SPECIAL REPAIRS AND ADDN/ALTERATION TO ADMIN BLOCK, TOILETS AT FIRST FLOOR AND STORE MANAGERS CABIN AT VARIOUS STORES AT CSD MAZAGAON DEPOT UNDER GE (NW) MANKHURD

Amount

Demolition of stone slab and tiles of any size and description or thickness in floors laid bedded and pointed in any mortar.

Demolition of PCC (unreinforced) in ground floor and pavings n.exc 15 CM thick and clearing of premises.

Taking down cement plaster on brick/stone or concrete surfaces including hacking for key , scrubbing down with water etc complete

Demoliton of Brickwork, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

Taking up or Taking down steel tubing and connections including cleaning for removal to store bore of pipe 15 mm

Taking up or taking down steel tubing and connections including cleaning for removal to store bore of pipe 20 mm

Dismantling water tanks and removing of premises of capacity exc 250 ltr and n.exc 500 ltr

Taking down Chowkat with Shutter (Without taking down shutters from the Frame) exceeding 1.5 Sqm and not exceding 4 Sqm

Taking down chowkat with shutter without taking off shutters from the frame n.exc 1.5 Sqm

Taking down PVC (SWR)/CI/AC pipe fixed to wall or laid in trenches in any dia

M&L for Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6)

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in CM (1:4)

Cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing complete debris materails out of defence premises as per local municipal authorties rules.

Forming jambs, etc. to openings (to foregoing item), in CM 1:6 including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete

M&L for Rolled sections/Structural Hollow sections as in lintel beams, main and cross beams, hip and jack rafters; purlins etc with or without connecting plates

M&L for providing PCC 1:3:6 type C2 40mm graded aggregate as sub base 75mm thick

M&L for rendering 10mm thick on fair faces of brick/concrete surface in CM (1:4) finished fair and even.

M&L for preparation of new plastered surfaces on walls, for preparation of distempering applying 1 mm thick (minimum) white cement based wall care putty on surfaces of walls etc, for finishing even and smooth and to make the surface in plumb line and applying two coat of oilbound distemper over a coat of primer including stopping of nails holes,cracks etc and complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm width/girth and applying two coats of synthetic enamel paint over a coat of red oxide

M&L Coloured non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm and not exceeding 0.11 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over 15mm thick screed bed in CM 1:4

M/L Coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match as in skirting dados etc over backing coat 10mm thick in CM 1:3.

S&F tubes medium grade 15mm dia, galvanised with all fittings and fixed complete to walls and ceilings or laid to floors

S&F in repairs vitreous coloured China Europeon water closet (Pedestal Pattern) including 10 ltr capacity low level flushing cistern with necessary PVC connections 15mm size with PTMT nuts of length 450mm long etc complete. Jaquar Essco Model No of EWC - ECS-WHT-551SNPP183LZ or ECS-WHT-551PNPP183LZ

S&F,in repairs Vitreous china of special colour (as approved by GE), Wash hand basin, Counter type, as per Jaquar Essco Catalogue, ECS-WHT-601 Oval type of size 530mm x 440 x 200mm complete fixed in counter opening with 15mm bore, CP, brass, pillar tap of Model no DLX-507KN, cast copper alloy, with fancy round heads, screwed down, high pressure, long screwed shanks and flynuts, screwed for iron pipe or required length with CP, brass, waste coupling of 32mm bore and fresh water connection pipe of 450mm long of 15mm bore with fibre reinforced PVC material having brass check connecting nuts & washers at both sides and all connections complete providing opening cut size granite20mm slab of matching colour in platform and supports etc all as directed by Engr- in-Charge. Note :- Granite will be measured seperately under relevant item

M&L for machine cut cudappa stone slab 20 to 25mm thickness over cement screed bed laid and jointed with grey cement slurry mixed with pigments to match the shed of the slab including rubbing and polishing complete.

M&L for 20mm thick granite of any type work (Table rubbed and polished) in platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

M&L Rounding to edges of stone slabs one edge such as in steps cooking platform,and other similar situations

M&L 20mm thick granite of any type work (Table rubbed and polished on both sides) in partitions and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite completely all as described and as directed by Engineer In Charge

S&F in repairs shower of Chromium plated any colour or fixing with 15mm pipe (minimum weight 40 Gm)

S&F for PVC (SWR) multi floor trap 75mm dia with grating including jointing with solvent cement

Labour only for Cutting chases pinning in making good to facing where required and pointing in CM (1:4) to end of edges of shelves lintels etc. and cutting chases for concealed water tubing and making good cutting not exc 10cm girth

M&L for providing and fixing toilet fittings Make : Jaquar Essco a) Bib cock with wall flange 15mm dia Model no DLX-511KN

b) Pillar cock 15mm dia Model no DLX-507KN

c) Angular stop cock 15mm dia Model no DLX-526NKN

d) Two way Bib cock with flange 15mm dia Model no DLX-512ANKN

S&F Chromium plated Towel rod 600mm long including built in side brackets Model no AEC-1111N

S&F Chromium plated Toilet paper holder Model no AEC-1151N

S&F Chromium plated Towel ring Model no AEC-1121N

S&F Chromium plated Soap dish Model no ACN-1131N

S&F 30 cm corner glass shelve 12mm thick with 'D' bracket suitable for shelves Model no ACN-1173

M&L for Swivel Mirror 630mm x 445mm Rectangular Shape with complete frame Model no AKP-35795

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to b fitted in the MS frame welded /sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cwement, supplying & fixing the frame at site.

S&F Stainless steel Butt hinges 100mm long with mild steel hinge pin, bright polished and fixed, complete all as specified

S&F aluminium anodized extruded sections handle 150mm long

S&F aluminium anodized extruded sections barrel tower bolt 150mm long

S&F aluminium alloy anodized sliding door bolt with hasp and stapple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed 300mm long

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Zsections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

M&L for 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane or fixing as louvers or in plain surface in ventilators etc

M&L for PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floors 110 dia.

All as per Item No. 50 above but 75mm dia

M&L PVC (SWR) pipes single socketed in any length with rafter joints fixed wall 110mm dia

All as per Item No. 52 above but 75mm dia

M&L for PVC (SWR) bends any radius of 110mm dia

All as per Item No. 54 above but 75mm dia

M&L for PVC (SWR) bends any radius of 110mm dia provided with access door

All as per Item No. 56 above but 75mm dia

M&L PVC (SWR) branch piece single Y equal or unequal of 110mm dia provided with access door

All as per Item No. 58 above but 75mm dia

M&L PVC (SWR) branch piece double Y double socketted of 110mm dia bore provided with access door

All as per Item No.60 above but 75mm dia

M&L PVC (SWR) Junction single, (Single T) equal or unequal of 110mm dia bore provided with access door

All as per Item No. 62 above but 75mm dia

M&L for PVC (SWR) vent cowl of 110mm dia

All as per Item No. 64 above but 75mm dia

Cutting into existing manhole for connecting new drains making good to pipe and rendering cutting out existing benching for and forming channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required internal dia of pipe 100mm maximum

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I capacity 500 Ltr complete fixed to pipe etc all as directed

M&L ball brass valves high pressure with polyuthene float valve and fly nut complete screwed for iron pipe or brass ferrule and fiexed in repairs Float valve 20mm

S&F tubes medium grade 20mm dia, galvanished with all fittings and fixed to wall

.- Ditto- ALL as per item no 68 above but fixing only

S&F Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed in repairs 20mm bore

Chipping , Removing,Carefullly Loose Concrete work by low impact Hammer/Breakar without damaging the structure & cleaning and disposal of malba out side the premises etc. complete as directed by Project Manager. Hard concrete should not be removed by force.

Providing and fixing additional steel bar in various structural elements like column ,beams and Slab etc. including drilling ,bending and fixing the bars tying with preleft binding wires etc.

M&L for Epoxy bond coat of Make Fosroc (NITOBOND-EP) OR EPOXY BONDING AGENT of Dr. Fixit OR equivalent of M/s. Krishna Conchem as approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete & new concrete by brush application, complete all as specified and directed.

Building up the profile of structural members by using polymer modified mortar thickness upto 40mm thickness including leveling profiling etc. complete. Each layer should not have a thickness more than 20 mm with epoxy latex based bond coat before each layer

Rendering (10+5mm) 15mm thick in CM 1:4 on fair face of brick /concrete surfaces finished fair and even with 3% WPC Compound in external layers

Supply only integral water proofing water compound Make - Scott No.1 conforming to IS-2645 1975.

M&L for preparation of new plastered surfaces on walls, applying 1 mm thick (minimum) white cement based wall care putty on old surfaces of walls etc, finished even and smooth, and Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

Dismantling old wooden wall pannelling and partition including framing etc complete

Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

M&L for 12mm Prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations fixed with screws to frame work

M&L for 6mm thick Sheet glass, ordinary quality and glazing with oil putty/rubber beading in square/rectangular size as required in each pane for Partitions or doors

M&L for Solar control film 50 micron reflective type (gareware sun control or equivalent)

M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified

M&L for Aluminium (die cast) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed completely all as specified and directed

Demolition of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillet

M & L for aluminium anodised suspended false ceiling in the panels of size 600 x 600 mm with aluminium anodised angle 30 x30 x 2 mm fixed along the wall and main and cross tees of size 31.75 x 31.75 x 1.6 mm screwed along side of walls fixed with wooden plugs and hanging from existing slab/ steel truss including 6 mm dia GI wire suspended adjustable level from rafter purlins(length as per site requirement) including 600 x600x 12 mm thick Gypsum boards ceiling of make - Everest/ Saint Gobain or equivalent including cutting and making suitable opening for light fittings and applying 2 coats of Oil bound destem over a coat of primer with preparation of new surface etc complete all as directed by Engineer-in-charge.

M&L for Coloured Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6

M&L for 9mm thick PVC Wall Pannelling/Ceiling fixed on GI Strips as per manufacturers instructions

Taking down copper/ aluminum point wiring surface type, concealed type (Light/Fan/Socket or power) complete including fixtures and fittings such as switches, ceiling roses, pendants, regulators, socket, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces to walls floors etc complete all as specified and directed.

M & L for point wiring complete with proper colour coding with 1100 Volts grade, 1.5 Sqmm PVC insulated FRLS, unsheathed, wire confirming to IS-694, Part II, ISI marked with multistranded copper conductor drawn in and including PVC concealed conduit of suitable size of wall/ RCC slab/ ceiling/ colunms/ beams etc with all accessories, fittings, PVC junction boxes etc, with suitabe size Modular metal flush boxes not less than 1.6 mm thick for mounting modular switches, sockets, fan regulators etc, also including 1.5 Sqmm, PVC insulated, FRLS unsheathed, 1100 Volts multistranded copper conductor green colour as contineous earth wire connected to common earth dolly for one light point/fan/bell point controlled by one way switch, complete all as specified and directed. Note : Rates included for concealed cutting as required at site without any damage and making good in CM 1:4 and matching the surface as required 2 all cadmium plated screws and washer for point wiring shall be Stainless steel. Nothing is extra shall be admisible on this account

-Ditto- all as per item No 91 above but for one 5A 2pin/3pin switch socket out let multipurpose on same board Board.

-Ditto- all as per item No 91 above but for one 5A 2pin/3pin switch socket out let multipurpose on independent Board.

All as per item No. 91 here-in-before but wiring complete with 2.5 Sqmm for 3 pin 15A socket multipurpose on independent board

S&F modular type 6A one way SP switch 1 module confirming to IS: 3854-1997 with fingure proof terminal complete all as specified and directed.

S&F modular type 2/3 pin combined shuttered type 6 Amps socket 2 module conforming to IS: 1293-2005 complete all as specified and directed.

S&F modular type 2/3 pin combined shuttered typr 16 Amps socket 2 module conforming to IS: 1293-2005 complete all as specified and directed.

S&F modular type 16 A one way SP switch 2 module confirming to IS: 3854-1997 with finguer proof terminal complete all as specified and directed.

S & F Modular Blank plate 1 module suitable for Modular switch boards all as specified and as directed

S & F Modular cover plate 8 modules

S & F Modular cover plate 6 modules

S & F Modular cover plate 3 modules

S & F in repairs Ceiling Rose, surface bakelite, three terminals, AC, 230 Volts

S & F in replacement MCB DB, 8 way, SPN, double door, 240 Volts and including cutting chases in wall, concealing DB in wall, making good the disturbed surfaces and making all connections complete all as specified and directed. Note: Quoted rate shall be deemed to include for provision of copper bus bar of 200 Amps rating.

S & F in replacement MCB DB, 4 way, SPN, double door, 240 Volts and including cutting chases in wall, concealing DB in wall, making good the disturbed surfaces and making all connections complete all as specified and directed. Note: Quoted rate shall be deemed to include for provision of copper bus bar of 200 Amps rating.

S & F MCB SPN 32 Amps, 240 / 415 Volts, 50 Hz, 10 KA Breaking capacity

S & F MCB SP 5 to 20 Amps, 240 / 415 Volts, 50 Hz, 10 KA Breaking capacity

Supply and fix decorative recessed type LED light fitting 35/36 watt (size 2'x2') and including driver unit, including provision of 3 core copper flexible cable 1.5 Sqmm from ceiling rose to connector, including making addition/altn to existing false ceiling and providing of false ceiling sheets, aluminium frames including fixing arrangements complete etc.

S&F in repairs Surface, hanging and wall mounted batten (Double side connection) suitable for LED tube 20/22 watts, 230 volts alongwith tube rod 20/22 watt (double side connection), including fixing mounting blocks 2 Nos, 15 mm MS conduit, 1.5 sqmm 3 core pvc insulated copper conductor cable including fixing arrangements complete all as specified and directed

Supply and fixing in replacement of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including provision with three core flexible copper conductor cable of suitable size and PVC square blocks complete all as specified and directed by Engr-in-Charge. Make : Shakti/Crompton/Havells

Supply and fixing in replacement of LED bulkhead light fitting 10 watt, 220 V AC, CCT 5700 with K opal diffuser, equipped with 2 kv in built surge protection with IP 65 protection rating including provision with three core flexible copper conductor cable of suitable size and PVC square blocks complete all as specified and directed

S& F in replacement of GI steel tubing medium grade 40 mm dia and length up to 1.5 meter bent to shape of offset angle upto 45degree for fixing of security /street light fittings including MS clamps made of 32mm x5mm flat iron, nuts , bolts, etc all as directed by Engineer in charge

S&F in repair/replacement of building Security light fitting 35/36 Watt made up of pressure die cast alluminium body with mid power LED as lighting sources and PC cover having Top opening separate driver compartment with IP 65 protection and impact resistance of IK 07 including fixing arrangements and taking down old rusted bracket fittings complete all as per directed by Engr- in – charge.

Supply and fix fans ceiliing with BLDC motor complete with blade, canopy, down rod, mounting hook, rubber insulator etc, the colour of fan shall be of Elegant White/Dubai white/ White CF with remote control alongwith batteries and accessories 230 V, 1200 mm sweep, 26/28/32 watt, BEE 5 Star rated complete including takingdown old unserviceable fan all as directed by Engr-in-Charge. Make : Havells (Efficiencia Neo (BLDC 26 W) /Orient / Bajaj / Panasonic (Captor i-Kraft) Note : Unserviceable ceiling fans shall be deposit to MES store.

S&F single pole and neutral enclosure with a two pin and earth and metal clad plug socket complete with one single pole MCB 20 Amp 240 Volts complete all as specified including concealing in wall and directed.

M & L for Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers all as shown in Electrical Plate No.3 connected to earthing test point all as specified or indicated including testing on completion.

M&L for sub main wiring with two single core 6.0 Sqmm PVC insulated FRLS multistranded flexible copper conductor cable 660/1100 volts grade down in through non metalic PVC casing caping with and including PVC insulated 6 Sqmm single core single strand copper conductor as continous earth wire in green colour connected to common earth dolly all as specified and as directed Note : 1. Two runs of cable, one run of earth wire, one run of PVC casing capping will be measured and paid one unit.

Supply & fix sturdy Engineering plastic Exhaust fan complete with louvers shutter of sweep 250 mm, 1200 RPM with frames, blades, mounting anchor fasterners with provision of three core 1.5 sqmm copper cable from ceiling rose to fan , making opening of requird size in Aluminium window for fixing of exhaust fan complete all as specified and directed.

Excavation in trenches not exceeding 1.50 m wide and n.exc 1.5 m in depth for foundation of poles, cable etc, not exc 10 sqm on plan and getting out in soft/loose soil including taking out brick protection etc complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick complete all as specified and directed.

Removing excavated materials (soils) not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.

M & L for sand cushioning by spreading in trenches crushed sand by gently by punning down manually as in cable protection all as specified and as directed by Engineer -in-charge.

Supply and laying un-reinforced precast concrete cable cover class LV, type-I, flat size 250 mm x 150 mm x 40 mm laid in trenches all as specified.

Supply and Laying or fixing or passing through pipe, XLPE/PVC insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 25 Sqmm 4 core including necessary connection and providing cable lugs as required all as specified. Note : A sum of Rs 17435.00 towards sch of credit shall be deducted to arrive the contract sum.

mp construction co

AM ENTERPRISES

Advait Enterprises