SPL REPAIRS TO 12 SQN HQ COMPLEX AND SPL REPLACEMENT OF ALUMINIUM OVER SURFACE WIRING INTO CONCEALED COPPER WIRING AT 2225 SQN A FLT

Amount

Taking down door chowkhat with shutter area n.exc 1.5 Sqm each(without taking off shutters from the frame) complete all as specified and as directed

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and shown in drg in SSR Part -II 2010 complete all as specified and as directed

S&F factory made solid panel PVC door shutter 30mm thick consisting of frame made out of MS frame shall be covered with heat moulded plain cover PVC 'C' channel having a PVC sheet strip of 20mm with struck in side with solvent cement for styles and plain colour PVC sheet for top rail lock rail and bottom rail and either side as gap inserted for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles and rails with suitable PVC sheet beading sheet and jointed together with solvent cement in frame at site as per specification and shown in drg in SSR Part -II 2010 complete all as specified and as directed.

S&F 150 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed

S&F 100mm long Aluminium butt hinges of extruded aluminium alloy with galvanized mild steel hinge, pin anodized complete all as specified and as directed.

S&F 150 mm long aluminium anodised handle fabricated type complete all as specified and as directed.

Taking down chowkhats or frames with shutters exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutters from the frame) complete all as specified and as directed.

S&F Aluminium door shutter with frame single leaf with anodized/powder coated aluminium frame of section 62.5x37x1.5mm thick, shutter with bottom & top rail of section 112.50x 43x1.5mm thick and styles & middle rail of section 83x43x1.5mm thick with centrally locking arrangement with lock make of ‘GODREJ’ or ‘LINK’ 7 lever and self closing device with rebate including jointing cleats, rubber beading and fixing of builders hardware fittings, necessary numbers of stainless steel 100mm hinges-03 Nos, 200mm stainless steel handles -02 Nos, 150mm long aluminium anodized tower bolt - 02 Nos, 140mm long floor door stopper, rubber bushes etc in each shutter complete all as specified and as directed.

S&F aluminium (Die cast ) body door closer hydraulically regulated designation No-3 universal type suitable for door shutters of 850 to 1000mm in width and of weight between 61 to 80 kg

S&F anodised aluminium powder coated window and ventilator shutters with frame, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) in each shutter complete all as specified and as directed.

S&F for aluminium anodized powder coated grills with 6 x 5 mm aluminium section having square gap of 50 mm thick with fixing rails of channels 12-15 mm complete all as specified and as directed.

S&F 5.5mm thick sheet glass ordinary quality for Aluminium frames fixed with aluminium cleat and rubber beading in each pane n.exc 0.50 sqm each complete all as specified and as directed

S&F 5mm thick figured/frosted glass ordinary/printed quality for Aluminium frames fixed with aluminium cleat and rubber beading in each pane n.exc 0.50 sqm each complete all as specified and as directed

S&F in repairs 25 mm dia mild steel PVC coating drapery rod complete all as specified and as directed

S&F mild steel PVC coating bracket/ holder for drapery rod fixed with screws all as specified and as directed

Taking down existing aluminium doors/windows and re-fixing after tightening loose screw including replacement of unserviceable screw, aluminium cleat, rubber beading, rubber bushes etc (including taking down carefully glass panels & re-fixing the same and other hardware fitting such as hinges, tower bolt , handle etc all as specified and as directed

M&L double action floor spring hydraulically regulated made up minimum 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty including taking down unserviceable floor spring complete all as specified and as directed.

S&F 5mm thick sheet glass in aluminium doors & windows with rubber packing including hacking out old broken glass (any thickness, size from aluminium beading) complete all as specified and as directed.

S&F in repair aluminium (Die cast ) body door closer hydraulically regulated designation No-3 universal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg complete all as specified and as directed.

S&F in repair mortice lock vertical type & 4- levers of 100mm brass body with two keys complete all as specified and as directed.

S&F in repair butt hinges, medium weight, cold rolled mild steel, 100mm size complete all as specified and as directed

S&F in repair aluminium anodised, barrel tower bolt of size 100 mm long of extruded section and fixed complete all as specified and as directed

S&F in repair aluminium handle, 125 mm long , cast type, anodised complete all as specified and as directed

S&F in repair floor door stopper of 150mm long aluminium alloy body and tongue, anodised with and hard drawn steel spring fixed in door complete all as specified and as directed

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

M&L for solid PVC wall lining consisting of 5.00mm thick single site prelam PVC sheet inclusive of insolvent cement and fixing at site on PVC frame complete all as specified and as directed

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame complete all as specified and as directed

S&F PVC beading fix with adhesive paste all as per manufacturer's instructions complete all as specified and as directed.

S&F 605mm x 605mm anodised aluminium snap grid frame work for false ceiling complete all as specified and as directed

S&F of 4 mm thick non asbestos fibre cement building board of approved make in ceiling fixed to aluminium snap grid frame work with hold screws as per manufacturer's instructions complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding and removing rubbish off the premises complete all as specied and as directed

M&L for coloured, glazed ceramic tiles 300X 200X 7mm thick in vertical surface as in dado and skirtings with and including 10mm thick rendering in cement mortar (1:4) and jointing in neat cement slurry and pointing in coloured cement to match complete as specified and as directed

Demolition of PCC (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for 25mm thick PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in sub base of floors and the likes; complete all as specified and as directed

M&L for light shade coloured virified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. with and including 15mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed

M&L for light shade coloured virified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirtings and the likes; with and including 10mm thick screed bed in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed

M&L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in sub base of floors and the likes; complete all as specified and as directed.

M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry (with grey cement and pigment) as in floors with and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed

Dismantling of Stone slabs and tiles of any description or thickness in floors/wall, aprons etc. layed, bedded and pointed complete all as specified and as directed.

M&L for 20mm thick machine cut kota stone slab flooring over and including 15mm thick screed bed in cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed

M&L for granite 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, jombs, pillars, window-cill, cooking plateform and like in cement mortar (1:4) and with white cement (1:2) using pointing marble dust with admixture of pigment to match, including moulding of granite complete all as specified and as directed

Taking down cement plaster of any description on brick work or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 finishing the surface fair & even complete all as specified and as directed

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of cement wash complete all as specified and as directed.

M&L for preparation of surfaces New/old decorated by complete removal of existing treatment of plastered or un-plastered surfaces of walls and applying two coats of distemper oil emulsion white or tinted, over and including a coat of wall care putty ,including preparation to distempering complete all as specified and as directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 finishing the surface even and smooth without using extra cement complete all as specified and as directed

S&F UPVC modular door shutter with 8mm toughened glass single leaf frame of section 62mm thick, shutter with bottom & top rail of section 76mm thick and styles & middle rail of section 76mm thick with centrally locking arrangement with lock make of ‘GODREJ’ or ‘LINK’ 7 lever and self closing device with rebate including jointing cleats, rubber beading and fixing of builders hardware fittings, necessary numbers of stainless steel 100mm hinges-03 Nos, 200mm stainless steel handles -02 Nos, 150mm long stainless steel tower bolt - 02 Nos, 140mm long floor door stopper, rubber bushes etc in each shutter complete all as specified and as directed.

Taking down carefully Aluminium/copper/Flamp proof point wiring (Light/ Fan/Socket or power) complete including fitting fixture such as switches, sockets, ceiling rose, brackets, holders, bulk head fitting etc and making good disturbed surface of wall/ceiling etc., all as specified and as directed

Taking down main switch/MCB DB/AC enclosure/Three phase enclosure by disconnecting the electric supply complete all as specified and as directed.

Taking down old unserviceable sub main wiring 4 Sqmm/6 Sqmm/10 Sqmm aluminium/copper including batten/conduit and making good disturbed surface to match the existing surface complete all as specified and as directed.

M&L for point wiring complete with stranded copper conductor 1.5 Sqmm size (Nominal area) PVC insulated unsheathed cable FR in and including PVC conduit ISI marked not less than 20mm dia with concealed sunk in pressed steel terminal boxes of required size of thickness 1.6 mm factory made and painted with stove enameled black paint with top cover 3mm thick plastic laminated sheet of required colour fixed with brass screws and cup washer including 1.5 sqmm stranded copper conductor PVC insulated cable of green colour as earth continuity connected to common earth dolly and all sunk/terminal boxes and each fitting/fixture, complete with all accessories all as specified and as directed: -

One light/fan/exhaust fan point controlled by one way 5 Amp switch complete all as specified and as directed.

One 3 pin/5 pin socket out let 5 Amp on independent board complete all as specified and as directed.

One 3 pin/5 pin socket out let 5 Amp on same board complete all as specified and as directed.

All as per srl item no. 51.00 above but for 3/5 pin socket outlet for 15 Amps on independent board with 2.5 sqmm PVC insulated, unsheathed single core multistranded copper conductor cable 1100 volts grade including 2.50 sqmm PVC insulated unsheathed multi stranded copper conductor cable as earth continuity conductor complete all as specified and as directed.

M&L for point wiring complete with stranded copper conductor 4 Sqmm size (Nominal area) PVC insulated unsheathed cable FR in and including steel conduit ISI marked not less than 25mm dia with concealed sunk in pressed steel terminal boxes of reqd size of thickness 1.6 mm factory made and painted with stove enameled black paint with top cover 3mm thick plastic laminated sheet of required colour fixed with brass screws and cup washer including 4 sqmm stranded copper conductor PVC insulated cable of green colour as earth continuity connected to common earth dolly and all sunk/terminal boxes and each fitting/fixture, complete with all accessories complete all as specified and as directed

S&F switch piano, flush type 5 Amp single pole one way complete all as specified and as directed.

S&F socket out let, flush type 5 pin 5 Amp complete all as specified and as directed.

S&F switch piano, flush type 15 Amp complete all as specified and as directed.

S&F socket outlet multi purpose 3 pin 15 Amp and 3 pin 5 Amp, flush type complete all as specified and as directed.

S&F ceiling rose surface bakelite 32mm x 25mm, 2 to 3 terminals complete all as specified and as directed.

S&F stepped type Electronic fan regulator flush type complete all as specified and as directed

S&F in renewal/replacement of LED Pluto panel (surface) aesthetical designed 2'x2' LED 42W flat panel for surface mounting which provides soft-light and glare free symmetrical illumination and fixutre size in mm (LxWxH) 600mm x 600mm x 70 mm (2'x2') including neccessary arrangement compelet all as specified and as directed. Make :- Havells (Cat Part No LHEWEIP7PN1W042) or equivalent in CG/Bajaj and approved.

S&F 5 mtr long, 24 watt LED Flexi Strip uses for high brightness SMD LED as the light source for indoor application complete all as specified and as directed. Make :- Havells cat No- FLEXISTRIP5MTRIP2024WLED830S or equivalent in CG/Bajaj and approved

S&F Flexi Strip Driver for 24 w LED strip complete all as specified and as directed. Make- Havell Cat No-FLEXISTRIPDRIVER24WS/CG/Bajaj or equivalent in CG/Bajaj and approved

S&F surface/wall mounting LED batten,extruded aluminium housing provided for efficient heat dissipation with poly carbonate diffuser & intergrated electronic driver including 20 watt LED lamp complete all as specified and as directed. Make- Havells or Bajaj/CG

Refixing of surface/wall mounting LED batten,extruded aluminium housing provided for efficient heat dissipation with poly carbonate diffuser & intergrated electronic driver including 20 watt LED lamp complete all as specified and as directed.

S&F Wall Fans AC single phase 230/240V of size 400mm sweep, model : Swing Platina HS including taking down old U/S wall fan and depositing in MES store and necessary arrangement complete and all as specified and directed. Make: Havells /Bajaj/ CG

S&F ceiling fans AC single phase 230/240V of size 1200mm sweep, model : Fusion-50 (5 Star), colour metallic Beigebrown /Pearl Ivory gold including taking down old unserviceable fan and depositing to MES store complete all as specified and as directed. Make :- Havells/ Bajaj/Crompton Greaves

S&F lamp holder, insulated body any type with back plate suitable for batten/ angle fittings complete all as specified and as directed

S&F LED Retrofit lamp 12 W complete all as specified and as directed. Make : CG/Bajaj/Osram/Phillips/Havells

M&L for sub main wiring drawing in and including PVC conduit not less than 20mm dia medium grade with PVC cable 6 Sqmm nominal area 2 single core PVC insulated unsheathed cable with stranded copper conductor incl 6 Sqmm size PVC cable stranded copper conducter as earth continuity wire and connected to earth dolly complete all as specified and as directed Note :- Two run of 6.00 sqmm cable and one run of 6.00 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid as one unit length.

S&F MCB TPN DB, 4 way Vertical type, 440V, 3 phase with rated busbar 250 Amps, double door type included for MCCB 63 amp as a incomer and MCBs as out going ,IP 54-IK 09 with metal door double door type ,grouted in walls with PCC 1:2:4 type B1 using 20mm graded stone aggregate complete all as specified and as directed. Make-Legrand cat No-5077 50 or equivalent in C&S,Havells

M&L for MCB DB of sheet metal enclosure double door type, single pole and neutral 8 way with 200 Amp rated bus bar 240V and grouted in walls with PCC 1:2:4 type B1 using 20mm graded stone aggregate complete all as specified and as directed.

M&L for MCB DB of sheet metal enclosure double door type, single pole and neutral 4way with 200 Amp rated bus bar 240V and grouted in walls with PCC 1:2:4 type B1 using 20mm graded stone aggregate complete all as specified and as directed.

S&F sheet metal enclosures with socket plug top and MCB single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20Amp MCB ,240 volts complete all as specified and as directed

S&F MCB SP 6 to 32 Amps, 240V 'C' Series 10 KA complete all as specified and as directed. Make- Legrand

S & F MCB SPN 40 to 63 Amp 240 Volts 'C' series 10 KA complete all as specified and as directed. Make - Legrand

M & L earthing complete with Gl electrode 600x600x6.00mm thick buried directly in ground vertically in pit of depth not less than 3.75 mtr below normal ground level with top edge of the earth plate not less than 3.00 mtr below normal ground level connected to Gl strip 30x5 mm as earthing lead by means of bolts, nuts, check nuts and washers of brass connected all as specified including excavation and earth work and disposal of surplus soil incl 40 mm Gl tubing light grade and necessary fitting for protection of Gl strip incl laying of charcoal, dust and common salt PCC (1:2:4) type Cl using 20mm graded stone aggregate earth pit with 40x40x6mm MS angle iron frame RCC cover 40mm thick (1:2:4) type B0 using 12.5mm graded stone aggregate reinforced with 8mm dia round bar @ 75mm C/C both way with MS handle 12mm dia, plastering 15mm thick CM (1:6:) internally and upto 150mm below ground level externally. Funnel with wire mesh 20mm dia Gl pipe for watering complete all as shown on electrical plate No.3 of SSR Part -1 2009 and connected to earth test point including testing complete all as specified and as directed Note :- GI strip upto distance 7.5 mtr shall deemed to be included in quoted rate by contractor

Rakesh kumar

GIRENDRA SINGH AND CO