Provn of certain sanctioned EM work at Beas under GE Kapurthala

Amount

Excavation in trenches in soft/loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for taking out and laying CI/GI pipe complete all as specified and directed.

Returing, filling in, including spreading, leveling watering and well ramming inlayers not exceeding 25 cms thick each layer complete all as specified and directed.

Removal of surplus spoil to a distance not exceeding 50 mtr away and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Taking down GI pipe 20 mm bore medium grade and fitting and supply and fixing GI tubing medium grade 20 mm bore in any length with all fitting laid in trench and connecting up with water supply main complete all as specified and directed (Excavation and earthwork shall be measured and paid for separetely under approprite item).

All as per item ser No 4 above here in before but 25 mm bore

All as per item ser No 4 above here in before but 40 mm bore

All as per item ser No 4 above here in before but 50 mm bore

Taking down old unserviceable GI/CI pipe 80 mm bore and supply, laying, jointing and testing new cast iron pipe 80 mm bore centrifugally cast class LA confirming to IS - 1536 spigot and socketed ends in any length laid in trenches complete all as specified and directed. (Note : excavation, earth work, CI fitting and new run lead joint Rubber gasket Joint shall be measured and paid for separetely under appropriate item of Sch 'A')

All as per item No 8 above here in before but 100 mm bore

All as per item No 8 above here in before but DI (K-9)100 mm bore

All as per item No 8 above here in before but 150 mm bore

All as per item No 8 above here in before but DI (K-9) 150 mm bore

Supply and fix in replacment of gun metal globe or gate valve with iron wheel head screwed both ends suitable for galvanised pipe 20 mm bore complete all as specified and directed.

All as per item ser No 13 above here in before but 25 mm bore

All as per item ser No 13 above here in before but 40 mm bore

All as per item ser No 13 above here in before but 50 mm bore

Supply and fixing in replacement cast iron fitting Suitable for CI/DI Pipes such as bends, tapers, (any type, radius and angle) tapers any type, (straight, bend, increasing,decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs tee pieces, single branch for spigot and socket and flanged pipe up to 150 mm bore complete all as specified and directed.

M&L for lead joint suitable for CI pipe 80 mm bore complete all as specified and directed.

M&L for lead joint suitable for CI pipe 100 mm bore complete all as specified and directed.

M&L for rubber Joint Suitable suitable for CI/GIpipe 80mm bore complete all as specified and directed.

M&L for rubber Joint Suitable suitable for CI/GIpipe 100 mm bore complete all as specified and directed.

M&L for rubber Joint Suitable suitable for CI/GIpipe 150 mm bore complete all as specified and directed.

M&L for lead joint suitable for CI pipe 150 mm bore complete all as specified and directed.

Supply and fixing in replacment cast iron sluice valve 80 mm bore with flanged ends, ISI mark with Gun metal spindle, CI gate with brass ring and iron wheel handle with jointing material such as nuts /bolts washers and rubber insertion sheet etc including taking out old usnv sluice valve complete all as specified and directed.

All as per srl item No 24 here in before but 100 mm dia.

All as per ser item No 24 above here in before but 150 mm bore

M & L for replacment existing cast iron double air release valve of size 80 mm bore replacement of worn out bolts, nuts gaskets if any complete all as specified and directed.

Supply and installation of silent Diesel Engine driven generating set 415 volts, 3 phase 4 wire, engine as per IS: 10001/ 10002 and Alternator as per IS:13364 complete with relay panel and switch gears for automatic starting on main failure, control panel having meter and sound proof canopy as per CPCB norms and foundation etc of capacity 30 KVA complete all as specified. Note : - Testing of Gen Set shall be carried out by contractor in the presence of Officer nominated by Accepting Officer and results shall be kept on record.

Supplying, laying, jointing and testing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 vols grade cross sectional area 35 Sqmm 4 core laid in trences, in floor, in duct, through pipes or along the pole including taking down old one complete all as specified and directed.

M&L for earthing complete with copper earth plate electrode 60×60cm.× 3.15mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to 20 x 3mm copper strip as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and as directed.

M & L for Busbar Chamber made out of copper busbar 4 pole, 415 Volt 200 Amp, 8 way complete all as specified.

Supply, fabricating, installation, commissioning, testing and electrically connected CPRI approved manufacturer LT Junction Box out door cubical type, Double door, made of 3.15 mm thick CRCA sheet steel on angle iron frame 60mm x 60mm x 40 mm of with front side hinged door, locking arrangement, vermin proof, painted with 2 coats of synthetic enamel paint over a coat of red oxide (internal& external surface) with heat shrinkable sleeves on AI bus bar 200 Amp capacity - 04 Nos providing holes (not less than ten nos of 3Ph distributions) for the connection of outgoing cables, complete wiring with thimbles and other accessories using crimping tool including foundation for fixing over PCC (1:2:4) type B-1 using 20mm graded stone aggregate foundation complete all specified and directed comprising he following :- (i) MCCB 4 pole, 415 volts of Capacity 125 Amps 16 KA - 01 No. (ii) Indicating lamps, LED type, 230 V AC - 03 Nos. (iii) Digital Voltmeter, 3 Phase - 01 No. (iv) Digital Ammeter 3 Phase - 01 No. (v) CT coils -03 Nos.

Material and labour for sand cushioning to under ground cable with a layer of sand 8 cm thick before laying of cable and 15 cm thick after laying of cable complete all as specified and directed.

Material and labour for brick protection using old size sub class ‘B’ bricks, laid flat, dry adjacent to each other laid length wise perpendicular to the axis of cable complete all as specified and directed.

Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2 of capacity 2 Ton complete all as specified.

Supply and fix Voltage stabilizer for automatic operation, single phase Each naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V-with accuracy of ± 2.5% and of capacity 5 KVA complete all as specified and directed.

Supply and Fix Single pole and neutralenclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed.

M&L for sub main wiring with two runs of single core PVC insulated, unsheathed copper condutor, multi stranded cable of size 4.0 Sqmm 1100 volts grade drawn PVC concealed conduit of size 19/20 mm (ISI marked) including PVC accessories complete incl cutting and chasing and making good etc including one run of 4.00 Sqmm single core copper conductor multi-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified and directed. Note : Two run of 4.00 Sqmm cable one run of 2.5 Sqmm cable as earth continuity conductor and one run of PVC Conduit shall be measured & paid as one unit.)

Peerzada And Sons (BID ID -3331984)

DUGGAL CONSTRUCTION CO (BID ID -3322041)