replacement of handle as per existing size and shape (as per sample)

S&F in replacement of Hydrulic as per existing size and shape (as per sample)

Point welding to various parts as required.

S&F in replacement of Castor wheel paddestal as per existing size and shape (as per sample)

Applying one coats of 1st quality synthetic enamel paint colour OG/Black by spray machine after preparation of surface complete on existing frame work of computer chair complete all as directed by Engr-in-charge.

CHAIR SCHOOL WITH HAND BOARD FD/E6/MAP/05: M&L for carrying out repair and replacement of the following parts of chair school with hand board. Removing carefully the existing unserviceable/damaged parts of chair school with hand board and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as directed by Engr-in-charge

Openable (Hinged on RHS) table top to slide on rod for adjustment

18mm thick plywood BWR Gde with 1mm laminated seat board on top openable withteak wood edging of size 300x585mm

One piece PVC back and seat Make : Blowplast/Neelkamal/Suprime

Basket made out of 5mm dia mild steel wire welded to frame of chair

S&F hard rubber shoe best quality as per existing size and shape

M&L Applying one coats of 1st quality synthetic enamel paint (Black of chair school with hand board) as approved over a coat of pink primer (yellow) by spray machine after preparation of surface complete.

RACK STEEL ADJ 6 TIER 1905mmx915mmx305mm FD-106 (M): - M&L for carrying out repair and replacement of the following parts of rack steel adj 6 tier for re-assembling with new parts/components as per required size and shape all as shown in drg to match with existing all as per directed by Engr-in-Charge.

S&F in replacement of shelves with nut and bolt/welding where ever required all as diected and specified as per drawing .

S&F in replacement of Repair to the racks after removing dents from back. Top bottom and each shelves repairs to legs and refixing by welding and making it serviceable.

After the removing of old paint, rust (by emery paper) and prepaired whole surface of rack steel adj 6 tier for painting, then apply paint one coat of red oxide paint inner & outer, then after apply one coat of spray painting to rack steel adj 6 tier inner and outer surface with synthetic enamel paint olive green (Make: Asian Berger) complete all as shown in drg/directed by Engr-in-Charge.

TABLE COMPUTER M&L, FD/E6/MAP/03/TP for carry out repair and replacement of the following parts of Executive table Computer, removing carefully the existing unserviceable / damaged parts of table computer and supply and fixed of new parts / componetns as per required size and shape to match with existing including re-assembling complete all shown in drg. and as directed by Engr -in Charge ,

S&F of Table top 18mm thick prelaminated particle baord as per existing size and shape

S&F of Bottom shelf 18mm thick particle baord as per existing size and shape

S&F sheves 18mm thick prelaminated particle baord as per existing size and shape

S&F mouse tray 18mm thickprelaminated particle baord as per existing size and shape

S&F drawer made out 18mm thick prelaminated particle baord as per existing size and shape

S&F telescopic channel as per existing size and shape for key board drawer

Rubber shoes for leg of the table

Point welding as required

Applying two coats of 1st quality synthetic enamel paint colour OG/Black(Make: Asian/Berger/Shalimar) as approved over a coat of zinc primer yellow external and internal by spray machine after prepairtaion surface to steel frame.

BOOK CASE STEEL 4 COMPARTMENT FD-1028/TP : - M&L for carrying out repair and replacement of the following parts of book case steel 4 compartment as per drg.

S&F legs base in "U" shape made out of 1.25 mm thick PBI sheet welded with electric welding machine to match with existing.

S&F door shutter made out of 1.00 mm thick MS sheet size as per drawing

S&F in replacement M S chromium plated handle 100mm as per existing pattern and design of book case all as directed and specified by GE/Engr-in-Charge.

S&F in replacement 3 way lock, 4 levers with duplicate keys MAKE : HARRISON/GODREJ and other standard makes as approved by GE all as directed and specified.

S&F Roller as exiting door size as per drawing

S&F 5.5 mm Modiguard/Atul glass sheet as existing as per drawing

After the removing of old paint, dent, rust (by emery paper) and prepaired whole surface of book case steel for painting, then apply one coat of red oxide paint inner & outer, then after apply one coat of spray painting to book case steel inner and outer surface with synthetic enamel paint olive green (Make: Asian Berger) complete all as per drg.

M/s Pee Jay Enterprises

Janeshwar Dass Narender Kumar Jain