ADDN / ALTN TO CERTAIN BILLETS TO ACCOMMODATE WOMEN AGV AT AIR FORCE STATION UDHAMPUR

Amount

SCHEDULE 'A' (BR PORTION)

Taking down chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each but with shutters(without taking off shutters from the frame) complete all as specified and directed by Engr-in-Charge.

All as per item 2 above but not exc 1.5 Sqm each complete all as specified and directed by Engr-in-Charge

Cutting openings, through brick walls built in cement morter for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m complete all as specified and directed by Engr-in-Charge

Taking down cement plaster on brick or stone walls, etc incl raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed by Engr-in-Charge.

Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed by Engr-in-Charge

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling incl cement mortar bedding(but not backing) removing serviceable tiles, if any to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.

Taking up or down GI steel tubing 15 mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed by Engr-in-Charge.

Taking up or down GI steel tubing 20 mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed by Engr-in-Charge.

Dismantling water tanks and removing to store capacity exc. 1000 and n. exc. 2000 Ltrs complete all as specified and directed by Engr-in-Charge

S&F Pressed steel frames for doors made out of 1.25mm thick MS sheet with one or more rebates including necessary lugs, hinges, lock strike plate ,12mm bar threshhold etc. complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed by Engr-in-Charge

Supply and fix 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engr-in-Charge.

Material and labour for 35mm thick glazed and skelton shutters of 2nd class hardwood, open rebated and prepared to receive glass, gauze etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers as specified in SSR Part I Section 8, clause 8.24(a) complete all as specified and directed by Engr-in-Charge

Supply and fix stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-Charge

Preparation of new wood or wood based surfaces of any description not otherwise described exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed by Engr-in-Charge

Supply and fix steel window with side hung shutter incl. box type hinges with steel handle,tower bolt & steel peg stay complete with glazing bars,dovetailed or welded complete all as specified and directed by Engr-in-Charge.

Supply and fix steel window with side hung shutter incl. box type hinges with steel handle,tower bolt & steel peg stay complete without glazing bars dovetailed or welded complete all as specified and directed by Engr-in-Charge

Supply and fix Steel ventilators with top hung shutters including hinges, steel peg stay complete all as specified and directed by Engr-in-Charge

Supply and fix MS work as in grills,gratings etc with ends of bars shouldered or riveted framed guard bars barred Iron doors,ladders conforming to Fe-410-0-or 310-0 complete all as specified and directed by Engr-in-Charge

Material and labour for 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed by Engr-in-Charge

Preparation of new steel surfaces of any description not otherwise described exceeding 10 cms width or girthnot otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide or zinc chrome primer complete all as specified and directed by Engr-in-Charge

Supply and fix solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube supplying & Fixing in opening as per specification complete all as specified and directed by Engr-in-Charge

Supply and fix Factory made solid panel PVC door shutter 30mm thick (style) consisting of frmae made out of M.S tubes for top&bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail,lock rail &bottom rail on either side as gap insert for top rail&Bottom rail as per specification complete all as specified and directed by Engr-in-Charge

Supply and fix 100 mm butt hinges (ISI Marked) extruded aluminium alloy with galvanised mild steel hinge pin, anodised type B-21 complete all as specified and directed by Engr-in-Charge

Supply and fix Extruded aluminium alloy handle, fabricated type, anodised, 150 mm long (ISI marked), complete all as specified and directed by Engr-in-Charge

Supply and fix aluminium alloy sliding door bolt plate type 250 mm long stove enamelled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed by Engr-in-Charge

Supply and fix aluminium anodised barrel tower bolts (ISI Marked) of extruded section with 200 mm long boltcomplete all as specified and directed by Engr-in-Charge

All as per item No 28 above but 150 mm complete all as specified and directed by Engr-in-Charge

Material and labour for form work to sides of soffits of floors or roof beams, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc. rough finished concrete surface of concrete complete all as specified and directed by Engr-in-Charge

Material and labour for cement concrete Type C1,1:3:6 in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed by Engr-in-Charge

Material and labour for TMT steel bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge

Material and labour for TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engr-in-Charge

Material and labour for forming jambs, etc in cement mortar 1:4 etc to openings, incl cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work complete all as specified and directed by Engr-in-Charge

Material and labour for 15mm thick plastering in cement mortar 1:4 on fair faces of brick surfaces or concrete surfaces, surface finished even and smooth without using extra cement but using integral water proofing compound as per manufacturer's instructions, complete all as specified and directed by Engr-in-Charge Note : Integral water proofing compound shall be measured & paid for separately under relevent item.

Material and labour for 15 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge

Supply only water proofing compound conforming to IS 2645-1975 complete all as specified and directed by Engr-in-Charge

Material and labour for Preparation of new plastered surfaces of wall and applying two coats of distemper oil emulsion 1 mm thick wall care putty on plastered surfaces to prepare the surface even and smooth over a coat of clearcollecomplete all as specified and directed by Engr-in-Charge

Material & labour for preparation of new plastered wall surfaces and providing and applying wall care putty of 2 mm thickness over plastered/primered surfaces to prepare even and smooth and finishing walls with acrylic smooth exterior paint of required shade: New work(two or more coats) applied @ 1.67Ltr/10Sqm over and including priming coat of exterior primer applied @ 2.20 Kg/10 Sqm in Camouflage pattern) complete all as specified and directed by Engr-in-Charge

Material and labour for 25 mm thick cement concrete, type B-1, 1:2:4 (20 mm grades stone aggregate as in floors complete all as specified and directed by Engr-in-Charge.

Material and labour for non skid ceramic coloured tiles 7 to 8 mm thick ( Square or rectangular) area of each tile exc 0.06 Sqm but not exceeding 0.11 sqm, in floors over cement screed base in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge

Material and labour for Machine cut kota stone slab flooring 20-25mm thick laid over 10 mm thick rendering in cement mortar 1:3 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge

Material and labour for Machine cut kota stone slab flooring 20-25mm thick in riser of steps, skirting, dado and pillar laid jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in-Charge

Material and labour for glazed ceramic coloured tiles in vertical surface 300x 200x 7 mm thick laid over rendering 10 mm thick in cement mortar 1:3 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge

S&F of CPVC pipes outer dia 16 mm SDR 11 & Plain CPVC 11 SDR fixing on walls/ceiling or laying in floors complete all as specified and directed by Engr-in-Charge

S&F of CPVC pipes outer dia 20 mm SDR 11 & Plain CPVC 11 SDR fixing on walls/ceiling or laying in floors complete all as specified and directed by Engr-in-Charge

Excavating in trenches n.exc 1.5m wide and n.exc 1.5m in depth iand getting out in any type of soil complete all as specified and directed by Engr-in-Charge.

Material and labour for PCC type D-2,1:4:8 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed by Engr-in-Charge

Material and labour for Brick work with sub class 'B' bricks straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge

Returning, filling in including spreading levelling watering and well ramming in layers n exceeding 25 cm thick each complete all as specified and directed by Engr-in-Charge

Removing of excavated material n. exc 50m and depositing where directed at a level not exc 1.5 m above ground complete all as specified and directed by Engr-in-Charge.

Material and labour for 50 mm thick cement concrete Type C-2,1:3:6 as in plinth protection laid in alternate bays and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection complete all as specified.

Supply and fix in repairs 15 mm bore bib taps fancy type , cast copper alloy with ctutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule iron, screwed for iron pipe and fixedcomplete all as specified and directed by Engr-in-Charge

Supply and fix in repairs stop valve fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions size 15mm bore complete all as specified and directed by Engr-in-Charge

Supply and fix in repairs brass CP 'L' bed mixer hot & cold water screwed down for iron pipe of bore 15mm dia and fixed, complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs piIllar taps,fancy type chromium plated cast copper alloy, with capstan heads, chromium pated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge

Supply and fix health faucet (15mm) mild steel body with wall hook and 1.25 Mtr. SS braided rubber hose pipe with complete accessories complete all as specified and directed by Engr-in-Charge

Supply and fix in repairs PVC connection 15mm size with PTMT nuts of length 450 mm long complete all as specified and directed by Engr-in-Charge

Supply and fix in repairs 32mm dia PVC waste pipe with cap socket suitable for 32 mm waste coupling complete all as specified and directed by Engr-in-Charge

Supply and fix in repairs vitreous china wash basin, white, flat back of size 550x400mm excluding taps, waste , chain and plug but including brackets size complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs brass ball valve, for 20 mm pipe, high pressure with polythene float and fly nut screwd for pipe or brass ferrule complete all as specified and directed by Engr-in-Charge

Supply and fix in repairs vitreous china water closet (squatt pan) orrisa pattern 580x440 mm size pan white with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to 'flushing cistern/pipe complete all as specified and directed by Engr-in-Charge

Supply and fix in repairs Vitreous china wash down water closet pan ( pedestal pattern ) with 'P' or 'S' trap , white with necessary seat cover including connection to drain ( or out going pipe ) and to flushing pipe , antisyphonage pipe complete all as specified and directed by Engr-in-Charge

Supply and fix in repairs grating doom 100 mm dia with waste holes of PTMT complete all as specified and directed by Engr-in-Charge

Supply and fix in repairs Shower rose PTMT any colour for fixing with 15 mm pipe including shower arm 15 mm size 195 mm long with bend 45 degree with flange of PTMT complete all as specified and directed by Engr-in-Charge

Supply and fix brass chromium plated tubular towel rail ,20 mm dia,D type,60 cm long between flange complete all as specified and directed by Engr-in-Charge

Supply and fix PVC Flushing Cistern 10 litre capacity low level valve less, symphonic action type white with inlet, ball valve, flaoat and handle including 32mm dia PVC Flush pipe a pair of cast iron brackets duly painted/erecting stand including cutting and pinning in ends, making good disturgbed surfaces in cement mortar 1:3 including taking down unserviceable flushing cistern complete all as specified and directed by Engr-in-Charge

Supply and fix in repairs Seat and cover for pedestal pan white/black closed pattern with flat bottom and cover and MS chromium plated aluminium hinge device complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs PVC(SWR) pipes single sockets, in any length with rubber rings joints laid in trenches or in floors, 110mm dia complete all as specified and directed by Engr-in-Charge.

All as per item No 70 above but 75mm bore

Supply and fix PVC (SWR) junction single (T) equal or unequal 110mm bore with oval access door complete all as specified and directed by Engr-in-Charge

Supply and fix PVC (SWR) bends any radius 110 mm bore with oval access door complete all as specified and directed by Engr-in-Charge.

Supply and fix PVC (SWR) bends any radius 75 mm bore with oval access door complete all as specified and directed by Engr-in-Charge

Material and labour for PVC(SWR) gully trap 125/110mm bore setting and jointing with solvent cement complete all as specified and directed by Engr-in-Charge

Supply and fix 75 mm size (SWR) floor trap,plain with gratting including jointing with solvent cement complete all as specified and directed by Engr-in-Charge.

Supply and fix PVC vent cowl 75 mm dia complete all as specified and directed by Engr-in-Charge.

Supply and fix 110 mm bore PVC (SWR) junction single (single T) equal or unequal fixed with solvent cement in any position as per site requirement complete all as specified and directed by Engr-in-Charge

M&L for Cutting and screwing existing 20 mm size steel tubing for alterations or additions(or lengthening screw on pipe to form connector ) complete all as specified and directed by Engr-in-Charge

Material and labour for rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top ) hoisted and fixed in position of 1000 Ltrs complete all as specified and directed by Engr-in-Charge

All as per Item No 80 here in before but 2000 Ltrs capacity.

M&L for Mirror polishing on marble/granite/kora stone/stone work wherever required to give high gloss finish complete all as specified and directed by Engr-in-Charge

Supply and fix in repairs harrison rails mild steel chromium plated with fixing brackets, stops and rollers etc complete all as specified and directed by Engr-in-Charge

Excavating in post holes (or similar holes) each n exc 0.5 cum getting out ,returning filling in and ramming earth or broken rubble mixed with earth around ,in layers not exceeding 25 cm, watering,and removing surplus soil to a distance n exc 50 m and making good surface, Hard/dense soil complete all as specified and directed by Engr-in-Charge.

Material and Labour for joist, channel, angle, or tee sections,fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. Within 20mm of the length indicated) Fe 410-W (Gde-E- 250) quality-A complete all as specified complete all as specified and directed by Engr-in-Charge.

Supply and fix plates ( plain or chequered ) as per IS-3502 ( Base IS-10748 Gr-II ) square or rectangular cut or notched ( ordinary and counter shunk ) forming holes , without any attachment complete all as specified and directed by Engr-in-Charge

Suply and fix mild steel roof truss ( framed ) , trussed , purlins , crane gantries , rails and fastenings and heavy bracket framing ( beam , tee , angle , channel or flat sections ) including distance pieces , cleats conforming to Fe 410-W ( Gde -E-250 ) quality-A complete all as specified and directed by Engr-in-Charge .

Supply and fix mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut of 11 to 15 mm dia and exceeding 15 cm and n.exceeding 22.5 cm long complete all as specified and directed by Engr-in-Charge

M&L for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel surface exc 10 cm width or girthcomplete all as specified and directed by Engr-in-Charge .

Supply and fix Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strenght of 550 Mpa as in roof covering /cladding to wall , fixed with self tapping screw or L type or J type hook complete all as specified and directed by Engr-in-Charge.

Supply and fix Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strenght of 550 Mpa as in roof covering /cladding to wall , fixed with self tapping screw or L type or J type hook complete all as specified and directed by Engr-in-Charge..

M&L for small articles such as clamp , hold fast , wall ties /wind ties , support of valley gutters , support or stays fo rain water , ventilating pipes , including bolts if required etc made of MS flat iron conforming to Fe-290 W ( Gde E-165 ) complete all as specified and directed by Engr-in-Charge .

Material and Labour applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel surface n.exc 10 cm width or girth complete all as specified and directed by Engr-in-Charge .

Material and labour for preparation of old painted steel or steel based surfaces by any discription not other wise described, over 10 cm width or girth and applying one coat of synthetic enamel paint of any tint complete all as specified and directed by Engr-in-Charge.

Material and labour for 75 mm thick PCC 1:4:8 type D2 (using 40 mm graded aggregate) as in sub base of floor complete all as specified and directed by Engr-in-Charge.

Material and labour for chequred cement concrete tiles of size 30cm X 30 cm X 25mm thick, laid over 15mm thick screed bed or bedding layer in cement mortar 1:6 with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed by Engr-in-Charge.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and directed by Engr-in-Charge.

Removing excavated material(soil) exceeding 1.50Km but n.exc 5 Km and depositing where directed.

Material and Labour for hardcore with broken stone or boulders n.exc 63 mm gauge , deposited , spread in layer n.exc 15 cm thick , watering and ramming to a true surface complete all as specified and directed by Engr-in-Charge.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed by Engr-in-Charge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed by Engr-in-Charge

Excavating in trenches, n exc Excavating in trenches, n exc1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/loose soil complete all as specified and directed by Engr-in-Charge

Material and labour for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and directed by Engr-in-Charge

Extra for forming fair finished channel or drain 30cm inner girth in cement concrete using extra cement including mitred/stopped ends, forms mould etc, complete all as specified and directed by Engr-in-Charge

Material and labour for 150mm dia bore reinforced concrete pipes, class NP2 laid and jointed complete with collars in repairs complete all as specified and directed by Engr-in-Charge

Material and labour for Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in PCC (1:4:8) complete all as specified and directed by Engr-in-Charge

Material and labour for PCC 1:2:4 type B1 using 20mm graded stone aggregated in coping, benching ,for man holes including necessary from work and fnishing of exposed surface of concrete complete all as specified and directed by Engr-in-Charge

Material and labour for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in surface channel complete all as specified and directed by Engr-in-Charge.

Cutting into existing manholes for connecting new drains 150mm dia, making good to pipe and rendering, cutting out existing benching for and formaing branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and as directed

Material and labour for Precast cement concrete type B1 (1:2:4) using 20mm graded aggregate set in CM (1:4) in cover slabe (for manholes etc) (Reinforcement shall be measured and paid for separately) complete all as specified and directed by Engr-in-Charge

Removing excavated material exc 250 m but n exc 500 m and depositing where directed

Fixing only of chain link fencing including line wire, any mesh size and type to any type of standard rails straining bolts etc including provision of binding wire complete all as specified and directed by Engr-in-Charge

Supply only chain link MS galvanized fencing of any size or type complete all as specified and directed by Engr-in-Charge

Supply and fix MS angle iron as in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed by Engr-in-Charge

Supply and fix MS flat iron fillets (for securing chain link fencing) including all necessary drilling, bolting or riveting etc, complete all as specified and directed by Engr-in-Charge

Material and labour for Mild steel bars round bar 10mm dia and over, cut tolength, bent to shape required, includingcranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Fe-410-W 432 (Part I) (Gde.E-250) Part- I quality-A or Fe 290 (Gde -E-165) complete all as specified and directed by Engr-in-Charge

Material and Labour for form work as in sides and soffit of floor or roof beams , beam haunchings girder s , bressummers , lintels , cantilevers , shelves moulding supports , overhangs etc also splays between floor and beams etc complete all as specified and directed by Engr-in-Charge

Material and Labour for RCC M-25 Design Mix using as in foundation , plinth beams , footing , under reamed piles , bases for columns and mass concrete complete all as specified and directed by Engr-in-Charge .

Material and Labour for formwork to sides of pillars, posts,struts, piers, coloumns and stanchions, etc for rough finished surfaces of concrete,complete all as specified and directed by Engr-in-Charge .

Material and Labour for RCC M-25, design Mix, using 20mm graded crushed stone aggregate as in coloumns, pillars piers,posts and struts etc complete all as specified and directed by Engr-in-Charge.

Material and Labour for 10 mm thick plastering in cement mortar 1:4 on fair faces of brick surfaces or concrete surfaces, surface finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge

Material and labour for applying two coats of exterior acrylic paint of any shade in camouflage pattern over a coat of primer as approved by GE on new plastered surfaces of walls and the like etc and in any tint including preparation of new plastered surfaces complete all as specified and directed by Engr-in-Charge.

Material and labour for Framed work as in doors or gates of angle or other section with gusset plates, ralls, braces etc. complete drilled for fixing of steel sheeting or other covering, doors etc. to prepared for hanging or sliding with and including either hooks and hinges or steel hanging doors fittings and hanging, also fastening and fixing complete all as specified and directed by Engr-in-Charge.

Material and labour for Plain black mild steel sheeting 1.25mm thick in steel gate and straight flashing complete complete all as specified and directed by Engr-in-Charge.

SCHEDULE 'A' (E/M PORTION)

M&L for point wiring complete with PVC insulated and unsheathed cable 1.5 sqmm (nominal area) ISI marked multi-stranded copper conductor single core including ISI marked 20mm dia 'medium grade' PVC conduit for point wiring concealed in wall/false ceiling with pressed steel concealed Sunken boxes not less than 1.6mm thick of reqd size (factory painted) and with top cover 3 mm thick of Hylam sheets of required colour, painting Sunken boxes inside and out side with one coat of red oxide primer complete including 1.5 sqmm PVC insulated and unsheathed ISI marked copper cable to common earth connected to earth dolly colour coding of cable as per IE Rule including taking down complete all as specified and directed by Engr-in-Charge. [ Make of cable - Finolex / Havell's / Anchor/KEI/Polycab ]

One light/Fan/Exhaust fan point controlled by one switch

One 5 pin 5 Amp switch socket out let point on the same board with other switches

One 5 pin 5 Amp switch socket out let point on an independent board

S&F switch piano, flush type, 5 amps single pole, one way

S&F Socket outlet, flush type, 5 amps single pole, one way

Supply and fixing in repair Lamp Holder ,PVC /Polycarbonate type with back plate suitable for batten fitting complete all as specified and directed by Engr-in-Charge.

S&F in repair Ceiling rose 3 phase /PVC/polycarbonate,isolated body complete all as specified and directed by Engr-in-Charge.

M&L Sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 10.00 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 10.00 sqmm (nominal area) 1100 volts grade cable as earth wire including suitable size of PVC conduit drawn through rigid Surface concealed PVC conduit, heavey duty and connected to main board and making good disturbed surface including taking down complete all as specified and directed by Engr-in-Charge. Make of conductor : Havells/polycab/KEI Note: Two runs each of 10.00 sqmm main cable and one RM of 10.00 sqmm cable as earth wire together alongwith conduit shall be considered as 1 running metre for payment purpose.

S&F in repair indoor decorative 20 Watt LED Light fitting four feet PVC batten housing LED batten type luminaire high efficiency electronic driver, (lumen output not less than 2000 lumen), power factor more than 0.9 colour temperature not less than 6000K, LED driver with PVC insulated copper conductor complete all as specified and directed by Engr-in-Charge

Supply and fixing in repair LED light fitting 2 feet 10 watt 220 V AC decorative type with driver holder and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge. Make Havells/philips/bajaj/wipro

Supply and fixing in repair LED Bulb 7/9 Watt white Normal Holder type complete all as specifed and as directed by Engineer in Charge

S&F Recess mounting type LED indoor luminaire powder coated, CRCA or powder coated aluminium panel 2' x 2' (Appx) system wattage 35 watt to 36 watt (cool white), minimum system lumen efficacy not less than 100 lumper watt, CRI not less than80, colour temperature not less than 6000 K, power factor not less than 0.95, LED driver IP protection IP 20, powder coated housing with ashthetic bottom frame, suitable for any type of ceiling system including connection with PVC insulated copper conductor complete all as specified and directed by Engr-in-Charge.

Supply, laying, jointing and testing XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) with stranded aluminium condutor 1100 volts grade of size 35 Sqmm 3.5 core laid on walls/floors or in air with saddles and gutties including complete all as specified and directed by Engr-in-Charge.

M & L for Sand cushioning to underground cable, provided with a layer 8 cm before and 15 cm after laying and stretching jointing and testing the cable all as specified and directed. by Engineer-in-Charge.

M&LCommon burnt sub class ‘B’ brick laid flat in trenches over and across the length of cable with length of brick perpendicular to the direction of cable adjacent/abutting each other complete all as specified and directed for cable protection.

M&L in reapir of GI tube light grade of bore 40 mm with all fittings and fixed complete to walls and ceiling or laid in floor for cable crossing including cutting of bitumen roads/PCC and making good after laying of cable up to building height complete all as specified and directed by Engr-in-Charge

Supply and fixing in reapir of Building security LED street light fitting 35 Watt 6500K pf >.90 efficency 100lp/W 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp fixing of wall,pole,building with impact and corrosion resistant including thermal management in multiple optics ,suitable size bricket ,fastners, clamps etc complete with IP 65 protection complete all as specified and directed by Engr-in-Charge.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.

Supply and fixing of Steel water tubing medium grade galvanised ( ISI marked) with all fittings( such as bends elbows, Tee, short pieces, connectors back nuts, diminishing pieces, caps and plug, unions etc) complete all as specified and directed by Engr-in-Charge of following sizes:-

15mm dia

25mm dia

Supply and fixing of Gun metal globe PVC / gate valve from the pipe line and supply and fixing of gun metal globe gate valve (ISI) marked with iron wheel head, screwed both ends for iron pipe complete all as specified and directed by Engr-in-Charge for the following sizes:- ( Make: Leader / BIR / Zoloto / TATA / KSB / Kartar / Kirloskar)

25mm dia

15mm dia

Supply and fixing Angle Valve of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge

Supply and fixing of Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge

Suppply and fixing ceiling fan complete with blade,dow rods electronic regulator ,with remote controller and accessories ,230V '1200 mm sweep. Min air delivery 210CFM with service value 6.00 BEE . five star rated with brushless direct current motor (BLDC) complete all as specified and directed by Engr-in-Charge .

Supply and fixing of steel body exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete including making suitable size hole in wall and making good surface complete all as specified and directed by Engr-in-Charge.

Supply and fixing PVC Exhaust Fan 250 mm with lovour complete all as specified and directed by Engr-in-Charge.

M&L Sheet metal enclosures for DBs SPN 4 way flush mounted including accessories therein and disposing off complete all as specified and directed by Engr-in-Charge. Make:Legrand/HAVELLS / indoasian

M&L Sheet metal enclosures for DBs SPN 8 way flush mounted including accessories therein and disposing off complete all as specified and directed by Engr-in-Charge. Make:Legrand/HAVELLS / indoasian

M&L Sheet metal enclosures for DBs SPN 12 way flush mounted including accessories therein and disposing off complete all as specified and directed.

M&L of VTPN Vertical three phase distribution board, VTPN, 8 way 440 volts having IP-54 isolated busbar assembly IK 09 Mechnical impact strength door earthing protection, double door with provision for fixing of MCCBs as incomer up to 125 Amps and MCBs as outgoing complete all as specified and directed by Engr-in-Charge .

Supply and fix of MCCB 4P 100 Amps /415Volts , 16 KA having breaking capacity with complete accessories as per existing suitable size complete all as specified and directed by Engr-in-Charge

M&L MCB TPN 40 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic complete all as specified and directed by Engr-in-Charge.

M&L MCB SPN 40 to 63 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic complete all as specified and as directed.

M&L MCB SP 6-32 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic complete all as specified and directed by Engr-in-Charge.

Cutting of road (in hard/ dense soil) for laying pipe line or repair to pipes of any size upto 0.50 mtr. Depth and getting out including forming bottom surface to required level and making good the road as per existing bitumens, concrete complete all as specified and directed by Engineer-in-Charge

Taking down ceiling fan,Ceiling cable end dismantling blades and removing fan and blades to store complete all as specified and directed by Engr-in-Charge.

Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed by Engr-in-Charge.

Earthing complete with Galvanised steel earth plate electrode of size 60 cm x 60 cm x 3.15 mm thick as earth burried directly in ground (earth pit not less than 2.25 Meter deep below ground level) with top edge of the earth plate not less than 1.5mtr below ground level using copper earth lead wire 4.0 mm dia as earth continuity conductor connected to earth plate by means of copper thimbles, nuts, bolts, washers including jointing of earth electrode and earth wire by means of welding, all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and pit cover made of MS sheet 2 mm thick duly fixed to angle iron frame with hinges of appropriate size by welding and having locking arrangement, adequate quantity of charcoal dust and salt all around the earth plate, earth work in any type of soil , removing surplus excavated material all as required at site and as specified in EP No 3 of MES SSR Part-I (2009) directed by Engineer-in-charge including testing on completion.

Supply and fixing of Earth continuity conductor or main 4 mm Galvanised iron wire fixed to wall on batten or recess or chases including or drawn in conduit/pipe or fixed to poles or any other indicatedsituation for loop earthing etc complete all as specified and directed by Engr-in-Charge

MAHADEV ENTERPRISES

DAVINDER SINGH

ANIKET TRADERS

SHIVAE CONSTRUCTION

RANBIR ENTERPRISES

VISHWA MITTAR PACHYALA

APARANA ENTERPRISES

ASIA BUILDER

TARUN BUILDERS